diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/README.md b/README.md new file mode 100644 index 0000000000..dd03e1403d --- /dev/null +++ b/README.md @@ -0,0 +1,296 @@ +TMK Keyboard Firmware Collection +================================ +This is a keyboard firmware with some useful features for Atmel AVR controller. + +Source code is available here: <http://github.com/tmk/tmk_keyboard> + + +Features +-------- +These features can be used in your keyboard. + +* Multi-layer Keymap - Multiple keyboard layouts with layer switching +* Mouse key - Mouse control with keyboard +* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up +* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc +* USB NKRO - 120 keys(+ 8 modifiers) simultaneously +* PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device +* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols +* User Function - Customizable function of key with writing code +* Macro - Very primitive at this time +* Keyboard Tricks - Oneshot modifier and modifier with tapping feature +* Debug Console - Messages for debug and interaction with firmware +* Virtual DIP Switch - Configurations stored EEPROM(Boot Magic) +* Locking CapsLock - Mechanical switch support for CapsLock +* Breathing Sleep LED - Sleep indicator with charm during USB suspend +* Backlight - Control backlight levels + + +Projects +-------- +You can find some keyboard specific projects under `converter` and `keyboard` directory. + +### converter +* [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2] +* [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb] +* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110] +* [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal] +* [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news] +* [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k] +* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?) +* [pc98_usb](converter/pc98_usb/) - [PC98] to USB +* [usb_usb](converter/usb_usb/) - USB to USB(experimental) +* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB +* [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704] + +### keyboard +* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board** +* [gh60](keyboard/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board** +* [hbkb](keyboard/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod) +* [hid_liber](keyboard/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs) +* [phantom](keyboard/phantom/) - [Phantom] keyboard (by Tranquilite) +* [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung) +* [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired] +* [KMAC](keyboard/kmac/) - Korean custom keyboard +* [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard +* [Infinity](keyboard/infinity/) - Massdrop [Infinity keyboard][Infinity] +* [NerD](keyboard/nerd/) - Korean custom keyboard +* [KittenPaw](keyboard/kitten_paw) - Custom Majestouch controller +* [Lightpad](keyboard/lightpad) - Korean custom keypad +* [ghost_squid](keyboard/ghost_squid/) - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt] + +### Extenal projects using tmk_keyboard +* [ErgoDox_cub-uanic][cub-uanic] - Split Ergonomic Keyboard [ErgoDox][ergodox_org] +* [mcdox][mcdox_tmk] - [mcdox][mcdox] + + +[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930 +[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047 +[GH_ps2]: http://geekhack.org/showwiki.php?title=Island:14618 +[GH_adb]: http://geekhack.org/showwiki.php?title=Island:14290 +[GH_hhkb_bt]: http://geekhack.org/showwiki.php?title=Island:20851 +[GH_m0110]: http://geekhack.org/showwiki.php?title=Island:24965 +[GH_news]: http://geekhack.org/showwiki.php?title=Island:25759 +[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272 +[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060 +[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483 +[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0 +[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions +[Phantom]: http://geekhack.org/index.php?topic=26742 +[GH60]: http://geekhack.org/index.php?topic=34959 +[GH60_proto]: http://geekhack.org/index.php?topic=37570.0 +[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801 +[Sun]: http://en.wikipedia.org/wiki/Sun-3 +[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS +[Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit +[ghost_squid]: http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid +[cmxt]: http://gaming.coolermaster.com/en/products/keyboards/quickfirext/ +[ergodox_org]: http://ergodox.org/ +[cub-uanic]: https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox +[mcdox]: https://github.com/DavidMcEwan/mcdox +[mcdox_tmk]: https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox + + + +License +------- +**GPLv2** or later. Some protocol files are under **Modified BSD License**. +LUFA, PJRC and V-USB stack have their own license respectively. + + + +Build