summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--keyboard/atomic/Makefile4
-rw-r--r--keyboard/atomic/backlight.c49
-rw-r--r--keyboard/atomic/config.h4
-rw-r--r--keyboard/atomic/keymap_common.h18
-rw-r--r--keyboard/atomic/keymap_grid.c40
-rw-r--r--keyboard/atomic/matrix.c109
-rw-r--r--keyboard/planck/PCB_GUIDE.md4
-rw-r--r--keyboard/planck/common_keymaps/keymap_sean.c56
-rw-r--r--keyboard/planck/matrix_pcb.c14
9 files changed, 212 insertions, 86 deletions
diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile
index c4e0cb45d7..0d5baa9fa1 100644
--- a/keyboard/atomic/Makefile
+++ b/keyboard/atomic/Makefile
@@ -50,7 +50,8 @@ TARGET_DIR = .
# project specific files
SRC = keymap_common.c \
matrix.c \
- led.c
+ led.c \
+ backlight.c
ifdef KEYMAP
SRC := keymap_$(KEYMAP).c $(SRC)
@@ -121,6 +122,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Optimize size but this may cause error "relocation truncated to fit"
diff --git a/keyboard/atomic/backlight.c b/keyboard/atomic/backlight.c
new file mode 100644
index 0000000000..06f103b4ac
--- /dev/null
+++ b/keyboard/atomic/backlight.c
@@ -0,0 +1,49 @@
+
+#include <avr/io.h>
+#include "backlight.h"
+
+#define CHANNEL OCR1C
+
+void backlight_init_ports()
+{
+
+ // Setup PB7 as output and output low.
+ DDRB |= (1<<7);
+ PORTB &= ~(1<<7);
+
+ // Use full 16-bit resolution.
+ ICR1 = 0xFFFF;
+
+ // I could write a wall of text here to explain... but TL;DW
+ // Go read the ATmega32u4 datasheet.
+ // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+
+ // Pin PB7 = OCR1C (Timer 1, Channel C)
+ // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+ // (i.e. start high, go low when counter matches.)
+ // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+ // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+
+ TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+ TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+
+ backlight_init();
+}
+
+void backlight_set(uint8_t level)
+{
+ if ( level == 0 )
+ {
+ // Turn off PWM control on PB7, revert to output low.
+ TCCR1A &= ~(_BV(COM1C1));
+ // CHANNEL = level << OFFSET | 0x0FFF;
+ CHANNEL = ((1 << level) - 1);
+ }
+ else
+ {
+ // Turn on PWM control of PB7
+ TCCR1A |= _BV(COM1C1);
+ // CHANNEL = level << OFFSET | 0x0FFF;
+ CHANNEL = ((1 << level) - 1);
+ }
+} \ No newline at end of file
diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h
index 5ea953805f..41f7bd8b9f 100644
--- a/keyboard/atomic/config.h
+++ b/keyboard/atomic/config.h
@@ -34,6 +34,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
+/* number of backlight levels */
+/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */
+#define BACKLIGHT_LEVELS 15
+
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
diff --git a/keyboard/atomic/keymap_common.h b/keyboard/atomic/keymap_common.h
index c582c0135f..cfb0cb3611 100644
--- a/keyboard/atomic/keymap_common.h
+++ b/keyboard/atomic/keymap_common.h
@@ -80,7 +80,23 @@ extern const uint16_t fn_actions[];
// MLO: Semi-Grid layout
-// KLN: Grid layout
+// GRD: Grid layout
+
+#define KEYMAP_GRD( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \
+}
+
+
// PKR: Standard layout
diff --git a/keyboard/atomic/keymap_grid.c b/keyboard/atomic/keymap_grid.c
