Merge commit '1fe4406f374291ab2e86e95a97341fd9c475fcb8'

2 files changed, 724 insertions, 0 deletions

diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/tests/peripherals/AX12/AX12.cpp b/tmk_core/tool/mbed/mbed-sdk/libraries/tests/peripherals/AX12/AX12.cpp
new file mode 100644
index 0000000000..ff578ec907
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/tests/peripherals/AX12/AX12.cpp
@@ -0,0 +1,534 @@
+/* mbed AX-12+ Servo Library
+ *
+ * Copyright (c) 2010, cstyles (http://mbed.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "AX12.h"
+#include "mbed.h"
+
+AX12::AX12(PinName tx, PinName rx, int ID, int baud)
+        : _ax12(tx,rx) {
+    _baud = baud;
+    _ID = ID;
+    _ax12.baud(_baud);
+
+}
+
+// Set the mode of the servo
+//  0 = Positional (0-300 degrees)
+//  1 = Rotational -1 to 1 speed
+int AX12::SetMode(int mode) {
+
+    if (mode == 1) { // set CR
+        SetCWLimit(0);
+        SetCCWLimit(0);
+        SetCRSpeed(0.0);
+    } else {
+        SetCWLimit(0);
+        SetCCWLimit(300);
+        SetCRSpeed(0.0);
+    }
+    return(0);
+}
+
+
+// if flag[0] is set, were blocking
+// if flag[1] is set, we're registering
+// they are mutually exclusive operations
+int AX12::SetGoal(int degrees, int flags) {
+
+    char reg_flag = 0;
+    char data[2];
+
+    // set the flag is only the register bit is set in the flag
+    if (flags == 0x2) {
+        reg_flag = 1;
+    }
+
+    // 1023 / 300 * degrees
+    short goal = (1023 * degrees) / 300;
+#ifdef AX12_DEBUG
+    printf("SetGoal to 0x%x\n",goal);
+#endif
+
+    data[0] = goal & 0xff; // bottom 8 bits
+    data[1] = goal >> 8;   // top 8 bits
+
+    // write the packet, return the error code
+    int rVal = write(_ID, AX12_REG_GOAL_POSITION, 2, data, reg_flag);
+
+    if (flags == 1) {
+        // block until it comes to a halt
+        while (isMoving()) {}
+    }
+    return(rVal);
+}
+
+
+// Set continuous rotation speed from -1 to 1
+int AX12::SetCRSpeed(float speed) {
+
+    // bit 10     = direction, 0 = CCW, 1=CW
+    // bits 9-0   = Speed
+    char data[2];
+
+    int goal = (0x3ff * abs(speed));
+
+    // Set direction CW if we have a negative speed
+    if (speed < 0) {
+        goal |= (0x1 << 10);
+    }
+
+    data[0] = goal & 0xff; // bottom 8 bits
+    data[1] = goal >> 8;   // top 8 bits
+
+    // write the packet, return the error code
+    int rVal = write(_ID, 0x20, 2, data);
+
+    return(rVal);
+}
+
+
+int AX12::SetCWLimit (int degrees) {
+
+    char data[2];
+
+    // 1023 / 300 * degrees
+    short limit = (1023 * degrees) / 300;
+
+#ifdef AX12_DEBUG
+    printf("SetCWLimit to 0x%x\n",limit);
+#endif
+
+    data[0] = limit & 0xff; // bottom 8 bits
+    data[1] = limit >> 8;   // top 8 bits
+
+    // write the packet, return the error code
+    return (write(_ID, AX12_REG_CW_LIMIT, 2, data));
+
+}
+
+int AX12::SetCCWLimit (int degrees) {
+
+    char data[2];
+
+    // 1023 / 300 * degrees
+    short limit = (1023 * degrees) / 300;
+
+#ifdef AX12_DEBUG
+    printf("SetCCWLimit to 0x%x\n",limit);
+#endif
+
+    data[0] = limit & 0xff; // bottom 8 bits
+    data[1] = limit >> 8;   // top 8 bits
+
+    // write the packet, return the error code