Firmware and Program Controller +------------------------------------- +See [doc/build.md](doc/build.md). + + + +Change your keymap +------------------ +See [doc/keymap.md](doc/keymap.md). + + + +Magic Commands +-------------- +To see help press `Magic` + `H`. + + `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory. + +Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed. + + ----- Command Help ----- + c: enter console mode + d: toggle debug enable + x: toggle matrix debug + k: toggle keyboard debug + m: toggle mouse debug + v: print device version & info + t: print timer count + s: print status + e: print eeprom config + n: toggle NKRO + 0/F10: switch to Layer0 + 1/F1: switch to Layer1 + 2/F2: switch to Layer2 + 3/F3: switch to Layer3 + 4/F4: switch to Layer4 + PScr: power down/remote wake-up + Caps: Lock Keyboard(Child Proof) + Paus: jump to bootloader + +**TBD** + +### Boot Magic Configuration - Virtual DIP Switch +Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable. +Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles. + +To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h). + +#### General +- Skip reading EEPROM to start with default configuration(`ESC`) +- Clear configuration stored in EEPROM to reset configuration(`Backspace`) + +#### Bootloader +- Kick up Bootloader(`B`) + +#### Debug +- Debug enable(`D`) +- Debug matrix enable(`D`+`X`) +- Debug keyboard enable(`D`+`K`) +- Debug mouse enable(`D`+`M`) + +#### Keymap +- Swap Control and CapsLock(`Left Control`) +- Change CapsLock to Control(`Caps Lock`) +- Swap LeftAlt and Gui(`Left Alt`) +- Swap RightAlt and Gui(`Right Alt`) +- Disable Gui(`Left Gui`) +- Swap Grave and Escape(`Grave`) +- Swap BackSlash and BackSpace(`Back Slash`) +- Enable NKRO on boot(`N`) + +#### Default Layer +- Set Default Layer to 0(`0`) +- Set Default Layer to 1(`1`) +- Set Default Layer to 2(`2`) +- Set Default Layer to 3(`3`) +- Set Default Layer to 4(`4`) +- Set Default Layer to 5(`5`) +- Set Default Layer to 6(`6`) +- Set Default Layer to 7(`7`) + +#### Caution +Unintentional use of this feature will cause user confusion. + +TODO: Magic key combination to avoid unintentional press during plug in + +**TBD** + + +Mechanical Locking support +-------------------------- +This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state. + + #define LOCKING_SUPPORT_ENABLE + #define LOCKING_RESYNC_ENABLE + + +Start Your Own Project +----------------------- +**TBD** +### Config.h Options +#### 1. USB vendor/product ID and device description + #define VENDOR_ID 0xFEED + #define PRODUCT_ID 0xBEEF + #define MANUFACTURER t.m.k. + #define PRODUCT Macway mod + #define DESCRIPTION t.m.k. keyboard firmware for Macway mod + +#### 2. Keyboard matrix configuration + #define MATRIX_ROWS 8 + #define MATRIX_COLS 8 + #define MATRIX_HAS_GHOST + + + +Architecture +------------ + Architecture Diagram + +---------------+---------------+-------------+ + | Host | Keyboard | Matrix, LED | + ___________ |-----------+-+ +-------------+ | +-----------| + / /| Keys/Mouse | Protocol |d| | Action | | | Protocol | + /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix | + |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________ + || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /| + || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / / + ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / / + `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ / + |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/ + +---------------------------------------------+ Keyboard + + + +Debugging +-------- +Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack. + +You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`. + + + +Files and Directories +------------------- +### Top +* common/ - common codes +* protocol/ - keyboard protocol support +* keyboard/ - keyboard projects +* converter/ - protocol converter projects +* doc/ - documents +* common.mk - Makefile for common +* protocol.mk - Makefile for protocol +* rules.mk - Makefile for build rules + +### Common +* host.h +* host_driver.h +* keyboard.h +* command.h +* keymap.h +* action.h +* keycode.h +* matrix.h +* led.h +* mousekey.h +* report.h +* debug.h +* print.h +* bootloader.h +* sendchar.h +* timer.h +* util.h + +### Keyboard Protocols +* lufa/ - LUFA USB stack +* pjrc/ - PJRC USB stack +* vusb/ - Objective Development V-USB +* iwrap/ - Bluetooth HID for Bluegiga iWRAP +* ps2.c - PS/2 protocol +* adb.c - Apple Desktop Bus protocol +* m0110.c - Macintosh 128K/512K/Plus keyboard protocol +* news.c - Sony NEWS keyboard protocol +* x68k.c - Sharp X68000 keyboard protocol +* serial_soft.c - Asynchronous Serial protocol implemented by software + + + +Coding Style +------------- +- Doesn't use Tab to indent, use 4-spaces instead. + + + +Other Keyboard Firmware Projects +------------------ +You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](doc/other_projects.md). |