summaryrefslogtreecommitdiff
path: root/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'README.md')
-rw-r--r--README.md264
1 files changed, 181 insertions, 83 deletions
diff --git a/README.md b/README.md
index 6b6714a6a2..4f850619e3 100644
--- a/README.md
+++ b/README.md
@@ -1,8 +1,19 @@
-TMK Keyboard Firmware Core Library
-==================================
-This is a keyboard firmware library with some useful features for Atmel AVR and Cortex-M.
+TMK Keyboard Firmware Collection
+================================
+This is a keyboard firmware with some useful features for Atmel AVR controller.
+
+Source code is available here: <http://github.com/tmk/tmk_keyboard>
+
+
+Updates
+-------
+#### 2015/04/22
+Core library was separated to other branch `core`. <https://github.com/tmk/tmk_keyboard/tree/core>
+
+In `Makefile` you need to set `TMK_DIR` to indicate core library location now.
+
+ TMK_DIR = ../../tmk_core
-Source code is available here: <https://github.com/tmk/tmk_keyboard/tree/core>
Features
@@ -27,24 +38,77 @@ These features can be used in your keyboard.
-Updates
--------
-2015/04/22 separated with TMK Keyboard Firmware Collection
-
-
-
-TMK Keyboard Firmware Collection
---------------------------------
-Complete firmwares for various keyboards and protocol converters.
-
-<https://github.com/tmk/tmk_keyboard>
+Projects
+--------
+You can find some keyboard specific projects under `converter` and `keyboard` directory.
+
+### converter
+* [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2]
+* [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb]
+* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
+* [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
+* [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news]
+* [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k]
+* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?)
+* [pc98_usb](converter/pc98_usb/) - [PC98] to USB
+* [usb_usb](converter/usb_usb/) - USB to USB(experimental)
+* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB
+* [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704]
+
+### keyboard
+* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
+* [gh60](keyboard/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
+* [hbkb](keyboard/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
+* [hid_liber](keyboard/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs)
+* [phantom](keyboard/phantom/) - [Phantom] keyboard (by Tranquilite)
+* [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung)
+* [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired]
+* [KMAC](keyboard/kmac/) - Korean custom keyboard
+* [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard
+* [Infinity](keyboard/infinity/) - Massdrop [Infinity keyboard][Infinity]
+* [NerD](keyboard/nerd/) - Korean custom keyboard
+* [KittenPaw](keyboard/kitten_paw) - Custom Majestouch controller
+* [Lightpad](keyboard/lightpad) - Korean custom keypad
+* [ghost_squid](keyboard/ghost_squid/) - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
+
+### Extenal projects using tmk_keyboard
+* [ErgoDox_cub-uanic][cub-uanic] - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
+* [mcdox][mcdox_tmk] - [mcdox][mcdox]
+
+
+[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930
+[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047
+[GH_ps2]: http://geekhack.org/showwiki.php?title=Island:14618
+[GH_adb]: http://geekhack.org/showwiki.php?title=Island:14290
+[GH_hhkb_bt]: http://geekhack.org/showwiki.php?title=Island:20851
+[GH_m0110]: http://geekhack.org/showwiki.php?title=Island:24965
+[GH_news]: http://geekhack.org/showwiki.php?title=Island:25759
+[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272
+[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060
+[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483
+[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0
+[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
+[Phantom]: http://geekhack.org/index.php?topic=26742
+[GH60]: http://geekhack.org/index.php?topic=34959
+[GH60_proto]: http://geekhack.org/index.php?topic=37570.0
+[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801
+[Sun]: http://en.wikipedia.org/wiki/Sun-3
+[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS
+[Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit
+[ghost_squid]: http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
+[cmxt]: http://gaming.coolermaster.com/en/products/keyboards/quickfirext/
+[ergodox_org]: http://ergodox.org/
+[cub-uanic]: https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
+[mcdox]: https://github.com/DavidMcEwan/mcdox
+[mcdox_tmk]: https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
License
-------
**GPLv2** or later. Some protocol files are under **Modified BSD License**.
-LUFA, PJRC and V-USB stack have their own license respectively.
+
+Third party libraries like LUFA, PJRC and V-USB have their own license respectively.
@@ -54,39 +118,100 @@ See [doc/build.md](doc/build.md).
+Change your keymap
+------------------
+See [doc/keymap.md](doc/keymap.md).
+
+
+
+Magic Commands
+--------------
+To see help press `Magic` + `H`.
+
+`Magic` key combination is `LShift` + `RShift` in many project, but `Power` key on ADB converter.
+`Magic` keybind can be vary on each project, check `config.h` in project directory.
