summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboard/atomic/Makefile43
-rw-r--r--keyboard/atomic/Makefile.pjrc2
-rw-r--r--keyboard/atomic/README 2.md141
-rw-r--r--keyboard/atomic/config.h4
-rw-r--r--keyboard/atomic/keymap_common.h109
-rw-r--r--keyboard/atomic/keymap_plain.c46
-rw-r--r--keyboard/atomic/keymap_ricky.c15
-rw-r--r--keyboard/atomic/keymap_vlad.c14
-rw-r--r--keyboard/atomic/led.c13
-rw-r--r--keyboard/atomic/matrix.c9
-rw-r--r--keyboard/planck/Makefile18
-rw-r--r--keyboard/planck/analog.c53
-rw-r--r--keyboard/planck/analog.h36
-rw-r--r--keyboard/planck/beeps.c238
-rw-r--r--keyboard/planck/beeps.h9
-rw-r--r--keyboard/planck/common_keymaps/keymap_paul.c49
-rw-r--r--keyboard/planck/extended_keymap_common.c4
-rw-r--r--keyboard/planck/extended_keymap_common.h4
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_david.c76
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_default.c24
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_dzobert.c49
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_kyle.c49
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_leo.c46
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_max.c49
-rw-r--r--keyboard/planck/extended_keymaps/extended_keymap_numpad.c26
-rwxr-xr-xkeyboard/planck/flash-pcb.sh3
-rw-r--r--keyboard/planck/keymap_common.h2
-rw-r--r--keyboard/planck/matrix_center.c71
-rw-r--r--keyboard/planck/matrix_handwired.c2
-rw-r--r--keyboard/planck/matrix_pcb.c5
30 files changed, 914 insertions, 295 deletions
diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile
index 0d5baa9fa1..ed1d331766 100644
--- a/keyboard/atomic/Makefile
+++ b/keyboard/atomic/Makefile
@@ -39,7 +39,7 @@
#----------------------------------------------------------------------------
# Target file name (without extension).
-TARGET = atomic_lufa
+TARGET = planck_lufa
# Directory common source filess exist
TOP_DIR = ../..
@@ -47,20 +47,47 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
-# project specific files
-SRC = keymap_common.c \
- matrix.c \
+# # project specific files
+ifdef COMMON
+
+ SRC = keymap_common.c \
led.c \
backlight.c
ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
+ SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
else
- SRC := keymap_vlad.c $(SRC)
+ SRC := common_keymaps/keymap_jack.c $(SRC)
endif
-CONFIG_H = config.h
+ifdef MATRIX
+ SRC := matrix_$(MATRIX).c $(SRC)
+else
+ SRC := matrix_pcb.c $(SRC)
+endif
+
+else
+
+SRC = extended_keymap_common.c \
+ analog.c \
+ led.c \
+ backlight.c
+
+ifdef KEYMAP
+ SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := extended_keymaps/extended_keymap_default.c $(SRC)
+endif
+
+ifdef MATRIX
+ SRC := matrix_$(MATRIX).c $(SRC)
+else
+ SRC := matrix_pcb.c $(SRC)
+endif
+endif
+
+CONFIG_H = config.h
# MCU name
#MCU = at90usb1287
@@ -120,11 +147,11 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
diff --git a/keyboard/atomic/Makefile.pjrc b/keyboard/atomic/Makefile.pjrc
index 9655ff65a9..be83ba18b1 100644
--- a/keyboard/atomic/Makefile.pjrc
+++ b/keyboard/atomic/Makefile.pjrc
@@ -55,7 +55,7 @@ SRC = keymap_common.c \
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
else
- SRC := keymap_poker.c $(SRC)
+ SRC := keymap_jack.c $(SRC)
endif
CONFIG_H = config.h
diff --git a/keyboard/atomic/README 2.md b/keyboard/atomic/README 2.md
deleted file mode 100644
index 510cb5c8b6..0000000000
--- a/keyboard/atomic/README 2.md
+++ /dev/null
@@ -1,141 +0,0 @@
-GH60 keyboard firmware
-======================
-DIY compact keyboard designed and run by komar007 and Geekhack community.
-
-- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64)
-
-## GH60 Resources
-- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/)
-- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
-- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0)
-- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0)
-- [Group buy](http://geekhack.org/index.php?topic=41464.0)
-
-
-## Build
-Move to this directory then just run `make` like:
-
- $ make
-
-Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
-
-
-## Keymap
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
-
-To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
-
- $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
-
-
-### 1 Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
-
- Fn + Esc = `
- Fn + {left, down, up, right} = {home, pgdown, pgup, end}
-
-#### 1.0 Default layer
- ,-----------------------------------------------------------.
- | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- |-----------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- |-----------------------------------------------------------|
- |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
- |-----------------------------------------------------------|
- |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
- |-----------------------------------------------------------|
- |Ctrl|Gui |Alt | Space |Fn |Gui |App |Ctrl|
- `-----------------------------------------------------------'
-#### 1.1 Poker Fn layer
- ,-----------------------------------------------------------.
- |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |
- |-----------------------------------------------------------|
- | |FnQ| Up| | | | | | |Cal| |Hom|Ins| |
- |-----------------------------------------------------------|
- | |Lef|Dow|Rig| | |Psc|Slk|Pau| |Tsk|End| |
- |-----------------------------------------------------------|
- | |Del| |Web|Mut|VoU|VoD| |PgU|PgD|Del| Up |
- |-----------------------------------------------------------|
- | | | | FnS |Fn |Left|Down|Righ|
- `-----------------------------------------------------------'
-
-
-### 2. Plain
-Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
-See [keymap_plain.c](keymap_plain.c) for detail.
-
-#### 1.0 Plain Default layer
- ,-----------------------------------------------------------.
