summaryrefslogtreecommitdiff
path: root/adb
diff options
context:
space:
mode:
Diffstat (limited to 'adb')
-rw-r--r--adb/Makefile82
-rw-r--r--adb/README62
-rw-r--r--adb/config.h47
-rw-r--r--adb/keymap.c140
-rw-r--r--adb/matrix.c200
5 files changed, 0 insertions, 531 deletions
diff --git a/adb/Makefile b/adb/Makefile
deleted file mode 100644
index c27c75e15d..0000000000
--- a/adb/Makefile
+++ /dev/null
@@ -1,82 +0,0 @@
-# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = tmk_adb
-
-# Directory common source filess exist
-COMMON_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-TARGET_SRC = keymap.c \
- matrix.c \
- adb.c
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
-#USB_NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-include $(COMMON_DIR)/Makefile.common
diff --git a/adb/README b/adb/README
deleted file mode 100644
index b4bd35bb33..0000000000
--- a/adb/README
+++ /dev/null
@@ -1,62 +0,0 @@
-ADB to USB keyboard converter
-=============================
-http://geekhack.org/showwiki.php?title=Island:14290
-
-This firmware converts ADB keyboard protocol to USB.
-
-
-Build
------
-0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data).
- You need a external pull-up resistor on DATA line in most case,
- in particular when you want to use a long or coiled cable.
- This converter uses AVR's internal pull-up, but it seems to be too weak.
- The external pull-up resistor is strongly recommended.
- PSW line is optional. See ADB.txt for details.
-1. Define following macros for ADB connection in config.h:
- ADB_PORT
- ADB_PIN
- ADB_DDR
- ADB_DATA_BIT
- ADB_PSW_BIT
-2. make
-3. program Teensy.
-
-
-Keymap
-------
-You can change a keymap by editing code of keymap.c like following.
-This is a keymap for AEK, however, also used for other keyboards.
-How to define the keymap is probably obvious. You can find key
-symbols in usb_keycodes.h.
-If you want to define some keymaps than just one, see hhkb/keymap.c and
-macway/keymap.c as examples. Keymap(layer) switching may needs a bit of
-effort at this time.
-
- /* Default Layer: plain keymap
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|
- * `---' `---------------' `---------------' `---------------' `-----------' `---'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| =| /| *|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| -|
- * |-----------------------------------------------------------| `-----------' |---------------|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| +|
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Gui |Alt | Space | | | | |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,EQL, PSLS,PAST,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PMNS,
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-
-
-EOF
diff --git a/adb/config.h b/adb/config.h
deleted file mode 100644
index 099a24bfa8..0000000000
--- a/adb/config.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* controller configuration */
-#include "controller_teensy.h"
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0ADB
-#define MANUFACTURER t.m.k.
-#define PRODUCT ADB keyboard converter
-#define DESCRIPTION convert ADB keyboard to USB
-
-/* matrix size */
-#define MATRIX_ROWS 16 // keycode bit: 3-0
-#define MATRIX_COLS 8 // keycode bit: 6-4
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* USB NKey Rollover */
-#ifdef USB_NKRO_ENABLE
-#endif
-
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-# define MOUSEKEY_DELAY_TIME 192
-#endif
-
-/* PS/2 mouse */
-#ifdef PS2_MOUSE_ENABLE
-# define PS2_CLOCK_PORT PORTF
-# define PS2_CLOCK_PIN PINF
-# define PS2_CLOCK_DDR DDRF
-# define PS2_CLOCK_BIT 0
-# define PS2_DATA_PORT PORTF
-# define PS2_DATA_PIN PINF
-# define PS2_DATA_DDR DDRF
-# define PS2_DATA_BIT 1
-#endif
-
-/* ADB port setting */
-#define ADB_PORT PORTF
-#define ADB_PIN PINF
-#define ADB_DDR DDRF
-#define ADB_DATA_BIT 0
-//#define ADB_PSW_BIT 1 // optional
-
-#endif
diff --git a/adb/keymap.c b/adb/keymap.c
deleted file mode 100644
index 05ab4c4526..0000000000
--- a/adb/keymap.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Keymap for ADB keyboard
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "usb_keyboard.h"
-#include "usb_keycodes.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap_skel.h"
-
-
-#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
-
-// Convert physical keyboard layout to matrix array.
-// This is a macro to define keymap easily in keyboard layout form.
