summaryrefslogtreecommitdiff
path: root/protocol/vusb/usbdrv/usbdrvasm20.inc
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2012-06-07 02:25:15 +0900
committertmk <nobody@nowhere>2012-06-07 02:47:33 +0900
commitf4125707399d11a7d80587659c464b9bcddb8c56 (patch)
tree1d2a02e30f8cd103e8f4dc36629c09f6a3d44fef /protocol/vusb/usbdrv/usbdrvasm20.inc
parent225de7a847a511d004bf909b1334e19497cf2f9d (diff)
Moved files to common, protocol and doc directory
Diffstat (limited to 'protocol/vusb/usbdrv/usbdrvasm20.inc')
-rw-r--r--protocol/vusb/usbdrv/usbdrvasm20.inc360
1 files changed, 360 insertions, 0 deletions
diff --git a/protocol/vusb/usbdrv/usbdrvasm20.inc b/protocol/vusb/usbdrv/usbdrvasm20.inc
new file mode 100644
index 0000000000..303abaf64c
--- /dev/null
+++ b/protocol/vusb/usbdrv/usbdrvasm20.inc
@@ -0,0 +1,360 @@
+/* Name: usbdrvasm20.inc
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Jeroen Benschop
+ * Based on usbdrvasm16.inc from Christian Starkjohann
+ * Creation Date: 2008-03-05
+ * Tabsize: 4
+ * Copyright: (c) 2008 by Jeroen Benschop and OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * Revision: $Id: usbdrvasm20.inc 740 2009-04-13 18:23:31Z cs $
+ */
+
+/* Do not link this file! Link usbdrvasm.S instead, which includes the
+ * appropriate implementation!
+ */
+
+/*
+General Description:
+This file is the 20 MHz version of the asssembler part of the USB driver. It
+requires a 20 MHz crystal (not a ceramic resonator and not a calibrated RC
+oscillator).
+
+See usbdrv.h for a description of the entire driver.
+
+Since almost all of this code is timing critical, don't change unless you
+really know what you are doing! Many parts require not only a maximum number
+of CPU cycles, but even an exact number of cycles!
+*/
+
+#define leap2 x3
+#ifdef __IAR_SYSTEMS_ASM__
+#define nextInst $+2
+#else
+#define nextInst .+0
+#endif
+
+;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
+;nominal frequency: 20 MHz -> 13.333333 cycles per bit, 106.666667 cycles per byte
+; Numbers in brackets are clocks counted from center of last sync bit
+; when instruction starts
+;register use in receive loop:
+; shift assembles the byte currently being received
+; x1 holds the D+ and D- line state
+; x2 holds the previous line state
+; x4 (leap) is used to add a leap cycle once every three bytes received
+; X3 (leap2) is used to add a leap cycle once every three stuff bits received
+; bitcnt is used to determine when a stuff bit is due
+; cnt holds the number of bytes left in the receive buffer
+
+USB_INTR_VECTOR:
+;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt
+ push YL ;[-28] push only what is necessary to sync with edge ASAP
+ in YL, SREG ;[-26]
+ push YL ;[-25]
+ push YH ;[-23]
+;----------------------------------------------------------------------------
+; Synchronize with sync pattern:
+;----------------------------------------------------------------------------
+;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
+;sync up with J to K edge during sync pattern -- use fastest possible loops
+;The first part waits at most 1 bit long since we must be in sync pattern.
+;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
+;waitForJ, ensure that this prerequisite is met.
+waitForJ:
+ inc YL
+ sbis USBIN, USBMINUS
+ brne waitForJ ; just make sure we have ANY timeout
+waitForK:
+;The following code results in a sampling window of < 1/4 bit which meets the spec.
+ sbis USBIN, USBMINUS ;[-19]
+ rjmp foundK ;[-18]
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+ sbis USBIN, USBMINUS
+ rjmp foundK
+#if USB_COUNT_SOF
+ lds YL, usbSofCount
+ inc YL
+ sts usbSofCount, YL
+#endif /* USB_COUNT_SOF */
+#ifdef USB_SOF_HOOK
+ USB_SOF_HOOK
+#endif
+ rjmp sofError
+foundK: ;[-16]
+;{3, 5} after falling D- edge, average delay: 4 cycles
+;bit0 should be at 34 for center sampling. Currently at 4 so 30 cylces till bit 0 sample
+;use 1 bit time for setup purposes, then sample again. Numbers in brackets
+;are cycles from center of first sync (double K) bit after the instruction
+ push bitcnt ;[-16]
+; [---] ;[-15]
+ lds YL, usbInputBufOffset;[-14]
+; [---] ;[-13]
+ clr YH ;[-12]
+ subi YL, lo8(-(usbRxBuf));[-11] [rx loop init]
+ sbci YH, hi8(-(usbRxBuf));[-10] [rx loop init]
+ push shift ;[-9]
+; [---] ;[-8]
+ ldi shift,0x40 ;[-7] set msb to "1" so processing bit7 can be detected
+ nop2 ;[-6]
+; [---] ;[-5]
+ ldi bitcnt, 5 ;[-4] [rx loop init]
+ sbis USBIN, USBMINUS ;[-3] we want two bits K (sample 3 cycles too early)
+ rjmp haveTwoBitsK ;[-2]
+ pop shift ;[-1] undo the push from before
+ pop bitcnt ;[1]
+ rjmp waitForK ;[3] this was not the end of sync, retry
+; The entire loop from waitForK until rjmp waitForK above must not exceed two
+; bit times (= 27 cycles).
