diff options
37 files changed, 662 insertions, 987 deletions
diff --git a/keyboards/zen/common/glcdfont.c b/keyboards/zen/common/glcdfont.c new file mode 100644 index 0000000000..3b4ccfa95c --- /dev/null +++ b/keyboards/zen/common/glcdfont.c @@ -0,0 +1,239 @@ +// This is the SOL 6x8 font + +#pragma once + +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/pgmspace.h> +#elif defined(ESP8266) + #include <pgmspace.h> +#else + #define PROGMEM +#endif + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x0C, 0x90, + 0xB0, 0xE0, 0x72, 0x31, 0x9B, 0xDE, + 0xCE, 0xEC, 0xEE, 0xE9, 0xE9, 0xEC, + 0xCF, 0xDA, 0x99, 0x3E, 0x62, 0xE4, + 0xC4, 0x70, 0x10, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0xC0, 0xC0, 0x80, 0x80, 0x02, 0x85, + 0x85, 0x87, 0x85, 0x89, 0x89, 0x92, + 0xEA, 0xC6, 0xC4, 0x48, 0x50, 0x60, + 0x40, 0x40, 0x40, 0x40, 0xC0, 0xE0, + 0x50, 0x28, 0x10, 0x10, 0x60, 0xC0, + 0x40, 0x40, 0x40, 0x40, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xE0, 0xF8, 0xFC, + 0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0xE0, 0xEC, 0xDF, + 0xFC, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x70, 0x0F, 0x00, 0x00, 0x80, + 0x7F, 0x00, 0x00, 0x7F, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x7F, + 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x21, 0x33, 0x3B, 0x7B, + 0xFF, 0x00, 0x7C, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x7C, 0x01, + 0xFF, 0xDE, 0x8C, 0x04, 0x0C, 0x08, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x01, 0x01, 0x7F, 0x80, + 0x80, 0xBE, 0xBE, 0x80, 0x80, 0x80, + 0xC1, 0xFF, 0x80, 0x04, 0x32, 0x5E, + 0x1C, 0x3D, 0x26, 0x10, 0xC1, 0xFF, + 0x3E, 0x00, 0x00, 0x08, 0x36, 0xC1, + 0x08, 0x08, 0x14, 0x77, 0x94, 0x94, + 0x94, 0xF7, 0x94, 0xF7, 0x9C, 0x9C, + 0xFF, 0xFF, 0x1E, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x40, 0x7C, 0x3F, 0x3F, 0x23, 0x01, + 0x23, 0x3F, 0x37, 0x6C, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x06, 0x02, 0x06, + 0x4D, 0x4F, 0x8C, 0xF9, 0x73, 0x37, + 0x27, 0x2F, 0x2F, 0xAF, 0xEF, 0x6F, + 0x77, 0x17, 0x33, 0x79, 0xCC, 0x1F, + 0x31, 0x20, 0x21, 0x02, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x40, 0xE0, + 0xA0, 0xA0, 0xD0, 0x90, 0x48, 0x48, + 0x25, 0x2B, 0x11, 0x09, 0x05, 0x03, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x03, 0x02, 0x04, 0x03, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, + 0x0F, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/zen/config.h b/keyboards/zen/config.h index 4478062eb0..6868dc1354 100644 --- a/keyboards/zen/config.h +++ b/keyboards/zen/config.h @@ -15,17 +15,6 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" - -#endif // CONFIG_H - -#undef RGBLED_NUM -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 - -#ifndef TAPPING_TERM -#define TAPPING_TERM 100 -#endif diff --git a/keyboards/zen/keymaps/default/rules.mk b/keyboards/zen/keymaps/default/rules.mk deleted file mode 100644 index 73142a1680..0000000000 --- a/keyboards/zen/keymaps/default/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes - diff --git a/keyboards/zen/keymaps/jwlawrence/rules.mk b/keyboards/zen/keymaps/jwlawrence/rules.mk deleted file mode 100644 index 73142a1680..0000000000 --- a/keyboards/zen/keymaps/jwlawrence/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes - diff --git a/keyboards/zen/keymaps/xyverz/rules.mk b/keyboards/zen/keymaps/xyverz/rules.mk deleted file mode 100644 index 73142a1680..0000000000 --- a/keyboards/zen/keymaps/xyverz/rules.mk +++ /dev/null @@ -1,3 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes - diff --git a/keyboards/zen/matrix.c b/keyboards/zen/matrix.c deleted file mode 100644 index 34655237b5..0000000000 --- a/keyboards/zen/matrix.c +++ /dev/null @@ -1,466 +0,0 @@ -/* -Copyright 2017 Danny Nguyen <danny@keeb.io> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" -#include "timer.h" -#include "backlight.