- |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- |-----------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- |-----------------------------------------------------------|
- |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
- |-----------------------------------------------------------|
- |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
- |-----------------------------------------------------------|
- |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl|
- `-----------------------------------------------------------'
-
-
-### 3. Hasu
-This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
-
-
-### 4. SpaceFN
-This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
-
-#### 4.0 Default layer
- ,-----------------------------------------------------------.
- |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
- |-----------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
- |-----------------------------------------------------------|
- |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
- |-----------------------------------------------------------|
- |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
- |-----------------------------------------------------------|
- |Ctrl|Gui |Alt | Space/Fn |Alt |Gui |App |Ctrl|
- `-----------------------------------------------------------'
-#### 4.1 SpaceFN layer
- ,-----------------------------------------------------------.
- |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
- |-----------------------------------------------------------|
- | | | | | | | |Hom|Up |End|Psc|Slk|Pau|Ins |
- |-----------------------------------------------------------|
- | | | | | | |PgU|Lef|Dow|Rig| | | |
- |-----------------------------------------------------------|
- | | | | | |Spc|PgD|` |~ | | | |
- |-----------------------------------------------------------|
- | | | | Fn | | | | |
- `-----------------------------------------------------------'
-
-
-### 5. HHKB
-[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
-#### 5.0: Default layer
- ,-----------------------------------------------------------.
- |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
- |-----------------------------------------------------------|
- |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Bspc |
- |-----------------------------------------------------------|
- |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|Return |
- |-----------------------------------------------------------|
- |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn |
- |-----------------------------------------------------------|
- | |Gui |Alt | Space | |Alt |Gui | |
- `-----------------------------------------------------------'
-#### 5.1: HHKB Fn layer
- ,-----------------------------------------------------------.
- |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- |-----------------------------------------------------------|
- |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
- |-----------------------------------------------------------|
- | |VoD|VoU|Mut|Ejc| | *| /|Hom|PgU|Lef|Rig|Enter |
- |-----------------------------------------------------------|
- | | | | | | | +| -|End|PgD|Dow| | |
- |-----------------------------------------------------------|
- | | | | | | | | |
- `-----------------------------------------------------------'
-
diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h
index 41f7bd8b9f..fd286bb992 100644
--- a/keyboard/atomic/config.h
+++ b/keyboard/atomic/config.h
@@ -24,8 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Ortholinear Keyboards
-#define PRODUCT Atomic Keyboard
-#define DESCRIPTION t.m.k. keyboard firmware for Atomic
+#define PRODUCT Atomic
+#define DESCRIPTION A compact ortholinear keyboard
/* key matrix size */
#define MATRIX_ROWS 5
diff --git a/keyboard/atomic/keymap_common.h b/keyboard/atomic/keymap_common.h
index cfb0cb3611..7c167eb51a 100644
--- a/keyboard/atomic/keymap_common.h
+++ b/keyboard/atomic/keymap_common.h
@@ -33,52 +33,82 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
-// JCK: Semi-Standard layout
-#define KEYMAP_JCK( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \
- K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
- { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
-}
-// ASK: Short Space layout
-#define KEYMAP_ASK_MESSY( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \
- K40, K41, K43, K44, K46, K48, K49, K4A, K4B, K4C, K4D, K4E \
+// MIT Layout
+/*
+ * ,-----------------------------------------------------------------------.
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------'
+ */
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+ K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \
) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \
- { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_NO, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K35, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \
}
-#define KEYMAP_ASK( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \
- K40, K41, K43, K44, K46, K47, K48, K4A, K4B, K4C, K4D, K4E \
+// Grid Layout
+/*
+ * ,-----------------------------------------------------------------------.
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------'
+ */
+#define KEYMAP_GRID( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \
) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_##K3D, KC_##K3E }, \
- { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_##K47, KC_##K48, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \
}
+#define KEYMAP_REVERSE( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+ K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \
+ ) { \
+ { KC_##K0B, KC_##K0A, KC_##K09, KC_##K08, KC_##K07, KC_##K06, KC_##K05, KC_##K04, KC_##K03, KC_##K02, KC_##K01, KC_##K00 }, \
+ { KC_##K1B, KC_##K1A, KC_##K19, KC_##K18, KC_##K17, KC_##K16, KC_##K15, KC_##K14, KC_##K13, KC_##K12, KC_##K11, KC_##K10 }, \
+ { KC_##K2B, KC_##K2A, KC_##K29, KC_##K28, KC_##K27, KC_##K26, KC_##K25, KC_##K24, KC_##K23, KC_##K22, KC_##K21, KC_##K20 }, \
+ { KC_##K3B, KC_##K3A, KC_##K39, KC_##K38, KC_##K37, KC_##K35, KC_##K35, KC_##K34, KC_##K33, KC_##K32, KC_##K31, KC_##K30 }, \
+ }
+
+#define KEYMAP_AND_REVERSE(args...) KEYMAP(args), KEYMAP_REVERSE(args)
+
+#define KEYMAP_SWAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+ K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \
+ ) { \
+ { KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05 }, \
+ { KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15 }, \
+ { KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25 }, \
+ { KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K35, KC_##K35, KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34 }, \
+}
-// MLO: Semi-Grid layout
+#define KEYMAP_AND_SWAP(args...) KEYMAP(args), KEYMAP_SWAP(args)
// GRD: Grid layout
@@ -97,7 +127,4 @@ extern const uint16_t fn_actions[];
}
-
-// PKR: Standard layout
-
#endif
diff --git a/keyboard/atomic/keymap_plain.c b/keyboard/atomic/keymap_plain.c