+    return (write(_ID, AX12_REG_CCW_LIMIT, 2, data));
+}
+
+
+int AX12::SetID (int CurrentID, int NewID) {
+
+    char data[1];
+    data[0] = NewID;
+
+#ifdef AX12_DEBUG
+    printf("Setting ID from 0x%x to 0x%x\n",CurrentID,NewID);
+#endif
+
+    return (write(CurrentID, AX12_REG_ID, 1, data));
+
+}
+
+
+int AX12::SetBaud (int baud) {
+
+    char data[1];
+    data[0] = baud;
+
+#ifdef AX12_DEBUG
+    printf("Setting Baud rate to %d\n",baud);
+#endif
+
+    return (write(0xFE, AX12_REG_BAUD, 1, data));
+
+}
+
+
+
+// return 1 is the servo is still in flight
+int AX12::isMoving(void) {
+
+    char data[1];
+    read(_ID,AX12_REG_MOVING,1,data);
+    return(data[0]);
+}
+
+
+void AX12::trigger(void) {
+
+    char TxBuf[16];
+    char sum = 0;
+
+#ifdef AX12_TRIGGER_DEBUG
+    // Build the TxPacket first in RAM, then we'll send in one go
+    printf("\nTriggered\n");
+    printf("\nTrigger Packet\n  Header : 0xFF, 0xFF\n");
+#endif
+
+    TxBuf[0] = 0xFF;
+    TxBuf[1] = 0xFF;
+
+    // ID - Broadcast
+    TxBuf[2] = 0xFE;
+    sum += TxBuf[2];
+
+#ifdef AX12_TRIGGER_DEBUG
+    printf("  ID : %d\n",TxBuf[2]);
+#endif
+
+    // Length
+    TxBuf[3] = 0x02;
+    sum += TxBuf[3];
+
+#ifdef AX12_TRIGGER_DEBUG
+    printf("  Length %d\n",TxBuf[3]);
+#endif
+
+    // Instruction - ACTION
+    TxBuf[4] = 0x04;
+    sum += TxBuf[4];
+
+#ifdef AX12_TRIGGER_DEBUG
+    printf("  Instruction 0x%X\n",TxBuf[5]);
+#endif
+
+    // Checksum
+    TxBuf[5] = 0xFF - sum;
+#ifdef AX12_TRIGGER_DEBUG
+    printf("  Checksum 0x%X\n",TxBuf[5]);
+#endif
+
+    // Transmit the packet in one burst with no pausing
+    for (int i = 0; i < 6 ; i++) {
+        _ax12.putc(TxBuf[i]);
+    }
+
+    // This is a broadcast packet, so there will be no reply
+    return;
+}
+
+
+float AX12::GetPosition(void) {
+
+#ifdef AX12_DEBUG
+    printf("\nGetPosition(%d)",_ID);
+#endif
+
+    char data[2];
+
+    int ErrorCode = read(_ID, AX12_REG_POSITION, 2, data);
+    short position = data[0] + (data[1] << 8);
+    float angle = (position * 300)/1024;
+
+    return (angle);
+}
+
+
+float AX12::GetTemp (void) {
+
+#ifdef AX12_DEBUG
+    printf("\nGetTemp(%d)",_ID);
+#endif
+
+    char data[1];
+    int ErrorCode = read(_ID, AX12_REG_TEMP, 1, data);
+    float temp = data[0];
+    return(temp);
+}
+
+
+float AX12::GetVolts (void) {
+
+#ifdef AX12_DEBUG
+    printf("\nGetVolts(%d)",_ID);
+#endif
+
+    char data[1];
+    int ErrorCode = read(_ID, AX12_REG_VOLTS, 1, data);
+    float volts = data[0]/10.0;
+    return(volts);
+}
+
+
+int AX12::read(int ID, int start, int bytes, char* data) {
+
+    char PacketLength = 0x4;
+    char TxBuf[16];
+    char sum = 0;
+    char Status[16];
+
+    Status[4] = 0xFE; // return code
+
+#ifdef AX12_READ_DEBUG
+    printf("\nread(%d,0x%x,%d,data)\n",ID,start,bytes);
+#endif
+
+    // Build the TxPacket first in RAM, then we'll send in one go
+#ifdef AX12_READ_DEBUG
+    printf("\nInstruction Packet\n  Header : 0xFF, 0xFF\n");
+#endif
+
+    TxBuf[0] = 0xff;
+    TxBuf[1] = 0xff;
+
+    // ID
+    TxBuf[2] = ID;
+    sum += TxBuf[2];
+
+#ifdef AX12_READ_DEBUG
+    printf("  ID : %d\n",TxBuf[2]);
+#endif
+
+    // Packet Length
+    TxBuf[3] = PacketLength;    // Length = 4 ; 2 + 1 (start) = 1 (bytes)