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCING_DELAY -# define DEBOUNCING_DELAY 5 -#endif - -#if (DEBOUNCING_DELAY > 0) - static uint16_t debouncing_time; - static bool debouncing = false; -#endif - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#else -# error "Currently only supports 8 COLS" -#endif -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#define ERROR_DISCONNECT_COUNT 5 - -#define SERIAL_LED_ADDR 0x00 - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -#if (DIODE_DIRECTION == COL2ROW) - static void init_cols(void); - static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); - static void unselect_rows(void); - static void select_row(uint8_t row); - static void unselect_row(uint8_t row); -#elif (DIODE_DIRECTION == ROW2COL) - static void init_rows(void); - static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); - static void unselect_cols(void); - static void unselect_col(uint8_t col); - static void select_col(uint8_t col); -#endif - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); -#if (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); - - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } - -# else - read_cols_on_row(matrix+offset, current_row); -# endif - - } - -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { -# if (DEBOUNCING_DELAY > 0) - bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); - if (matrix_changed) { - debouncing = true; - debouncing_time = timer_read(); - } -# else - read_rows_on_col(matrix+offset, current_col); -# endif - - } -#endif - -# if (DEBOUNCING_DELAY > 0) - if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - debouncing = false; - } -# endif - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - -#ifdef BACKLIGHT_ENABLE - // Write backlight level for slave to read - serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level(); -#endif - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - uint8_t ret = _matrix_scan(); - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } - -#ifdef BACKLIGHT_ENABLE - // Read backlight level sent from master and update level on slave - backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); -#endif -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -#if (DIODE_DIRECTION == COL2ROW) - -static void init_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) -{ - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - - // Select the col pin to read (active low) - uint8_t pin = col_pins[col_index]; - uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); - - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -static void select_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_row(uint8_t row) -{ - uint8_t pin = row_pins[row]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void init_rows(void) -{ - for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { - uint8_t pin = row_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) -{ - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) - { - - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) - { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - else - { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) - { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -static void select_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT - _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW -} - -static void unselect_col(uint8_t col) -{ - uint8_t pin = col_pins[col]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI -} - -static void unselect_cols(void) -{ - for(uint8_t x = 0; x < MATRIX_COLS; x++) { - uint8_t pin = col_pins[x]; - _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN - _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI - } -} - -#endif diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md index 0fb0ffb3b6..7ca7c69fe5 100644 --- a/keyboards/zen/readme.md +++ b/keyboards/zen/readme.md @@ -2,19 +2,26 @@ A split ergo keyboard with a few goals in mind: -- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick. +- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick *including switches and