summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--build_keyboard.mk4
-rw-r--r--docs/ja/proton_c_conversion.md1
-rw-r--r--docs/proton_c_conversion.md1
-rw-r--r--docs/serial_driver.md1
-rw-r--r--drivers/chibios/serial_usart.c13
-rw-r--r--keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk1
-rw-r--r--keyboards/acheron/shark/rules.mk1
-rw-r--r--keyboards/atreus/keymaps/ridingqwerty/rules.mk1
-rw-r--r--keyboards/boston_meetup/2019/rules.mk1
-rw-r--r--keyboards/c39/keymaps/drashna/rules.mk1
-rwxr-xr-xkeyboards/ckeys/thedora/rules.mk1
-rw-r--r--keyboards/clueboard/60/rules.mk1
-rw-r--r--keyboards/clueboard/66/rev4/rules.mk1
-rw-r--r--keyboards/clueboard/66_hotswap/gen1/rules.mk1
-rw-r--r--keyboards/clueboard/california/rules.mk1
-rw-r--r--keyboards/dztech/dz60rgb/v1/rules.mk1
-rw-r--r--keyboards/dztech/dz60rgb_ansi/v1/rules.mk1
-rw-r--r--keyboards/dztech/dz60rgb_wkl/v1/rules.mk1
-rw-r--r--keyboards/dztech/dz65rgb/v1/rules.mk1
-rw-r--r--keyboards/hadron/ver3/rules.mk1
-rw-r--r--keyboards/handwired/co60/rev6/rules.mk1
-rw-r--r--keyboards/handwired/co60/rev7/rules.mk1
-rw-r--r--keyboards/handwired/d48/rules.mk1
-rw-r--r--keyboards/handwired/ddg_56/rules.mk1
-rw-r--r--keyboards/handwired/floorboard/rules.mk1
-rw-r--r--keyboards/handwired/onekey/blackpill_f401/chconf.h (renamed from platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h)0
-rw-r--r--keyboards/handwired/onekey/blackpill_f411/chconf.h (renamed from platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h)0
-rw-r--r--keyboards/handwired/onekey/proton_c/rules.mk1
-rw-r--r--keyboards/handwired/onekey/pytest/rules.mk1
-rw-r--r--keyboards/handwired/pill60/blackpill_f401/chconf.h714
-rw-r--r--keyboards/handwired/pill60/blackpill_f411/chconf.h714
-rw-r--r--keyboards/handwired/riblee_f401/chconf.h714
-rw-r--r--keyboards/handwired/riblee_f401/halconf.h (renamed from platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h)0
-rw-r--r--keyboards/handwired/riblee_f401/mcuconf.h253
-rw-r--r--keyboards/handwired/riblee_f411/chconf.h714
-rw-r--r--keyboards/handwired/selene/rules.mk1
-rw-r--r--keyboards/handwired/sick_pad/rules.mk1
-rw-r--r--keyboards/handwired/steamvan/rev1/rules.mk1
-rw-r--r--keyboards/handwired/wulkan/rules.mk1
-rw-r--r--keyboards/hs60/v2/ansi/rules.mk1
-rw-r--r--keyboards/hs60/v2/hhkb/rules.mk1
-rw-r--r--keyboards/hs60/v2/iso/rules.mk1
-rw-r--r--keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk1
-rw-r--r--keyboards/kv/revt/rules.mk1
-rw-r--r--keyboards/mechlovin/adelais/rules.mk1
-rw-r--r--keyboards/mechlovin/hannah60rgb/rules.mk1
-rw-r--r--keyboards/mechlovin/hannah65/rules.mk1
-rw-r--r--keyboards/mechlovin/infinity87/rules.mk1
-rw-r--r--keyboards/mechlovin/infinity88/rules.mk1
-rw-r--r--keyboards/melgeek/mj61/rev1/rules.mk1
-rw-r--r--keyboards/melgeek/mj63/rev1/rules.mk1
-rw-r--r--keyboards/melgeek/mj64/rev1/rules.mk1
-rw-r--r--keyboards/melgeek/mj64/rev2/rules.mk1
-rw-r--r--keyboards/melgeek/mojo75/rev1/rules.mk1
-rw-r--r--keyboards/melgeek/z70ultra/rev1/rules.mk1
-rw-r--r--keyboards/moonlander/rules.mk1
-rw-r--r--keyboards/nack/rules.mk1
-rwxr-xr-xkeyboards/nebula68/rules.mk1
-rwxr-xr-xkeyboards/nk65/rules.mk1
-rwxr-xr-xkeyboards/nk87/rules.mk1
-rw-r--r--keyboards/planck/ez/rules.mk1
-rw-r--r--keyboards/planck/rev6/rules.mk1
-rw-r--r--keyboards/preonic/rev3/rules.mk1
-rw-r--r--keyboards/rgbkb/pan/rev1/proton_c/rules.mk1
-rw-r--r--keyboards/yugo_m/model_m_101/rules.mk1
-rw-r--r--platforms/chibios/GENERIC_STM32_F042X6/configs/config.h20
-rw-r--r--platforms/chibios/GENERIC_STM32_F072XB/configs/config.h20
-rw-r--r--platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h4
-rw-r--r--platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h22
-rw-r--r--platforms/chibios/QMK_PROTON_C/board/board.mk9
-rw-r--r--platforms/chibios/QMK_PROTON_C/configs/board.h37
-rw-r--r--platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h7
-rw-r--r--platforms/chibios/QMK_PROTON_C/configs/chconf.h714
-rw-r--r--platforms/chibios/QMK_PROTON_C/configs/config.h20
-rw-r--r--platforms/chibios/QMK_PROTON_C/configs/halconf.h (renamed from platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h)20
-rw-r--r--platforms/chibios/QMK_PROTON_C/configs/mcuconf.h273
-rw-r--r--platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk (renamed from platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk)7
-rw-r--r--platforms/chibios/common/configs/chconf.h20
-rw-r--r--platforms/chibios/common/configs/halconf.h18
-rw-r--r--quantum/quantum.h1
-rw-r--r--quantum/rgb_matrix.c6
-rw-r--r--quantum/rgblight.c21
-rw-r--r--quantum/split_common/transport.c26
-rw-r--r--readme.md6
-rw-r--r--tmk_core/chibios.mk3
-rw-r--r--tmk_core/common.mk1
-rw-r--r--tmk_core/common/keyboard.c2
-rw-r--r--tmk_core/common/sync_timer.c58
-rw-r--r--tmk_core/common/sync_timer.h54
-rwxr-xr-xutil/chibios_conf_updater.sh (renamed from util/chibios-upgrader.sh)10
90 files changed, 4492 insertions, 68 deletions
diff --git a/build_keyboard.mk b/build_keyboard.mk
index e87dcb8f22..8d018f2e3c 100644
--- a/build_keyboard.mk
+++ b/build_keyboard.mk
@@ -136,9 +136,7 @@ ifeq ($(strip $(CTPC)), yes)
endif
ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
- TARGET := $(TARGET)_proton_c
- include platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk
- OPT_DEFS += -DCONVERT_TO_PROTON_C
+ include platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk
endif
ifneq ($(FORCE_LAYOUT),)
diff --git a/docs/ja/proton_c_conversion.md b/docs/ja/proton_c_conversion.md
index 6e4f7dcb66..e7c07413ce 100644
--- a/docs/ja/proton_c_conversion.md
+++ b/docs/ja/proton_c_conversion.md
@@ -51,6 +51,7 @@ Proton C には1つのオンボード LED(C13)しかなく、デフォルトで
```
MCU = STM32F303
+BOARD = QMK_PROTON_C
```
次の変数が存在する場合は削除します。
diff --git a/docs/proton_c_conversion.md b/docs/proton_c_conversion.md
index 1b5e496e74..47511e1b1e 100644
--- a/docs/proton_c_conversion.md
+++ b/docs/proton_c_conversion.md
@@ -44,6 +44,7 @@ To use the Proton C natively, without having to specify `CTPC=yes`, you need to
```
MCU = STM32F303
+BOARD = QMK_PROTON_C
```
Remove these variables if they exist:
diff --git a/docs/serial_driver.md b/docs/serial_driver.md
index bc376b6ddd..c98f4c1176 100644
--- a/docs/serial_driver.md
+++ b/docs/serial_driver.md
@@ -60,6 +60,7 @@ Configure the hardware via your config.h:
// 5: about 19200 baud
#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
+#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
```
You must also enable the ChibiOS `SERIAL` feature:
diff --git a/drivers/chibios/serial_usart.c b/drivers/chibios/serial_usart.c
index 62b4913cbf..72fcaed0c7 100644
--- a/drivers/chibios/serial_usart.c
+++ b/drivers/chibios/serial_usart.c
@@ -58,7 +58,10 @@
# error invalid SELECT_SOFT_SERIAL_SPEED value
#endif
-#define TIMEOUT 100
+#ifndef SERIAL_USART_TIMEOUT
+# define SERIAL_USART_TIMEOUT 100
+#endif
+
#define HANDSHAKE_MAGIC 7
static inline msg_t sdWriteHalfDuplex(SerialDriver* driver, uint8_t* data, uint8_t size) {
@@ -201,21 +204,21 @@ int soft_serial_transaction(int index) {
sdClear(&SERIAL_USART_DRIVER);
// First chunk is always transaction id
- sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(TIMEOUT));
+ sdWriteTimeout(&SERIAL_USART_DRIVER, &sstd_index, sizeof(sstd_index), TIME_MS2I(SERIAL_USART_TIMEOUT));
uint8_t sstd_index_shake = 0xFF;
// Which we always read back first so that we can error out correctly
// - due to the half duplex limitations on return codes, we always have to read *something*
// - without the read, write only transactions *always* succeed, even during the boot process where the slave is not ready