+    sum += TxBuf[3];            // Accululate the packet sum
+
+#ifdef AX12_READ_DEBUG
+    printf("  Length : 0x%x\n",TxBuf[3]);
+#endif
+
+    // Instruction - Read
+    TxBuf[4] = 0x2;
+    sum += TxBuf[4];
+
+#ifdef AX12_READ_DEBUG
+    printf("  Instruction : 0x%x\n",TxBuf[4]);
+#endif
+
+    // Start Address
+    TxBuf[5] = start;
+    sum += TxBuf[5];
+
+#ifdef AX12_READ_DEBUG
+    printf("  Start Address : 0x%x\n",TxBuf[5]);
+#endif
+
+    // Bytes to read
+    TxBuf[6] = bytes;
+    sum += TxBuf[6];
+
+#ifdef AX12_READ_DEBUG
+    printf("  No bytes : 0x%x\n",TxBuf[6]);
+#endif
+
+    // Checksum
+    TxBuf[7] = 0xFF - sum;
+#ifdef AX12_READ_DEBUG
+    printf("  Checksum : 0x%x\n",TxBuf[7]);
+#endif
+
+    // Transmit the packet in one burst with no pausing
+    for (int i = 0; i<8 ; i++) {
+        _ax12.putc(TxBuf[i]);
+    }
+
+    // Wait for the bytes to be transmitted
+    wait (0.00002);
+
+    // Skip if the read was to the broadcast address
+    if (_ID != 0xFE) {
+
+
+
+        // response packet is always 6 + bytes
+        // 0xFF, 0xFF, ID, Length Error, Param(s) Checksum
+        // timeout is a little more than the time to transmit
+        // the packet back, i.e. (6+bytes)*10 bit periods
+
+        int timeout = 0;
+        int plen = 0;
+        while ((timeout < ((6+bytes)*10)) && (plen<(6+bytes))) {
+
+            if (_ax12.readable()) {
+                Status[plen] = _ax12.getc();
+                plen++;
+                timeout = 0;
+            }
+
+            // wait for the bit period
+            wait (1.0/_baud);
+            timeout++;
+        }
+
+        if (timeout == ((6+bytes)*10) ) {
+            return(-1);
+        }
+
+        // Copy the data from Status into data for return
+        for (int i=0; i < Status[3]-2 ; i++) {
+            data[i] = Status[5+i];
+        }
+
+#ifdef AX12_READ_DEBUG
+        printf("\nStatus Packet\n");
+        printf("  Header : 0x%x\n",Status[0]);
+        printf("  Header : 0x%x\n",Status[1]);
+        printf("  ID : 0x%x\n",Status[2]);
+        printf("  Length : 0x%x\n",Status[3]);
+        printf("  Error Code : 0x%x\n",Status[4]);
+
+        for (int i=0; i < Status[3]-2 ; i++) {
+            printf("  Data : 0x%x\n",Status[5+i]);
+        }
+
+        printf("  Checksum : 0x%x\n",Status[5+(Status[3]-2)]);
+#endif
+
+    } // if (ID!=0xFE)
+
+    return(Status[4]);
+}
+
+
+int AX12::write(int ID, int start, int bytes, char* data, int flag) {
+// 0xff, 0xff, ID, Length, Intruction(write), Address, Param(s), Checksum
+
+    char TxBuf[16];
+    char sum = 0;
+    char Status[6];
+
+#ifdef AX12_WRITE_DEBUG
+    printf("\nwrite(%d,0x%x,%d,data,%d)\n",ID,start,bytes,flag);
+#endif
+
+    // Build the TxPacket first in RAM, then we'll send in one go
+#ifdef AX12_WRITE_DEBUG
+    printf("\nInstruction Packet\n  Header : 0xFF, 0xFF\n");
+#endif
+
+    TxBuf[0] = 0xff;
+    TxBuf[1] = 0xff;
+
+    // ID
+    TxBuf[2] = ID;
+    sum += TxBuf[2];
+
+#ifdef AX12_WRITE_DEBUG
+    printf("  ID : %d\n",TxBuf[2]);
+#endif
+
+    // packet Length
+    TxBuf[3] = 3+bytes;
+    sum += TxBuf[3];
+
+#ifdef AX12_WRITE_DEBUG
+    printf("  Length : %d\n",TxBuf[3]);
+#endif
+
