diff options
| -rw-r--r-- | builddefs/common_features.mk | 9 | ||||
| -rw-r--r-- | drivers/led/ckled2001-simple.c | 218 | ||||
| -rw-r--r-- | drivers/led/ckled2001-simple.h | 337 | ||||
| -rw-r--r-- | drivers/led/ckled2001.c | 21 | ||||
| -rw-r--r-- | drivers/led/ckled2001.h | 4 | ||||
| -rw-r--r-- | quantum/led_matrix/led_matrix.h | 3 | ||||
| -rw-r--r-- | quantum/led_matrix/led_matrix_drivers.c | 51 |
7 files changed, 627 insertions, 16 deletions
diff --git a/builddefs/common_features.mk b/builddefs/common_features.mk index 755a1735e0..a23b5e82b9 100644 --- a/builddefs/common_features.mk +++ b/builddefs/common_features.mk @@ -332,7 +332,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) endif LED_MATRIX_ENABLE ?= no -VALID_LED_MATRIX_TYPES := IS31FL3731 IS31FL3742A IS31FL3743A IS31FL3745 IS31FL3746A custom +VALID_LED_MATRIX_TYPES := IS31FL3731 IS31FL3742A IS31FL3743A IS31FL3745 IS31FL3746A CKLED2001 custom # TODO: IS31FL3733 IS31FL3737 IS31FL3741 ifeq ($(strip $(LED_MATRIX_ENABLE)), yes) @@ -388,6 +388,13 @@ endif QUANTUM_LIB_SRC += i2c_master.c endif + ifeq ($(strip $(LED_MATRIX_DRIVER)), CKLED2001) + OPT_DEFS += -DCKLED2001 -DSTM32_I2C -DHAL_USE_I2C=TRUE + COMMON_VPATH += $(DRIVER_PATH)/led + SRC += ckled2001-simple.c + QUANTUM_LIB_SRC += i2c_master.c + endif + endif RGB_MATRIX_ENABLE ?= no diff --git a/drivers/led/ckled2001-simple.c b/drivers/led/ckled2001-simple.c new file mode 100644 index 0000000000..da4bf20b99 --- /dev/null +++ b/drivers/led/ckled2001-simple.c @@ -0,0 +1,218 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "ckled2001-simple.h" +#include "i2c_master.h" +#include "wait.h" + +#ifndef CKLED2001_TIMEOUT +# define CKLED2001_TIMEOUT 100 +#endif + +#ifndef CKLED2001_PERSISTENCE +# define CKLED2001_PERSISTENCE 0 +#endif + +#ifndef PHASE_CHANNEL +# define PHASE_CHANNEL MSKPHASE_12CHANNEL +#endif + +#ifndef CKLED2001_CURRENT_TUNE +# define CKLED2001_CURRENT_TUNE \ + { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the CKLED2001 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in CKLED2001_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0}; +bool g_led_control_registers_update_required[DRIVER_COUNT] = {false}; + +bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + // If the transaction fails function returns false. + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if CKLED2001_PERSISTENCE > 0 + for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) { + return false; + } +#endif + return true; +} + +bool CKLED2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // Assumes PG1 is already selected. + // If any of the transactions fails function returns false. + // Transmit PWM registers in 12 transfers of 16 bytes. + // g_twi_transfer_buffer[] is 20 bytes + + // Iterate over the pwm_buffer contents at 16 byte intervals. + for (int i = 0; i < 192; i += 16) { + g_twi_transfer_buffer[0] = i; + // Copy the data from i to i+15. + // Device will auto-increment register for data after the first byte + // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer. + for (int j = 0; j < 16; j++) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + +#if CKLED2001_PERSISTENCE > 0 + for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) { + return false; + } +#endif + } + return true; +} + +void CKLED2001_init(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to shutdown mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE); + // Setting internal channel pulldown/pullup + CKLED2001_write_register(addr, PDU_REG, MSKSET_CA_CB_CHANNEL); + // Select number of scan phase + CKLED2001_write_register(addr, SCAN_PHASE_REG, PHASE_CHANNEL); + // Setting