diff options
39 files changed, 2670 insertions, 96 deletions
diff --git a/common/action.c b/common/action.c index ec8eeae7bc..220de0f8a0 100644 --- a/common/action.c +++ b/common/action.c @@ -348,7 +348,7 @@ void register_code(uint8_t code) return; } -#ifdef LOCKING_SUPPORT_ENABLE +#ifdef LOCKING_SUPPORT_ENABLE else if (KC_LOCKING_CAPS == code) { #ifdef LOCKING_RESYNC_ENABLE // Resync: ignore if caps lock already is on diff --git a/common/led.h b/common/led.h index 402a247b9a..b84a3ff943 100644 --- a/common/led.h +++ b/common/led.h @@ -26,6 +26,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USB_LED_SCROLL_LOCK 2 #define USB_LED_COMPOSE 3 #define USB_LED_KANA 4 +#define USB_LED_FUNCTION 5 void led_set(uint8_t usb_led); diff --git a/keyboard/atomic/Makefile b/keyboard/atomic/Makefile new file mode 100644 index 0000000000..c4e0cb45d7 --- /dev/null +++ b/keyboard/atomic/Makefile @@ -0,0 +1,135 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = atomic_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_vlad.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/atomic/Makefile.pjrc b/keyboard/atomic/Makefile.pjrc new file mode 100644 index 0000000000..9655ff65a9 --- /dev/null +++ b/keyboard/atomic/Makefile.pjrc @@ -0,0 +1,116 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_poker.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover(+500) +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +plain: OPT_DEFS += -DKEYMAP_PLAIN +plain: all + +poker: OPT_DEFS += -DKEYMAP_POKER +poker: all + +poker_set: OPT_DEFS += -DKEYMAP_POKER_SET +poker_set: all + +poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT +poker_bit: all diff --git a/keyboard/atomic/README 2.md b/keyboard/atomic/README 2.md new file mode 100644 index 0000000000..510cb5c8b6 --- /dev/null +++ b/keyboard/atomic/README 2.md @@ -0,0 +1,141 @@ +GH60 keyboard firmware +====================== +DIY compact keyboard designed and run by komar007 and Geekhack community. + +- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64) + +## GH60 Resources +- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/) +- [Prototyping](http://geekhack.org/index.php?topic=34959.0) +- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0) +- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0) +- [Group buy](http://geekhack.org/index.php?topic=41464.0) + + +## Build +Move to this directory then just run `make` like: + + $ make + +Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now. + + +## Keymap +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files. + +To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like: + + $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>] + + +### 1 Poker +[keymap_poker.c](keymap_poker.c) emulates original Poker layers +while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. + + Fn + Esc = ` + Fn + {left, down, up, right} = {home, pgdown, pgup, end} + +#### 1.0 Default layer + ,-----------------------------------------------------------. + | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Fn |Gui |App |Ctrl| + `-----------------------------------------------------------' +#### 1.1 Poker Fn layer + ,-----------------------------------------------------------. + |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | + |-----------------------------------------------------------| + | |FnQ| Up| | | | | | |Cal| |Hom|Ins| | + |-----------------------------------------------------------| + | |Lef|Dow|Rig| | |Psc|Slk|Pau| |Tsk|End| | + |-----------------------------------------------------------| + | |Del| |Web|Mut|VoU|VoD| |PgU|PgD|Del| Up | + |-----------------------------------------------------------| + | | | | FnS |Fn |Left|Down|Righ| + `-----------------------------------------------------------' + + +### 2. Plain +Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host. +See [keymap_plain.c](keymap_plain.c) for detail. + +#### 1.0 Plain Default layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space |Alt |Gui |App |Ctrl| + `-----------------------------------------------------------' + + +### 3. Hasu +This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail. + + +### 4. SpaceFN +This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0). + +#### 4.0 Default layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| + |-----------------------------------------------------------| + |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | + |-----------------------------------------------------------| + |Ctrl|Gui |Alt | Space/Fn |Alt |Gui |App |Ctrl| + `-----------------------------------------------------------' +#### 4.1 SpaceFN layer + ,-----------------------------------------------------------. + |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete | + |-----------------------------------------------------------| + | | | | | | | |Hom|Up |End|Psc|Slk|Pau|Ins | + |-----------------------------------------------------------| + | | | | | | |PgU|Lef|Dow|Rig| | | | + |-----------------------------------------------------------| + | | | | | |Spc|PgD|` |~ | | | | + |-----------------------------------------------------------| + | | | | Fn | | | | | + `-----------------------------------------------------------' + + +### 5. HHKB +[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers. +#### 5.0: Default layer + ,-----------------------------------------------------------. + |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `| + |-----------------------------------------------------------| + |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Bspc | + |-----------------------------------------------------------| + |Ctrl | A| S| D| F| G| H| J| K| L|Fn3| '|Return | + |-----------------------------------------------------------| + |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn | + |-----------------------------------------------------------| + | |Gui |Alt | Space | |Alt |Gui | | + `-----------------------------------------------------------' +#### 5.1: HHKB Fn layer + ,-----------------------------------------------------------. + |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| + |-----------------------------------------------------------| + |Caps | | | | | | | |Psc|Slk|Pus|Up | | | + |-----------------------------------------------------------| + | |VoD|VoU|Mut|Ejc| | *| /|Hom|PgU|Lef|Rig|Enter | + |-----------------------------------------------------------| + | | | | | | | +| -|End|PgD|Dow| | | + |-----------------------------------------------------------| + | | | | | | | | | + `-----------------------------------------------------------' + diff --git a/keyboard/atomic/config.h b/keyboard/atomic/config.h new file mode 100644 index 0000000000..5ea953805f --- /dev/null +++ b/keyboard/atomic/config.h @@ -0,0 +1,70 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Ortholinear Keyboards +#define PRODUCT Atomic Keyboard +#define DESCRIPTION t.m.k. keyboard firmware for Atomic + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/atomic/keymap_common.c b/keyboard/atomic/keymap_common.c new file mode 100644 index 0000000000..fdb1769e1c --- /dev/null +++ b/keyboard/atomic/keymap_common.c @@ -0,0 +1,30 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/keyboard/atomic/keymap_common.h b/keyboard/atomic/keymap_common.h new file mode 100644 index 0000000000..c582c0135f --- /dev/null +++ b/keyboard/atomic/keymap_common.h @@ -0,0 +1,87 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + +// JCK: Semi-Standard layout +#define KEYMAP_JCK( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +// ASK: Short Space layout +#define KEYMAP_ASK_MESSY( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ + K40, K41, K43, K44, K46, K48, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_##K3C, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_NO, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + +#define KEYMAP_ASK( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K41, K43, K44, K46, K47, K48, K4A, K4B, K4C, K4D, K4E \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO, KC_##K0E }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO, KC_##K2E }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO, KC_##K3D, KC_##K3E }, \ + { KC_##K40, KC_##K41, KC_NO, KC_##K43, KC_##K44, KC_NO, KC_##K46, KC_##K47, KC_##K48, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E } \ +} + + +// MLO: Semi-Grid layout + +// KLN: Grid layout + +// PKR: Standard layout + +#endif diff --git a/keyboard/atomic/keymap_plain.c b/keyboard/atomic/keymap_plain.c new file mode 100644 index 0000000000..e7f53649f0 --- /dev/null +++ b/keyboard/atomic/keymap_plain.c @@ -0,0 +1,46 @@ +#include "keymap_common.h" + +// JCK: Semi-Standard layout + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \ + ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, MPLY, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \ + LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT), + [1] = KEYMAP_JCK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, DEL, \ + ESC, A, R, S, T, D, H, N, E, I, O, QUOT, ENT, MPLY, \ + LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \ + LCTL, LALT, LGUI, SPC, FN1, LEFT, DOWN, UP, RGHT), + [2] = KEYMAP_JCK(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, BSPC, \ + TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC, RBRC, BSLS, DEL, \ + ESC, FN3, FN4, TRNS, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, ENT, MPLY, \ + LSFT, FN9, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, VOLD, VOLU, \ + LCTL, LALT, LGUI, SPC, TRNS, MNXT, VOLD, VOLU, MPLY), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +}; diff --git a/keyboard/atomic/keymap_vlad.c b/keyboard/atomic/keymap_vlad.c new file mode 100644 index 0000000000..e56bcf1618 --- /dev/null +++ b/keyboard/atomic/keymap_vlad.c @@ -0,0 +1,14 @@ +#include "keymap_common.h" + +// JCK: Semi-Standard layout + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: qwerty */ + [0] = KEYMAP_ASK(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, \ + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, \ + CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, VOLU, \ + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, VOLD, \ + LCTL, LGUI, LALT, LGUI, SPC, RGUI, RALT, RGUI, RCTL, LEFT, DOWN, RGHT) +}; +const uint16_t PROGMEM fn_actions[] = { +};
\ No newline at end of file diff --git a/keyboard/atomic/led.c b/keyboard/atomic/led.c new file mode 100644 index 0000000000..2d52fbf1c3 --- /dev/null +++ b/keyboard/atomic/led.c @@ -0,0 +1,25 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ +} diff --git a/keyboard/atomic/matrix.c b/keyboard/atomic/matrix.c new file mode 100644 index 0000000000..98102cb694 --- /dev/null +++ b/keyboard/atomic/matrix.c @@ -0,0 +1,211 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 10 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 8 9 10 11 + * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4 + */ + +static void init_cols(void) +{ + DDRC &= ~(1<<6 | 1<<7); + PORTC |= (1<<6 | 1<<7); + DDRD &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTD |= (1<<4 | 1<<5 | 1<<6 | 1<<7); + DDRB &= ~(1<<4 | 1<<5 | 1<<6); + PORTB |= (1<<4 | 1<<5 | 1<<6); + DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); +} + +static matrix_row_t read_cols(void) +{ + return (PINC&(1<<6) ? 0 : (1<< 0)) | + (PINC&(1<<7) ? 0 : (1<< 1)) | + (PIND&(1<<5) ? 0 : (1<< 2)) | + (PIND&(1<<4) ? 0 : (1<< 3)) | + (PIND&(1<<6) ? 0 : (1<< 4)) | + (PIND&(1<<7) ? 0 : (1<< 5)) | + (PINB&(1<<4) ? 0 : (1<< 6)) | + (PINB&(1<<5) ? 0 : (1<< 7)) | + (PINB&(1<<6) ? 0 : (1<< 8)) | + (PINF&(1<<7) ? 0 : (1<< 9)) | + (PINF&(1<<6) ? 0 : (1<<10)) | + (PINF&(1<<5) ? 0 : (1<<11)) | + (PINF&(1<<4) ? 0 : (1<<12)) | + (PINF&(1<<1) ? 0 : (1<<13)) | + (PINF&(1<<0) ? 0 : (1<<14)); +} + +/* Row pin configuration + * row: 0 1 2 3 + * pin: B0 B1 B2 B3 + */ +static void unselect_rows(void) +{ + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7); + PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7); +} + +static void select_row(uint8_t row) +{ + switch (row) { + case 0: + DDRB |= (1<<0); + PORTB &= ~(1<<0); + break; + case 1: + DDRB |= (1<<1); + PORTB &= ~(1<<1); + break; + case 2: + DDRB |= (1<<2); + PORTB &= ~(1<<2); + break; + case 3: + DDRB |= (1<<3); + PORTB &= ~(1<<3); + break; + case 4: + DDRB |= (1<<7); + PORTB &= ~(1<<7); + break; + } +} diff --git a/keyboard/gh60/Makefile b/keyboard/gh60/Makefile index fd202c1792..b48ee3fde6 100644 --- a/keyboard/gh60/Makefile +++ b/keyboard/gh60/Makefile @@ -55,7 +55,7 @@ SRC = keymap_common.c \ ifdef KEYMAP SRC := keymap_$(KEYMAP).c $(SRC) else - SRC := keymap_poker.c $(SRC) + SRC := keymap_planck.c $(SRC) endif CONFIG_H = config.h diff --git a/keyboard/gh60/keymap_common.h b/keyboard/gh60/keymap_common.h index 896badd748..7c95fb8e7c 100644 --- a/keyboard/gh60/keymap_common.h +++ b/keyboard/gh60/keymap_common.h @@ -38,47 +38,15 @@ extern const uint16_t fn_actions[]; * K2C, K31 and K3C are extra keys for ISO */ #define KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K36, K37, K38, K39, K3A, K3B \ ) { \ - { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ } -/* ANSI valiant. No extra keys for ISO */ -#define