caps* when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps. - Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing. -- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder. +- Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright - Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume. +- Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the [QMK Proton-C](https://olkb.com/parts/qmk-proton-c) and the [Keeb.io Elite-C](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4) -Keyboard Maintainer: [Legonut](https://github.com/Legonut) -Hardware Supported: Zen rev1 +Keyboard Maintainer: [Legonut](https://github.com/Legonut) +Hardware Supported: Zen rev1, Zen rev2 Hardware Availability: [RGBKB.net](https://www.rgbkb.net/) -A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://legonut.gitbooks.io/zen-keyboard/content/). +A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://rgbkb.gitbook.io/sol-build-guide/zygomorph-build-guide/untitled). Make example for this keyboard (after setting up your build environment): - make zen/rev1:default + make zen/rev2:default + +To build for a Proton-C: + + make zen/rev2:default CTPC=yes + +**Note:** The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes. See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/zen/rev1/config.h b/keyboards/zen/rev1/config.h index f480cadcc5..88f39af484 100644 --- a/keyboards/zen/rev1/config.h +++ b/keyboards/zen/rev1/config.h @@ -15,15 +15,12 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -#include QMK_KEYBOARD_CONFIG_H +#pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xCEEB -#define PRODUCT_ID 0x1256 -#define DEVICE_VER 0x0200 +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 #define MANUFACTURER Legonut #define PRODUCT Project Zen #define DESCRIPTION Split gaming keyboard @@ -40,12 +37,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define SOFT_SERIAL_PIN D0 + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ -// #define BACKLIGHT_LEVELS 3 - /* Set 0 if debouncing isn't needed */ #define DEBOUNCING_DELAY 5 @@ -54,9 +50,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#define BACKLIGHT_PIN F4 -#define BACKLIGHT_LEVELS 5 - /* ws2812 RGB LED */ #define RGB_DI_PIN D1 @@ -79,5 +72,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#endif diff --git a/keyboards/zen/keymaps/333fred/config.h b/keyboards/zen/rev1/keymaps/333fred/config.h index 1634f368cc..1634f368cc 100644 --- a/keyboards/zen/keymaps/333fred/config.h +++ b/keyboards/zen/rev1/keymaps/333fred/config.h diff --git a/keyboards/zen/keymaps/333fred/keymap.c b/keyboards/zen/rev1/keymaps/333fred/keymap.c index 3dd7698039..3dd7698039 100644 --- a/keyboards/zen/keymaps/333fred/keymap.c +++ b/keyboards/zen/rev1/keymaps/333fred/keymap.c diff --git a/keyboards/zen/keymaps/333fred/rules.mk b/keyboards/zen/rev1/keymaps/333fred/rules.mk index 38b7155504..1359e81c09 100644 --- a/keyboards/zen/keymaps/333fred/rules.mk +++ b/keyboards/zen/rev1/keymaps/333fred/rules.mk @@ -1,5 +1,4 @@ RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = no NKRO_ENABLE = yes KEY_LOCK_ENABLE = yes TAP_DANCE_ENABLE = yes diff --git a/keyboards/zen/keymaps/jwlawrence/config.h b/keyboards/zen/rev1/keymaps/default/config.h index 38e4d73f0d..4a549c5b1f 100644 --- a/keyboards/zen/keymaps/jwlawrence/config.h +++ b/keyboards/zen/rev1/keymaps/default/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once #include "config_common.h" @@ -37,5 +36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/zen/keymaps/default/keymap.c b/keyboards/zen/rev1/keymaps/default/keymap.c index b2adffd1e7..b2adffd1e7 100644 --- a/keyboards/zen/keymaps/default/keymap.c +++ b/keyboards/zen/rev1/keymaps/default/keymap.c diff --git a/keyboards/zen/rev1/keymaps/default/rules.mk b/keyboards/zen/rev1/keymaps/default/rules.mk new file mode 100644 index 0000000000..1e3cebb145 --- /dev/null +++ b/keyboards/zen/rev1/keymaps/default/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/zen/keymaps/default/config.h b/keyboards/zen/rev1/keymaps/jwlawrence/config.h index