PWM Delay Phase + CKLED2001_write_register(addr, SLEW_RATE_CONTROL_MODE1_REG, MSKPWM_DELAY_PHASE_ENABLE); + // Setting Driving/Sinking Channel Slew Rate + CKLED2001_write_register(addr, SLEW_RATE_CONTROL_MODE2_REG, MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE); + // Setting Iref + CKLED2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_DISABLE); + // Set LED CONTROL PAGE (Page 0) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0x00); + } + + // Set PWM PAGE (Page 1) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE); + for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0x00); + } + + // Set CURRENT PAGE (Page 4) + uint8_t current_tuen_reg_list[LED_CURRENT_TUNE_LENGTH] = CKLED2001_CURRENT_TUNE; + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE); + for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { + CKLED2001_write_register(addr, i, current_tuen_reg_list[i]); + } + + // Enable LEDs ON/OFF + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0xFF); + } + + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to normal mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); +} + +void CKLED2001_set_value(int index, uint8_t value) { + ckled2001_led led; + if (index >= 0 && index < DRIVER_LED_TOTAL) { + memcpy_P(&led, (&g_ckled2001_leds[index]), sizeof(led)); + + g_pwm_buffer[led.driver][led.v] = value; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void CKLED2001_set_value_all(uint8_t value) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + CKLED2001_set_value(i, value); + } +} + +void CKLED2001_set_led_control_register(uint8_t index, bool value) { + ckled2001_led led; + memcpy_P(&led, (&g_ckled2001_leds[index]), sizeof(led)); + + uint8_t control_register = led.v / 8; + uint8_t bit_value = led.v % 8; + + if (value) { + g_led_control_registers[led.driver][control_register] |= (1 << bit_value); + } else { + g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE); + + // If any of the transactions fail we risk writing dirty PG0, + // refresh page 0 just in case. + if (!CKLED2001_write_pwm_buffer(addr, g_pwm_buffer[index])) { + g_led_control_registers_update_required[index] = true; + } + } + g_pwm_buffer_update_required[index] = false; +} + +void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < 24; i++) { + CKLED2001_write_register(addr, i, g_led_control_registers[index][i]); + } + } + g_led_control_registers_update_required[index] = false; +} + +void CKLED2001_sw_return_normal(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to normal mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); +} + +void CKLED2001_sw_shutdown(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to shutdown mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE); + // Write SW Sleep Register + CKLED2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_ENABLE); +} diff --git a/drivers/led/ckled2001-simple.h b/drivers/led/ckled2001-simple.h new file mode 100644 index 0000000000..731da2e1cd --- /dev/null +++ b/drivers/led/ckled2001-simple.h @@ -0,0 +1,337 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> +#include "progmem.h" + +typedef struct ckled2001_led { + uint8_t driver : 2; + uint8_t v; +} __attribute__((packed)) ckled2001_led; + +extern const ckled2001_led PROGMEM g_ckled2001_leds[DRIVER_LED_TOTAL]; + +void CKLED2001_init(uint8_t addr); +bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data); +bool CKLED2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer); + +void CKLED2001_set_value(int index, uint8_t value); +void CKLED2001_set_value_all(uint8_t