- res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(TIMEOUT));
+ res = sdReadTimeout(&SERIAL_USART_DRIVER, &sstd_index_shake, sizeof(sstd_index_shake), TIME_MS2I(SERIAL_USART_TIMEOUT));
if (res < 0 || (sstd_index_shake != (sstd_index ^ HANDSHAKE_MAGIC))) {
dprintf("serial::usart_shake NO_RESPONSE\n");
return TRANSACTION_NO_RESPONSE;
}
if (trans->initiator2target_buffer_size) {
- res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(TIMEOUT));
+ res = sdWriteTimeout(&SERIAL_USART_DRIVER, trans->initiator2target_buffer, trans->initiator2target_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT));
if (res < 0) {
dprintf("serial::usart_transmit NO_RESPONSE\n");
return TRANSACTION_NO_RESPONSE;
@@ -223,7 +226,7 @@ int soft_serial_transaction(int index) {
}
if (trans->target2initiator_buffer_size) {
- res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(TIMEOUT));
+ res = sdReadTimeout(&SERIAL_USART_DRIVER, trans->target2initiator_buffer, trans->target2initiator_buffer_size, TIME_MS2I(SERIAL_USART_TIMEOUT));
if (res < 0) {
dprintf("serial::usart_receive NO_RESPONSE\n");
return TRANSACTION_NO_RESPONSE;
diff --git a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
index dedcf043af..6fb15f5a83 100644
--- a/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
+++ b/keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
## Features
CONSOLE_ENABLE = yes
diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk
index 1bd963c817..214c995ae9 100644
--- a/keyboards/acheron/shark/rules.mk
+++ b/keyboards/acheron/shark/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/atreus/keymaps/ridingqwerty/rules.mk b/keyboards/atreus/keymaps/ridingqwerty/rules.mk
index 5c89d5481d..ebf83f02e8 100644
--- a/keyboards/atreus/keymaps/ridingqwerty/rules.mk
+++ b/keyboards/atreus/keymaps/ridingqwerty/rules.mk
@@ -1,4 +1,5 @@
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/boston_meetup/2019/rules.mk b/keyboards/boston_meetup/2019/rules.mk
index aa35ba7539..9076d9ab4d 100644
--- a/keyboards/boston_meetup/2019/rules.mk
+++ b/keyboards/boston_meetup/2019/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk
index 6ebd15a180..09c29f0e8f 100644
--- a/keyboards/c39/keymaps/drashna/rules.mk
+++ b/keyboards/c39/keymaps/drashna/rules.mk
@@ -1,4 +1,5 @@
MCU = STM32F303
+BOARD = QMK_PROTON_C
BOOTLOADER =
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
diff --git a/keyboards/ckeys/thedora/rules.mk b/keyboards/ckeys/thedora/rules.mk
index 92665ffb6d..8394b1a6cc 100755
--- a/keyboards/ckeys/thedora/rules.mk
+++ b/keyboards/ckeys/thedora/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/clueboard/60/rules.mk b/keyboards/clueboard/60/rules.mk
index a9151b87d2..87f56692f6 100644
--- a/keyboards/clueboard/60/rules.mk
+++ b/keyboards/clueboard/60/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/clueboard/66/rev4/rules.mk b/keyboards/clueboard/66/rev4/rules.mk
index f8e4c07a47..f6120c929f 100644
--- a/keyboards/clueboard/66/rev4/rules.mk
+++ b/keyboards/clueboard/66/rev4/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk
index 3667d63b76..c508ecbb54 100644
--- a/keyboards/clueboard/66_hotswap/gen1/rules.mk
+++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# LED Configuration
LED_MATRIX_ENABLE = yes
diff --git a/keyboards/clueboard/california/rules.mk b/keyboards/clueboard/california/rules.mk
index e96afd8135..11719015e9 100644
--- a/keyboards/clueboard/california/rules.mk
+++ b/keyboards/clueboard/california/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
## Features
MOUSEKEY_ENABLE = yes # Mouse keys
diff --git a/keyboards/dztech/dz60rgb/v1/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk
index d71fb4c531..88207bc3f5 100644
--- a/keyboards/dztech/dz60rgb/v1/rules.mk
+++ b/keyboards/dztech/dz60rgb/v1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk
index d71fb4c531..88207bc3f5 100644
--- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk
+++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk
index 9dfe170032..426769e248 100644
--- a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk
+++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/dztech/dz65rgb/v1/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk
index 4570dc3bd3..da88300da5 100644
--- a/keyboards/dztech/dz65rgb/v1/rules.mk
+++ b/keyboards/dztech/dz65rgb/v1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk
index 6c13bd2bc1..e75b0c721a 100644
--- a/keyboards/hadron/ver3/rules.mk
+++ b/keyboards/hadron/ver3/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/handwired/co60/rev6/rules.mk b/keyboards/handwired/co60/rev6/rules.mk
index b20c2efedc..f4e7ae924d 100644
--- a/keyboards/handwired/co60/rev6/rules.mk
+++ b/keyboards/handwired/co60/rev6/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/handwired/co60/rev7/rules.mk b/keyboards/handwired/co60/rev7/rules.mk
index 50e4bb8918..3e15f073ff 100644
--- a/keyboards/handwired/co60/rev7/rules.mk
+++ b/keyboards/handwired/co60/rev7/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Use SPI for RGB underglow:
WS2812_DRIVER = spi
diff --git a/keyboards/handwired/d48/rules.mk b/keyboards/handwired/d48/rules.mk
index 57c83694e1..41a6cc5220 100644
--- a/keyboards/handwired/d48/rules.mk
+++ b/keyboards/handwired/d48/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk
index 0604f11763..dfbb0959f9 100644
--- a/keyboards/handwired/ddg_56/rules.mk
+++ b/keyboards/handwired/ddg_56/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk
index 5a83cfcf96..88bc406a23 100644
--- a/keyboards/handwired/floorboard/rules.mk
+++ b/keyboards/handwired/floorboard/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h b/keyboards/handwired/onekey/blackpill_f401/chconf.h
index 7dc4f84a8a..7dc4f84a8a 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/chconf.h
+++ b/keyboards/handwired/onekey/blackpill_f401/chconf.h
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h b/keyboards/handwired/onekey/blackpill_f411/chconf.h
index 7dc4f84a8a..7dc4f84a8a 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/chconf.h
+++ b/keyboards/handwired/onekey/blackpill_f411/chconf.h
diff --git a/keyboards/handwired/onekey/proton_c/rules.mk b/keyboards/handwired/onekey/proton_c/rules.mk
index b17a3d0316..4e157baeda 100644
--- a/keyboards/handwired/onekey/proton_c/rules.mk
+++ b/keyboards/handwired/onekey/proton_c/rules.mk
@@ -1,2 +1,3 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
diff --git a/keyboards/handwired/onekey/pytest/rules.mk b/keyboards/handwired/onekey/pytest/rules.mk
index b17a3d0316..4e157baeda 100644
--- a/keyboards/handwired/onekey/pytest/rules.mk
+++ b/keyboards/handwired/onekey/pytest/rules.mk
@@ -1,2 +1,3 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
diff --git a/keyboards/handwired/pill60/blackpill_f401/chconf.h b/keyboards/handwired/pill60/blackpill_f401/chconf.h
new file mode 100644
index 0000000000..7dc4f84a8a
--- /dev/null
+++ b/keyboards/handwired/pill60/blackpill_f401/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/handwired/pill60/blackpill_f411/chconf.h b/keyboards/handwired/pill60/blackpill_f411/chconf.h
new file mode 100644
index 0000000000..7dc4f84a8a
--- /dev/null
+++ b/keyboards/handwired/pill60/blackpill_f411/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/handwired/riblee_f401/chconf.h b/keyboards/handwired/riblee_f401/chconf.h
new file mode 100644
index 0000000000..7dc4f84a8a
--- /dev/null
+++ b/keyboards/handwired/riblee_f401/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h b/keyboards/handwired/riblee_f401/halconf.h