-/* Apple Extended Keyboard */
-#define KEYMAP( \
- K35, K7A,K78,K63,K76, K60,K61,K62,K64, K65,K6D,K67,K6F, K69,K6B,K71, K7F, \
- K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K72,K73,K74, K47,K51,K4B,K43, \
- K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K75,K77,K79, K59,K5B,K5C,K4E, \
- K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K45, \
- K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K7B, K3E, K53,K54,K55, \
- K36,K3A,K37, K31, K3B,K3D,K3C, K52, K41,K4C \
-) { \
- { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
- { KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
- { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
- { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
- { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
- { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
- { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_NO, KB_##K35, KB_##K36, KB_##K37 }, \
- { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \
- { KB_NO, KB_##K41, KB_NO, KB_##K43, KB_NO, KB_##K45, KB_NO, KB_##K47 }, \
- { KB_NO, KB_NO, KB_NO, KB_##K4B, KB_##K4C, KB_NO, KB_##K4E, KB_NO }, \
- { KB_NO, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
- { KB_##K58, KB_##K59, KB_NO, KB_##K5B, KB_##K5C, KB_NO, KB_NO, KB_NO }, \
- { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_NO, KB_##K67 }, \
- { KB_NO, KB_##K69, KB_NO, KB_##K6B, KB_NO, KB_##K6D, KB_NO, KB_##K6F }, \
- { KB_NO, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
- { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_NO, KB_NO, KB_NO, KB_##K7F } \
-}
-/* plain keymap
- {
- { KB_A, KB_S, KB_D, KB_F, KB_H, KB_G, KB_Z, KB_X }, // 00-07
- { KB_C, KB_V, KB_NO, KB_B, KB_Q, KB_W, KB_E, KB_R }, // 08-0F
- { KB_Y, KB_T, KB_1, KB_2, KB_3, KB_4, KB_6, KB_5 }, // 10-17
- { KB_EQL, KB_9, KB_7, KB_MINS,KB_8, KB_0, KB_RBRC,KB_O }, // 18-1F
- { KB_U, KB_LBRC,KB_I, KB_P, KB_ENT, KB_L, KB_J, KB_QUOT}, // 20-27
- { KB_K, KB_SCLN,KB_BSLS,KB_COMM,KB_SLSH,KB_N, KB_M, KB_DOT }, // 28-2F
- { KB_TAB, KB_SPC, KB_GRV, KB_BSPC,KB_NO, KB_ESC, KB_LCTL,KB_LGUI}, // 30-37
- { KB_LSFT,KB_CAPS,KB_LALT,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP, KB_NO }, // 38-3F
- { KB_NO, KB_PDOT,KB_NO, KB_PAST,KB_NO, KB_PPLS,KB_NO, KB_NLCK}, // 40-47
- { KB_NO, KB_NO, KB_NO, KB_PSLS,KB_PENT,KB_NO, KB_PMNS,KB_NO }, // 48-4F
- { KB_NO, KB_PEQL,KB_P0, KB_P1, KB_P2, KB_P3, KB_P4, KB_P5 }, // 50-57
- { KB_P6, KB_P7, KB_NO, KB_P8, KB_P9, KB_NO, KB_NO, KB_NO }, // 58-5F
- { KB_F5, KB_F6, KB_F7, KB_F3, KB_F8, KB_F9, KB_NO, KB_F11 }, // 60-67
- { KB_NO, KB_PSCR,KB_NO, KB_SLCK,KB_NO, KB_F10, KB_NO, KB_F12 }, // 68-6F
- { KB_NO, KB_BRK, KB_INS, KB_HOME,KB_PGUP,KB_DEL, KB_F4, KB_END }, // 70-77
- { KB_F2, KB_PGDN,KB_F1, KB_RSFT,KB_NO, KB_NO, KB_NO, KB_PWR }, // 78-7F
- },
-*/
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
- 0, // Fn0
- 0, // Fn1
- 0, // Fn2
- 0, // Fn3
- 0, // Fn4
- 0, // Fn5
- 0, // Fn6
- 0 // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
- KB_NO, // Fn0
- KB_NO, // Fn1
- KB_NO, // Fn2
- KB_NO, // Fn3
- KB_NO, // Fn4
- KB_NO, // Fn5
- KB_NO, // Fn6
- KB_NO // Fn7
-};
-
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Default Layer: plain keymap
- * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,---.
- * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|
- * `---' `---------------' `---------------' `---------------' `-----------' `---'
- * ,-----------------------------------------------------------. ,-----------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| =| /| *|
- * |-----------------------------------------------------------| |-----------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| -|
- * |-----------------------------------------------------------| `-----------' |---------------|
- * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| +|
- * |-----------------------------------------------------------| ,---. |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
- * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
- * |Ctrl |Gui |Alt | Space | | | | |Lef|Dow|Rig| | 0| .| |
- * `-----------------------------------------------------------' `-----------' `---------------'
- */
- KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR,
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,EQL, PSLS,PAST,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PMNS,
- CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
- LCTL,LGUI,LALT, SPC, LEFT,DOWN,RGHT, P0, PDOT,PENT
- ),
-};
-
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
- return KEYCODE(layer, row, col);
-}
-
-uint8_t keymap_fn_layer(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_layer[biton(fn_bits)]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t fn_bits)
-{
- return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
-}
-
-// define a condition to enter special function mode
-bool keymap_is_special_mode(uint8_t fn_bits)
-{
- //return (usb_keyboard_mods == (BIT_LCTRL | BIT_LSHIFT | BIT_LALT | BIT_LGUI));
- return (usb_keyboard_mods == (BIT_RSHIFT));
-}
diff --git a/adb/matrix.c b/adb/matrix.c
deleted file mode 100644
index 550506ec4d..0000000000
--- a/adb/matrix.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "util.h"
-#include "debug.h"
-#include "adb.h"
-#include "usb_keyboard.h"
-#include "matrix_skel.h"
-
-
-#if (MATRIX_COLS > 16)
-# error "MATRIX_COLS must not exceed 16"
-#endif
-#if (MATRIX_ROWS > 255)
-# error "MATRIX_ROWS must not exceed 255"
-#endif
-
-
-static bool _matrix_is_modified = false;
-
-// matrix state buffer(1:on, 0:off)
-#if (MATRIX_COLS <= 8)
-static uint8_t *matrix;
-static uint8_t _matrix0[MATRIX_ROWS];
-#else
-static uint16_t *matrix;
-static uint16_t _matrix0[MATRIX_ROWS];
-#endif
-
-#ifdef MATRIX_HAS_GHOST
-static bool matrix_has_ghost_in_row(uint8_t row);
-#endif
-static void _register_key(uint8_t key);
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- adb_host_init();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
- matrix = _matrix0;
-
- print_enable = true;
- debug_enable = true;
- debug_matrix = true;
- debug_keyboard = true;
- debug_mouse = true;
- print("debug enabled.\n");
- return;
-}
-
-uint8_t matrix_scan(void)
-{
- uint16_t codes;
- uint8_t key0, key1;
-
- static uint8_t prev_led = 0;
- if (prev_led != usb_keyboard_leds) {
- adb_host_kbd_led(~usb_keyboard_leds);
- prev_led = usb_keyboard_leds;
- }
-
- _matrix_is_modified = false;
- codes = adb_host_kbd_recv();
- key0 = codes>>8;
- key1 = codes&0xFF;
-
- if (codes == 0) { // no keys
- return 0;
- } else if (key0 == 0xFF && key1 != 0xFF) { // error
- return codes&0xFF;
- } else {
- _matrix_is_modified = true;
- _register_key(key0);
- if (key1 != 0xFF) // key1 is 0xFF when no second key.
- _register_key(key1);
- }
-
- if (debug_matrix && matrix_is_modified()) {
- print("adb_host_kbd_recv: "); phex16(codes); print("\n");
- }
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- return _matrix_is_modified;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
-#ifdef MATRIX_HAS_GHOST
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix_has_ghost_in_row(i))
- return true;
- }
-#endif
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-#if (MATRIX_COLS <= 8)
-uint8_t matrix_get_row(uint8_t row)
-#else
-uint16_t matrix_get_row(uint8_t row)
-#endif
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
-#if (MATRIX_COLS <= 8)
- print("\nr/c 01234567\n");
-#else
- print("\nr/c 0123456789ABCDEF\n");
-#endif
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- phex(row); print(": ");
-#if (MATRIX_COLS <= 8)
- pbin_reverse(matrix_get_row(row));
-#else
- pbin_reverse16(matrix_get_row(row));
-#endif
-#ifdef MATRIX_HAS_GHOST
- if (matrix_has_ghost_in_row(row)) {
- print(" <ghost");
- }
-#endif
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-#if (MATRIX_COLS <= 8)
- count += bitpop(matrix[i]);
-#else
- count += bitpop16(matrix[i]);
-#endif
- }
- return count;
-}
-
-#ifdef MATRIX_HAS_GHOST
-inline
-static bool matrix_has_ghost_in_row(uint8_t row)
-{
- // no ghost exists in case less than 2 keys on
- if (((matrix[row] - 1) & matrix[row]) == 0)
- return false;
-
- // ghost exists in case same state as other row
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- if (i != row && (matrix[i] & matrix[row]) == matrix[row])
- return true;
- }
- return false;
-}
-#endif
-
-inline
-static void _register_key(uint8_t key)
-{
- uint8_t col, row;
- col = key&0x07;
- row = (key>>3)&0x0F;
- if (key&0x80) {
- matrix[row] &= ~(1<<col);
- } else {
- matrix[row] |= (1<<col);
- }
-}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 02:00:11 +0000