summaryrefslogtreecommitdiff
path: root/common/bootloader.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/bootloader.c')
-rw-r--r--common/bootloader.c116
1 files changed, 88 insertions, 28 deletions
diff --git a/common/bootloader.c b/common/bootloader.c
index 6e04efbbda..43a7e47ce2 100644
--- a/common/bootloader.c
+++ b/common/bootloader.c
@@ -1,45 +1,106 @@
+#include <stdint.h>
+#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
+#include <avr/wdt.h>
#include <util/delay.h>
#include "bootloader.h"
-/* Start Bootloader from Application
- * See
- * http://www.pjrc.com/teensy/jump_to_bootloader.html
- * http://www.fourwalledcubicle.com/files/LUFA/Doc/120219/html/_page__software_bootloader_start.html
+#ifdef PROTOCOL_LUFA
+#include <LUFA/Drivers/USB/USB.h>
+#endif
+
+
+/* Boot Section Size in *BYTEs*
+ * Teensy halfKay 512
+ * Teensy++ halfKay 1024
+ * Atmel DFU loader 4096
+ * LUFA bootloader 4096
+ * USBaspLoader 2048
*/
+#ifndef BOOTLOADER_SIZE
+#warning To use bootloader_jump() you need to define BOOTLOADER_SIZE in config.h.
+#define BOOTLOADER_SIZE 4096
+#endif
-// TODO: support usbasp
-/* Boot Section Size in bytes
- * Teensy halfKay 512
- * Atmel DFU loader 4096
- * LUFA bootloader 4096
+#define FLASH_SIZE (FLASHEND + 1L)
+#define BOOTLOADER_START (FLASH_SIZE - BOOTLOADER_SIZE)
+
+
+/*
+ * Entering the Bootloader via Software
+ * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
*/
-#ifndef BOOT_SIZE
-#define BOOT_SIZE 512
+#define BOOTLOADER_RESET_KEY 0xB007B007
+uint32_t reset_key __attribute__ ((section (".noinit")));
+
+/* initialize MCU status by watchdog reset */
+void bootloader_jump(void) {
+#ifdef PROTOCOL_LUFA
+ USB_Disable();
+ cli();
+ _delay_ms(2000);
+#endif
+
+#ifdef PROTOCOL_PJRC
+ cli();
+ UDCON = 1;
+ USBCON = (1<<FRZCLK);
+ UCSR1B = 0;
+ _delay_ms(5);
#endif
-#define FLASH_SIZE (FLASHEND + 1)
-#define BOOTLOADER_START (FLASHEND - BOOT_SIZE)
+ // watchdog reset
+ reset_key = BOOTLOADER_RESET_KEY;
+ wdt_enable(WDTO_250MS);
+ for (;;);
+}
+
+/* this runs before main() */
+void bootloader_jump_after_watchdog_reset(void) __attribute__ ((used, naked, section (".init3")));
+void bootloader_jump_after_watchdog_reset(void)
+{
+ if ((MCUSR & (1<<WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
+ reset_key = 0;
+
+ // My custom USBasploader requires this to come up.
+ MCUSR = 0;
+
+ // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
+ MCUSR &= ~(1<<WDRF);
+ wdt_disable();
+
+ ((void (*)(void))BOOTLOADER_START)();
+ }
+}
+
+
+#if 0
+/* Jumping To The Bootloader
+ * http://www.pjrc.com/teensy/jump_to_bootloader.html
+ *
+ * This method doen't work when using LUFA. idk why.
+ * - needs to initialize more regisers or interrupt setting?
+ */
void bootloader_jump(void) {
+#ifdef PROTOCOL_LUFA
+ USB_Disable();
cli();
+ _delay_ms(2000);
+#endif
- //
- //Teensy
- //
-#if defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U4__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
- // disable watchdog, if enabled
- // disable all peripherals
+#ifdef PROTOCOL_PJRC
+ cli();
UDCON = 1;
- USBCON = (1<<FRZCLK); // disable USB
+ USBCON = (1<<FRZCLK);
UCSR1B = 0;
_delay_ms(5);
-#else
- // This makes custom USBasploader come up.
- MCUSR = 0;
#endif
+ /*
+ * Initialize
+ */
#if defined(__AVR_AT90USB162__)
EIMSK = 0; PCICR = 0; SPCR = 0; ACSR = 0; EECR = 0;
TIMSK0 = 0; TIMSK1 = 0; UCSR1B = 0;
@@ -62,10 +123,9 @@ void bootloader_jump(void) {
PORTA = 0; PORTB = 0; PORTC = 0; PORTD = 0; PORTE = 0; PORTF = 0;
#endif
-
- //
- //USBasp
- //
+ /*
+ * USBaspLoader
+ */
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
// This makes custom USBasploader come up.
MCUSR = 0;
@@ -81,7 +141,7 @@ void bootloader_jump(void) {
ADCSRA = 0; TWCR = 0; UCSR0B = 0;
#endif
-
// start Bootloader
((void (*)(void))BOOTLOADER_START)();
}
+#endif