index a8db392aaa..a8db392aaa 100644
--- a/platforms/chibios/BLACKPILL_STM32_F401/configs/halconf.h
+++ b/keyboards/handwired/riblee_f401/halconf.h
diff --git a/keyboards/handwired/riblee_f401/mcuconf.h b/keyboards/handwired/riblee_f401/mcuconf.h
new file mode 100644
index 0000000000..ba6e934fe7
--- /dev/null
+++ b/keyboards/handwired/riblee_f401/mcuconf.h
@@ -0,0 +1,253 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 25
+#define STM32_PLLN_VALUE 336
+#define STM32_PLLP_VALUE 4
+#define STM32_PLLQ_VALUE 7
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV4
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 6
+#define STM32_IRQ_EXTI20_PRIORITY 6
+#define STM32_IRQ_EXTI21_PRIORITY 15
+#define STM32_IRQ_EXTI22_PRIORITY 15
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM5 FALSE
+#define STM32_GPT_USE_TIM9 FALSE
+#define STM32_GPT_USE_TIM11 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM5_IRQ_PRIORITY 7
+#define STM32_GPT_TIM9_IRQ_PRIORITY 7
+#define STM32_GPT_TIM11_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_USE_I2C3 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 5
+#define STM32_I2C_I2C2_IRQ_PRIORITY 5
+#define STM32_I2C_I2C3_IRQ_PRIORITY 5
+#define STM32_I2C_I2C1_DMA_PRIORITY 3
+#define STM32_I2C_I2C2_DMA_PRIORITY 3
+#define STM32_I2C_I2C3_DMA_PRIORITY 3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2 FALSE
+#define STM32_I2S_USE_SPI3 FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY 10
+#define STM32_I2S_SPI3_IRQ_PRIORITY 10
+#define STM32_I2S_SPI2_DMA_PRIORITY 1
+#define STM32_I2S_SPI3_DMA_PRIORITY 1
+#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM5 FALSE
+#define STM32_ICU_USE_TIM9 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM5_IRQ_PRIORITY 7
+#define STM32_ICU_TIM9_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
+#define STM32_PWM_USE_TIM5 FALSE
+#define STM32_PWM_USE_TIM9 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM5_IRQ_PRIORITY 7
+#define STM32_PWM_TIM9_IRQ_PRIORITY 7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USE_USART6 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART6_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART6 FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART6_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART6_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1 TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY 14
+#define STM32_USB_OTG1_RX_FIFO_SIZE 512
+#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1
+#define STM32_USB_OTG_THREAD_STACK_SIZE 128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/keyboards/handwired/riblee_f411/chconf.h b/keyboards/handwired/riblee_f411/chconf.h
new file mode 100644
index 0000000000..7dc4f84a8a
--- /dev/null
+++ b/keyboards/handwired/riblee_f411/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 10000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/keyboards/handwired/selene/rules.mk b/keyboards/handwired/selene/rules.mk
index 9416bc5fd3..bfb967f9a5 100644
--- a/keyboards/handwired/selene/rules.mk
+++ b/keyboards/handwired/selene/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/handwired/sick_pad/rules.mk b/keyboards/handwired/sick_pad/rules.mk
index bfe731ecce..28578f0824 100644
--- a/keyboards/handwired/sick_pad/rules.mk
+++ b/keyboards/handwired/sick_pad/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/handwired/steamvan/rev1/rules.mk b/keyboards/handwired/steamvan/rev1/rules.mk
index 797d7b35da..30c74d2ece 100644
--- a/keyboards/handwired/steamvan/rev1/rules.mk
+++ b/keyboards/handwired/steamvan/rev1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Use SPI for RGB underglow:
WS2812_DRIVER = spi
diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk
index 25bb402698..b23f2a5fe1 100644
--- a/keyboards/handwired/wulkan/rules.mk
+++ b/keyboards/handwired/wulkan/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# comment out to disable the options.
diff --git a/keyboards/hs60/v2/ansi/rules.mk b/keyboards/hs60/v2/ansi/rules.mk
index 8efabcccbf..74889decfb 100644
--- a/keyboards/hs60/v2/ansi/rules.mk
+++ b/keyboards/hs60/v2/ansi/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
diff --git a/keyboards/hs60/v2/hhkb/rules.mk b/keyboards/hs60/v2/hhkb/rules.mk
index 14951cca70..561a8cd06a 100644
--- a/keyboards/hs60/v2/hhkb/rules.mk
+++ b/keyboards/hs60/v2/hhkb/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
diff --git a/keyboards/hs60/v2/iso/rules.mk b/keyboards/hs60/v2/iso/rules.mk
index 96bfbce056..62af70cc05 100644
--- a/keyboards/hs60/v2/iso/rules.mk
+++ b/keyboards/hs60/v2/iso/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk
index 4e9bcf21a7..4e79819ff7 100644
--- a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk
+++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
BACKLIGHT_ENABLE = no
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
diff --git a/keyboards/kv/revt/rules.mk b/keyboards/kv/revt/rules.mk
index d97369b150..94db629541 100644
--- a/keyboards/kv/revt/rules.mk
+++ b/keyboards/kv/revt/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk
index 0b6e62c603..698865d3e9 100644
--- a/keyboards/mechlovin/adelais/rules.mk
+++ b/keyboards/mechlovin/adelais/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk
index eb9b152838..2fe4bb7aa5 100644
--- a/keyboards/mechlovin/hannah60rgb/rules.mk
+++ b/keyboards/mechlovin/hannah60rgb/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/mechlovin/hannah65/rules.mk b/keyboards/mechlovin/hannah65/rules.mk
index 74157ae715..57ead17faa 100644
--- a/keyboards/mechlovin/hannah65/rules.mk
+++ b/keyboards/mechlovin/hannah65/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/mechlovin/infinity87/rules.mk b/keyboards/mechlovin/infinity87/rules.mk
index 00676c2ecb..a405eda037 100644
--- a/keyboards/mechlovin/infinity87/rules.mk
+++ b/keyboards/mechlovin/infinity87/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/mechlovin/infinity88/rules.mk b/keyboards/mechlovin/infinity88/rules.mk
index 7897007c01..40e4543e89 100644
--- a/keyboards/mechlovin/infinity88/rules.mk
+++ b/keyboards/mechlovin/infinity88/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/melgeek/mj61/rev1/rules.mk b/keyboards/melgeek/mj61/rev1/rules.mk
index 12c66f05a5..6f196e8849 100644
--- a/keyboards/melgeek/mj61/rev1/rules.mk
+++ b/keyboards/melgeek/mj61/rev1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/melgeek/mj63/rev1/rules.mk b/keyboards/melgeek/mj63/rev1/rules.mk
index d5fc76b8e7..c55beb7d1f 100644
--- a/keyboards/melgeek/mj63/rev1/rules.mk
+++ b/keyboards/melgeek/mj63/rev1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/melgeek/mj64/rev1/rules.mk b/keyboards/melgeek/mj64/rev1/rules.mk
index 01b8aca414..f50aefd049 100644
--- a/keyboards/melgeek/mj64/rev1/rules.mk
+++ b/keyboards/melgeek/mj64/rev1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/melgeek/mj64/rev2/rules.mk b/keyboards/melgeek/mj64/rev2/rules.mk
index 01b8aca414..f50aefd049 100644
--- a/keyboards/melgeek/mj64/rev2/rules.mk
+++ b/keyboards/melgeek/mj64/rev2/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/melgeek/mojo75/rev1/rules.mk b/keyboards/melgeek/mojo75/rev1/rules.mk
index 12c66f05a5..6f196e8849 100644
--- a/keyboards/melgeek/mojo75/rev1/rules.mk
+++ b/keyboards/melgeek/mojo75/rev1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/melgeek/z70ultra/rev1/rules.mk b/keyboards/melgeek/z70ultra/rev1/rules.mk
index dce0366f73..48087186d6 100644
--- a/keyboards/melgeek/z70ultra/rev1/rules.mk