deleted file mode 100644
index e7f53649f0..0000000000
--- a/keyboard/atomic/keymap_plain.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \
- ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, MPLY, \
- LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \
- LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT),
- [1] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
- TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, DEL, \
- ESC, A, R, S, T, D, H, N, E, I, O, QUOT, ENT, MPLY, \
- LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \
- LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT),
- [2] = KEYMAP_JCK(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, BSPC, \
- TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC, RBRC, BSLS, DEL, \
- ESC, FN3, FN4, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, ENT, MPLY, \
- LSFT, FN9, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \
- LCTL, LALT, LGUI, SPC, TRNS, MNXT, VOLD, VOLU, MPLY),
-};
-const uint16_t PROGMEM fn_actions[] = {
- [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
- [3] = ACTION_DEFAULT_LAYER_SET(0),
- [4] = ACTION_DEFAULT_LAYER_SET(1),
-
- [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
-
- [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
- [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
- [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
- [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
- [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
- [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
- [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
- [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
- [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
- [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
- [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
- [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
- [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
- [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
- [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
- [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
-};
diff --git a/keyboard/atomic/keymap_ricky.c b/keyboard/atomic/keymap_ricky.c
deleted file mode 100644
index fcc91a1fa5..0000000000
--- a/keyboard/atomic/keymap_ricky.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, PSCR, \
- CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, INS, \
- LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, DEL, \
- LCTL, LGUI, LALT, SPC, RALT, RCTL, LEFT, DOWN, RGHT)
-};
-const uint16_t PROGMEM fn_actions[] = {
-};
-
diff --git a/keyboard/atomic/keymap_vlad.c b/keyboard/atomic/keymap_vlad.c
deleted file mode 100644
index e56bcf1618..0000000000
--- a/keyboard/atomic/keymap_vlad.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: qwerty */
- [0] = KEYMAP_ASK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \
- CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, VOLU, \
- LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, VOLD, \
- LCTL, LGUI, LALT, LGUI, SPC, RGUI, RALT, RGUI, RCTL, LEFT, DOWN, RGHT)
-};
-const uint16_t PROGMEM fn_actions[] = {
-}; \ No newline at end of file
diff --git a/keyboard/atomic/led.c b/keyboard/atomic/led.c
index 2d52fbf1c3..2c05746607 100644
--- a/keyboard/atomic/led.c
+++ b/keyboard/atomic/led.c
@@ -22,4 +22,17 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
void led_set(uint8_t usb_led)
{
+ // // Using PE6 Caps Lock LED
+ // if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ // {
+ // // Output high.
+ // DDRE |= (1<<6);
+ // PORTE |= (1<<6);
+ // }
+ // else
+ // {
+ // // Output low.
+ // DDRE &= ~(1<<6);
+ // PORTE &= ~(1<<6);
+ // }
}
diff --git a/keyboard/atomic/matrix.c b/keyboard/atomic/matrix.c
index fd233ff53f..01f66e90fb 100644
--- a/keyboard/atomic/matrix.c
+++ b/keyboard/atomic/matrix.c
@@ -1,5 +1,6 @@
/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2012 Jun Wako
+Generated by planckkeyboard.com (2014 Jack Humbert)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -22,7 +23,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
-#include "action_layer.h"
#include "print.h"
#include "debug.h"
#include "util.h"
@@ -43,7 +43,6 @@ static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
-
inline
uint8_t matrix_rows(void)
{
@@ -56,7 +55,6 @@ uint8_t matrix_cols(void)
return MATRIX_COLS;
}
-
void matrix_init(void)
{
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
@@ -106,7 +104,6 @@ uint8_t matrix_scan(void)
}
}
-
return 1;
}
@@ -119,7 +116,7 @@ bool matrix_is_modified(void)
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
- return (matrix[row] & ((matrix_row_t)1<<col));
+ return (matrix[row] & ((matrix_row_t)1<col));
}
inline
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
index ad25854e6d..81c9be1e4b 100644
--- a/keyboard/planck/Makefile
+++ b/keyboard/planck/Makefile
@@ -60,7 +60,8 @@ ifdef COMMON
SRC = keymap_common.c \
$(MATRIX) \
led.c \
- backlight.c
+ backlight.c \
+ beeps.c
ifdef KEYMAP
SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
@@ -68,12 +69,19 @@ else
SRC := common_keymaps/keymap_jack.c $(SRC)
endif
+ifdef MATRIX
+ SRC := matrix_$(MATRIX).c $(SRC)
+else
+ SRC := matrix_pcb.c $(SRC)
+endif
+
else
SRC = extended_keymap_common.c \
$(MATRIX) \
led.c \
- backlight.c
+ backlight.c \
+ beeps.c
ifdef KEYMAP
SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
@@ -81,6 +89,12 @@ else
SRC := extended_keymaps/extended_keymap_default.c $(SRC)
endif
+ifdef MATRIX
+ SRC := matrix_$(MATRIX).c $(SRC)
+else
+ SRC := matrix_pcb.c $(SRC)
+endif
+
endif
CONFIG_H = config.h
diff --git a/keyboard/planck/analog.c b/keyboard/planck/analog.c
new file mode 100644
index 0000000000..49b84ee0e8
--- /dev/null
+++ b/keyboard/planck/analog.c
@@ -0,0 +1,53 @@
+// Simple analog to digitial conversion
+
+#include <avr/io.h>
+#include <avr/pgmspace.h>
+#include <stdint.h>
+#include "analog.h"
+
+
+static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
+
+
+void analogReference(uint8_t mode)
+{
+ aref = mode & 0xC0;
+}
+
+
+// Arduino compatible pin input
+int16_t analogRead(uint8_t pin)
+{
+#if defined(__AVR_ATmega32U4__)
+ static const uint8_t PROGMEM pin_to_mux[] = {
+ 0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
+ 0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
+ if (pin >= 12) return 0;
+ return adc_read(pgm_read_byte(pin_to_mux + pin));
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+ if (pin >= 8) return 0;
+ return adc_read(pin);
+#else
+ return 0;
+#endif
+}
+
+// Mux input
+int16_t adc_read(uint8_t mux)
+{
+#if defined(__AVR_AT90USB162__)
+ return 0;
+#else
+ uint8_t low;
+
+ ADCSRA = (1<<ADEN) | ADC_PRESCALER; // enable ADC
+ ADCSRB = (1<<ADHSM) | (mux & 0x20); // high speed mode
+ ADMUX = aref | (mux & 0x1F); // configure mux input
+ ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC); // start the conversion
+ while (ADCSRA & (1<<ADSC)) ; // wait for result
+ low = ADCL; // must read LSB first
+ return (ADCH << 8) | low; // must read MSB only once!