KEYMAP_ANSI( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ - K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \ - K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \ -) - - -#define KEYMAP_HHKB( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \ - K40, K41, K42, K45, K4A, K4B, K4C, K4D \ -) KEYMAP( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \ - K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ -) - #endif diff --git a/keyboard/gh60/led.c b/keyboard/gh60/led.c index 62abcd79da..7c98510801 100644 --- a/keyboard/gh60/led.c +++ b/keyboard/gh60/led.c @@ -22,13 +22,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. void led_set(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output low - DDRB |= (1<<2); - PORTB &= ~(1<<2); + if (usb_led & (1<<USB_LED_FUNCTION)) { + // Output high. + DDRF |= (1<<0); + PORTF |= (1<<0); } else { - // Hi-Z - DDRB &= ~(1<<2); - PORTB &= ~(1<<2); + // Output low. + DDRF &= ~(1<<0); + PORTF &= ~(1<<0); } } diff --git a/keyboard/gh60/matrix.c b/keyboard/gh60/matrix.c index a61215152c..720ac30043 100644 --- a/keyboard/gh60/matrix.c +++ b/keyboard/gh60/matrix.c @@ -22,6 +22,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <stdbool.h> #include <avr/io.h> #include <util/delay.h> +#include "action_layer.h" #include "print.h" #include "debug.h" #include "util.h" @@ -29,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifndef DEBOUNCE -# define DEBOUNCE 5 +# define DEBOUNCE 10 #endif static uint8_t debouncing = DEBOUNCE; @@ -94,6 +95,19 @@ uint8_t matrix_scan(void) } } + uint8_t layer = biton32(layer_state); + switch (layer) { + case 1: + case 2: + DDRC |= (1<<7); + PORTC |= (1<<7); + break; + case 0: + DDRC &= ~(1<<7); + PORTC &= ~(1<<7); + break; + } + return 1; } @@ -135,77 +149,67 @@ uint8_t matrix_key_count(void) } /* Column pin configuration - * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - * pin: F0 F1 E6 C7 C6 B6 D4 B1 B0 B5 B4 D7 D6 B3 (Rev.A) - * pin: B7 (Rev.B) + * col: 0 1 2 3 4 5 6 7 8 9 10 11 + * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4 */ -static void init_cols(void) + +static void init_cols(void) { - // Input with pull-up(DDR:0, PORT:1) - DDRF &= ~(1<<0 | 1<<1); - PORTF |= (1<<0 | 1<<1); - DDRE &= ~(1<<6); - PORTE |= (1<<6); - DDRD &= ~(1<<7 | 1<<6 | 1<<4); - PORTD |= (1<<7 | 1<<6 | 1<<4); - DDRC &= ~(1<<7 | 1<<6); - PORTC |= (1<<7 | 1<<6); - DDRB &= ~(1<<7 | 1<<6 | 1<< 5 | 1<<4 | 1<<3 | 1<<1 | 1<<0); - PORTB |= (1<<7 | 1<<6 | 1<< 5 | 1<<4 | 1<<3 | 1<<1 | 1<<0); + DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + DDRD &= ~(1<<0); + PORTD |= (1<<0); + DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7); + PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7); } static matrix_row_t read_cols(void) { - return (PINF&(1<<0) ? 0 : (1<<0)) | - (PINF&(1<<1) ? 0 : (1<<1)) | - (PINE&(1<<6) ? 0 : (1<<2)) | - (PINC&(1<<7) ? 0 : (1<<3)) | - (PINC&(1<<6) ? 0 : (1<<4)) | - (PINB&(1<<6) ? 0 : (1<<5)) | - (PIND&(1<<4) ? 0 : (1<<6)) | - (PINB&(1<<1) ? 0 : (1<<7)) | - ((PINB&(1<<0) && PINB&(1<<7)) ? 0 : (1<<8)) | // Rev.A and B - (PINB&(1<<5) ? 0 : (1<<9)) | - (PINB&(1<<4) ? 0 : (1<<10)) | - (PIND&(1<<7) ? 0 : (1<<11)) | - (PIND&(1<<6) ? 0 : (1<<12)) | - (PINB&(1<<3) ? 0 : (1<<13)); + return (PINB&(1<<0) ? 0 : (1<< 0)) | + (PINB&(1<<1) ? 0 : (1<< 1)) | + (PINB&(1<<2) ? 0 : (1<< 2)) | + (PINB&(1<<3) ? 0 : (1<< 3)) | + (PINB&(1<<7) ? 0 : (1<< 4)) | + (PIND&(1<<0) ? 0 : (1<< 5)) | + (PINF&(1<<7) ? 0 : (1<< 6)) | + (PINF&(1<<6) ? 0 : (1<< 7)) | + (PINF&(1<<5) ? 0 : (1<< 8)) | + (PINF&(1<<4) ? 0 : (1<< 9)) | + (PINF&(1<<1) ? 0 : (1<<10)) | + (PINF&(1<<0) ? 0 : (1<<11)); } /* Row pin configuration - * row: 0 1 2 3 4 - * pin: D0 D1 D2 D3 D5 + * row: 0 1 2 3 + * pin: B0 B1 B2 B3 */ static void unselect_rows(void) { // Hi-Z(DDR:0, PORT:0) to unselect - DDRD &= ~0b00101111; - PORTD &= ~0b00101111; + DDRB &= ~0b01110000; + PORTB &= ~0b01110000; + DDRD &= ~0b10000000; + PORTD &= ~0b10000000; } static void select_row(uint8_t row) { - // Output low(DDR:1, PORT:0) to select switch (row) { case 0: - DDRD |= (1<<0); - PORTD &= ~(1<<0); + DDRB |= (1<<6); + PORTB &= ~(1<<6); break; case 1: - DDRD |= (1<<1); - PORTD &= ~(1<<1); + DDRB |= (1<<5); + PORTB &= ~(1<<5); break; case 2: - DDRD |= (1<<2); - PORTD &= ~(1<<2); + DDRB |= (1<<4); + PORTB &= ~(1<<4); break; case 3: - DDRD |= (1<<3); - PORTD &= ~(1<<3); - break; - case 4: - DDRD |= (1<<5); - PORTD &= ~(1<<5); + DDRD |= (1<<7); + PORTD &= ~(1<<7); break; } } diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile new file mode 100644 index 0000000000..001f17f316 --- /dev/null +++ b/keyboard/planck/Makefile @@ -0,0 +1,136 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = planck_lufa + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c \ + backlight.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_jack.c $(SRC) +endif + +CONFIG_H = config.h + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/keyboard/planck/Makefile.pjrc b/keyboard/planck/Makefile.pjrc new file mode 100644 index 0000000000..be83ba18b1 --- /dev/null +++ b/keyboard/planck/Makefile.pjrc @@ -0,0 +1,116 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = gh60_pjrc + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap_common.c \ + matrix.c \ + led.c + +ifdef KEYMAP + SRC := keymap_$(KEYMAP).c $(SRC) +else + SRC := keymap_jack.c $(SRC) +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover(+500) +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + +include $(TOP_DIR)/protocol/pjrc.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk + +plain: OPT_DEFS += -DKEYMAP_PLAIN +plain: all + +poker: OPT_DEFS += -DKEYMAP_POKER +poker: all + +poker_set: OPT_DEFS += -DKEYMAP_POKER_SET +poker_set: all + +poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT +poker_bit: all diff --git a/keyboard/planck/README.md b/keyboard/planck/README.md new file mode 100644 index 0000000000..cb009c005d --- /dev/null +++ b/keyboard/planck/README.md @@ -0,0 +1,24 @@ +Planck keyboard firmware +====================== +DIY/Assembled compact ortholinear keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com). + +## Notable TMK forks (which some of the keymap files are from) +- [Shane's Fork](https://github.com/shanecelis/tmk_keyboard/tree/master/keyboard/planck) +- [Pierre's Fork](https://github.com/pcarrier/tmk_keyboard/blob/pcarrier/planck/keyboard/gh60/keymap_planck.c) +- [Nathan's Fork](https://github.com/nathanrosspowell/tmk_keyboard/tree/planck-jack/keyboard/planck) +- [Matthew's Fork](https://github.com/pepers/tmk_keyboard/tree/master/keyboard/planck_grid) + +## Build +Move to this directory then just run `make` like: + + $ make + +Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now. + + +## Keymap +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files. + +To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like: + + $ make KEYMAP=[<name>] diff --git a/keyboard/planck/backlight.c b/keyboard/planck/backlight.c new file mode 100644 index 0000000000..ee7e31ee9c --- /dev/null +++ b/keyboard/planck/backlight.c @@ -0,0 +1,46 @@ + +#include <avr/io.h> +#include "backlight.h" + + +void backlight_init_ports() +{ + // Setup PB7 as output and output low. + DDRB |= (1<<7); + PORTB &= ~(1<<7); + + // Use full 16-bit resolution. + ICR1 = 0xFFFF; + + // I could write a wall of text here to explain... but TL;DW + // Go read the ATmega32u4 datasheet. + // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on + + // Pin PB7 = OCR1C (Timer 1, Channel C) + // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 + // (i.e. start high, go low when counter matches.) + // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0 + // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1 + + TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010; + TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; + + // Default to zero duty cycle. + OCR1C = 0x0000; +} + +void backlight_set(uint8_t level) +{ + if ( level == 0 ) + { + // Turn off PWM control on PB7, revert to output low. + TCCR1A &= ~(_BV(COM1C1)); + } + else + { + // Turn on PWM control of PB7 + TCCR1A |= _BV(COM1C1); + OCR1C = level << 12 | 0x0FFF; + } +} + diff --git a/keyboard/planck/backlight.h b/keyboard/planck/backlight.h new file mode 100644 index 0000000000..0fe1f4a72b --- /dev/null +++ b/keyboard/planck/backlight.h @@ -0,0 +1,2 @@ + +void backlight_init_ports(void); diff --git a/keyboard/planck/config.h b/keyboard/planck/config.h new file mode 100644 index 0000000000..0b0c152479 --- /dev/null +++ b/keyboard/planck/config.h @@ -0,0 +1,74 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER jackhumbert +#define PRODUCT Planck +#define DESCRIPTION t.m.k. keyboard firmware for the Planck + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */ +#define BACKLIGHT_LEVELS 15 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/planck/keymap_brett.c b/keyboard/planck/keymap_brett.c new file mode 100644 index 0000000000..97d832b47a --- /dev/null +++ b/keyboard/planck/keymap_brett.c @@ -0,0 +1,42 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, + TAB, LGUI, RSFT, LALT, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, + TRNS, F1, F2, F3, F4, F5, F6, 4, 5, 6, QUOT, TRNS, + TRNS, F7, F8, F9, F10, F11, F12, 1, 2, 3, TRNS, PGUP, + MPRV, MNXT, TRNS, MUTE, TRNS, TRNS, FN1, 0, 0, TRNS, PGDN), +[2] = KEYMAP( /* LOWER */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, + TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + MPLY, MSTP, VOLU, VOLD, FN2, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboard/planck/keymap_common.c b/keyboard/planck/keymap_common.c new file mode 100644 index 0000000000..fdb1769e1c --- /dev/null +++ b/keyboard/planck/keymap_common.c @@ -0,0 +1,30 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include "keymap_common.h" + + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) }; +} diff --git a/keyboard/planck/keymap_common.h b/keyboard/planck/keymap_common.h new file mode 100644 index 0000000000..8a55fd9ee0 --- /dev/null +++ b/keyboard/planck/keymap_common.h @@ -0,0 +1,64 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#ifndef KEYMAP_COMMON_H +#define KEYMAP_COMMON_H + +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; +extern const uint16_t fn_actions[]; + + +// MIT Layout +#define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K37, K38, K39, K3A, K3B \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_NO, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ +} + +// Grid Layout +#define KEYMAP_GRID( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ +} + + +#endif diff --git a/keyboard/planck/keymap_dotcom.c b/keyboard/planck/keymap_dotcom.c new file mode 100644 index 0000000000..347f6dea91 --- /dev/null +++ b/keyboard/planck/keymap_dotcom.c @@ -0,0 +1,34 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + FN1, A, S, D, F, G, H, J, K, L, SCLN, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, LBRC, + LCTL, BSLS, QUOT, LALT, FN22, SPC, LEFT, UP, DOWN, RGHT, RBRC), +[1] = KEYMAP( + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, + TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, TRNS, TRNS, TRNS, + TRNS, FN18, FN19, FN22, EQL, MINS, FN20, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, TRNS, VOLD, VOLU, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +}; diff --git a/keyboard/planck/keymap_jack.c b/keyboard/planck/keymap_jack.c new file mode 100644 index 0000000000..c74812121f --- /dev/null +++ b/keyboard/planck/keymap_jack.c @@ -0,0 +1,50 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Jack */ + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + ESC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + RSFT, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Jack colemak */ + TAB, Q, W, F, P, G, J, L, U, Y, SCLN, BSPC, + ESC, A, R, S, T, D, H, N, E, I, O, QUOT, + LSFT, Z, X, C, V, B, K, M, COMM, DOT, SLSH, ENT, + FN3, LCTL, LALT, LGUI, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[2] = KEYMAP( /* Jack RAISE */ + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC, + TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL, LBRC, RBRC, BSLS, + TRNS, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY), +[3] = KEYMAP( /* Jack LOWER */ + FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, + TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboard/planck/keymap_joe.c b/keyboard/planck/keymap_joe.c new file mode 100644 index 0000000000..07122b702c --- /dev/null +++ b/keyboard/planck/keymap_joe.c @@ -0,0 +1,107 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Joe colemak */ + ESC, Q, W, F, P, G, J, L, U, Y, SCLN, MINS, + BSPC, A, R, S, T, D, H, N, E, I, O, ENT, + TAB, Z, X, C, V, B, K, M, COMM, DOT, SLSH, QUOT, + LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Joe qwerty */ + ESC, Q, W, E, R, T, Y, U, I, O, P, MINS, + BSPC, A, S, D, F, G, H, J, K, L, SCLN, ENT, + TAB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, QUOT, + LCTL, LGUI, LALT, LSFT, FN1, SPC, FN0, LEFT, DOWN, UP, RGHT), +[2] = KEYMAP( /* Joe RAISE */ + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + DEL, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS, + BSLS, FN5, FN6, TRNS, TRNS, MENU, CAPS, INS, PSCR, LBRC, RBRC, FN21, + TRNS, TRNS, TRNS, TRNS, FN2, TRNS, FN0, FN26, FN27, FN28, FN29), +[3] = KEYMAP( /* Joe