+++ b/keyboards/melgeek/z70ultra/rev1/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/moonlander/rules.mk b/keyboards/moonlander/rules.mk
index 124061072f..561db849e7 100644
--- a/keyboards/moonlander/rules.mk
+++ b/keyboards/moonlander/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/nack/rules.mk b/keyboards/nack/rules.mk
index 8b803b3ae8..92103cab13 100644
--- a/keyboards/nack/rules.mk
+++ b/keyboards/nack/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/keyboards/nebula68/rules.mk b/keyboards/nebula68/rules.mk
index 399385b3e0..40e17f1b4f 100755
--- a/keyboards/nebula68/rules.mk
+++ b/keyboards/nebula68/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
diff --git a/keyboards/nk65/rules.mk b/keyboards/nk65/rules.mk
index f7db412a24..af41e71cbc 100755
--- a/keyboards/nk65/rules.mk
+++ b/keyboards/nk65/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
diff --git a/keyboards/nk87/rules.mk b/keyboards/nk87/rules.mk
index cdf4668ec1..e10ec5bc03 100755
--- a/keyboards/nk87/rules.mk
+++ b/keyboards/nk87/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk
index 18eada389f..716e5feda7 100644
--- a/keyboards/planck/ez/rules.mk
+++ b/keyboards/planck/ez/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
diff --git a/keyboards/planck/rev6/rules.mk b/keyboards/planck/rev6/rules.mk
index 02d6b89535..fc43bef571 100644
--- a/keyboards/planck/rev6/rules.mk
+++ b/keyboards/planck/rev6/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk
index a5fc16a2e5..e4d48e5b59 100644
--- a/keyboards/preonic/rev3/rules.mk
+++ b/keyboards/preonic/rev3/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
diff --git a/keyboards/rgbkb/pan/rev1/proton_c/rules.mk b/keyboards/rgbkb/pan/rev1/proton_c/rules.mk
index b17a3d0316..e7e9d992d2 100644
--- a/keyboards/rgbkb/pan/rev1/proton_c/rules.mk
+++ b/keyboards/rgbkb/pan/rev1/proton_c/rules.mk
@@ -1,2 +1,3 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C \ No newline at end of file
diff --git a/keyboards/yugo_m/model_m_101/rules.mk b/keyboards/yugo_m/model_m_101/rules.mk
index 6d1c531231..12a2e3dea6 100644
--- a/keyboards/yugo_m/model_m_101/rules.mk
+++ b/keyboards/yugo_m/model_m_101/rules.mk
@@ -1,5 +1,6 @@
# MCU name
MCU = STM32F303
+BOARD = QMK_PROTON_C
# Build Options
# change yes to no to disable
diff --git a/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h b/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h
new file mode 100644
index 0000000000..a73f0c0b47
--- /dev/null
+++ b/platforms/chibios/GENERIC_STM32_F042X6/configs/config.h
@@ -0,0 +1,20 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h
new file mode 100644
index 0000000000..a73f0c0b47
--- /dev/null
+++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/config.h
@@ -0,0 +1,20 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h
index 688350e9ce..d6b6aae4f1 100644
--- a/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h
+++ b/platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h
@@ -124,7 +124,7 @@
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
@@ -141,7 +141,7 @@
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h
index ac2d9a1eed..c6f5a8ac52 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h
+++ b/platforms/chibios/GENERIC_STM32_F303XC/configs/mcuconf.h
@@ -127,8 +127,8 @@
* DAC driver system settings.
*/
#define STM32_DAC_DUAL_MODE FALSE
-#define STM32_DAC_USE_DAC1_CH1 TRUE
-#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_USE_DAC1_CH1 FALSE
+#define STM32_DAC_USE_DAC1_CH2 FALSE
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
@@ -141,10 +141,10 @@
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
-#define STM32_GPT_USE_TIM6 TRUE
-#define STM32_GPT_USE_TIM7 TRUE
-#define STM32_GPT_USE_TIM8 TRUE
-#define STM32_GPT_USE_TIM15 TRUE
+#define STM32_GPT_USE_TIM6 FALSE
+#define STM32_GPT_USE_TIM7 FALSE
+#define STM32_GPT_USE_TIM8 FALSE
+#define STM32_GPT_USE_TIM15 FALSE
#define STM32_GPT_USE_TIM16 FALSE
#define STM32_GPT_USE_TIM17 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
@@ -158,7 +158,7 @@
/*
* I2C driver system settings.
*/
-#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
@@ -189,8 +189,8 @@
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
-#define STM32_PWM_USE_TIM3 TRUE
-#define STM32_PWM_USE_TIM4 TRUE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_USE_TIM15 FALSE
#define STM32_PWM_USE_TIM16 FALSE
@@ -213,7 +213,7 @@
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
-#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
@@ -227,7 +227,7 @@
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
-#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
diff --git a/platforms/chibios/QMK_PROTON_C/board/board.mk b/platforms/chibios/QMK_PROTON_C/board/board.mk
new file mode 100644
index 0000000000..f891e65247
--- /dev/null
+++ b/platforms/chibios/QMK_PROTON_C/board/board.mk
@@ -0,0 +1,9 @@
+# List of all the board related files.
+BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC += $(BOARDINC)
diff --git a/platforms/chibios/QMK_PROTON_C/configs/board.h b/platforms/chibios/QMK_PROTON_C/configs/board.h
new file mode 100644
index 0000000000..97159964d0
--- /dev/null
+++ b/platforms/chibios/QMK_PROTON_C/configs/board.h
@@ -0,0 +1,37 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next "board.h"
+
+#undef STM32_HSE_BYPASS
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+#define usb_lld_connect_bus(usbp) \
+ do { \
+ palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)); \
+ } while (0)
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+#define usb_lld_disconnect_bus(usbp) \
+ do { \
+ palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL); \
+ palClearPad(GPIOA, GPIOA_USB_DP); \
+ } while (0)
diff --git a/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h b/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h
new file mode 100644
index 0000000000..3b0e9d20a6
--- /dev/null
+++ b/platforms/chibios/QMK_PROTON_C/configs/bootloader_defs.h
@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
diff --git a/platforms/chibios/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/QMK_PROTON_C/configs/chconf.h
new file mode 100644
index 0000000000..aac3303705
--- /dev/null
+++ b/platforms/chibios/QMK_PROTON_C/configs/chconf.h
@@ -0,0 +1,714 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file rt/templates/chconf.h
+ * @brief Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ * contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+#define _CHIBIOS_RT_CONF_VER_6_0_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_ST_RESOLUTION)
+#define CH_CFG_ST_RESOLUTION 32
+#endif
+
+/**
+ * @brief System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ * setting also defines the system tick time unit.
+ */
+#if !defined(CH_CFG_ST_FREQUENCY)
+#define CH_CFG_ST_FREQUENCY 100000
+#endif
+
+/**
+ * @brief Time intervals data size.
+ * @note Allowed values are 16, 32 or 64 bits.
+ */
+#if !defined(CH_CFG_INTERVALS_SIZE)
+#define CH_CFG_INTERVALS_SIZE 32
+#endif
+
+/**
+ * @brief Time types data size.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#if !defined(CH_CFG_TIME_TYPES_SIZE)
+#define CH_CFG_TIME_TYPES_SIZE 32
+#endif
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#if !defined(CH_CFG_ST_TIMEDELTA)
+#define CH_CFG_ST_TIMEDELTA 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ * threads before preemption occurs. Setting this value to zero
+ * disables the preemption for threads with equal priority and the
+ * round robin becomes cooperative. Note that higher priority
+ * threads can still preempt, the kernel is always preemptive.