+#endif
+}
+
+
diff --git a/keyboard/planck/analog.h b/keyboard/planck/analog.h
new file mode 100644
index 0000000000..9b95a93bef
--- /dev/null
+++ b/keyboard/planck/analog.h
@@ -0,0 +1,36 @@
+#ifndef _analog_h_included__
+#define _analog_h_included__
+
+#include <stdint.h>
+
+void analogReference(uint8_t mode);
+int16_t analogRead(uint8_t pin);
+int16_t adc_read(uint8_t mux);
+
+#define ADC_REF_POWER (1<<REFS0)
+#define ADC_REF_INTERNAL ((1<<REFS1) | (1<<REFS0))
+#define ADC_REF_EXTERNAL (0)
+
+// These prescaler values are for high speed mode, ADHSM = 1
+#if F_CPU == 16000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
+#elif F_CPU == 8000000L
+#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
+#elif F_CPU == 4000000L
+#define ADC_PRESCALER ((1<<ADPS2))
+#elif F_CPU == 2000000L
+#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
+#elif F_CPU == 1000000L
+#define ADC_PRESCALER ((1<<ADPS1))
+#else
+#define ADC_PRESCALER ((1<<ADPS0))
+#endif
+
+// some avr-libc versions do not properly define ADHSM
+#if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
+#if !defined(ADHSM)
+#define ADHSM (7)
+#endif
+#endif
+
+#endif
diff --git a/keyboard/planck/beeps.c b/keyboard/planck/beeps.c
new file mode 100644
index 0000000000..13e46e1daf
--- /dev/null
+++ b/keyboard/planck/beeps.c
@@ -0,0 +1,238 @@
+#include "beeps.h"
+#include <math.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+#define PI 3.14159265
+#define CHANNEL OCR1C
+
+volatile uint16_t sample;
+uint16_t lastSample;
+
+const int sounddata_length=200;
+
+const unsigned char sounddata_data[] PROGMEM = {128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128,
+128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128, 129, 127, 129, 128, 127, 133,
+117, 109, 125, 121, 116, 132, 140, 126, 114, 114, 116, 120, 114, 93, 73, 66, 76, 116, 142, 129,
+128, 129, 120, 119, 118, 104, 87, 123, 181, 194, 196, 198, 189, 176, 160, 162, 172, 164, 164, 183,
+197, 188, 168, 167, 170, 165, 185, 209, 206, 196, 196, 199, 185, 162, 156, 167, 176, 173, 170, 166,
+151, 142, 140, 134, 130, 127, 113, 86, 67, 66, 69, 75, 73, 75, 86, 90, 91, 84, 65, 48,
+41, 30, 26, 56, 91, 88, 72, 70, 73, 82, 89, 73, 57, 60, 74, 89, 92, 77, 63, 60,
+53, 47, 56, 64, 63, 61, 56, 54, 52, 36, 16, 22, 51, 66, 67, 70, 76, 88, 99, 92,
+77, 74, 85, 100, 106, 97, 83, 85, 96, 108, 133, 160, 164};
+
+void delay_us(int count) {
+ while(count--) {
+ _delay_us(1);
+ }
+}
+
+void beeps() {
+ // DDRB |= (1<<7);
+ // PORTB &= ~(1<<7);
+
+ // // Use full 16-bit resolution.
+ // ICR1 = 0xFFFF;
+
+ // // I could write a wall of text here to explain... but TL;DW
+ // // Go read the ATmega32u4 datasheet.
+ // // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+
+ // // Pin PB7 = OCR1C (Timer 1, Channel C)
+ // // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+ // // (i.e. start high, go low when counter matches.)
+ // // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+ // // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+
+ // TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+ // TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+
+ // // Turn off PWM control on PB7, revert to output low.