new file mode 100644
index 0000000000..9d42272e64
--- /dev/null
+++ b/keyboard/atomic/keymap_grid.c
@@ -0,0 +1,40 @@
+#include "keymap_common.h"
+
+// GRD: Grid layout
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = KEYMAP_GRD(FN29, FN30, FN31, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSLS, GRV, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSPC, DEL, \
+ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, ENT, PGUP, \
+ LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, RSFT, UP, PGDN, \
+ LCTL, LALT, LGUI, SPC, SPC, SPC, SPC, SPC, SPC, RALT, APP, RCTL, LEFT, DOWN, RGHT), \
+
+};
+const uint16_t PROGMEM fn_actions[] = {
+ [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay
+ [3] = ACTION_DEFAULT_LAYER_SET(0),
+ [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+ [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+
+ [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+ [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+ [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+ [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+ [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+ [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+ [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+ [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+ [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+ [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+ [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+ [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+ [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+ [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+ [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+ [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+ [29] = ACTION_BACKLIGHT_TOGGLE(),
+ [30] = ACTION_BACKLIGHT_INCREASE(),
+ [31] = ACTION_BACKLIGHT_DECREASE()
+};
diff --git a/keyboard/atomic/matrix.c b/keyboard/atomic/matrix.c
index 98102cb694..fd233ff53f 100644
--- a/keyboard/atomic/matrix.c
+++ b/keyboard/atomic/matrix.c
@@ -59,6 +59,16 @@ uint8_t matrix_cols(void)
void matrix_init(void)
{
+ // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+
+ backlight_init_ports();
+
+ // Turn status LED on
+ DDRE |= (1<<6);
+ PORTE |= (1<<6);
+
// initialize row and col
unselect_rows();
init_cols();
@@ -137,75 +147,84 @@ uint8_t matrix_key_count(void)
return count;
}
-/* Column pin configuration
- * col: 0 1 2 3 4 5 6 7 8 9 10 11
- * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
- */
+//
+// Atomic PCB Rev 0 Pin Assignments
+//
+// Column: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
+// Pin: F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7, D3, D2, D1
+//
static void init_cols(void)
{
- DDRC &= ~(1<<6 | 1<<7);
- PORTC |= (1<<6 | 1<<7);
- DDRD &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
- PORTD |= (1<<4 | 1<<5 | 1<<6 | 1<<7);
- DDRB &= ~(1<<4 | 1<<5 | 1<<6);
- PORTB |= (1<<4 | 1<<5 | 1<<6);
- DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
- PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+ DDRB &= ~(1<<4 | 1<<0);
+ PORTB |= (1<<4 | 1<<0);
+ DDRC &= ~(1<<7);
+ PORTC |= (1<<7);