+    // Instruction
+    if (flag == 1) {
+        TxBuf[4]=0x04;
+        sum += TxBuf[4];
+    } else {
+        TxBuf[4]=0x03;
+        sum += TxBuf[4];
+    }
+
+#ifdef AX12_WRITE_DEBUG
+    printf("  Instruction : 0x%x\n",TxBuf[4]);
+#endif
+
+    // Start Address
+    TxBuf[5] = start;
+    sum += TxBuf[5];
+
+#ifdef AX12_WRITE_DEBUG
+    printf("  Start : 0x%x\n",TxBuf[5]);
+#endif
+
+    // data
+    for (char i=0; i<bytes ; i++) {
+        TxBuf[6+i] = data[i];
+        sum += TxBuf[6+i];
+
+#ifdef AX12_WRITE_DEBUG
+        printf("  Data : 0x%x\n",TxBuf[6+i]);
+#endif
+
+    }
+
+    // checksum
+    TxBuf[6+bytes] = 0xFF - sum;
+
+#ifdef AX12_WRITE_DEBUG
+    printf("  Checksum : 0x%x\n",TxBuf[6+bytes]);
+#endif
+
+    // Transmit the packet in one burst with no pausing
+    for (int i = 0; i < (7 + bytes) ; i++) {
+        _ax12.putc(TxBuf[i]);
+    }
+
+    // Wait for data to transmit
+    wait (0.00002);
+
+    // make sure we have a valid return
+    Status[4]=0x00;
+
+    // we'll only get a reply if it was not broadcast
+    if (_ID!=0xFE) {
+
+
+        // response packet is always 6 bytes
+        // 0xFF, 0xFF, ID, Length Error, Param(s) Checksum
+        // timeout is a little more than the time to transmit
+        // the packet back, i.e. 60 bit periods, round up to 100
+        int timeout = 0;
+        int plen = 0;
+        while ((timeout < 100) && (plen<6)) {
+
+            if (_ax12.readable()) {
+                Status[plen] = _ax12.getc();
+                plen++;
+                timeout = 0;
+            }
+
+            // wait for the bit period
+            wait (1.0/_baud);
+            timeout++;
+        }
+
+
+        // Build the TxPacket first in RAM, then we'll send in one go
+#ifdef AX12_WRITE_DEBUG
+        printf("\nStatus Packet\n  Header : 0x%X, 0x%X\n",Status[0],Status[1]);
+        printf("  ID : %d\n",Status[2]);
+        printf("  Length : %d\n",Status[3]);
+        printf("  Error : 0x%x\n",Status[4]);
+        printf("  Checksum : 0x%x\n",Status[5]);
+#endif
+
+
+    }
+
+    return(Status[4]); // return error code
+}
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/tests/peripherals/AX12/AX12.h b/tmk_core/tool/mbed/mbed-sdk/libraries/tests/peripherals/AX12/AX12.h
new file mode 100644
index 0000000000..d1b3b42aef
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/tests/peripherals/AX12/AX12.h
@@ -0,0 +1,190 @@
+/* mbed AX-12+ Servo Library
+ *
+ * Copyright (c) 2010, cstyles (http://mbed.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MBED_AX12_H
+#define MBED_AX12_H
+
+#include "mbed.h"
+
+#define AX12_WRITE_DEBUG 1
+#define AX12_READ_DEBUG 1
+#define AX12_TRIGGER_DEBUG 1
+#define AX12_DEBUG 1
+
+#define AX12_REG_ID 0x3
+#define AX12_REG_BAUD 0x4
+#define AX12_REG_CW_LIMIT 0x06
+#define AX12_REG_CCW_LIMIT 0x08
+#define AX12_REG_GOAL_POSITION 0x1E
+#define AX12_REG_MOVING_SPEED 0x20
+#define AX12_REG_VOLTS 0x2A
+#define AX12_REG_TEMP 0x2B
+#define AX12_REG_MOVING 0x2E
+#define AX12_REG_POSITION 0x24
+
+#define AX12_MODE_POSITION  0
+#define AX12_MODE_ROTATION  1
+
+#define AX12_CW 1
+#define AX12_CCW 0
+
+/** Servo control class, based on a PwmOut
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ * #include "AX12.h"