+ // // TCCR1A &= ~(_BV(COM1C1));
+ // // CHANNEL = ((1 << level) - 1);
+
+ // // Turn on PWM control of PB7
+ // TCCR1A |= _BV(COM1C1);
+ // // CHANNEL = level << OFFSET | 0x0FFF;
+ // // CHANNEL = 0b1010101010101010;
+
+ // float x = 12;
+ // float y = 24;
+ // float length = 50;
+ // float scale = 1;
+
+ // // int f1 = 1000000/440;
+ // // int f2 = 1000000/880;
+ // // for (uint32_t i = 0; i < length * 1000; i++) {
+ // // // int frequency = 1/((sin(PI*2*i*scale*pow(2, x/12.0))*.5+1 + sin(PI*2*i*scale*pow(2, y/12.0))*.5+1) / 2);
+
+ // // ICR1 = f1; // Set max to the period
+ // // OCR1C = f1 >> 1; // Set compare to half the period
+ // // // _delay_us(10);
+ // // }
+ // int frequency = 1000000/440;
+ // ICR1 = frequency; // Set max to the period
+ // OCR1C = frequency >> 1; // Set compare to half the period
+ // _delay_us(500000);
+
+ // TCCR1A &= ~(_BV(COM1C1));
+ // CHANNEL = 0;
+play_notes();
+
+
+ // play_note(55*pow(2, 0/12.0), 1);
+ // play_note(55*pow(2, 12/12.0), 1);
+ // play_note(55*pow(2, 24/12.0), 1);
+ // play_note(55*pow(2, 0/12.0), 1);
+ // play_note(55*pow(2, 12/12.0), 1);
+ // play_note(55*pow(2, 24/12.0), 1);
+
+ // play_note(0, 4);
+
+ // play_note(55*pow(2, 0/12.0), 8);
+ // play_note(55*pow(2, 12/12.0), 4);
+ // play_note(55*pow(2, 10/12.0), 4);
+ // play_note(55*pow(2, 12/12.0), 8);
+ // play_note(55*pow(2, 10/12.0), 4);
+ // play_note(55*pow(2, 7/12.0), 2);
+ // play_note(55*pow(2, 8/12.0), 2);
+ // play_note(55*pow(2, 7/12.0), 16);
+ // play_note(0, 4);
+ // play_note(55*pow(2, 3/12.0), 8);
+ // play_note(55*pow(2, 5/12.0), 4);
+ // play_note(55*pow(2, 7/12.0), 4);
+ // play_note(55*pow(2, 7/12.0), 8);
+ // play_note(55*pow(2, 5/12.0), 4);
+ // play_note(55*pow(2, 3/12.0), 4);
+ // play_note(55*pow(2, 2/12.0), 16);
+
+
+}
+
+void play_note(float freq, int length) {
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+
+ if (freq > 0) {
+ int frequency = 1000000/freq;
+ ICR1 = frequency; // Set max to the period
+ OCR1C = frequency >> 1; // Set compare to half the period
+
+ TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+ TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+ }
+
+ for (int i = 0; i < length; i++) {
+ _delay_us(50000);
+ }
+
+ TCCR1A &= ~(_BV(COM1C1));
+}
+
+// This is called at 8000 Hz to load the next sample.
+ISR(TIMER1_COMPA_vect) {
+ if (sample >= sounddata_length) {
+ if (sample == sounddata_length + lastSample) {
+ TIMSK1 &= ~_BV(OCIE1A);
+
+ // Disable the per-sample timer completely.
+ TCCR1B &= ~_BV(CS10);
+ }
+ else {
+ OCR1C = sounddata_length + lastSample - sample;
+ }
+ }
+ else {
+ OCR1C = pgm_read_byte(&sounddata_data[sample]);
+ }
+
+ ++sample;
+}
+
+void play_notes() {
+
+
+ // Set up Timer 2 to do pulse width modulation on the speaker
+ // pin.
+
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+
+ // Use internal clock (datasheet p.160)
+ // ASSR &= ~(_BV(EXCLK) | _BV(AS2));
+
+ // Set fast PWM mode (p.157)
+ TCCR1A |= _BV(WGM21) | _BV(WGM20);
+ TCCR1B &= ~_BV(WGM22);
+
+ // Do non-inverting PWM on pin OC2A (p.155)
+ // On the Arduino this is pin 11.
+ TCCR1A = (TCCR2A | _BV(COM2A1)) & ~_BV(COM2A0);
+ TCCR1A &= ~(_BV(COM2B1) | _BV(COM2B0));
+ // No prescaler (p.158)
+ TCCR1B = (TCCR1B & ~(_BV(CS12) | _BV(CS11))) | _BV(CS10);
+
+ // Set initial pulse width to the first sample.
+ OCR1A = pgm_read_byte(&sounddata_data[0]);
+
+
+
+
+ cli();
+
+ // Set CTC mode (Clear Timer on Compare Match) (p.133)
+ // Have to set OCR1A *after*, otherwise it gets reset to 0!
+ TCCR2B = (TCCR2B & ~_BV(WGM13)) | _BV(WGM12);
+ TCCR2A = TCCR2A & ~(_BV(WGM11) | _BV(WGM10));
+
+ // No prescaler (p.134)
+ TCCR2B = (TCCR2B & ~(_BV(CS12) | _BV(CS11))) | _BV(CS10);
+
+ // Set the compare register (OCR1A).
+ // OCR1A is a 16-bit register, so we have to do this with
+ // interrupts disabled to be safe.
+ // OCR2A = F_CPU / SAMPLE_RATE; // 16e6 / 8000 = 2000
+ OCR2A = 2000;
+
+ // Enable interrupt when TCNT1 == OCR1A (p.136)
+ TIMSK1 |= _BV(OCIE2A);
+
+ sample = 0;
+ sei();
+}
+
+void note(int x, float length) {
+ DDRB |= (1<<1);
+ int t = (int)(440*pow(2,-x/12.0)); // starting note
+ for (int y = 0; y < length*1000/t; y++) { // note length
+ PORTB |= (1<<1);
+ delay_us(t);
+ PORTB &= ~(1<<1);
+ delay_us(t);
+ }
+ PORTB &= ~(1<<1);
+}
+
+void true_note(float x, float y, float length) {
+ for (uint32_t i = 0; i < length * 50; i++) {
+ uint32_t v = (uint32_t) (round(sin(PI*2*i*640000*pow(2, x/12.0))*.5+1 + sin(PI*2*i*640000*pow(2, y/12.0))*.5+1) / 2 * pow(2, 8));
+ for (int u = 0; u < 8; u++) {
+ if (v & (1 << u) && !(PORTB&(1<<1)))
+ PORTB |= (1<<1);
+ else if (PORTB&(1<<1))
+ PORTB &= ~(1<<1);
+ }
+ }
+ PORTB &= ~(1<<1);
+} \ No newline at end of file
diff --git a/keyboard/planck/beeps.h b/keyboard/planck/beeps.h
new file mode 100644
index 0000000000..3e3c634ff5
--- /dev/null
+++ b/keyboard/planck/beeps.h
@@ -0,0 +1,9 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+
+void note(int x, float length);
+void beeps();
+void true_note(float x, float y, float length);
+void play_note(float freq, int length); \ No newline at end of file
diff --git a/keyboard/planck/common_keymaps/keymap_paul.c b/keyboard/planck/common_keymaps/keymap_paul.c
new file mode 100644
index 0000000000..49c90e0196
--- /dev/null
+++ b/keyboard/planck/common_keymaps/keymap_paul.c
@@ -0,0 +1,49 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Paul */
+ TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC,
+ FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
+ ESC, LCTL, LALT, LGUI, FN2, SPC, FN3, LEFT, DOWN, UP, RGHT),
+[1] = KEYMAP( /* Paul FN */
+ TRNS, TRNS, TRNS, FN8, FN9, TRNS, TRNS, TRNS, TRNS, MUTE, VOLD, VOLU,
+ FN1, TRNS, TRNS, HOME, END, TRNS, TRNS, TRNS, TRNS, MPRV, MPLY, MNXT,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, UP, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, RGHT),