+ * @note Disabling the round robin preemption makes the kernel more compact
+ * and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
+ */
+#if !defined(CH_CFG_TIME_QUANTUM)
+#define CH_CFG_TIME_QUANTUM 0
+#endif
+
+/**
+ * @brief Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ * then the whole available RAM is used. The core memory is made
+ * available to the heap allocator and/or can be used directly through
+ * the simplified core memory allocator.
+ *
+ * @note In order to let the OS manage the whole RAM the linker script must
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
+ */
+#if !defined(CH_CFG_MEMCORE_SIZE)
+#define CH_CFG_MEMCORE_SIZE 0
+#endif
+
+/**
+ * @brief Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop.
+ */
+#if !defined(CH_CFG_NO_IDLE_THREAD)
+#define CH_CFG_NO_IDLE_THREAD FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ * is used when two possible implementations exist.
+ *
+ * @note This is not related to the compiler optimization options.
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_OPTIMIZE_SPEED)
+#define CH_CFG_OPTIMIZE_SPEED TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_TM)
+#define CH_CFG_USE_TM TRUE
+#endif
+
+/**
+ * @brief Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_REGISTRY)
+#define CH_CFG_USE_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_WAITEXIT)
+#define CH_CFG_USE_WAITEXIT TRUE
+#endif
+
+/**
+ * @brief Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES)
+#define CH_CFG_USE_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ * priority rather than in FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
+#endif
+
+/**
+ * @brief Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MUTEXES)
+#define CH_CFG_USE_MUTEXES TRUE
+#endif
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
+#endif
+
+/**
+ * @brief Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#if !defined(CH_CFG_USE_CONDVARS)
+#define CH_CFG_USE_CONDVARS TRUE
+#endif
+
+/**
+ * @brief Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ * specification are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
+ */
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_EVENTS)
+#define CH_CFG_USE_EVENTS TRUE
+#endif
+
+/**
+ * @brief Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ * are included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_EVENTS.
+ */
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MESSAGES)
+#define CH_CFG_USE_MESSAGES TRUE
+#endif
+
+/**
+ * @brief Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ * FIFO order.
+ *
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
+ */
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
+#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
+#endif
+
+/**
+ * @brief Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ * included in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#if !defined(CH_CFG_USE_MAILBOXES)
+#define CH_CFG_USE_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMCORE)
+#define CH_CFG_USE_MEMCORE TRUE
+#endif
+
+/**
+ * @brief Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
+ * @note Mutexes are recommended.
+ */
+#if !defined(CH_CFG_USE_HEAP)
+#define CH_CFG_USE_HEAP TRUE
+#endif
+
+/**
+ * @brief Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_MEMPOOLS)
+#define CH_CFG_USE_MEMPOOLS TRUE
+#endif
+
+/**
+ * @brief Objects FIFOs APIs.
+ * @details If enabled then the objects FIFOs APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_OBJ_FIFOS)
+#define CH_CFG_USE_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Pipes APIs.
+ * @details If enabled then the pipes APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#if !defined(CH_CFG_USE_PIPES)
+#define CH_CFG_USE_PIPES TRUE
+#endif
+
+/**
+ * @brief Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ * in the kernel.
+ *
+ * @note The default is @p TRUE.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#if !defined(CH_CFG_USE_DYNAMIC)
+#define CH_CFG_USE_DYNAMIC TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Objects factory options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Objects Factory APIs.
+ * @details If enabled then the objects factory APIs are included in the
+ * kernel.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_CFG_USE_FACTORY)
+#define CH_CFG_USE_FACTORY TRUE
+#endif
+
+/**
+ * @brief Maximum length for object names.
+ * @details If the specified length is zero then the name is stored by
+ * pointer but this could have unintended side effects.
+ */
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
+#endif
+
+/**
+ * @brief Enables the registry of generic objects.
+ */
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#endif
+
+/**
+ * @brief Enables factory for generic buffers.
+ */
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
+#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#endif
+
+/**
+ * @brief Enables factory for semaphores.
+ */
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)
+#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#endif
+
+/**
+ * @brief Enables factory for mailboxes.
+ */
+#if !defined(CH_CFG_FACTORY_MAILBOXES)
+#define CH_CFG_FACTORY_MAILBOXES TRUE
+#endif
+
+/**
+ * @brief Enables factory for objects FIFOs.
+ */
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
+#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#endif
+
+/**
+ * @brief Enables factory for Pipes.
+ */
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
+#define CH_CFG_FACTORY_PIPES TRUE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_STATISTICS)
+#define CH_DBG_STATISTICS FALSE
+#endif
+
+/**
+ * @brief Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ * at runtime.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
+#endif
+
+/**
+ * @brief Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ * parameters are activated.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_CHECKS)
+#define CH_DBG_ENABLE_CHECKS FALSE
+#endif
+
+/**
+ * @brief Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ * activated. This includes consistency checks inside the kernel,
+ * runtime anomalies and port-defined checks.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_ENABLE_ASSERTS)
+#define CH_DBG_ENABLE_ASSERTS FALSE
+#endif
+
+/**
+ * @brief Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_MASK)
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
+#endif
+
+/**
+ * @brief Trace buffer entries.
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
+#define CH_DBG_TRACE_BUFFER_SIZE 128
+#endif
+
+/**
+ * @brief Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note The default is @p FALSE.
+ * @note The stack check is performed in a architecture/port dependent way.
+ * It may not be implemented or some ports.
+ * @note The default failure mode is to halt the system with the global
+ * @p panic_msg variable set to @p NULL.
+ */
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)
+#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#endif
+
+/**
+ * @brief Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ * value when a thread is created. This can be useful for the
+ * runtime measurement of the used stack.
+ *
+ * @note The default is @p FALSE.
+ */
+#if !defined(CH_DBG_FILL_THREADS)
+#define CH_DBG_FILL_THREADS FALSE
+#endif
+
+/**
+ * @brief Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ * counts the system ticks occurred while executing the thread.
+ *
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
+ */
+#if !defined(CH_DBG_THREADS_PROFILING)
+#define CH_DBG_THREADS_PROFILING FALSE
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief System structure extension.
+ * @details User fields added to the end of the @p ch_system_t structure.
+ */
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief System initialization hook.
+ * @details User initialization code added to the @p chSysInit() function
+ * just before interrupts are enabled globally.
+ */
+#define CH_CFG_SYSTEM_INIT_HOOK() { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS \
+ /* Add threads custom fields here.*/
+
+/**
+ * @brief Threads initialization hook.
+ * @details User initialization code added to the @p _thread_init() function.
+ *
+ * @note It is invoked from within @p _thread_init() and implicitly from all
+ * the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
+ /* Add threads initialization code here.*/ \
+}
+
+/**
+ * @brief Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
+ /* Add threads finalization code here.*/ \
+}
+
+/**
+ * @brief Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+ /* Context switch code here.*/ \
+}
+
+/**
+ * @brief ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
+ /* IRQ prologue code here.*/ \
+}
+
+/**
+ * @brief ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
+ /* IRQ epilogue code here.*/ \
+}
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+ /* Idle-enter code here.*/ \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+ /* Idle-leave code here.*/ \
+}
+
+/**
+ * @brief Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() { \
+ /* Idle loop code here.*/ \
+}
+
+/**
+ * @brief System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ * after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
+ /* System tick event code here.*/ \
+}
+
+/**
+ * @brief System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ * the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
+ /* System halt code here.*/ \
+}
+
+/**
+ * @brief Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ * trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) { \
+ /* Trace code here.*/ \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h). */
+/*===========================================================================*/
+
+#endif /* CHCONF_H */
+
+/** @} */
diff --git a/platforms/chibios/QMK_PROTON_C/configs/config.h b/platforms/chibios/QMK_PROTON_C/configs/config.h
new file mode 100644
index 0000000000..a73f0c0b47
--- /dev/null
+++ b/platforms/chibios/QMK_PROTON_C/configs/config.h
@@ -0,0 +1,20 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
+# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
+#endif
diff --git a/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h b/platforms/chibios/QMK_PROTON_C/configs/halconf.h
index a8db392aaa..a9f2cf77b4 100644
--- a/platforms/chibios/BLACKPILL_STM32_F411/configs/halconf.h
+++ b/platforms/chibios/QMK_PROTON_C/configs/halconf.h
@@ -31,7 +31,7 @@
#define _CHIBIOS_HAL_CONF_
#define _CHIBIOS_HAL_CONF_VER_7_0_
-#include "mcuconf.h"
+#include <mcuconf.h>
/**
* @brief Enables the PAL subsystem.