+
+Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
+
+ ----- Command Help -----
+ c: enter console mode
+ d: toggle debug enable
+ x: toggle matrix debug
+ k: toggle keyboard debug
+ m: toggle mouse debug
+ v: print device version & info
+ t: print timer count
+ s: print status
+ e: print eeprom config
+ n: toggle NKRO
+ 0/F10: switch to Layer0
+ 1/F1: switch to Layer1
+ 2/F2: switch to Layer2
+ 3/F3: switch to Layer3
+ 4/F4: switch to Layer4
+ PScr: power down/remote wake-up
+ Caps: Lock Keyboard(Child Proof)
+ Paus: jump to bootloader
+
+
+
+Boot Magic Configuration - Virtual DIP Switch
+---------------------------------------------
+Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
+Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
+
+To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](tmk_core/common/bootmagic.h).
+
+#### General
+- Skip reading EEPROM to start with default configuration(`ESC`)
+- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
+
+#### Bootloader
+- Kick up Bootloader(`B`)
+
+#### Debug
+- Debug enable(`D`)
+- Debug matrix enable(`D`+`X`)
+- Debug keyboard enable(`D`+`K`)
+- Debug mouse enable(`D`+`M`)
+
+#### Keymap
+- Swap Control and CapsLock(`Left Control`)
+- Change CapsLock to Control(`Caps Lock`)
+- Swap LeftAlt and Gui(`Left Alt`)
+- Swap RightAlt and Gui(`Right Alt`)
+- Disable Gui(`Left Gui`)
+- Swap Grave and Escape(`Grave`)
+- Swap BackSlash and BackSpace(`Back Slash`)
+- Enable NKRO on boot(`N`)
+
+#### Default Layer
+- Set Default Layer to 0(`0`)
+- Set Default Layer to 1(`1`)
+- Set Default Layer to 2(`2`)
+- Set Default Layer to 3(`3`)
+- Set Default Layer to 4(`4`)
+- Set Default Layer to 5(`5`)
+- Set Default Layer to 6(`6`)
+- Set Default Layer to 7(`7`)
+
+
+
+Mechanical Locking support
+--------------------------
+This feature makes it possible for you to use mechanical locking switch for `CapsLock`, `NumLock`
+or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LN
+UM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Res
+ync option tries to keep switch state consistent with keyboard LED state.
+
+ #define LOCKING_SUPPORT_ENABLE
+ #define LOCKING_RESYNC_ENABLE
+
+
+
Start Your Own Project
-----------------------
**TBD**
-### Config.h Options
-#### 1. USB vendor/product ID and device description
- #define VENDOR_ID 0xFEED
- #define PRODUCT_ID 0xBEEF
- #define MANUFACTURER t.m.k.
- #define PRODUCT Macway mod
- #define DESCRIPTION t.m.k. keyboard firmware for Macway mod
-
-#### 2. Keyboard matrix configuration
- #define MATRIX_ROWS 8
- #define MATRIX_COLS 8
- #define MATRIX_HAS_GHOST
-
-
-
-Architecture
-------------
- Architecture Diagram
- +---------------+---------------+-------------+
- | Host | Keyboard | Matrix, LED |
- ___________ |-----------+-+ +-------------+ | +-----------|
- / /| Keys/Mouse | Protocol |d| | Action | | | Protocol |
- /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix |
- |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________
- || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /|
- || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
- ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / /
- `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ /
- |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/
- +---------------------------------------------+ Keyboard
@@ -94,53 +219,26 @@ Debugging
--------
Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
-You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`.
+You can use xprintf() to display debug info on `hid_listen`, see `tmk_core/common/xprintf.h`.
Files and Directories
-------------------
### Top
-* common/ - common codes
-* protocol/ - keyboard protocol support
+* tmk_core/ - core library
+* keyboard/ - keyboard projects
+* converter/ - protocol converter projects
* doc/ - documents
-* common.mk - Makefile for common
-* protocol.mk - Makefile for protocol
-* rules.mk - Makefile for build rules
-
-### Common
-* host.h
-* host_driver.h
-* keyboard.h
-* command.h
-* keymap.h
-* action.h
-* keycode.h
-* matrix.h
-* led.h
-* mousekey.h
-* report.h
-* debug.h
-* print.h
-* bootloader.h
-* sendchar.h
-* timer.h
-* util.h
-
-### Keyboard Protocols
-* lufa/ - LUFA USB stack
-* pjrc/ - PJRC USB stack
-* vusb/ - Objective Development V-USB
-* iwrap/ - Bluetooth HID for Bluegiga iWRAP
-* ps2.c - PS/2 protocol
-* adb.c - Apple Desktop Bus protocol
-* m0110.c - Macintosh 128K/512K/Plus keyboard protocol
-* news.c - Sony NEWS keyboard protocol
-* x68k.c - Sharp X68000 keyboard protocol
-* serial_soft.c - Asynchronous Serial protocol implemented by software
Coding Style
-------------
- Doesn't use Tab to indent, use 4-spaces instead.
+
+
+
+Other Keyboard Firmware Projects
+------------------
+You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](doc/other_projects.md).