+[2] = KEYMAP( /* Paul LOWER */
+ FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+ TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS,
+ TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
+[3] = KEYMAP( /* Paul RAISE */
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS,
+ TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN3, TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(1), // to Fn1 overlay (FN)
+ [2] = ACTION_LAYER_MOMENTARY(2), // to Fn2 overlay (LOWER)
+ [3] = ACTION_LAYER_MOMENTARY(3), // to Fn3 overlay (RAISE)
+
+ [8] = ACTION_MODS_KEY(MOD_LSFT, KC_HOME),
+ [9] = ACTION_MODS_KEY(MOD_LSFT, KC_END),
+ [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+ [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+ [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+ [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+ [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+ [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+ [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+ [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+ [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+ [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+ [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+ [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+ [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+ [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+ [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+ [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+};
diff --git a/keyboard/planck/extended_keymap_common.c b/keyboard/planck/extended_keymap_common.c
index 841b249431..ade8508444 100644
--- a/keyboard/planck/extended_keymap_common.c
+++ b/keyboard/planck/extended_keymap_common.c
@@ -24,7 +24,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "debug.h"
#include "backlight.h"
-
static action_t keycode_to_action(uint16_t keycode);
@@ -70,6 +69,9 @@ action_t action_for_key(uint8_t layer, keypos_t key)
} else if (keycode == RESET) {
bootloader_jump();
return;
+ } else if (keycode > RESET) {
+ // MIDI
+ return;
}
switch (keycode) {
diff --git a/keyboard/planck/extended_keymap_common.h b/keyboard/planck/extended_keymap_common.h
index 21d8978b7b..2dce4a2fac 100644
--- a/keyboard/planck/extended_keymap_common.h
+++ b/keyboard/planck/extended_keymap_common.h
@@ -27,7 +27,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "action_macro.h"
#include "report.h"
#include "host.h"
-#include "print.h"
+// #include "print.h"
#include "debug.h"
#ifdef BOOTMAGIC_ENABLE
@@ -174,4 +174,6 @@ extern const uint16_t fn_actions[];
#define RESET 0x5000
+#define MIDI(n) n | 0x6000
+
#endif
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_david.c b/keyboard/planck/extended_keymaps/extended_keymap_david.c
new file mode 100644
index 0000000000..fe9f3937a5
--- /dev/null
+++ b/keyboard/planck/extended_keymaps/extended_keymap_david.c
@@ -0,0 +1,76 @@
+#include "extended_keymap_common.h"
+#include "beeps.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_A, KC_S, KC_D, KC_F, KC_G, KC_ENT, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {M(10), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ // Space is repeated to accommadate for both spacebar wiring positions
+},
+[1] = { /* Colemak */
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[2] = { /* RAISE */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, M(0), M(1), M(2), KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {KC_TRNS, KC_F11, KC_F12, M(0), M(1), M(2), M(3), M(4), M(5), M(6), M(7), KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[3] = { /* LOWER */
+ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, M(0), M(1), M(2), S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+ {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ if (record->event.pressed) {
+ switch(id) {
+ case 0:
+ true_note(12, 12, 20);
+ break;
+ case 1:
+ true_note(14, 14, 20);
+ break;
+ case 2:
+ true_note(16, 16, 20);
+ break;
+ case 3:
+ true_note(17, 17, 20);
+ break;
+ case 4:
+ true_note(19, 19, 20);
+ break;
+ case 5:
+ true_note(21, 21, 20);
+ break;
+ case 6:
+ true_note(23, 23, 20);
+ break;
+ case 7:
+ true_note(24, 24, 20);
+ break;
+ case 10:
+
+ break;
+ }
+ }
+ return MACRO_NONE;
+};
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_default.c b/keyboard/planck/extended_keymaps/extended_keymap_default.c
index c35b283675..8bf1a0c87b 100644
--- a/keyboard/planck/extended_keymaps/extended_keymap_default.c
+++ b/keyboard/planck/extended_keymaps/extended_keymap_default.c
@@ -5,7 +5,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
{KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
{KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
- {BL_STEP, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
// Space is repeated to accommadate for both spacebar wiring positions
},
[1] = { /* Colemak */
@@ -16,19 +16,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
},
[2] = { /* RAISE */
{KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
- {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
- {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
},
[3] = { /* LOWER */
{S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
- {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
{KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
}
};
-
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
[2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
@@ -41,10 +40,15 @@ const uint16_t PROGMEM fn_actions[] = {
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
- switch(id) {
- case 0:
- return MACRODOWN(T(CM_T), END);
- break;
- }