@@ -65,21 +65,21 @@
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
+#define HAL_USE_DAC TRUE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
+#define HAL_USE_GPT TRUE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
+#define HAL_USE_I2C TRUE
#endif
/**
@@ -114,7 +114,7 @@
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
+#define HAL_USE_PWM TRUE
#endif
/**
@@ -142,7 +142,7 @@
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
+#define HAL_USE_SERIAL_USB TRUE
#endif
/**
@@ -156,7 +156,7 @@
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
+#define HAL_USE_SPI TRUE
#endif
/**
@@ -203,7 +203,7 @@
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS FALSE
+#define PAL_USE_CALLBACKS TRUE
#endif
/**
@@ -211,7 +211,7 @@
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT FALSE
+#define PAL_USE_WAIT TRUE
#endif
/*===========================================================================*/
@@ -420,7 +420,7 @@
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
+#define SERIAL_USB_BUFFERS_SIZE 1
#endif
/**
diff --git a/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h
new file mode 100644
index 0000000000..ac2d9a1eed
--- /dev/null
+++ b/platforms/chibios/QMK_PROTON_C/configs/mcuconf.h
@@ -0,0 +1,273 @@
+/*
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+#define STM32F303_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 9
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV2
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_USART2SW STM32_USART2SW_PCLK
+#define STM32_USART3SW STM32_USART3SW_PCLK
+#define STM32_UART4SW STM32_UART4SW_PCLK
+#define STM32_UART5SW STM32_UART5SW_PCLK
+#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED TRUE
+#define STM32_USBPRE STM32_USBPRE_DIV1P5
+
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY 6
+#define STM32_IRQ_EXTI1_PRIORITY 6
+#define STM32_IRQ_EXTI2_PRIORITY 6
+#define STM32_IRQ_EXTI3_PRIORITY 6
+#define STM32_IRQ_EXTI4_PRIORITY 6
+#define STM32_IRQ_EXTI5_9_PRIORITY 6
+#define STM32_IRQ_EXTI10_15_PRIORITY 6
+#define STM32_IRQ_EXTI16_PRIORITY 6
+#define STM32_IRQ_EXTI17_PRIORITY 15
+#define STM32_IRQ_EXTI18_PRIORITY 6
+#define STM32_IRQ_EXTI19_PRIORITY 15
+#define STM32_IRQ_EXTI20_PRIORITY 15
+#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
+#define STM32_IRQ_EXTI30_32_PRIORITY 6
+#define STM32_IRQ_EXTI33_PRIORITY 6
+#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
+#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
+#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
+#define STM32_IRQ_TIM1_CC_PRIORITY 7
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE FALSE
+#define STM32_ADC_COMPACT_SAMPLES FALSE
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_USE_ADC2 FALSE
+#define STM32_ADC_USE_ADC3 FALSE
+#define STM32_ADC_USE_ADC4 FALSE
+#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_ADC2_DMA_PRIORITY 2
+#define STM32_ADC_ADC3_DMA_PRIORITY 2
+#define STM32_ADC_ADC4_DMA_PRIORITY 2
+#define STM32_ADC_ADC12_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_IRQ_PRIORITY 5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
+#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1 FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE FALSE
+#define STM32_DAC_USE_DAC1_CH1 TRUE
+#define STM32_DAC_USE_DAC1_CH2 TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM4 FALSE
+#define STM32_GPT_USE_TIM6 TRUE
+#define STM32_GPT_USE_TIM7 TRUE
+#define STM32_GPT_USE_TIM8 TRUE
+#define STM32_GPT_USE_TIM15 TRUE
+#define STM32_GPT_USE_TIM16 FALSE
+#define STM32_GPT_USE_TIM17 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 7
+#define STM32_GPT_TIM2_IRQ_PRIORITY 7
+#define STM32_GPT_TIM3_IRQ_PRIORITY 7
+#define STM32_GPT_TIM4_IRQ_PRIORITY 7
+#define STM32_GPT_TIM6_IRQ_PRIORITY 7
+#define STM32_GPT_TIM7_IRQ_PRIORITY 7
+#define STM32_GPT_TIM8_IRQ_PRIORITY 7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 TRUE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_USE_TIM4 FALSE
+#define STM32_ICU_USE_TIM8 FALSE
+#define STM32_ICU_USE_TIM15 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 7
+#define STM32_ICU_TIM2_IRQ_PRIORITY 7
+#define STM32_ICU_TIM3_IRQ_PRIORITY 7
+#define STM32_ICU_TIM4_IRQ_PRIORITY 7
+#define STM32_ICU_TIM8_IRQ_PRIORITY 7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 TRUE
+#define STM32_PWM_USE_TIM4 TRUE
+#define STM32_PWM_USE_TIM8 FALSE
+#define STM32_PWM_USE_TIM15 FALSE
+#define STM32_PWM_USE_TIM16 FALSE
+#define STM32_PWM_USE_TIM17 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 7
+#define STM32_PWM_TIM2_IRQ_PRIORITY 7
+#define STM32_PWM_TIM3_IRQ_PRIORITY 7
+#define STM32_PWM_TIM4_IRQ_PRIORITY 7
+#define STM32_PWM_TIM8_IRQ_PRIORITY 7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_PRESA_VALUE 32
+#define STM32_RTC_PRESS_VALUE 1024
+#define STM32_RTC_CR_INIT 0
+#define STM32_RTC_TAMPCR_INIT 0
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 TRUE
+#define STM32_SERIAL_USE_USART3 FALSE
+#define STM32_SERIAL_USE_UART4 FALSE
+#define STM32_SERIAL_USE_UART5 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 12
+#define STM32_SERIAL_USART2_PRIORITY 12
+#define STM32_SERIAL_USART3_PRIORITY 12
+#define STM32_SERIAL_UART4_PRIORITY 12
+#define STM32_SERIAL_UART5_PRIORITY 12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 TRUE
+#define STM32_SPI_USE_SPI3 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI3_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 10
+#define STM32_SPI_SPI2_IRQ_PRIORITY 10
+#define STM32_SPI_SPI3_IRQ_PRIORITY 10
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USE_USART3 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 12
+#define STM32_UART_USART2_IRQ_PRIORITY 12
+#define STM32_UART_USART3_IRQ_PRIORITY 12
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_USART3_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG FALSE
+
+#endif /* MCUCONF_H */
diff --git a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk
index 23907c810a..3fa73a96e0 100644
--- a/platforms/chibios/GENERIC_STM32_F303XC/configs/proton_c.mk
+++ b/platforms/chibios/QMK_PROTON_C/convert_to_proton_c.mk
@@ -1,9 +1,12 @@
# Proton C MCU settings for converting AVR projects
-MCU = STM32F303
+TARGET := $(TARGET)_proton_c
+MCU := STM32F303
+BOARD := QMK_PROTON_C
+OPT_DEFS += -DCONVERT_TO_PROTON_C
# These are defaults based on what has been implemented for ARM boards
AUDIO_ENABLE = yes
WS2812_DRIVER = bitbang
# Force task driven PWM until ARM can provide automatic configuration
-BACKLIGHT_DRIVER = software
+BACKLIGHT_DRIVER = software \ No newline at end of file
diff --git a/platforms/chibios/common/configs/chconf.h b/platforms/chibios/common/configs/chconf.h
index aac3303705..2fad3f769b 100644
--- a/platforms/chibios/common/configs/chconf.h
+++ b/platforms/chibios/common/configs/chconf.h
@@ -308,7 +308,7 @@
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
#endif
/**
@@ -331,7 +331,7 @@
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE TRUE
+#define CH_CFG_USE_MEMCORE FALSE
#endif
/**
@@ -411,7 +411,7 @@
* @note The default is @p FALSE.
*/
#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY TRUE
+#define CH_CFG_USE_FACTORY FALSE
#endif
/**
@@ -427,42 +427,42 @@
* @brief Enables the registry of generic objects.
*/
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE
#endif
/**
* @brief Enables factory for generic buffers.
*/
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
+#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE
#endif
/**
* @brief Enables factory for semaphores.
*/
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
+#define CH_CFG_FACTORY_SEMAPHORES FALSE
#endif
/**
* @brief Enables factory for mailboxes.