LOWER */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN7, FN8, FN9, FN30, FN31, + DEL, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, + FN25, FN3, FN4, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN23, FN24, EQL, + TRNS, TRNS, TRNS, TRNS, FN1, TRNS, FN2, HOME, PGDN, PGUP, END), +[4] = KEYMAP( /* Joe LOWER + RAISE */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), +}; + +enum macro_id { + M_Q0, + M_Q1, + M_Q2, + M_Q3, + M_Q4 +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [1] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(4), // to Fn overlay + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [5] = ACTION_MODS_KEY(MOD_LCTL, KC_PGDN), + [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PGUP), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [7] = ACTION_MACRO(M_Q0), + [8] = ACTION_MACRO(M_Q1), + [9] = ACTION_MACRO(M_Q2), + [30] = ACTION_MACRO(M_Q3), + [31] = ACTION_MACRO(M_Q4), + + [26] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_LEFT), + [27] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_DOWN), + [28] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_UP), + [29] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_RGHT), + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + switch (id) { + case M_Q0: + return event.pressed ? + MACRO( D(LSFT), T(SCLN), U(LSFT), T(SLSH), END ) : + MACRO_NONE; + case M_Q1: + return event.pressed ? + MACRO( D(LSFT), T(SCLN), T(9), U(LSFT), END ) : + MACRO_NONE; + case M_Q2: + return event.pressed ? + MACRO( D(LSFT), T(0), T(SCLN), U(LSFT), END ) : + MACRO_NONE; + case M_Q3: + return event.pressed ? + MACRO( D(LSFT), T(9), T(SCLN), U(LSFT), END ) : + MACRO_NONE; + case M_Q4: + return event.pressed ? + MACRO( D(LSFT), T(SCLN), T(0), U(LSFT), END ) : + MACRO_NONE; + + } + return MACRO_NONE; +}
\ No newline at end of file diff --git a/keyboard/planck/keymap_matthew.c b/keyboard/planck/keymap_matthew.c new file mode 100644 index 0000000000..56e7003a97 --- /dev/null +++ b/keyboard/planck/keymap_matthew.c @@ -0,0 +1,70 @@ +// by Matthew Pepers - https://github.com/pepers + +/* grid planck layout - modified programmer dvorak +,-----------------------------------------------------------------------------------------------. +| pause | @ | | | ^ | | | | | * | # | $ | del | +| esc | ; : | , < | . > | P | Y | F | G | G | C | R | bkspc | +| F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | +|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| +| & | / | { | ( | [ | = | ! | ] | ) | } | \ | + | +| ` ~ | A | O | E | U | I | D | H | T | N | S | - _ | +| % | 7 | 5 | 3 | 1 | 9 | 0 | 2 | 4 | 6 | 8 | ? | +|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| +| | | | | | | | | | | | prtsc | +| tab | ' " | Q | J | K | X | B | M | W | V | Z | retrn | +| | | | | | | | | | | | insrt | +|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------| +| | | | | | | | | | | | | +| lctrl | lgui | lalt | ralt | lower | shift | space | raise | left | down | up | right | +| | | | | | | | | home | pgdn | pgup | end | +`-----------------------------------------------------------------------------------------------' +*/ + +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: dvorak */ + [0] = KEYMAP_GRID( ESC, SCLN, COMM, DOT, P, Y, F, G, C, R, L, BSPC, \ + GRV, A, O, E, U, I, D, H, T, N, S, MINS, \ + TAB, QUOT, Q, J, K, X, B, M, W, V, Z, ENT, \ + LCTL, LGUI, LALT, RALT, FN1, LSFT, SPC, FN2, LEFT, DOWN, UP, RGHT), + + /* 1: lower (FN1) */ + [1] = KEYMAP_GRID( F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, \ + FN17, 7, 5, 3, 1, 9, 0, 2, 4, 6, 8, FN18, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, INS, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END), + + /* 2: raise (FN2) */ + [2] = KEYMAP_GRID(PAUS, FN19, FN20, FN21, TRNS, TRNS, TRNS, TRNS, FN22, FN23, FN24, DEL, \ + FN10, SLSH, FN11, FN12, LBRC, EQL, FN13, RBRC, FN14, FN15, BSLS, FN16, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, \ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // lower Fn layer + [2] = ACTION_LAYER_MOMENTARY(2), // raise Fn layer + + // lower row1 + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH), // ? + + // raise row0 + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLASH), // | + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ + + // raise row1 + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRACKET), // { + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRACKET), // } + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_EQUAL), // + +}; diff --git a/keyboard/planck/keymap_nathan.c b/keyboard/planck/keymap_nathan.c new file mode 100644 index 0000000000..47539188ed --- /dev/null +++ b/keyboard/planck/keymap_nathan.c @@ -0,0 +1,180 @@ +// Author: Nathan Ross Powell <nathanrospowell@gmail.com> +// https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c + +#include "keymap_common.h" + +#ifndef KEYMAP_GRID + /* Planck keymap definition macro for the 'grid' layout + * ,-----------------------------------------------------------------------. + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * |-----------------------------------------------------------------------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------' + */ +#define KEYMAP_GRID( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B } \ +} +#endif + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: main layer + * ,-----------------------------------------------------------------------. + * |Tab | q | w | e | r | t | y | u | i | o | p | BS | + * |-----------------------------------------------------------------------| + * |Ctrl | a | s | d | f | g | h | j | k | l | ; | Ret | + * |-----------------------------------------------------------------------| + * |Shift| z | x | c | v | b | n | m | [ | ( | { | < | + * |-----------------------------------------------------------------------| + * |Meta | \ | / | Alt |Lower|Space|Space|Upper|Left |Down | Up |Right| + * `-----------------------------------------------------------------------' + */ + [0] = KEYMAP_GRID( + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, ENT, + RSFT, Z, X, C, V, B, N, M, LBRC, FN10, FN11, FN12, + LGUI, BSLS, SLSH, LALT, FN0, SPC, SPC, FN1, LEFT, DOWN, UP, RGHT), + + /* 1: fn left/lower layer + * The top row are Visual Studio combos: + * 'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line' + * 2nd row are key combos: + * 'ctrl-alt-delete', 'ctrl-shift-escape' + * 3rd row are macros keys: + * 'P0' - 'P5' execute a script on Windows machines + * ,-----------------------------------------------------------------------. + * | ESC | F5 | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del | + * |-----------------------------------------------------------------------| + * | |C/A/D|C/S/E| Ins |Print|Pause|SLock|Num0 |Num4 |Num5 |Num6 |Num= | + * |-----------------------------------------------------------------------| + * | | P0 | P1 | P2 | P3 | P4 | P5 |Num. |Num1 |Num2 |Num3 |Num/ | + * |-----------------------------------------------------------------------| + * | |User | | | | | | |Home |PgDn |PgUp | End | + * `-----------------------------------------------------------------------' + */ + [1] = KEYMAP_GRID( + ESC, F5, F9, F10, F11, FN30, FN31, NLCK, P7, P8, P9, DEL, + TRNS, FN16, FN17, INS, PSCR, PAUS, SLCK, P0, P4, P5, P6, PEQL, + TRNS, FN2, FN3, FN4, FN5, FN6, FN7, PDOT, P1, P2, P3, PSLS, + TRNS, FN8, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END ), + + /* 2: fn right/raise layer + * ,-----------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 |F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-----------------------------------------------------------------------| + * | | ! | @ | # | $ | % | ^ | & | * | - | + | = | + * |-----------------------------------------------------------------------| + * | | _ | ' | " | ` | ~ | , | . | ] | ) | } | > | + * |-----------------------------------------------------------------------| + * | |NextT|PrevT| | | | Esc | |Mute |Vol- |Vol+ | P/P | + * `-----------------------------------------------------------------------' + */ + [2] = KEYMAP_GRID( + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + TRNS, FN18, FN19, FN20, FN21, FN22, FN23, FN24, FN25, MINS, FN26, PAST, + TRNS, FN27, QUOT, FN28, GRV, FN29, COMM, DOT, RBRC, FN13, FN14, FN15, + TRNS, MNXT, MPRV, TRNS, TRNS, TRNS, ESC, TRNS, MUTE, VOLD, VOLU, MPLY ), +}; + +enum macro_id { + M_P0, + M_P1, + M_P2, + M_P3, + M_P4, + M_P5, + M_USERNAME +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_LAYER_MOMENTARY(1), // left/lower layer + [1] = ACTION_LAYER_MOMENTARY(2), // right/raise layer + // Program macros + [2] = ACTION_MACRO(M_P0), + [3] = ACTION_MACRO(M_P1), + [4] = ACTION_MACRO(M_P2), + [5] = ACTION_MACRO(M_P3), + [6] = ACTION_MACRO(M_P4), + [7] = ACTION_MACRO(M_P5), + [8] = ACTION_MACRO(M_USERNAME), + // Braces + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // < + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // { + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // > + // Combo + [16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete + [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_ESC), // Ctrl+Shft+Escape + // Symbols + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + + [27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _ + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // " + [29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~ + // Debugging + [30] = ACTION_MODS_KEY(MOD_LSFT, KC_F11), // Step into + [31] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F10), // Set cursor to line + }; + +// Run a script and pass a key number to it. This is Windows specific and the script needs to be on your path. +// *open run dialog* keypress.py [PRG_NUM] +#define ADD_PYTHON_PROGRAM_ON_WIN( PRG_NUM ) MACRO( D(LGUI), T(R), U(LGUI), W(100), T(K), T(E), T(Y), T(P), T(R), T(E), T(S), T(S), T(DOT), T(P), T(Y), T(SPC), T(PRG_NUM), END ) +// *return* +#define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END ) + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + switch (id) { + case M_P0: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 0 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P1: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 1 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P2: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 2 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P3: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 3 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P4: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 4 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_P5: + return event.pressed ? + ADD_PYTHON_PROGRAM_ON_WIN( 5 ) : + RUN_PYTHON_PROGRAM_ON_WIN; + case M_USERNAME: + return event.pressed ? + MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) : + MACRO_NONE; + + } + return MACRO_NONE; +} diff --git a/keyboard/planck/keymap_peasant.c b/keyboard/planck/keymap_peasant.c new file mode 100644 index 0000000000..ddacb614e6 --- /dev/null +++ b/keyboard/planck/keymap_peasant.c @@ -0,0 +1,51 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Native */ + ESC, Q, W, E, R, T, Y, U, I, O, P, FN2, + BSPC, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + TAB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + DEL, LCTL, NO, LSFT, LALT, SPC, NO, LEFT, DOWN, UP, RGHT), + [1] = KEYMAP( /* QWERTY->PHOTOSHOP */ + DELETE, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, FN1, + O, G, S, U, T, FN27, F21, F10, F11, F7, F8, F9, + TAB, FN4, FN5, FN6, F1, FN7, F18, F19, F23, F20, F22, FN9, + COMM, DOT, FN10, FN11, FN3, SPC, FN12, F2, FN8, F3, F14), + [2] = KEYMAP( /* 2: FN3 PHOTOSHOP */ + ESC, FN25, FN26, NO, NO, NO, NO, NO, NO, NO, NO, NO, + NO, NO, NO, NO, NO, NO, NO, NO, NO, FN19, FN20, FN21, + C, NO, FN22, FN5, NO, FN23, NO, NO, NO, NO, FN13, NO, + FN14, FN15, FN16, FN17, FN3, SPC, FN18, NO, NO, F24, NO), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_DEFAULT_LAYER_SET(0), // set Qwerty layout + [2] = ACTION_DEFAULT_LAYER_SET(1), // set Photoshop presets + [3] = ACTION_LAYER_ON_OFF(2), // Photoshop function layer + + [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9), // photo folder AHK + [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I), // select inverse + [6] = ACTION_MODS_KEY(MOD_LSFT, KC_M), // marquee select + [7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC), // fill + [8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X), // warp + [9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12), // merge all new layer + [10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS), // zoom out + [11] = ACTION_MODS_KEY(MOD_LCTL, KC_H), // RBG sliders + [12] = ACTION_MODS_KEY(MOD_LCTL, KC_S), // save + [13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5), // layer mask from transparancy + [14] = ACTION_MODS_KEY(MOD_LALT, KC_LBRC), // prev layer + [15] = ACTION_MODS_KEY(MOD_LALT, KC_RBRC), // next layer + [16] = ACTION_MODS_KEY(MOD_LCTL, KC_EQL), // zoom in + [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H), // HSV sliders + [18] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F11), // save as PNG + [19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7), // gaussian blur + [20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8), // motion blur + [21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X), // liquify filter + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // prev layer blending + [23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LALT, KC_N), // normal layer blending + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // next layer blending + [25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z), // step back + [26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y), // step forward + [27] = ACTION_MODS_KEY(MOD_LCTL, KC_R), // rasterize + +}; diff --git a/keyboard/planck/keymap_sean.c b/keyboard/planck/keymap_sean.c new file mode 100644 index 0000000000..9ad572a72c --- /dev/null +++ b/keyboard/planck/keymap_sean.c @@ -0,0 +1,50 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP( /* Matrix Dvorak */ + QUOT, COMM, DOT, P, Y, SLSH, EQL, F, G, C, R, L, + A, O, E, U, I, ESC, BSPC, D, H, T, N, S, + SCLN, Q, J, K, X, TAB, ENT, B, M, W, V, Z, + LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + + [1] = KEYMAP( /* Matrix Qwerty */ + Q, W, E, R, T, SLSH, EQL, Y, U, I, O, P, + A, S, D, F, G, ESC, BSPC, H, J, K, L, SCLN, + Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH, + LSFT, LCTL, LALT, LGUI, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), + + [2] = KEYMAP( /* fn1 lower */ + F1, F2, F3, F4, F5, TRNS, TRNS, F6, F7, F8, F9, F10, + 1, 2, 3, 4, 5, ESC, DEL, 6, 7, 8, 9, 0, + FN3, FN4, TRNS, GRV, MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, HOME, PGDN, PGUP, END), + + [3] = KEYMAP( /* fn2 raise */ + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + FN10, FN11, FN12, FN13, FN14, ESC, DEL, FN15, FN16, FN17, FN18, FN19, + FN3, FN4, TRNS, FN22, FN20, TRNS, TRNS, FN28, FN23, FN24, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, MNXT, VOLD, VOLU, MPLY), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(3), // to Fn overlay + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +};
\ No newline at end of file diff --git a/keyboard/planck/keymap_shane.c b/keyboard/planck/keymap_shane.c new file mode 100644 index 0000000000..d4e40fe63a --- /dev/null +++ b/keyboard/planck/keymap_shane.c @@ -0,0 +1,100 @@ +// https://github.com/shanecelis/tmk_keyboard/blob/master/keyboard/planck/keymap_shane.c + +#include "keymap_common.h" +#include "action_layer.h" +#include "action.h" +#include "action_util.h" + +/* + Shane's Planck Layout + http://www.keyboard-layout-editor.com/#/layouts/015d9011102619d7695c86ffe57cf441 +*/ +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = KEYMAP_AND_SWAP( /* Base */ + TAB, Q, W, E, R, T, Y, U, I, O, P, MINS, + LCTL, A, S, D, F, G, H, J, K, L, SCLN, BSPC, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, FN5, + /*ALPHA*/FN3, /*HYPER*/ /*SUPER*/LGUI, /*META*/LALT, LCTL, FN2, FN6, FN1, LEFT, DOWN, UP, RGHT), + [2] = KEYMAP_AND_SWAP( /* More modifiers */ + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, RCTL, RALT, RGUI, TRNS), + [4] = KEYMAP_AND_SWAP( /* WASD */ + TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, LEFT, DOWN, RIGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), + [6] = KEYMAP_AND_SWAP( /* Raise/FN1 */ + FN23, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, EQL, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ENT, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, BSLS, TRNS, + PAUS, TRNS, TRNS, TRNS, TRNS, BSPC, TRNS, MUTE, PGUP, PGDN, MNXT), + [8] = KEYMAP_AND_SWAP( /* Lower/FN2 */ + ESC, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN19, FN20, TRNS, + TRNS, TRNS, TRNS, TRNS, CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN24, FN25, LBRC, RBRC, TRNS, TRNS, + FN4, TRNS, TRNS, TRNS, TRNS, ENT, TRNS, MPLY, VOLD, VOLU, MPRV), +}; + +enum function_id { + SPACE_FN, +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch (id) { + case SPACE_FN: + if (record->event.pressed) { + // Change the keyboard maps. + // Whatever even layer's are on, turn on the odd one's too. + for (uint8_t i = 0; i < 9; i += 2) { + if (layer_state & (1UL << i)) + layer_on(i + 1); + } + layer_on(1); + } else { + // turn off all the even layers. + for (uint8_t i = 0; i < 9; i += 2) + layer_off(i + 1); + + if (record->tap.count != 0) { + // Space was tapped rather than used like a modifier. + // So send a space up and down event. + add_key(KC_SPC); + send_keyboard_report(); + del_key(KC_SPC); + send_keyboard_report(); + } + } + break; + } +} + + + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(6), // to fist Fn overlay + [2] = ACTION_LAYER_MOMENTARY(8), // to second Fn overlay + [3] = ACTION_LAYER_TOGGLE(2), // toggle more modifiers + [4] = ACTION_LAYER_TOGGLE(4), // toggle wasd + [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT), + [6] = ACTION_FUNCTION_TAP(SPACE_FN), + + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [26] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), +}; diff --git a/keyboard/planck/keymap_simon.c b/keyboard/planck/keymap_simon.c new file mode 100644 index 0000000000..37951364be --- /dev/null +++ b/keyboard/planck/keymap_simon.c @@ -0,0 +1,44 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Jack */ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, DOT, ENT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SCLN, DEL, + LCTL, ENT, LALT, CAPS, FN2, SPC, FN1, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Jack RAISE */ + TRNS, F1, F2, F3, F4, NO, FN11, FN9, FN12, NO, FN14, TRNS, + TRNS, F5, F6, F7, F8, FN16, SLSH, MINS, EQL, LBRC, FN8, TRNS, + TRNS, F9, F10, F11, F12, F15, F16, FN22, SCLN, MINS, QUOT, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +[2] = KEYMAP( /* Jack LOWER */ + FN22, 1, 2, 3, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC, + TRNS, 4, 5, 6, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28, + TRNS, 7, 8, 9, 0, FN28, FN15, F7, F8, F9, F10, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay + [2] = ACTION_LAYER_MOMENTARY(2), // to Fn overlay + + [8] = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH), + [9] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT), + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), + [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), + + [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), +}; diff --git a/keyboard/planck/keymap_wilba.c b/keyboard/planck/keymap_wilba.c new file mode 100644 index 0000000000..9781f8fcd8 --- /dev/null +++ b/keyboard/planck/keymap_wilba.c @@ -0,0 +1,56 @@ +#include "keymap_common.h" + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( /* Wilba */ + FN27, FN28, FN29, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), +[1] = KEYMAP( /* Wilba Alternate */ + ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC, + TAB, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + LCTL, LGUI, LALT, RSFT, FN1, SPC, FN2, LEFT, DOWN, UP, RGHT), +[2] = KEYMAP( /* Wilba LOWER */ + TRNS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, TRNS, + TRNS, F11, F12, LBRC, RBRC, FN20, EQL, FN23, FN24, MINS, FN21, TRNS, + TRNS, BSLS, GRV, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, FN1, TRNS, TRNS, MNXT, VOLD, VOLU, MPLY), +[3] = KEYMAP( /* Wilba RAISE */ + TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS, + TRNS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, TRNS, + TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, + TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN2, TRNS, TRNS, TRNS, TRNS), +}; +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_MOMENTARY(2), // LOWER + [2] = ACTION_LAYER_MOMENTARY(3), // RAISE + + [3] = ACTION_DEFAULT_LAYER_SET(0), + [4] = ACTION_DEFAULT_LAYER_SET(1), + + [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // ! + [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @ + [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // # + [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $ + [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // % + [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^ + [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // & + [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // * + [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // ( + [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // ) + + [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _ + [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // + + [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~ + [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // { + [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // } + [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // | + + [26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE), + + [27] = ACTION_BACKLIGHT_TOGGLE(), + [28] = ACTION_BACKLIGHT_INCREASE(), + [29] = ACTION_BACKLIGHT_DECREASE() + +}; diff --git a/keyboard/planck/led.c b/keyboard/planck/led.c new file mode 100644 index 0000000000..1f36434883 --- /dev/null +++ b/keyboard/planck/led.c @@ -0,0 +1,38 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + // Using PE6 Caps Lock LED + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + { + // Output high. + DDRE |= (1<<6); + PORTE |= (1<<6); + } + else + { + // Output low. + DDRE &= ~(1<<6); + PORTE &= ~(1<<6); + } +} diff --git a/keyboard/planck/matrix-handwire.c b/keyboard/planck/matrix-handwire.c new file mode 100644 index 0000000000..2f2dbdb108 --- /dev/null +++ b/keyboard/planck/matrix-handwire.c @@ -0,0 +1,193 @@ +/* +Copyright 2012 Jun Wako +Generated by planckkeyboard.com (2014 Jack Humbert) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 10 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +static void init_cols(void) +{ + DDRB &= ~(1<<6 | 1<<5 | 1<<4); + PORTB |= (1<<6 | 1<<5 | 1<<4); + DDRD &= ~(1<<7 | 1<<6 | 1<<4); + PORTD |= (1<<7 | 1<<6 | 1<<4); + DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + +} + +static matrix_row_t read_cols(void) +{ + return (PIND&(1<<4) ? 0 : (1<<0)) | + (PIND&(1<<6) ? 0 : (1<<1)) | + (PIND&(1<<7) ? 0 : (1<<2)) | + (PINB&(1<<4) ? 0 : (1<<3)) | + (PINB&(1<<5) ? 0 : (1<<4)) | + (PINB&(1<<6) ? 0 : (1<<5)) | + (PINF&(1<<7) ? 0 : (1<<6)) | + (PINF&(1<<6) ? 0 : (1<<7)) | + (PINF&(1<<5) ? 0 : (1<<8)) | + (PINF&(1<<4) ? 0 : (1<<9)) | + (PINF&(1<<1) ? 0 : (1<<10)) | + (PINF&(1<<0) ? 0 : (1<<11)); + +} + +static void unselect_rows(void) +{ + DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3); + PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3); + +} + +static void select_row(uint8_t row) +{ + switch (row) { + case 0: + DDRB |= (1<<0); + PORTB &= ~(1<<0); + break; + case 1: + DDRB |= (1<<1); + PORTB &= ~(1<<1); + break; + case 2: + DDRB |= (1<<2); + PORTB &= ~(1<<2); + break; + case 3: + DDRB |= (1<<3); + PORTB &= ~(1<<3); + break; + + } +} diff --git a/keyboard/planck/matrix.c b/keyboard/planck/matrix.c new file mode 100644 index 0000000000..e3926caece --- /dev/null +++ b/keyboard/planck/matrix.c @@ -0,0 +1,219 @@ +/* +Copyright 2012 Jun Wako +Generated by planckkeyboard.com (2014 Jack Humbert) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "backlight.h" // TODO fix this dependency + + +#ifndef DEBOUNCE +# define DEBOUNCE 10 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + // To use PORTF disable JTAG with writing JTD bit twice within four cycles. + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); + + // TODO fix this dependency + backlight_init_ports(); + + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +// +// Planck PCB Rev 1 Pin Assignments +// +// Column: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 +// Pin: F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 +// + +static void init_cols(void) +{ + DDRB &= ~(1<<4 | 1<<0); + PORTB |= (1<<4 | 1<<0); + DDRC &= ~(1<<7); + PORTC |= (1<<7); + DDRD &= ~(1<<7 | 1<<6 | 1<<4); + PORTD |= (1<<7 | 1<<6 | 1<<4); + DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7); + +} + +static matrix_row_t read_cols(void) +{ + return (PINF&(1<<1) ? 0 : (1<<0)) | + (PINF&(1<<0) ? 0 : (1<<1)) | + (PINB&(1<<0) ? 0 : (1<<2)) | + (PINC&(1<<7) ? 0 : (1<<3)) | + (PINF&(1<<4) ? 0 : (1<<4)) | + (PINF&(1<<5) ? 0 : (1<<5)) | + (PINF&(1<<6) ? 0 : (1<<6)) | + (PINF&(1<<7) ? 0 : (1<<7)) | + (PIND&(1<<4) ? 0 : (1<<8)) | + (PIND&(1<<6) ? 0 : (1<<9)) | + (PINB&(1<<4) ? 0 : (1<<10)) | + (PIND&(1<<7) ? 0 : (1<<11)); + +} + +static void unselect_rows(void) +{ + DDRB &= ~(1<<5 | 1<<6); + PORTB |= (1<<5 | 1<<6); + DDRD &= ~(1<<0 | 1<<5); + PORTD |= (1<<0 | 1<<5); + +} + +// +// Planck PCB Rev 1 Pin Assignments +// +// Row: 0, 1, 2, 3 +// Pin: D0, D5, B5, B6 +// + +static void select_row(uint8_t row) +{ + switch (row) { + case 0: + DDRD |= (1<<0); + PORTD &= ~(1<<0); + break; + case 1: + DDRD |= (1<<5); + PORTD &= ~(1<<5); + break; + case 2: + DDRB |= (1<<5); + PORTB &= ~(1<<5); + break; + case 3: + DDRB |= (1<<6); + PORTB &= ~(1<<6); + break; + + } +}
\ No newline at end of file diff --git a/protocol/usb_hid/USB_Host_Shield_2.0 b/protocol/usb_hid/USB_Host_Shield_2.0 -Subproject 2b4a56de3d090686f62d25ea34042759dc4352d +Subproject 8bb790f83af298b5f3e5516259c9d8ec27efe52 |