value); + +void CKLED2001_set_led_control_register(uint8_t index, bool value); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index); +void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index); + +void CKLED2001_sw_return_normal(uint8_t addr); +void CKLED2001_sw_shutdown(uint8_t addr); + +// Registers Page Define +#define CONFIGURE_CMD_PAGE 0xFD +#define LED_CONTROL_PAGE 0x00 +#define LED_PWM_PAGE 0x01 +#define FUNCTION_PAGE 0x03 +#define CURRENT_TUNE_PAGE 0x04 + +// Function Register: address 0x00 +#define CONFIGURATION_REG 0x00 +#define MSKSW_SHUT_DOWN_MODE (0x0 << 0) +#define MSKSW_NORMAL_MODE (0x1 << 0) + +#define DRIVER_ID_REG 0x11 +#define CKLED2001_ID 0x8A + +#define PDU_REG 0x13 +#define MSKSET_CA_CB_CHANNEL 0xAA +#define MSKCLR_CA_CB_CHANNEL 0x00 + +#define SCAN_PHASE_REG 0x14 +#define MSKPHASE_12CHANNEL 0x00 +#define MSKPHASE_11CHANNEL 0x01 +#define MSKPHASE_10CHANNEL 0x02 +#define MSKPHASE_9CHANNEL 0x03 +#define MSKPHASE_8CHANNEL 0x04 +#define MSKPHASE_7CHANNEL 0x05 +#define MSKPHASE_6CHANNEL 0x06 +#define MSKPHASE_5CHANNEL 0x07 +#define MSKPHASE_4CHANNEL 0x08 +#define MSKPHASE_3CHANNEL 0x09 +#define MSKPHASE_2CHANNEL 0x0A +#define MSKPHASE_1CHANNEL 0x0B + +#define SLEW_RATE_CONTROL_MODE1_REG 0x15 +#define MSKPWM_DELAY_PHASE_ENABLE 0x04 +#define MSKPWM_DELAY_PHASE_DISABLE 0x00 + +#define SLEW_RATE_CONTROL_MODE2_REG 0x16 +#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE 0xC0 +#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_DISABLE 0x00 + +#define OPEN_SHORT_ENABLE_REG 0x17 +#define MSKOPEN_DETECTION_ENABLE (0x01 << 7) +#define MSKOPEN_DETECTION_DISABLE (0x00) + +#define MSKSHORT_DETECTION_ENABLE (0x01 << 6) +#define MSKSHORT_DETECTION_DISABLE (0x00) + +#define OPEN_SHORT_DUTY_REG 0x18 +#define OPEN_SHORT_FLAG_REG 0x19 + +#define MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7) +#define MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00) + +#define MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6) +#define MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00) + +#define SOFTWARE_SLEEP_REG 0x1A +#define MSKSLEEP_ENABLE 0x02 +#define MSKSLEEP_DISABLE 0x00 + +// LED Control Registers +#define LED_CONTROL_ON_OFF_FIRST_ADDR 0x0 +#define LED_CONTROL_ON_OFF_LAST_ADDR 0x17 +#define LED_CONTROL_ON_OFF_LENGTH ((LED_CONTROL_ON_OFF_LAST_ADDR - LED_CONTROL_ON_OFF_FIRST_ADDR) + 1) + +#define LED_CONTROL_OPEN_FIRST_ADDR 0x18 +#define LED_CONTROL_OPEN_LAST_ADDR 0x2F +#define LED_CONTROL_OPEN_LENGTH ((LED_CONTROL_OPEN_LAST_ADDR - LED_CONTROL_OPEN_FIRST_ADDR) + 1) + +#define LED_CONTROL_SHORT_FIRST_ADDR 0x30 +#define LED_CONTROL_SHORT_LAST_ADDR 0x47 +#define LED_CONTROL_SHORT_LENGTH ((LED_CONTROL_SHORT_LAST_ADDR - LED_CONTROL_SHORT_FIRST_ADDR) + 1) + +#define LED_CONTROL_PAGE_LENGTH 0x48 + +// LED Control Registers +#define LED_PWM_FIRST_ADDR 0x00 +#define LED_PWM_LAST_ADDR 0xBF +#define LED_PWM_LENGTH 0xC0 + +// Current Tune Registers +#define LED_CURRENT_TUNE_FIRST_ADDR 0x00 +#define LED_CURRENT_TUNE_LAST_ADDR 0x0B +#define LED_CURRENT_TUNE_LENGTH 0x0C + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x06 +#define A_8 0x07 +#define A_9 0x08 +#define A_10 0x09 +#define A_11 0x0A +#define A_12 0x0B +#define A_13 0x0C +#define A_14 0x0D +#define A_15 0x0E +#define A_16 0x0F + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x16 +#define B_8 0x17 +#define B_9 0x18 +#define B_10 0x19 +#define B_11 0x1A +#define B_12 0x1B +#define B_13 0x1C +#define B_14 0x1D +#define B_15 0x1E +#define B_16 0x1F + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x26 +#define C_8 0x27 +#define C_9 0x28 +#define C_10 0x29 +#define C_11 0x2A +#define C_12 0x2B +#define C_13 0x2C +#define C_14 0x2D +#define C_15 0x2E +#define C_16 0x2F + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x36 +#define D_8 0x37 +#define D_9 0x38 +#define D_10 0x39 +#define D_11 0x3A +#define D_12 0x3B +#define D_13 0x3C +#define D_14 0x3D +#define D_15 0x3E +#define D_16 0x3F + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x46 +#define E_8 0x47 +#define E_9 0x48 +#define E_10 0x49 +#define E_11 0x4A +#define E_12 0x4B +#define E_13 0x4C +#define E_14 0x4D +#define E_15 0x4E +#define E_16 0x4F + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x56 +#define F_8 0x57 +#define F_9 0x58 +#define F_10 0x59 +#define F_11 0x5A +#define F_12 0x5B +#define F_13 0x5C +#define F_14 0x5D +#define F_15 0x5E +#define F_16 0x5F + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x66 +#define G_8 0x67 +#define G_9 0x68 +#define G_10 0x69 +#define G_11 0x6A +#define G_12 0x6B +#define G_13 0x6C +#define G_14 0x6D +#define G_15 0x6E +#define G_16 0x6F + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x76 +#define H_8 0x77 +#define H_9 0x78 +#define H_10 0x79 +#define H_11 0x7A +#define H_12 0x7B +#define H_13 0x7C +#define H_14 0x7D +#define H_15 0x7E +#define H_16 0x7F + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x86 +#define I_8 0x87 +#define I_9 0x88 +#define I_10 0x89 +#define I_11 0x8A +#define I_12 0x8B +#define I_13 0x8C +#define I_14 0x8D +#define I_15 0x8E +#define I_16 0x8F + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x96 +#define J_8 0x97 +#define J_9 0x98 +#define J_10 0x99 +#define J_11 0x9A +#define J_12 0x9B +#define J_13 0x9C +#define J_14 0x9D +#define J_15 0x9E +#define J_16 0x9F + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA6 +#define K_8 0xA7 +#define K_9 0xA8 +#define K_10 0xA9 +#define K_11 0xAA +#define K_12 0xAB +#define K_13 0xAC +#define K_14 0xAD +#define K_15 0xAE +#define K_16 0xAF + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB6 +#define L_8 0xB7 +#define L_9 0xB8 +#define L_10 0xB9 +#define L_11 0xBA +#define L_12 0xBB +#define L_13 0xBC +#define L_14 0xBD +#define L_15 0xBE +#define L_16 0xBF
\ No newline at end of file diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c index 8d71805a24..b7e7db06cc 100644 --- a/drivers/led/ckled2001.c +++ b/drivers/led/ckled2001.c @@ -30,6 +30,11 @@ # define PHASE_CHANNEL MSKPHASE_12CHANNEL #endif +#ifndef CKLED2001_CURRENT_TUNE +# define CKLED2001_CURRENT_TUNE \ + { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF } +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -123,18 +128,10 @@ void CKLED2001_init(uint8_t addr) { } // Set CURRENT PAGE (Page 4) + uint8_t current_tuen_reg_list[LED_CURRENT_TUNE_LENGTH] = CKLED2001_CURRENT_TUNE; CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE); for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { - switch (i) { - case 2: - case 5: - case 8: - case 11: - CKLED2001_write_register(addr, i, 0xA0); - break; - default: - CKLED2001_write_register(addr, i, 0xFF); - } + CKLED2001_write_register(addr, i, current_tuen_reg_list[i]); } // Enable LEDs ON/OFF @@ -220,14 +217,14 @@ void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index) { g_led_control_registers_update_required[index] = false; } -void CKLED2001_return_normal(uint8_t addr) { +void CKLED2001_sw_return_normal(uint8_t addr) { // Select to function page CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); // Setting LED driver to normal mode CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); } -void CKLED2001_shutdown(uint8_t addr) { +void CKLED2001_sw_shutdown(uint8_t