d813085e46..d813085e46 100644 --- a/keyboards/zen/keymaps/default/config.h +++ b/keyboards/zen/rev1/keymaps/jwlawrence/config.h diff --git a/keyboards/zen/keymaps/jwlawrence/keymap.c b/keyboards/zen/rev1/keymaps/jwlawrence/keymap.c index 13edd0db8d..13edd0db8d 100644 --- a/keyboards/zen/keymaps/jwlawrence/keymap.c +++ b/keyboards/zen/rev1/keymaps/jwlawrence/keymap.c diff --git a/keyboards/zen/rev1/keymaps/jwlawrence/rules.mk b/keyboards/zen/rev1/keymaps/jwlawrence/rules.mk new file mode 100644 index 0000000000..1e3cebb145 --- /dev/null +++ b/keyboards/zen/rev1/keymaps/jwlawrence/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/zen/keymaps/kageurufu/keymap.c b/keyboards/zen/rev1/keymaps/kageurufu/keymap.c index 761100dbe5..75884635cd 100644 --- a/keyboards/zen/keymaps/kageurufu/keymap.c +++ b/keyboards/zen/rev1/keymaps/kageurufu/keymap.c @@ -1,8 +1,8 @@ #include QMK_KEYBOARD_H #include "kageurufu.h" #ifdef PROTOCOL_LUFA -#include "lufa.h" -#include "split_util.h" + #include "lufa.h" + #include "split_util.h" #endif extern keymap_config_t keymap_config; diff --git a/keyboards/zen/keymaps/xyverz/config.h b/keyboards/zen/rev1/keymaps/xyverz/config.h index 818f899897..d3e21ea172 100644 --- a/keyboards/zen/keymaps/xyverz/config.h +++ b/keyboards/zen/rev1/keymaps/xyverz/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H +#pragma once #include "config_common.h" @@ -31,5 +30,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 - -#endif diff --git a/keyboards/zen/keymaps/xyverz/keymap.c b/keyboards/zen/rev1/keymaps/xyverz/keymap.c index 6250086ed9..6250086ed9 100644 --- a/keyboards/zen/keymaps/xyverz/keymap.c +++ b/keyboards/zen/rev1/keymaps/xyverz/keymap.c diff --git a/keyboards/zen/rev1/keymaps/xyverz/rules.mk b/keyboards/zen/rev1/keymaps/xyverz/rules.mk new file mode 100644 index 0000000000..1e3cebb145 --- /dev/null +++ b/keyboards/zen/rev1/keymaps/xyverz/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes diff --git a/keyboards/zen/rev1/rev1.h b/keyboards/zen/rev1/rev1.h index c2444f047f..a12f2ea789 100644 --- a/keyboards/zen/rev1/rev1.h +++ b/keyboards/zen/rev1/rev1.h @@ -1,5 +1,4 @@ -#ifndef REV1_H -#define REV1_H +#pragma once #include "zen.h" @@ -36,5 +35,3 @@ { k80, k81, k82, k83, k84, k85, KC_NO }, \ { k90, k91, k92, k93, k94, k95, k96 } \ } - -#endif diff --git a/keyboards/zen/rev1/rules.mk b/keyboards/zen/rev1/rules.mk index d7463419b4..e69de29bb2 100644 --- a/keyboards/zen/rev1/rules.mk +++ b/keyboards/zen/rev1/rules.mk @@ -1,2 +0,0 @@ -RGBLIGHT_ENABLE = yes -BACKLIGHT_ENABLE = yes diff --git a/keyboards/zen/rev2/config.h b/keyboards/zen/rev2/config.h new file mode 100644 index 0000000000..dc37472f6b --- /dev/null +++ b/keyboards/zen/rev2/config.h @@ -0,0 +1,98 @@ +/* +Copyright 2017 Danny Nguyen <danny@hexwire.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3061 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Legonut +#define PRODUCT "Project Zen" +#define DESCRIPTION "Split gaming keyboard" + +/* key matrix size */ +// Rows are doubled-up + +// wiring of each half +#ifdef CONVERT_TO_PROTON_C + #define MATRIX_ROWS 5 + #define MATRIX_COLS 7 +#else + #define MATRIX_ROWS 10 + #define MATRIX_COLS 7 +#endif + +// Proton-C does pin conversion +#define MATRIX_ROW_PINS { C6, E6, B5, D7, B4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B3, B1, B2 } + +#define NUMBER_OF_ENCODERS 1 + +#define ENCODERS_PAD_A { D4 } +#define ENCODERS_PAD_B { D2 } + +#define RGB_DI_PIN B6 +#define SOFT_SERIAL_PIN D3 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* ws2812 RGB LED */ +#define RGBLED_NUM 34 // Number of LEDs + +// If using 90 Degree rotation, increase block cout +#ifdef OLED_ROTATE90 + #define OLED_DISPLAY_CUSTOM + #define OLED_DISPLAY_WIDTH 128 + #define OLED_DISPLAY_HEIGHT 32 + #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed) + #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only + #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 8 (compile time