*/
#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES TRUE
+#define CH_CFG_FACTORY_MAILBOXES FALSE
#endif
/**
* @brief Enables factory for objects FIFOs.
*/
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
+#define CH_CFG_FACTORY_OBJ_FIFOS FALSE
#endif
/**
* @brief Enables factory for Pipes.
*/
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES TRUE
+#define CH_CFG_FACTORY_PIPES FALSE
#endif
/** @} */
@@ -547,7 +547,7 @@
* @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
#endif
/**
diff --git a/platforms/chibios/common/configs/halconf.h b/platforms/chibios/common/configs/halconf.h
index 6b48e289f9..880e7f97aa 100644
--- a/platforms/chibios/common/configs/halconf.h
+++ b/platforms/chibios/common/configs/halconf.h
@@ -31,7 +31,7 @@
#define _CHIBIOS_HAL_CONF_
#define _CHIBIOS_HAL_CONF_VER_7_0_
-#include "mcuconf.h"
+#include <mcuconf.h>
/**
* @brief Enables the PAL subsystem.
@@ -65,21 +65,21 @@
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC TRUE
+#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
+#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C TRUE
+#define HAL_USE_I2C FALSE
#endif
/**
@@ -114,7 +114,7 @@
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
+#define HAL_USE_PWM FALSE
#endif
/**
@@ -142,7 +142,7 @@
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB TRUE
+#define HAL_USE_SERIAL_USB FALSE
#endif
/**
@@ -156,7 +156,7 @@
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI TRUE
+#define HAL_USE_SPI FALSE
#endif
/**
@@ -203,7 +203,7 @@
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS TRUE
+#define PAL_USE_CALLBACKS FALSE
#endif
/**
@@ -211,7 +211,7 @@
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT TRUE
+#define PAL_USE_WAIT FALSE
#endif
/*===========================================================================*/
diff --git a/quantum/quantum.h b/quantum/quantum.h
index cb0af306ac..59c3dd4904 100644
--- a/quantum/quantum.h
+++ b/quantum/quantum.h
@@ -53,6 +53,7 @@
#include "eeconfig.h"
#include "bootloader.h"
#include "timer.h"
+#include "sync_timer.h"
#include "config_common.h"
#include "led.h"
#include "action_util.h"
diff --git a/quantum/rgb_matrix.c b/quantum/rgb_matrix.c
index f239bd582f..a3dd51f7b3 100644
--- a/quantum/rgb_matrix.c
+++ b/quantum/rgb_matrix.c
@@ -266,9 +266,9 @@ static bool rgb_matrix_none(effect_params_t *params) {
static void rgb_task_timers(void) {
#if defined(RGB_MATRIX_KEYREACTIVE_ENABLED) || RGB_DISABLE_TIMEOUT > 0
- uint32_t deltaTime = timer_elapsed32(rgb_timer_buffer);
+ uint32_t deltaTime = sync_timer_elapsed32(rgb_timer_buffer);
#endif // defined(RGB_MATRIX_KEYREACTIVE_ENABLED) || RGB_DISABLE_TIMEOUT > 0
- rgb_timer_buffer = timer_read32();
+ rgb_timer_buffer = sync_timer_read32();
// Update double buffer timers
#if RGB_DISABLE_TIMEOUT > 0
@@ -296,7 +296,7 @@ static void rgb_task_timers(void) {
static void rgb_task_sync(void) {
// next task
- if (timer_elapsed32(g_rgb_timer) >= RGB_MATRIX_LED_FLUSH_LIMIT) rgb_task_state = STARTING;
+ if (sync_timer_elapsed32(g_rgb_timer) >= RGB_MATRIX_LED_FLUSH_LIMIT) rgb_task_state = STARTING;
}
static void rgb_task_start(void) {
diff --git a/quantum/rgblight.c b/quantum/rgblight.c
index 7f9e330d37..65308572db 100644
--- a/quantum/rgblight.c
+++ b/quantum/rgblight.c
@@ -29,7 +29,7 @@
#endif
#include "wait.h"
#include "progmem.h"
-#include "timer.h"
+#include "sync_timer.h"
#include "rgblight.h"
#include "color.h"
#include "debug.h"
@@ -684,18 +684,16 @@ static void rgblight_layers_write(void) {
# ifdef RGBLIGHT_LAYER_BLINK
rgblight_layer_mask_t _blinked_layer_mask = 0;
-uint16_t _blink_duration = 0;
static uint16_t _blink_timer;
void rgblight_blink_layer(uint8_t layer, uint16_t duration_ms) {
rgblight_set_layer_state(layer, true);
_blinked_layer_mask |= 1 << layer;
- _blink_timer = timer_read();
- _blink_duration = duration_ms;
+ _blink_timer = sync_timer_read() + duration_ms;
}
void rgblight_unblink_layers(void) {
- if (_blinked_layer_mask != 0 && timer_elapsed(_blink_timer) > _blink_duration) {
+ if (_blinked_layer_mask != 0 && timer_expired(sync_timer_read(), _blink_timer)) {
for (uint8_t layer = 0; layer < RGBLIGHT_MAX_LAYERS; layer++) {
if ((_blinked_layer_mask & 1 << layer) != 0) {
rgblight_set_layer_state(layer, false);
@@ -799,7 +797,7 @@ void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom) {
animation_status.restart = true;
}
# endif /* RGBLIGHT_SPLIT_NO_ANIMATION_SYNC */
-# endif /* RGBLIGHT_USE_TIMER */
+# endif /* RGBLIGHT_USE_TIMER */
}
#endif /* RGBLIGHT_SPLIT */
@@ -832,7 +830,7 @@ void rgblight_timer_enable(void) {
if (!is_static_effect(rgblight_config.mode)) {
rgblight_status.timer_enabled = true;
}
- animation_status.last_timer = timer_read();
+ animation_status.last_timer = sync_timer_read();
RGBLIGHT_SPLIT_SET_CHANGE_TIMER_ENABLE;
dprintf("rgblight timer enabled.\n");
}
@@ -941,18 +939,19 @@ void rgblight_task(void) {
# endif
if (animation_status.restart) {
animation_status.restart = false;
- animation_status.last_timer = timer_read() - interval_time - 1;
+ animation_status.last_timer = sync_timer_read();
animation_status.pos16 = 0; // restart signal to local each effect
}
- if (timer_elapsed(animation_status.last_timer) >= interval_time) {
+ uint16_t now = sync_timer_read();
+ if (timer_expired(now, animation_status.last_timer)) {
# if defined(RGBLIGHT_SPLIT) && !defined(RGBLIGHT_SPLIT_NO_ANIMATION_SYNC)
static uint16_t report_last_timer = 0;
static bool tick_flag = false;
uint16_t oldpos16;
if (tick_flag) {
tick_flag = false;
- if (timer_elapsed(report_last_timer) >= 30000) {
- report_last_timer = timer_read();
+ if (timer_expired(now, report_last_timer)) {
+ report_last_timer += 30000;
dprintf("rgblight animation tick report to slave\n");
RGBLIGHT_SPLIT_ANIMATION_TICK;
}
diff --git a/quantum/split_common/transport.c b/quantum/split_common/transport.c
index 467ff81a97..6856b60558 100644
--- a/quantum/split_common/transport.c
+++ b/quantum/split_common/transport.c
@@ -6,6 +6,7 @@
#include "quantum.h"
#define ROWS_PER_HAND (MATRIX_ROWS / 2)
+#define SYNC_TIMER_OFFSET 2
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
@@ -27,6 +28,9 @@ static pin_t encoders_pad[] = ENCODERS_PAD_A;
# include "i2c_slave.h"
typedef struct _I2C_slave_buffer_t {
+# ifndef DISABLE_SYNC_TIMER
+ uint32_t sync_timer;
+# endif
matrix_row_t smatrix[ROWS_PER_HAND];
uint8_t backlight_level;
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
@@ -44,6 +48,7 @@ static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_re
# define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level)
# define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync)
+# define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer)
# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix)
# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state)
# define I2C_WPM_START offsetof(I2C_slave_buffer_t, current_wpm)
@@ -91,10 +96,18 @@ bool transport_master(matrix_row_t matrix[]) {
}
}
# endif
+
+# ifndef DISABLE_SYNC_TIMER
+ i2c_buffer->sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET;
+ i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_SYNC_TIME_START, (void *)&i2c_buffer->sync_timer, sizeof(i2c_buffer->sync_timer), TIMEOUT);
+# endif
return true;
}
void transport_slave(matrix_row_t matrix[]) {
+# ifndef DISABLE_SYNC_TIMER
+ sync_timer_update(i2c_buffer->sync_timer);
+# endif
// Copy matrix to I2C buffer
memcpy((void *)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix));
@@ -133,12 +146,15 @@ typedef struct _Serial_s2m_buffer_t {
matrix_row_t smatrix[ROWS_PER_HAND];
# ifdef ENCODER_ENABLE
- uint8_t encoder_state[NUMBER_OF_ENCODERS];
+ uint8_t encoder_state[NUMBER_OF_ENCODERS];
# endif
} Serial_s2m_buffer_t;
typedef struct _Serial_m2s_buffer_t {
+# ifndef DISABLE_SYNC_TIMER
+ uint32_t sync_timer;
+# endif
# ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
# endif
@@ -251,11 +267,19 @@ bool transport_master(matrix_row_t matrix[]) {
// Write wpm to slave
serial_m2s_buffer.current_wpm = get_current_wpm();
# endif
+
+# ifndef DISABLE_SYNC_TIMER
+ serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET;
+# endif
return true;
}
void transport_slave(matrix_row_t matrix[]) {
transport_rgblight_slave();
+# ifndef DISABLE_SYNC_TIMER
+ sync_timer_update(serial_m2s_buffer.sync_timer);
+# endif
+
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_s2m_buffer.smatrix[i] = matrix[i];
diff --git a/readme.md b/readme.md
index 6092f209be..6321681a92 100644
--- a/readme.md
+++ b/readme.md
@@ -7,6 +7,12 @@
[![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
[![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
+# THIS IS THE DEVELOP BRANCH
+
+Warning- This is the `develop` branch of QMK Firmware. You may encounter broken code here. Please see [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) for more information.
