summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--converter/m0110_usb/Makefile37
-rw-r--r--converter/m0110_usb/Makefile.lufa90
-rw-r--r--converter/m0110_usb/Makefile.pjrc (renamed from converter/m0110_usb/Makefile.hasu)30
-rw-r--r--converter/m0110_usb/README.md12
-rw-r--r--converter/m0110_usb/config.h14
-rw-r--r--converter/m0110_usb/keymap_hasu.c9
6 files changed, 76 insertions, 116 deletions
diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile
index d98e68556a..66eae880f4 100644
--- a/converter/m0110_usb/Makefile
+++ b/converter/m0110_usb/Makefile
@@ -1,5 +1,5 @@
# Target file name (without extension).
-TARGET = m0110
+TARGET = m0110_lufa
# Directory common source filess exist
TOP_DIR = ../..
@@ -8,11 +8,17 @@ TOP_DIR = ../..
TARGET_DIR = .
# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
+SRC = matrix.c \
led.c \
m0110.c
+# To use own keymap file run make like: make keymap=hasu
+ifdef keymap
+ SRC += keymap_$(keymap).c
+else
+ SRC += keymap.c
+endif
+
CONFIG_H = config.h
@@ -32,6 +38,29 @@ MCU = atmega32u4 # Teensy 2.0
F_CPU = 16000000
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
@@ -61,7 +90,7 @@ VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
-include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
diff --git a/converter/m0110_usb/Makefile.lufa b/converter/m0110_usb/Makefile.lufa
deleted file mode 100644
index 8266409c8a..0000000000
--- a/converter/m0110_usb/Makefile.lufa
+++ /dev/null
@@ -1,90 +0,0 @@
-# Target file name (without extension).
-TARGET = m0110_lufa
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC = keymap.c \
- matrix.c \
- led.c \
- m0110.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
-
-
-# Processor frequency.
-# Normally the first thing your program should do is set the clock prescaler,
-# so your program will run at the correct speed. You should also set this
-# variable to same clock speed. The _delay_ms() macro uses this, and many
-# examples use this variable to calculate timings. Do not add a "UL" here.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in bytes
-# Teensy halfKay 512
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
-
-
-
-#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
-
-
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/converter/m0110_usb/Makefile.hasu b/converter/m0110_usb/Makefile.pjrc
index b35b3cce5a..37977a384b 100644
--- a/converter/m0110_usb/Makefile.hasu
+++ b/converter/m0110_usb/Makefile.pjrc
@@ -1,5 +1,5 @@
# Target file name (without extension).
-TARGET = m0110
+TARGET = m0110_pjrc
# Directory common source filess exist
TOP_DIR = ../..
@@ -8,11 +8,17 @@ TOP_DIR = ../..
TARGET_DIR = .
# keyboard dependent files
-SRC = keymap_hasu.c \
- matrix.c \
+SRC = matrix.c \
led.c \
m0110.c
+# To use own keymap file run make like: make keymap=hasu
+ifdef keymap
+ SRC += keymap_$(keymap).c
+else
+ SRC += keymap.c
+endif
+
CONFIG_H = config.h
@@ -32,13 +38,23 @@ MCU = atmega32u4 # Teensy 2.0
F_CPU = 16000000
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
# Build Options
# *Comment out* to disable the options.
#
-MOUSEKEY_ENABLE = yes # Mouse keys
-#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#NKRO_ENABLE = yes # USB Nkey Rollover
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index 80503e8755..bd8bef9f21 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -11,10 +11,16 @@ you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
+Update
+------
+- 2013/08 Change port for signals PF to PD
+
+
+
Connection
----------
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
-Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
+Teensy port `PD0` is assigned for `CLOCK` line and `PD1` for `DATA` by default,
you can change pin configuration with editing *config.h*.
You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
@@ -53,8 +59,8 @@ You can edit *Makefile* and *config.h* to change compile options and pin configu
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb
- $ make -f Makefile.lufa clean
- $ make -f Makefile.lufa
+ $ make -f Makefile clean
+ $ make -f Makefile
and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
diff --git a/converter/m0110_usb/config.h b/converter/m0110_usb/config.h
index dc446414b5..2f63a3a490 100644
--- a/converter/m0110_usb/config.h
+++ b/converter/m0110_usb/config.h
@@ -21,7 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0110
-#define DEVICE_VER 0x0100
+#define DEVICE_VER 0x0101
#define MANUFACTURER t.m.k.
#define PRODUCT M0110 keyboard converter
#define DESCRIPTION convert M0110 keyboard to USB
@@ -50,13 +50,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* ports */
-#define M0110_CLOCK_PORT PORTF
-#define M0110_CLOCK_PIN PINF
-#define M0110_CLOCK_DDR DDRF
+#define M0110_CLOCK_PORT PORTD
+#define M0110_CLOCK_PIN PIND
+#define M0110_CLOCK_DDR DDRD
#define M0110_CLOCK_BIT 0
-#define M0110_DATA_PORT PORTF
-#define M0110_DATA_PIN PINF
-#define M0110_DATA_DDR DDRF
+#define M0110_DATA_PORT PORTD
+#define M0110_DATA_PIN PIND
+#define M0110_DATA_DDR DDRD
#define M0110_DATA_BIT 1
#endif
diff --git a/converter/m0110_usb/keymap_hasu.c b/converter/m0110_usb/keymap_hasu.c
index e3bdb5eedc..3608dac9e4 100644
--- a/converter/m0110_usb/keymap_hasu.c
+++ b/converter/m0110_usb/keymap_hasu.c
@@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include <stdint.h>
#include <stdbool.h>
#include <avr/pgmspace.h>
-#include "usb_keyboard.h"
#include "keycode.h"
#include "print.h"
#include "debug.h"
@@ -153,7 +152,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* `-----------------------------------------------' `---------------'
*/
KEYMAP(
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, FN0, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, FN3, P1, P2, P3, PENT,
@@ -161,7 +160,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
// HHKB & WASD
KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS,
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN0, P4, P5, P6, PPLS,
LSFT,NO, NO, NO, NO, NO, NO, NO, END, PGDN,DOWN, FN3, P1, P2, P3, PENT,
@@ -169,7 +168,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
// vi mousekeys
KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,PSCR,SLCK,PAUS, P7, P8, P9, PMNS,
LCTL,VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS,
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, NO, P1, P2, P3, PENT,
@@ -177,7 +176,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
// vi cusorkeys
KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, PSCR,SLCK,PAUS, P7, P8, P9, PMNS,
LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, NO, P1, P2, P3, PENT,