+ *
+ * int main() {
+ *
+ *   AX12 myax12 (p9, p10, 1);
+ *
+ *   while (1) {
+ *       myax12.SetGoal(0);    // go to 0 degrees
+ *       wait (2.0);
+ *       myax12.SetGoal(300);  // go to 300 degrees
+ *       wait (2.0);
+ *   }
+ * }
+ * @endcode
+ */
+class AX12 {
+
+public:
+
+    /** Create an AX12 servo object connected to the specified serial port, with the specified ID
+     *
+     * @param pin tx pin
+     * @param pin rx pin
+     * @param int ID, the Bus ID of the servo 1-255
+     */
+    AX12(PinName tx, PinName rx, int ID, int baud=1000000);
+
+    /** Set the mode of the servo
+     * @param mode
+     *    0 = Positional, default
+     *    1 = Continuous rotation
+     */
+    int SetMode(int mode);
+
+    /** Set baud rate of all attached servos
+     * @param mode
+     *    0x01 = 1,000,000 bps
+     *    0x03 =   500,000 bps
+     *    0x04 =   400,000 bps
+     *    0x07 =   250,000 bps
+     *    0x09 =   200,000 bps
+     *    0x10 =   115,200 bps
+     *    0x22 =    57,600 bps
+     *    0x67 =    19,200 bps
+     *    0xCF =     9,600 bp
+     */
+    int SetBaud(int baud);
+
+
+    /** Set goal angle in integer degrees, in positional mode
+     *
+     * @param degrees 0-300
+     * @param flags, defaults to 0
+     *    flags[0] = blocking, return when goal position reached
+     *    flags[1] = register, activate with a broadcast trigger
+     *
+     */
+    int SetGoal(int degrees, int flags = 0);
+
+
+    /** Set the speed of the servo in continuous rotation mode
+     *
+     * @param speed, -1.0 to 1.0
+     *   -1.0 = full speed counter clock wise
+     *    1.0 = full speed clock wise
+     */
+    int SetCRSpeed(float speed);
+
+
+    /** Set the clockwise limit of the servo
+     *
+     * @param degrees, 0-300
+     */
+    int SetCWLimit(int degrees);
+
+    /** Set the counter-clockwise limit of the servo
+     *
+     * @param degrees, 0-300
+     */
+    int SetCCWLimit(int degrees);
+
+    // Change the ID
+
+    /** Change the ID of a servo
+     *
+     * @param CurentID 1-255
+     * @param NewID 1-255
+     *
+     * If a servo ID is not know, the broadcast address of 0 can be used for CurrentID.
+     * In this situation, only one servo should be connected to the bus
+     */
+    int SetID(int CurrentID, int NewID);
+
+
+    /** Poll to see if the servo is moving
+     *
+     * @returns true is the servo is moving
+     */
+    int isMoving(void);
+
+    /** Send the broadcast "trigger" command, to activate any outstanding registered commands
+     */
+    void trigger(void);
+
+    /** Read the current angle of the servo
+     *
+     * @returns float in the range 0.0-300.0
+     */
+    float GetPosition();
+
+    /** Read the temperature of the servo
+     *
+     * @returns float temperature
+     */
+    float GetTemp(void);
+
+    /** Read the supply voltage of the servo
+     *
+     * @returns float voltage
+     */
+    float GetVolts(void);
+
+    int read(int ID, int start, int length, char* data);
+    int write(int ID, int start, int length, char* data, int flag=0);
+
+private :
+
+    SerialHalfDuplex _ax12;
+    int _ID;
+    int _baud;
+
+
+};
+
+#endif