summaryrefslogtreecommitdiff
path: root/converter/adb_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/adb_usb')
-rw-r--r--converter/adb_usb/README.md105
1 files changed, 56 insertions, 49 deletions
diff --git a/converter/adb_usb/README.md b/converter/adb_usb/README.md
index 21ad318c1d..46082ff67f 100644
--- a/converter/adb_usb/README.md
+++ b/converter/adb_usb/README.md
@@ -7,70 +7,69 @@ But binary size is about 10KB or more it doesn't fit into 8K flash like ATMega8U
Discuss: http://geekhack.org/showwiki.php?title=Island:14290
+
+README FIRST
+------------
+https://github.com/tmk/tmk_keyboard
+https://github.com/tmk/tmk_keyboard/tree/master/converter/adb_usb
+
+Also check these when you are in trouble.
+
+https://github.com/tmk/tmk_keyboard/wiki
+https://github.com/tmk/tmk_keyboard/labels/NOTE
+
+
Wiring
------
-0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data). By default Data line uses port PD0.
- This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable.
- The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.
-1. Define following macros for ADB connection in config.h if you use other than port PD0.
- ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
-2. make
-3. program Teensy
+Connect ADB pins to controller just by 3 lines(Vcc, GND, Data). By default Data line uses port PD0.
+
+ADB female socket from the front:
+
+ ,--_--.
+ / o4 3o \ 1: DATA
+ | o2 1o | 2: Power SW
+ - === - 3: VCC
+ `-___-' 4: GND
+
+This converter uses AVR's internal pull-up, but it seems to be too weak, in particular when you want to use a long or coiled cable. The external pull-up resistor(1K-10K Ohm) on Data is strongly recommended.(It is almost must!)
+https://github.com/tmk/tmk_keyboard/wiki/FAQ#pull-up-resistor
+
+Pull-up resister:
+
+ Keyboard Conveter
+ ,------.
+ 5V------+------|VCC |
+ | | |
+ [R] | |
+ | | |
+ Signal--+------|PD0 |
+ | |
+ GND------------|GND |
+ `------'
+ R: 1K Ohm resistor
+
+
+Define following macros for ADB connection in config.h if you use other than port PD0.
+
+ ADB_PORT, ADB_PIN, ADB_DDR, ADB_DATA_BIT
Build
-----
-Just make
+See doc/build.md. In short,
$ make clean
$ make
-If your keyboard is ISO layout
+You can select keymap(ansi is default) like this:
- $ make KEYMAP=iso
-
-
-LOCKING CAPSLOCK
-----------------
-Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.
-
-Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
-http://www.youtube.com/watch?v=9wqnt2mGJ2Y
+ $ make KEYMAP=[ansi|iso|hasu]
Keymap
------
-You can change a keymap by editing code of keymap.c like following.
-This is a keymap for AEK, however, also used for other keyboards.
-How to define the keymap is probably obvious. You can find key symbols in keycode.h.
-If you want to define some keymaps than just one, see hhkb/keymap.c and
-macway/keymap.c as examples. Keymap(layer) switching may needs a bit of
-effort at this time.
-
- /* Default Layer: plain keymap
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|
- * `---' `---------------' `---------------' `---------------' `-----------' `---'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| =| /| *|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| -|
- * |-----------------------------------------------------------| `-----------' |---------------|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| +|
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Alt |Gui | Space |Gui |Alt |Ctrl | |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,EQL, PSLS,PAST,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PMNS,
- LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
+You can change a keymap by editing code of keymap_[ansi|iso|hasu|yours].c.
+How to define the keymap is probably obvious. You can find key symbols in common/keycode.h. And see doc/keymap.md for more detail.
Magic command
@@ -78,6 +77,14 @@ Magic command
To get help press `h` holding Magic key. Magic key is `Power key`.
+Locking CapsLock
+----------------
+Many of old ADB keyboards have mechanical push-lock switch for Capslock key and this converter supports the locking Capslock key by default. See README in top directory for more detail about this feature.
+https://github.com/tmk/tmk_keyboard/blob/master/README.md#mechanical-locking-support
+
+Also you may want to remove locking pin from the push-lock switch to use capslock as a normal momentary switch.
+
+
Notes
-----
Not-extended ADB keyboards have no discrimination between right modifier and left one,