mathed) + #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed) + #define OLED_SOURCE_MAP { 0, 8, 16, 24 } + #define OLED_TARGET_MAP { 24, 16, 8, 0 } +#endif + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/zen/rev2/keymaps/debug/keymap.c b/keyboards/zen/rev2/keymaps/debug/keymap.c new file mode 100644 index 0000000000..e2d3d6a356 --- /dev/null +++ b/keyboards/zen/rev2/keymaps/debug/keymap.c @@ -0,0 +1,19 @@ +#include QMK_KEYBOARD_H +#include <stdio.h> + +// extern keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { { { KC_TRNS } } }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static char buf[10] = " "; + + if (record->event.pressed) { + snprintf(buf, 10, "C%dR%d ", record->event.key.col, record->event.key.row); + + send_string(buf); + } + return false; + + return true; +} diff --git a/keyboards/zen/rev2/keymaps/default/keymap.c b/keyboards/zen/rev2/keymaps/default/keymap.c new file mode 100644 index 0000000000..41003e4a55 --- /dev/null +++ b/keyboards/zen/rev2/keymaps/default/keymap.c @@ -0,0 +1,117 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _NAV 2 + + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + NAV, + +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. .-----------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------..------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B |RGBPrv||RGBNxt| N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------||------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter |Space | NAV | - | = | PGUP | PGDN | + * `----------------------------------+-------------''------------------------------------------------' + * |Space |Delete||Enter |Space | + * '-------------''-------------' + */ + [_QWERTY] = LAYOUT( \ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \ + LT(_NAV, KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, RGB_RMOD,RGB_MOD, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, MO(_NAV), KC_SPC, KC_DEL, KC_ENT, KC_SPACE, MO(_NAV), KC_MINS, KC_EQL, KC_PGUP, KC_PGDN, \ + KC_SPC, KC_DEL, KC_ENT, KC_SPACE \ + ), + + /* NAV + * ,-----------------------------------------. .-----------------------------------------. + * | GESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |CAPS(NAV)|A | S | D | F | G | | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------..------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | || | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------||------+------+------+------+------+------+------| + * | Ctrl | GUI | Alt |RGBTOG| NAV |Space |Delete||Enter |Space | NAV | - | = | PGUP | PGDN | + * `----------------------------------+-------------''------------------------------------------------' + * |Space |Delete||Enter |Space | + * '-------------''-------------' + */ + [_NAV] = LAYOUT( \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, RGB_SAI, RGB_VAI, RGB_SAD, RESET, KC_LBRC, KC_RBRC, KC_PGUP, KC_UP, KC_PGDN, KC_INS, KC_HOME, \ + _______, RGB_HUD, RGB_VAD, RGB_HUI, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_DEL, KC_END, \ + KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, \ + KC_LCTL, KC_LGUI, KC_LALT, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, KC_VOLD, \ + _______, _______, _______, _______ + ), + +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Second encoder from slave */ + if (clockwise) { + tap_code(KC_UP); + } else { + tap_code(KC_DOWN); + } + } +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(1UL<<_QWERTY); + } + return false; + break; + //case COLEMAK: + //if (record->event.pressed) { + //set_single_persistent_default_layer(1UL<<_COLEMAK); + //} + //return false; + //break; + } + return true; +} + + +#if OLED_DRIVER_ENABLE +const char* layer_name_user(uint32_t layer) { + switch (layer) { + case _QWERTY: + return PSTR("QWRTY"); + case _NAV: + return PSTR("NAV\n"); + default: + return PSTR("UNDEF"); + } +} +#endif diff --git a/keyboards/zen/rev2/rev2.c b/keyboards/zen/rev2/rev2.c new file mode 100644 index 0000000000..4104460db1 --- /dev/null +++ b/keyboards/zen/rev2/rev2.c @@ -0,0 +1,66 @@ +#include "rev2.h" + +#ifdef OLED_DRIVER_ENABLE +#include "split_util.h" +#include "oled_driver.h" + +__attribute__((weak)) +void render_logo(void) { + static const char PROGMEM sol_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(sol_logo, false); +} + +__attribute__((weak)) +const char* layer_name_user(uint32_t layer) { + switch (layer) { + default: + return PSTR("UNDEF\n"); + } +} + +__attribute__((weak)) +void render_status(void) { + // Setup for 90 degree rendering because it's awesome! + // It can house 16 lines of text, with 5 letters each line + // Render to mode icon + static const char PROGMEM mode_logo[2][4] = { + {0x97,0x98,0x0a,0}, + {0xb7,0xb8,0x0a,0} }; + + oled_write_P(mode_logo[0], false); // Line 1 + oled_write_P(mode_logo[1], false); // Line 2 + + // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + oled_set_cursor(0, 3); // Line 3 + oled_write_P(PSTR("Layer"), false); // Line 4 + oled_write_P(layer_name_user(biton32(layer_state)), false); + + // Host Keyboard LED Status + uint8_t led_usb_state = host_keyboard_leds(); + oled_set_cursor(0, OLED_MAX_LINES - 4); // Line 13 + oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); // Line 14 + oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); // Line 15 + oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); // Line 16 +} + +#ifdef OLED_ROTATE90 +bool oled_init_user(bool flip180) { + return true; +} +#endif + +__attribute__((weak)) +void oled_task_user(void) { + if (is_keyboard_master()) { + render_status(); + } else { + render_logo(); + oled_scroll_left(); + } +} + +#endif diff --git a/keyboards/zen/rev2/rev2.h b/keyboards/zen/rev2/rev2.h new file mode 100644 index 0000000000..101622988d --- /dev/null +++ b/keyboards/zen/rev2/rev2.h @@ -0,0 +1,56 @@ +#pragma once + +#include "zen.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + + +#ifdef USE_I2C +#include <stddef.h> +#ifdef __AVR__ + #include <avr/io.h> + #include <avr/interrupt.h> +#endif +#endif + +//void promicro_bootloader_jmp(bool program); + +#ifdef CONVERT_TO_PROTON_C + #define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k16, k66, k85, k84, k83, k82, k81, k80, \ + k40, k41, k42, k43, k44, k36, k26, k76, k86, k94, k93, k92, k91, k90, \ + k45, k46, k96, k95 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16 }, \ + { k20, k21, k22, k23, k24, k25, k26 }, \ + { k30, k31, k32, k33, k34, k35, k36 }, \ + { k40, k41, k42, k43, k44, k45, k46 } \ + } +#else + #define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k55, k54, k53, k52, k51, k50, \ + k10, k11, k12, k13, k14, k15, k65, k64, k63, k62, k61, k60, \ + k20, k21, k22, k23, k24, k25, k75, k74, k73, k72, k71, k70, \ + k30, k31, k32, k33, k34, k35, k16, k66, k85, k84, k83, k82, k81, k80, \ + k40, k41, k42, k43, k44, k36, k26, k76, k86, k94, k93, k92, k91, k90, \ + k45, k46, k96, k95 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16 }, \ + { k20, k21, k22, k23, k24, k25, k26 }, \ + { k30, k31, k32, k33, k34, k35, k36 }, \ + { k40, k41, k42, k43, k44, k45, k46 }, \ + { k50, k51, k52, k53, k54, k55, KC_NO }, \ + { k60, k61, k62, k63, k64, k65, k66 }, \ + { k70, k71, k72, k73, k74, k75, k76 }, \ + { k80, k81, k82, k83, k84, k85, k86 }, \ + { k90, k91, k92, k93, k94, k95, k96 } \ + } +#endif diff --git a/keyboards/zen/rev2/rules.mk b/keyboards/zen/rev2/rules.mk new file mode 100644 index 0000000000..d1fe410525 --- /dev/null +++ b/keyboards/zen/rev2/rules.mk @@ -0,0 +1,14 @@ +ENCODER_ENABLE = yes + +OLED_DRIVER_ENABLE = no +OLED_ROTATE90 = yes + +# Setup so that OLED and 90 degree rotation can be turned on/off easily +# with "OLED_DRIVER_ENABLE = yes" or "OLED_ROTATE90 = no" in user's rules.mk file +ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + # Custom local font file + OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\" + ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes) + OPT_DEFS += -DOLED_ROTATE90 + endif +endif diff --git a/keyboards/zen/rules.mk