+ DDRD &= ~(1<<7 | 1<<6 | 1<<4 | 1<<3 | 1<<2 | 1<<1);
+ PORTD |= (1<<7 | 1<<6 | 1<<4 | 1<<3 | 1<<2 | 1<<1);
+ DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+ PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
}
static matrix_row_t read_cols(void)
{
- return (PINC&(1<<6) ? 0 : (1<< 0)) |
- (PINC&(1<<7) ? 0 : (1<< 1)) |
- (PIND&(1<<5) ? 0 : (1<< 2)) |
- (PIND&(1<<4) ? 0 : (1<< 3)) |
- (PIND&(1<<6) ? 0 : (1<< 4)) |
- (PIND&(1<<7) ? 0 : (1<< 5)) |
- (PINB&(1<<4) ? 0 : (1<< 6)) |
- (PINB&(1<<5) ? 0 : (1<< 7)) |
- (PINB&(1<<6) ? 0 : (1<< 8)) |
- (PINF&(1<<7) ? 0 : (1<< 9)) |
- (PINF&(1<<6) ? 0 : (1<<10)) |
- (PINF&(1<<5) ? 0 : (1<<11)) |
- (PINF&(1<<4) ? 0 : (1<<12)) |
- (PINF&(1<<1) ? 0 : (1<<13)) |
- (PINF&(1<<0) ? 0 : (1<<14));
+ return (PINF&(1<<1) ? 0 : (1<<0)) |
+ (PINF&(1<<0) ? 0 : (1<<1)) |
+ (PINB&(1<<0) ? 0 : (1<<2)) |
+ (PINC&(1<<7) ? 0 : (1<<3)) |
+ (PINF&(1<<4) ? 0 : (1<<4)) |
+ (PINF&(1<<5) ? 0 : (1<<5)) |
+ (PINF&(1<<6) ? 0 : (1<<6)) |
+ (PINF&(1<<7) ? 0 : (1<<7)) |
+ (PIND&(1<<4) ? 0 : (1<<8)) |
+ (PIND&(1<<6) ? 0 : (1<<9)) |
+ (PINB&(1<<4) ? 0 : (1<<10)) |
+ (PIND&(1<<7) ? 0 : (1<<11)) |
+ (PIND&(1<<3) ? 0 : (1<<12)) |
+ (PIND&(1<<2) ? 0 : (1<<13)) |
+ (PIND&(1<<1) ? 0 : (1<<14));
}
-/* Row pin configuration
- * row: 0 1 2 3
- * pin: B0 B1 B2 B3
- */
+
+//
+// Atomic PCB Rev 0 Pin Assignments
+//
+// Row: 0, 1, 2, 3, 4
+// Pin: D0, D5, B5, B6, C6
+//
+
static void unselect_rows(void)
{
- // Hi-Z(DDR:0, PORT:0) to unselect
- DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
- PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+ DDRB &= ~(1<<5 | 1<<6);
+ PORTB |= (1<<5 | 1<<6);
+ DDRD &= ~(1<<0 | 1<<5);
+ PORTD |= (1<<0 | 1<<5);
+ DDRC &= ~(1<<6);
+ PORTC |= (1<<6);
}
static void select_row(uint8_t row)
{
switch (row) {
case 0:
- DDRB |= (1<<0);
- PORTB &= ~(1<<0);
+ DDRD |= (1<<0);
+ PORTD &= ~(1<<0);
break;
case 1:
- DDRB |= (1<<1);
- PORTB &= ~(1<<1);
+ DDRD |= (1<<5);
+ PORTD &= ~(1<<5);
break;
case 2:
- DDRB |= (1<<2);
- PORTB &= ~(1<<2);
+ DDRB |= (1<<5);
+ PORTB &= ~(1<<5);
break;
case 3:
- DDRB |= (1<<3);
- PORTB &= ~(1<<3);
+ DDRB |= (1<<6);
+ PORTB &= ~(1<<6);
break;
case 4:
- DDRB |= (1<<7);
- PORTB &= ~(1<<7);
- break;
+ DDRC |= (1<<6);
+ PORTC &= ~(1<<6);
+ break;
}
}
diff --git a/keyboard/planck/PCB_GUIDE.md b/keyboard/planck/PCB_GUIDE.md
index efe960abbf..59fc65bd08 100644
--- a/keyboard/planck/PCB_GUIDE.md
+++ b/keyboard/planck/PCB_GUIDE.md
@@ -3,12 +3,12 @@
## Setting up the environment
### Windows
-1. Install [MHV AVR Tools][mhv] for AVR GCC compiler and [Cygwin][cygwin](or [MinGW][mingw]) for shell terminal.
+1. Install [WinAVR Tools](http://sourceforge.net/projects/winavr/) for AVR GCC compiler.
2. Install [DFU-Programmer][dfu-prog] (the -win one).
3. Start DFU bootloader on the chip first time you will see 'Found New Hardware Wizard' to install driver. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you will need to update its driver on 'Device Manager' to the `dfu-programmer` driver.
### Mac
-1. Install [CrossPack](https://www.obdev.at/downloads/crosspack/CrossPack-AVR-20131216.dmg).
+1. Install [CrossPack](http://www.obdev.at/products/crosspack/index.html) or install Xcode from the App Store.
