summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--adb/Makefile82
-rw-r--r--adb_usb/Makefile52
-rw-r--r--adb_usb/README (renamed from adb/README)0
-rw-r--r--adb_usb/config.h (renamed from adb/config.h)14
-rw-r--r--adb_usb/keymap.c (renamed from adb/keymap.c)9
-rw-r--r--adb_usb/led.c9
-rw-r--r--adb_usb/matrix.c (renamed from adb/matrix.c)9
-rw-r--r--pjrc/usb_keyboard.c4
8 files changed, 76 insertions, 103 deletions
diff --git a/adb/Makefile b/adb/Makefile
deleted file mode 100644
index c27c75e15d..0000000000
--- a/adb/Makefile
+++ /dev/null
@@ -1,82 +0,0 @@
-# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = tmk_adb
-
-# Directory common source filess exist
-COMMON_DIR = ..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-TARGET_SRC = keymap.c \
- matrix.c \
- adb.c
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-# comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
-#USB_NKRO_ENABLE = yes # USB Nkey Rollover
-
-
-include $(COMMON_DIR)/Makefile.common
diff --git a/adb_usb/Makefile b/adb_usb/Makefile
new file mode 100644
index 0000000000..61e43a72fd
--- /dev/null
+++ b/adb_usb/Makefile
@@ -0,0 +1,52 @@
+# Target file name (without extension).
+TARGET = adb_usb
+
+# Directory common source filess exist
+COMMON_DIR = ..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+TARGET_SRC = main_pjrc.c \
+ keymap.c \
+ matrix.c \
+ led.c \
+ adb.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+#USB_NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(COMMON_DIR)/Makefile.pjrc
+include $(COMMON_DIR)/Makefile.common
diff --git a/adb/README b/adb_usb/README
index b4bd35bb33..b4bd35bb33 100644
--- a/adb/README
+++ b/adb_usb/README
diff --git a/adb/config.h b/adb_usb/config.h
index 099a24bfa8..ea78dd9bdb 100644
--- a/adb/config.h
+++ b/adb_usb/config.h
@@ -13,18 +13,21 @@
/* matrix size */
#define MATRIX_ROWS 16 // keycode bit: 3-0
#define MATRIX_COLS 8 // keycode bit: 6-4
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-/* USB NKey Rollover */
-#ifdef USB_NKRO_ENABLE
-#endif
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \
+ keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \
+)
+
/* mouse keys */
#ifdef MOUSEKEY_ENABLE
# define MOUSEKEY_DELAY_TIME 192
#endif
+
/* PS/2 mouse */
#ifdef PS2_MOUSE_ENABLE
# define PS2_CLOCK_PORT PORTF
@@ -37,6 +40,7 @@
# define PS2_DATA_BIT 1
#endif
+
/* ADB port setting */
#define ADB_PORT PORTF
#define ADB_PIN PINF
diff --git a/adb/keymap.c b/adb_usb/keymap.c
index 05ab4c4526..c534577013 100644
--- a/adb/keymap.c
+++ b/adb_usb/keymap.c
@@ -9,7 +9,7 @@
#include "print.h"
#include "debug.h"
#include "util.h"
-#include "keymap_skel.h"
+#include "keymap.h"
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
@@ -131,10 +131,3 @@ uint8_t keymap_fn_keycode(uint8_t fn_bits)
{
return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
}
-
-// define a condition to enter special function mode
-bool keymap_is_special_mode(uint8_t fn_bits)
-{
- //return (usb_keyboard_mods == (BIT_LCTRL | BIT_LSHIFT | BIT_LALT | BIT_LGUI));
- return (usb_keyboard_mods == (BIT_RSHIFT));
-}
diff --git a/adb_usb/led.c b/adb_usb/led.c
new file mode 100644
index 0000000000..93009a52fe
--- /dev/null
+++ b/adb_usb/led.c
@@ -0,0 +1,9 @@
+#include "stdint.h"
+#include "adb.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ adb_host_kbd_led(~usb_led);
+}
diff --git a/adb/matrix.c b/adb_usb/matrix.c
index 550506ec4d..72515dce23 100644
--- a/adb/matrix.c
+++ b/adb_usb/matrix.c
@@ -9,8 +9,7 @@
#include "util.h"
#include "debug.h"
#include "adb.h"
-#include "usb_keyboard.h"
-#include "matrix_skel.h"
+#include "matrix.h"
#if (MATRIX_COLS > 16)
@@ -72,12 +71,6 @@ uint8_t matrix_scan(void)
uint16_t codes;
uint8_t key0, key1;
- static uint8_t prev_led = 0;
- if (prev_led != usb_keyboard_leds) {
- adb_host_kbd_led(~usb_keyboard_leds);
- prev_led = usb_keyboard_leds;
- }
-
_matrix_is_modified = false;
codes = adb_host_kbd_recv();
key0 = codes>>8;
diff --git a/pjrc/usb_keyboard.c b/pjrc/usb_keyboard.c
index e29c5c9e91..fc05f7c9e7 100644
--- a/pjrc/usb_keyboard.c
+++ b/pjrc/usb_keyboard.c
@@ -81,8 +81,12 @@ static inline int8_t send_report(report_keyboard_t *report, uint8_t endpoint, ui
UENUM = endpoint;
}
UEDATX = report->mods;
+#ifdef USB_NKRO_ENABLE
if (!keyboard_nkro)
UEDATX = 0;
+#else
+ UEDATX = 0;
+#endif
for (uint8_t i = keys_start; i < keys_end; i++) {
UEDATX = report->keys[i];
}