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ ACTION_BACKLIGHT_STEP();
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
return MACRO_NONE;
};
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_dzobert.c b/keyboard/planck/extended_keymaps/extended_keymap_dzobert.c
new file mode 100644
index 0000000000..6b3864b6c6
--- /dev/null
+++ b/keyboard/planck/extended_keymaps/extended_keymap_dzobert.c
@@ -0,0 +1,49 @@
+#include "extended_keymap_common.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TAB},
+ {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_BSPC},
+ {KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_FN4, KC_RSFT, KC_LGUI, KC_LSFT, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ // Space is repeated to accommadate for both spacebar wiring positions
+},
+[1] = { /* Colemak */
+ {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_TAB},
+ {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_BSPC},
+ {KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_FN3, KC_RSFT, KC_LGUI, KC_LSFT, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[2] = { /* RAISE */
+ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+ {KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_DEL},
+ {KC_TRNS, KC_GRV, KC_MINS, KC_EQL, KC_QUOT, S(KC_QUOT), S(KC_LBRC), S(KC_RBRC), KC_LBRC, KC_RBRC, KC_BSLS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_HOME, KC_PGUP, KC_PGDN, KC_END}
+},
+[3] = { /* LOWER */
+ {KC_POWER,KC_PSCR, KC_SLCK, KC_PAUSE, KC_NLCK, KC_EXECUTE, KC_MENU, KC_APP, KC_7, KC_8, KC_9, KC_KP_SLASH},
+ {KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_CAPS, KC_CANCEL, KC_UNDO, KC_AGAIN, KC_4, KC_5, KC_6, KC_KP_ASTERISK},
+ {KC_TRNS, KC_INSERT,KC_CUT, KC_COPY, KC_PASTE, KC_BSLS, KC_9, KC_0, KC_1, KC_2, KC_3, KC_KP_MINUS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_KP_DOT, KC_KP_ENTER, KC_KP_PLUS}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ return MACRODOWN(T(CM_T), END);
+ break;
+ }
+ return MACRO_NONE;
+}; \ No newline at end of file
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_kyle.c b/keyboard/planck/extended_keymaps/extended_keymap_kyle.c
new file mode 100644
index 0000000000..b7b7fcb76b
--- /dev/null
+++ b/keyboard/planck/extended_keymaps/extended_keymap_kyle.c
@@ -0,0 +1,49 @@
+#include "extended_keymap_common.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_RCTL, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ // Space is repeated to accommadate for both spacebar wiring positions
+},
+[1] = { /* Colemak */
+ {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
+ {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT},
+ {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[2] = { /* RAISE */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS},
+ {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[3] = { /* LOWER */
+ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), LSFT(RSFT(KC_D)), KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+ {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS},
+ {BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ return MACRODOWN(T(CM_T), END);
+ break;
+ }
+ return MACRO_NONE;
+};
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_leo.c b/keyboard/planck/extended_keymaps/extended_keymap_leo.c
new file mode 100644
index 0000000000..0c8b9e3156
--- /dev/null
+++ b/keyboard/planck/extended_keymaps/extended_keymap_leo.c
@@ -0,0 +1,46 @@
+#include "extended_keymap_common.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* BASE */
+ {KC_ESC, KC_LBRC, KC_QUOT, KC_SCLN, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC},
+ {KC_TAB, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT},
+ {KC_LSFT, KC_DOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_COMM},
+ {KC_LCTL, KC_LALT, KC_LGUI, FUNC(3), FUNC(2), KC_SPC, KC_SPC, FUNC(1), FUNC(3), KC_RGUI, KC_RALT, KC_RCTL}
+},
+[2] = { /* RAISE */
+ {RALT(KC_RBRC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, S(KC_RBRC)},
+ {KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+},
+[3] = { /* LOWER */
+ {S(KC_EQL),S(KC_1),S(KC_2),S(KC_3),RALT(KC_5),S(KC_5), S(KC_6), S(KC_7),RALT(KC_7),RALT(KC_0),S(KC_0), KC_MINS},
+ {KC_TRNS,RALT(KC_2),S(KC_SLSH),KC_NUBS,S(KC_NUBS),RALT(KC_MINS),RALT(KC_NUBS), KC_NUHS, S(KC_8), S(KC_9), S(KC_MINS), KC_SLSH},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_8), RALT(KC_9), KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+},
+[4] = { /* META */
+ {KC_TRNS, KC_HOME, KC_UP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_TRNS, KC_DEL},
+ {KC_TRNS, KC_RGHT, KC_DOWN, KC_LEFT, KC_PGUP, KC_TRNS, KC_PGUP, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, KC_TRNS, KC_PGDN, KC_TRNS, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+ [3] = ACTION_LAYER_MOMENTARY(4), // to META
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ return MACRODOWN(T(CM_T), END);
+ break;
+ }
+ return MACRO_NONE;
+};
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_max.c b/keyboard/planck/extended_keymaps/extended_keymap_max.c
new file mode 100644
index 0000000000..daad22dffe
--- /dev/null
+++ b/keyboard/planck/extended_keymaps/extended_keymap_max.c
@@ -0,0 +1,49 @@
+#include "extended_keymap_common.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
+ {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT },
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT},
+ {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+ // Space is repeated to accommadate for both spacebar wiring positions
+},
+[1] = { /* Colemak */
+ {KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC},
+ {KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT },
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT},
+ {KC_LCTL, BL_STEP, KC_LALT, KC_LGUI, FUNC(2), KC_SPC, KC_SPC, FUNC(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