+
+# Original readme continues
+
This is a keyboard firmware based on the [tmk\_keyboard firmware](https://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](https://olkb.com), the [ErgoDox EZ](https://ergodox-ez.com) keyboard, and the [Clueboard product line](https://clueboard.co).
## Documentation
diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk
index e53edccee2..ceed2a7b42 100644
--- a/tmk_core/chibios.mk
+++ b/tmk_core/chibios.mk
@@ -71,6 +71,9 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk)","
BOARD_PATH = $(TOP_DIR)/platforms/chibios/$(BOARD)
BOARD_MK += $(TOP_DIR)/platforms/chibios/$(BOARD)/board/board.mk
KEYBOARD_PATHS += $(BOARD_PATH)/configs
+ ifneq ("$(wildcard $(BOARD_PATH)/rules.mk)","")
+ include $(BOARD_PATH)/rules.mk
+ endif
endif
ifeq ("$(wildcard $(BOARD_MK))","")
diff --git a/tmk_core/common.mk b/tmk_core/common.mk
index fdf2aa0972..05839824c0 100644
--- a/tmk_core/common.mk
+++ b/tmk_core/common.mk
@@ -18,6 +18,7 @@ TMK_COMMON_SRC += $(COMMON_DIR)/host.c \
$(COMMON_DIR)/report.c \
$(PLATFORM_COMMON_DIR)/suspend.c \
$(PLATFORM_COMMON_DIR)/timer.c \
+ $(COMMON_DIR)/sync_timer.c \
$(PLATFORM_COMMON_DIR)/bootloader.c \
ifeq ($(PLATFORM),AVR)
diff --git a/tmk_core/common/keyboard.c b/tmk_core/common/keyboard.c
index 8c7bdc8b55..a1fbc01da6 100644
--- a/tmk_core/common/keyboard.c
+++ b/tmk_core/common/keyboard.c
@@ -23,6 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "led.h"
#include "keycode.h"
#include "timer.h"
+#include "sync_timer.h"
#include "print.h"
#include "debug.h"
#include "command.h"
@@ -255,6 +256,7 @@ __attribute__((weak)) void housekeeping_task_user(void) {}
*/
void keyboard_init(void) {
timer_init();
+ sync_timer_init();
matrix_init();
#ifdef VIA_ENABLE
via_init();
diff --git a/tmk_core/common/sync_timer.c b/tmk_core/common/sync_timer.c
new file mode 100644
index 0000000000..de24b463b6
--- /dev/null
+++ b/tmk_core/common/sync_timer.c
@@ -0,0 +1,58 @@
+/*
+Copyright (C) 2020 Ryan Caltabiano <https://github.com/XScorpion2>
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+of the Software, and to permit persons to whom the Software is furnished to do
+so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+If you happen to meet one of the copyright holders in a bar you are obligated
+to buy them one pint of beer.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+
+#include "sync_timer.h"
+#include "keyboard.h"
+
+#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER)
+volatile int32_t sync_timer_ms;
+
+void sync_timer_init(void) { sync_timer_ms = 0; }
+
+void sync_timer_update(uint32_t time) {
+ if (is_keyboard_master()) return;
+ sync_timer_ms = time - timer_read32();
+}
+
+uint16_t sync_timer_read(void) {
+ if (is_keyboard_master()) return timer_read();
+ return sync_timer_read32();
+}
+
+uint32_t sync_timer_read32(void) {
+ if (is_keyboard_master()) return timer_read32();
+ return sync_timer_ms + timer_read32();
+}
+
+uint16_t sync_timer_elapsed(uint16_t last) {
+ if (is_keyboard_master()) return timer_elapsed(last);
+ return TIMER_DIFF_16(sync_timer_read(), last);
+}
+
+uint32_t sync_timer_elapsed32(uint32_t last) {
+ if (is_keyboard_master()) return timer_elapsed32(last);
+ return TIMER_DIFF_32(sync_timer_read32(), last);
+}
+#endif
diff --git a/tmk_core/common/sync_timer.h b/tmk_core/common/sync_timer.h
new file mode 100644
index 0000000000..9ddef45bb2
--- /dev/null
+++ b/tmk_core/common/sync_timer.h
@@ -0,0 +1,54 @@
+/*
+Copyright (C) 2020 Ryan Caltabiano <https://github.com/XScorpion2>
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+of the Software, and to permit persons to whom the Software is furnished to do
+so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+If you happen to meet one of the copyright holders in a bar you are obligated
+to buy them one pint of beer.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+*/
+
+#pragma once
+
+#include <stdint.h>
+#include "timer.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER)
+void sync_timer_init(void);
+void sync_timer_update(uint32_t time);
+uint16_t sync_timer_read(void);
+uint32_t sync_timer_read32(void);
+uint16_t sync_timer_elapsed(uint16_t last);
+uint32_t sync_timer_elapsed32(uint32_t last);
+#else
+# define sync_timer_init()
+# define sync_timer_clear()
+# define sync_timer_update(t)
+# define sync_timer_read() timer_read()
+# define sync_timer_read32() timer_read32()
+# define sync_timer_elapsed(t) timer_elapsed(t)
+# define sync_timer_elapsed32(t) timer_elapsed32(t)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/util/chibios-upgrader.sh b/util/chibios_conf_updater.sh
index ebc12abe7d..70bd80da1e 100755
--- a/util/chibios-upgrader.sh
+++ b/util/chibios_conf_updater.sh
@@ -51,7 +51,7 @@ revert_chibi_files() {
for file in $(find_chibi_files "$search_path" -name chconf.h -or -name halconf.h -or -name mcuconf.h -or -name board.c -or -name board.h -or -name board.mk -or -name board.chcfg) ; do
pushd "$search_path" >/dev/null 2>&1
local relpath=$(realpath --relative-to="$search_path" "$file")
- git checkout upstream/master -- "$relpath" || git checkout origin/master -- "$relpath" || true
+ git checkout upstream/develop -- "$relpath" || git checkout origin/develop -- "$relpath" || true
popd >/dev/null 2>&1
done
}
@@ -132,6 +132,14 @@ upgrade_chconf_files() {
upgrade_halconf_files() {
upgrade_conf_files_generic halconf.h update_halconf.sh
+
+ OIFS=$IFS
+ IFS=$'\n'
+ for file in $(find_chibi_files "$qmk_firmware_dir" -name halconf.h) ; do
+ echo $file
+ sed -i 's@#include "mcuconf.h"@#include <mcuconf.h>@g' "$file"
+ done
+ IFS=$OIFS
}
upgrade_mcuconf_files() {