2. Install [DFU-Programmer][dfu-prog].
### Linux
diff --git a/keyboard/planck/common_keymaps/keymap_sean.c b/keyboard/planck/common_keymaps/keymap_sean.c
index 4fe07f701a..cb2ef8f138 100644
--- a/keyboard/planck/common_keymaps/keymap_sean.c
+++ b/keyboard/planck/common_keymaps/keymap_sean.c
@@ -14,44 +14,40 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT),
[2] = KEYMAP( /* fn1 lower */
- F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10,
+ F1, F2, F3, F4, F5, NO, NO, F6, F7, F8, F9, F10,
1, 2, 3, 4, 5, F18, DEL, 6, 7, 8, 9, 0,
- FN3, FN4, TRNS, GRV, MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN5, HOME, PGDN, PGUP, END),
+ FN3, FN4, FN28, GRV, MINS, TRNS, INS, BSLS, LBRC, RBRC, TRNS, TRNS,
+ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END),
[3] = KEYMAP( /* fn2 raise */
- F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10,
- F11, F12, F13, F14, F15, F18, DEL, F16, F17, F18, F19, F20,
- FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT, PWR, LSFT,PAUSE, RSFT,
- LEFT, DOWN, UP, RGHT, FN5, TRNS, TRNS, MNXT, VOLD, VOLU, MUTE),
-
- [4] = KEYMAP( /* lower + raise */
- LEFT, DOWN, UP, RGHT, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN, UP, RGHT,
- HOME, PGDN, PGUP, END, TRNS, F18, DEL, TRNS, HOME, PGDN, PGUP, END,
- FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT, PWR, MPLY, RSFT,
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MNXT, VOLD, VOLU, MUTE),
+ MRWD, MPLY, MFFD, NO, NO, FN21, FN22, EJCT, PWR, LSFT,PAUSE, RSFT,
+ FN11, FN12, FN13, FN14, FN15, F18, DEL, FN16, FN17, FN18, FN19, FN20,
+ FN3, FN4, FN28, FN23, FN24, TRNS, INS, FN25, FN26, FN27, MPRV, MNXT,
+ TRNS, TRNS, TRNS, TRNS, FN1, TRNS, FN2, NO, VOLD, VOLU, MUTE),
};
+
const uint16_t PROGMEM fn_actions[] = {
[1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay LOWER
[2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay RAISE
[3] = ACTION_DEFAULT_LAYER_SET(0),
[4] = ACTION_DEFAULT_LAYER_SET(1),
- [5] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay LOWER + RAISE
- [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
- [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
- [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
- [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
- [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
- [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
- [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
- [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
- [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
- [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
- [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
- [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
- [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
- [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
- [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
- [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+ [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+ [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+ [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+ [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+ [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+ [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+ [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+ [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+ [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+ [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+ [21] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH),
+ [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+ [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+ [24] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+ [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+ [26] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+ [27] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+ [28] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
};
diff --git a/keyboard/planck/matrix_pcb.c b/keyboard/planck/matrix_pcb.c
index 7d46baf3de..11a7376d86 100644
--- a/keyboard/planck/matrix_pcb.c
+++ b/keyboard/planck/matrix_pcb.c
@@ -182,6 +182,13 @@ static matrix_row_t read_cols(void)
}
+//
+// Planck PCB Rev 1 Pin Assignments
+//
+// Row: 0, 1, 2, 3
+// Pin: D0, D5, B5, B6
+//
+
static void unselect_rows(void)
{
DDRB &= ~(1<<5 | 1<<6);
@@ -191,13 +198,6 @@ static void unselect_rows(void)
}
-//
-// Planck PCB Rev 1 Pin Assignments
-//
-// Row: 0, 1, 2, 3
-// Pin: D0, D5, B5, B6
-//
-
static void select_row(uint8_t row)
{
switch (row) {
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 09:59:47 +0000