+},
+[2] = { /* RAISE */
+ {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TRNS},
+ {KC_TRNS, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_BSLS},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(1), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[3] = { /* LOWER */
+ {S(KC_GRV), S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_BSPC},
+ {KC_TRNS, FUNC(3), FUNC(4), RESET, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL), S(KC_LBRC), S(KC_RBRC), KC_TRNS},
+ {KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, S(KC_BSLS)},
+ {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to RAISE
+ [2] = ACTION_LAYER_MOMENTARY(3), // to LOWER
+
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ return MACRODOWN(T(CM_T), END);
+ break;
+ }
+ return MACRO_NONE;
+};
diff --git a/keyboard/planck/extended_keymaps/extended_keymap_numpad.c b/keyboard/planck/extended_keymaps/extended_keymap_numpad.c
new file mode 100644
index 0000000000..721fd496b0
--- /dev/null
+++ b/keyboard/planck/extended_keymaps/extended_keymap_numpad.c
@@ -0,0 +1,26 @@
+#include "extended_keymap_common.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Qwerty */
+ {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_KP_MINUS, KC_KP_PLUS, KC_KP_PLUS, KC_KP_ENTER, KC_KP_ENTER},
+ {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_KP_ASTERISK, KC_KP_9, KC_KP_6, KC_KP_3, KC_KP_DOT},
+ {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_KP_SLASH, KC_KP_8, KC_KP_5, KC_KP_2, KC_KP_0},
+ {BL_STEP, KC_LCTL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, KC_NUMLOCK, KC_KP_7, KC_KP_4, KC_KP_1, KC_KP_0}
+ // Space is repeated to accommadate for both spacebar wiring positions
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ return MACRODOWN(T(CM_T), END);
+ break;
+ }
+ return MACRO_NONE;
+}; \ No newline at end of file
diff --git a/keyboard/planck/flash-pcb.sh b/keyboard/planck/flash-pcb.sh
new file mode 100755
index 0000000000..2ae15458c0
--- /dev/null
+++ b/keyboard/planck/flash-pcb.sh
@@ -0,0 +1,3 @@
+dfu-programmer atmega32u4 erase --force
+dfu-programmer atmega32u4 flash planck_pcb.hex
+dfu-programmer atmega32u4 reset \ No newline at end of file
diff --git a/keyboard/planck/keymap_common.h b/keyboard/planck/keymap_common.h
index 4a0bcfbb08..d46df92876 100644
--- a/keyboard/planck/keymap_common.h
+++ b/keyboard/planck/keymap_common.h
@@ -25,7 +25,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "action_macro.h"
#include "report.h"
#include "host.h"
-#include "print.h"
+// #include "print.h"
#include "debug.h"
#include "keymap.h"
diff --git a/keyboard/planck/matrix_center.c b/keyboard/planck/matrix_center.c
index 8e34130d6f..2a603f334b 100644
--- a/keyboard/planck/matrix_center.c
+++ b/keyboard/planck/matrix_center.c
@@ -23,10 +23,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <avr/io.h>
#include <util/delay.h>
#include "action_layer.h"
-#include "print.h"
+// #include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
+#include "analog.h"
#ifndef DEBOUNCE
@@ -40,9 +41,14 @@ static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
+static void init_encoder(void);
+static void init_pot(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
-
+int16_t analogRead(uint8_t pin);
+uint8_t state;
+int32_t position;
+int16_t value;
inline
uint8_t matrix_rows(void)
@@ -61,6 +67,8 @@ void matrix_init(void)
// initialize row and col
unselect_rows();
init_cols();
+ init_encoder();
+ init_pot();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -69,6 +77,50 @@ void matrix_init(void)
}
}
+static void init_encoder(void)
+{
+ DDRC &= ~(1<<6 | 1<<7);
+ PORTC |= (1<<6 | 1<<7);
+
+ uint8_t s = 0;
+ _delay_ms(1);
+ if (PINC&(1<<6)) s |= 1;
+ if (PINC&(1<<7)) s |= 2;
+ state = s;
+ position = 0;
+}
+
+void read_encoder(void)
+{
+ uint8_t s = state & 3;
+ if (PINC&(1<<6)) s |= 4;
+ if (PINC&(1<<7)) s |= 8;
+ state = (s >> 2);
+ switch (s) {
+ case 1: case 7: case 8: case 14:
+ position++;
+ break;
+ case 2: case 4: case 11: case 13:
+ position--;
+ break;
+ case 3: case 12:
+ position += 2;
+ break;
+ case 6: case 9:
+ position -= 2;
+ break;
+ }
+}
+
+#define HEX(n) (((n) < 10) ? ((n) + '0') : ((n) + 'A' - 10))
+
+static void init_pot(void)
+{
+ // DDRD &= ~(1<<4);
+ // PORTD |= (1<<4);
+ // DIDR2 = (1<<0);
+}
+
uint8_t matrix_scan(void)
{
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
@@ -95,6 +147,21 @@ uint8_t matrix_scan(void)
}
}
+ read_encoder();
+ if (position >= 2) {
+ register_code(KC_AUDIO_VOL_UP);
+ unregister_code(KC_AUDIO_VOL_UP);
+ position = 0;
+ } else if (position <= -2) {
+ register_code(KC_AUDIO_VOL_DOWN);
+ unregister_code(KC_AUDIO_VOL_DOWN);
+ position = 0;
+ }
+
+ // uint16_t val = analogRead(11);
+
+ // debug("analogRead: "); debug_hex(val); debug("\n");
+
return 1;
}
diff --git a/keyboard/planck/matrix_handwired.c b/keyboard/planck/matrix_handwired.c
index 2f2dbdb108..2ae69c3c80 100644
--- a/keyboard/planck/matrix_handwired.c
+++ b/keyboard/planck/matrix_handwired.c
@@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
-#include "print.h"
+// #include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
diff --git a/keyboard/planck/matrix_pcb.c b/keyboard/planck/matrix_pcb.c
index 11a7376d86..6f6ccd5c1c 100644
--- a/keyboard/planck/matrix_pcb.c
+++ b/keyboard/planck/matrix_pcb.c
@@ -23,13 +23,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
-#include "print.h"
+// #include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "backlight.h" // TODO fix this dependency
-
#ifndef DEBOUNCE
# define DEBOUNCE 10
#endif
@@ -67,7 +66,7 @@ void matrix_init(void)
// Turn status LED on
DDRE |= (1<<6);
PORTE |= (1<<6);
-
+
// initialize row and col
unselect_rows();
init_cols();