b/keyboards/zen/rules.mk index 4e82689111..f5d64a7f03 100644 --- a/keyboards/zen/rules.mk +++ b/keyboards/zen/rules.mk @@ -1,51 +1,26 @@ -SRC += matrix.c \ - split_util.c \ - serial.c - -# MCU name -#MCU = at90usb1287 +# Pro Micro or Elite-C +# Automagically converted to Proton-C MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. F_USB = $(F_CPU) +BOOTLOADER = dfu +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -# Bootloader -# This definition is optional, and if your keyboard supports multiple bootloaders of -# different sizes, comment this out, and the correct address will be loaded -# automatically (+60). See bootloader.mk for all options. -BOOTLOADER = caterina +ifeq ($(strip $(CTPC)), yes) + CONVERT_TO_PROTON_C=yes +endif -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) + SPLIT_KEYBOARD = no # currently unsupported on ARM + RGBLIGHT_ENABLE = no # currently unsupported on ARM + + EXTRAFLAGS += -DUSE_PROTON_C +else + # Currently moved to Pro Micro only section because of lack of Proton-C support + SPLIT_KEYBOARD = yes + RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. +endif # Build Options # change to "no" to disable the options, or define them in the Makefile in @@ -57,17 +32,11 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = yes -USE_I2C = no -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -DEFAULT_FOLDER = zen/rev1 +DEFAULT_FOLDER = zen/rev2 diff --git a/keyboards/zen/serial.c b/keyboards/zen/serial.c deleted file mode 100644 index 74bcbb6bf6..0000000000 --- a/keyboards/zen/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/zen/serial.h b/keyboards/zen/serial.h deleted file mode 100644 index 15fe4db7b4..0000000000 --- a/keyboards/zen/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include <stdbool.h> - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/zen/split_rgb.c b/keyboards/zen/split_rgb.c deleted file mode 100644 index 6d7cb44cf0..0000000000 --- a/keyboards/zen/split_rgb.c +++ /dev/null @@ -1,41 +0,0 @@ -#include <stdint.h> -#include <stdbool.h> -#include "split_util.h" -#include "progmem.h" -#include "print.h" -#include "rgblight.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - - -rgblight_config_t rgblight_config; - -void rgblight_slave_update(void) { - //rgblight_effect_christmas(); -} - - -void rgblight_set(void) { - if (rgblight_config.enable) { - #ifdef RGBW - ws2812_setleds_rgbw(led, RGBLED_NUM); - #else - ws2812_setleds(led, RGBLED_NUM); - #endif - } else { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - #ifdef RGBW - ws2812_setleds_rgbw(led, RGBLED_NUM); - #else - ws2812_setleds(led, RGBLED_NUM); - #endif - } -} diff --git a/keyboards/zen/split_rgb.h b/keyboards/zen/split_rgb.h deleted file mode 100644 index 5f552890af..0000000000 --- a/keyboards/zen/split_rgb.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef SPLIT_RGB_H -#define SPLIT_RGB_H - -void rgblight_slave_update(void); - -#endif diff --git a/keyboards/zen/split_util.c b/keyboards/zen/split_util.c deleted file mode 100644 index 346cbc9089..0000000000 --- a/keyboards/zen/split_util.c +++ /dev/null @@ -1,86 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { - timer_init(); -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -void keyboard_slave_loop(void) { - matrix_init(); - - while (1) { - matrix_slave_scan(); - } -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); - - if (!has_usb()) { - keyboard_slave_loop(); - } -} diff --git a/keyboards/zen/split_util.h b/keyboards/zen/split_util.h deleted file mode 100644 index 595a0659e1..0000000000 --- a/keyboards/zen/split_util.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif diff --git a/keyboards/zen/zen.h b/keyboards/zen/zen.h index 56fc64fe26..cee7652d62 100644 --- a/keyboards/zen/zen.h +++ b/keyboards/zen/zen.h @@ -1,7 +1,8 @@ -#ifndef ZEN_H -#define ZEN_H - -#include "rev1.h" -#include "quantum.h" +#pragma once +#if KEYBOARD_zen_rev1 + #include "rev1.h" +#elif KEYBOARD_zen_rev2 + #include "rev2.h" #endif +#include "quantum.h" |