addr) { // Select to function page CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); // Setting LED driver to shutdown mode diff --git a/drivers/led/ckled2001.h b/drivers/led/ckled2001.h index 1967961d20..7d5ad34f95 100644 --- a/drivers/led/ckled2001.h +++ b/drivers/led/ckled2001.h @@ -45,8 +45,8 @@ void CKLED2001_set_led_control_register(uint8_t index, bool red, bool green, boo void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index); void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index); -void CKLED2001_return_normal(uint8_t addr); -void CKLED2001_shutdown(uint8_t addr); +void CKLED2001_sw_return_normal(uint8_t addr); +void CKLED2001_sw_shutdown(uint8_t addr); // Registers Page Define #define CONFIGURE_CMD_PAGE 0xFD diff --git a/quantum/led_matrix/led_matrix.h b/quantum/led_matrix/led_matrix.h index b2abec7eb1..446f293c78 100644 --- a/quantum/led_matrix/led_matrix.h +++ b/quantum/led_matrix/led_matrix.h @@ -33,6 +33,9 @@ #ifdef IS31FL3733 # include "is31fl3733-simple.h" #endif +#ifdef CKLED2001 +# include "ckled2001-simple.h" +#endif #ifndef LED_MATRIX_LED_FLUSH_LIMIT # define LED_MATRIX_LED_FLUSH_LIMIT 16 diff --git a/quantum/led_matrix/led_matrix_drivers.c b/quantum/led_matrix/led_matrix_drivers.c index 847ca1c310..f01b395c15 100644 --- a/quantum/led_matrix/led_matrix_drivers.c +++ b/quantum/led_matrix/led_matrix_drivers.c @@ -25,7 +25,7 @@ * in their own files. */ -#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FLCOMMON) +#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FLCOMMON) || defined(CKLED2001) # include "i2c_master.h" static void init(void) { @@ -78,6 +78,22 @@ static void init(void) { # endif # endif # endif +# elif defined(CKLED2001) +# if defined(LED_DRIVER_SHUTDOWN_PIN) + setPinOutput(LED_DRIVER_SHUTDOWN_PIN); + writePinHigh(LED_DRIVER_SHUTDOWN_PIN); +# endif + + CKLED2001_init(DRIVER_ADDR_1); +# if defined(DRIVER_ADDR_2) + CKLED2001_init(DRIVER_ADDR_2); +# if defined(DRIVER_ADDR_3) + CKLED2001_init(DRIVER_ADDR_3); +# if defined(DRIVER_ADDR_4) + CKLED2001_init(DRIVER_ADDR_4); +# endif +# endif +# endif # endif for (int index = 0; index < DRIVER_LED_TOTAL; index++) { @@ -87,6 +103,8 @@ static void init(void) { IS31FL3733_set_led_control_register(index, true); # elif defined(IS31FLCOMMON) IS31FL_simple_set_scaling_buffer(index, true); +# elif defined(CKLED2001) + CKLED2001_set_led_control_register(index, true); # endif } @@ -129,6 +147,17 @@ static void init(void) { # endif # endif # endif +# elif defined(CKLED2001) + CKLED2001_update_led_control_registers(DRIVER_ADDR_1, 0); +# if defined(DRIVER_ADDR_2) + CKLED2001_update_led_control_registers(DRIVER_ADDR_2, 1); +# if defined(DRIVER_ADDR_3) + CKLED2001_update_led_control_registers(DRIVER_ADDR_3, 2); +# if defined(DRIVER_ADDR_4) + CKLED2001_update_led_control_registers(DRIVER_ADDR_4, 3); +# endif +# endif +# endif # endif } @@ -194,5 +223,25 @@ const led_matrix_driver_t led_matrix_driver = { .set_value = IS31FL_simple_set_brightness, .set_value_all = IS31FL_simple_set_brigntness_all, }; +# elif defined(CKLED2001) +static void flush(void) { + CKLED2001_update_pwm_buffers(DRIVER_ADDR_1, 0); +# if defined(DRIVER_ADDR_2) + CKLED2001_update_pwm_buffers(DRIVER_ADDR_2, 1); +# if defined(DRIVER_ADDR_3) + CKLED2001_update_pwm_buffers(DRIVER_ADDR_3, 2); +# if defined(DRIVER_ADDR_4) + CKLED2001_update_pwm_buffers(DRIVER_ADDR_4, 3); +# endif +# endif +# endif +} + +const led_matrix_driver_t led_matrix_driver = { + .init = init, + .flush = flush, + .set_value = CKLED2001_set_value, + .set_value_all = CKLED2001_set_value_all, +}; # endif #endif |