+
+;----------------------------------------------------------------------------
+; push more registers and initialize values while we sample the first bits:
+;----------------------------------------------------------------------------
+haveTwoBitsK:
+ push x1 ;[0]
+ push x2 ;[2]
+ push x3 ;[4] (leap2)
+ ldi leap2, 0x55 ;[6] add leap cycle on 2nd,5th,8th,... stuff bit
+ push x4 ;[7] == leap
+ ldi leap, 0x55 ;[9] skip leap cycle on 2nd,5th,8th,... byte received
+ push cnt ;[10]
+ ldi cnt, USB_BUFSIZE ;[12] [rx loop init]
+ ldi x2, 1<<USBPLUS ;[13] current line state is K state. D+=="1", D-=="0"
+bit0:
+ in x1, USBIN ;[0] sample line state
+ andi x1, USBMASK ;[1] filter only D+ and D- bits
+ rjmp handleBit ;[2] make bit0 14 cycles long
+
+;----------------------------------------------------------------------------
+; Process bit7. However, bit 6 still may need unstuffing.
+;----------------------------------------------------------------------------
+
+b6checkUnstuff:
+ dec bitcnt ;[9]
+ breq unstuff6 ;[10]
+bit7:
+ subi cnt, 1 ;[11] cannot use dec becaus it does not affect the carry flag
+ brcs overflow ;[12] Too many bytes received. Ignore packet
+ in x1, USBIN ;[0] sample line state
+ andi x1, USBMASK ;[1] filter only D+ and D- bits
+ cpse x1, x2 ;[2] when previous line state equals current line state, handle "1"
+ rjmp b7handle0 ;[3] when line state differs, handle "0"
+ sec ;[4]
+ ror shift ;[5] shift "1" into the data
+ st y+, shift ;[6] store the data into the buffer
+ ldi shift, 0x40 ;[7] reset data for receiving the next byte
+ subi leap, 0x55 ;[9] trick to introduce a leap cycle every 3 bytes
+ brcc nextInst ;[10 or 11] it will fail after 85 bytes. However low speed can only receive 11
+ dec bitcnt ;[11 or 12]
+ brne bit0 ;[12 or 13]
+ ldi x1, 1 ;[13 or 14] unstuffing bit 7
+ in bitcnt, USBIN ;[0] sample stuff bit
+ rjmp unstuff ;[1]
+
+b7handle0:
+ mov x2,x1 ;[5] Set x2 to current line state
+ ldi bitcnt, 6 ;[6]
+ lsr shift ;[7] shift "0" into the data
+ st y+, shift ;[8] store data into the buffer
+ ldi shift, 0x40 ;[10] reset data for receiving the next byte
+ subi leap, 0x55 ;[11] trick to introduce a leap cycle every 3 bytes
+ brcs bit0 ;[12] it will fail after 85 bytes. However low speed can only receive 11
+ rjmp bit0 ;[13]
+
+
+;----------------------------------------------------------------------------
+; Handle unstuff
+; x1==0xFF indicate unstuffing bit6
+;----------------------------------------------------------------------------
+
+unstuff6:
+ ldi x1,0xFF ;[12] indicate unstuffing bit 6
+ in bitcnt, USBIN ;[0] sample stuff bit
+ nop ;[1] fix timing
+unstuff: ;b0-5 b6 b7
+ mov x2,bitcnt ;[3] [2] [3] Set x2 to match line state
+ subi leap2, 0x55 ;[4] [3] [4] delay loop
+ brcs nextInst ;[5] [4] [5] add one cycle every three stuff bits
+ sbci leap2,0 ;[6] [5] [6]
+ ldi bitcnt,6 ;[7] [6] [7] reset bit stuff counter
+ andi x2, USBMASK ;[8] [7] [8] only keep D+ and D-
+ cpi x1,0 ;[9] [8] [9]
+ brmi bit7 ;[10] [9] [10] finished unstuffing bit6 When x1<0
+ breq bitloop ;[11] --- [11] finished unstuffing bit0-5 when x1=0
+ nop ;--- --- [12]
+ in x1, USBIN ;--- --- [0] sample line state for bit0
+ andi x1, USBMASK ;--- --- [1] filter only D+ and D- bits
+ rjmp handleBit ;--- --- [2] make bit0 14 cycles long
+
+;----------------------------------------------------------------------------
+; Receiver loop (numbers in brackets are cycles within byte after instr)
+;----------------------------------------------------------------------------
+bitloop:
+ in x1, USBIN ;[0] sample line state
+ andi x1, USBMASK ;[1] filter only D+ and D- bits
+ breq se0 ;[2] both lines are low so handle se0
+handleBit:
+ cpse x1, x2 ;[3] when previous line state equals current line state, handle "1"
+ rjmp handle0 ;[4] when line state differs, handle "0"
+ sec ;[5]
+ ror shift ;[6] shift "1" into the data
+ brcs b6checkUnstuff ;[7] When after shift C is set, next bit is bit7
+ nop2 ;[8]
+ dec bitcnt ;[10]
+ brne bitloop ;[11]
+ ldi x1,0 ;[12] indicate unstuff for bit other than bit6 or bit7
+ in bitcnt, USBIN ;[0] sample stuff bit
+ rjmp unstuff ;[1]
+
+handle0:
+ mov x2, x1 ;[6] Set x2 to current line state
+ ldi bitcnt, 6 ;[7] reset unstuff counter.
+ lsr shift ;[8] shift "0" into the data
+ brcs bit7 ;[9] When after shift C is set, next bit is bit7
+ nop ;[10]
+ rjmp bitloop ;[11]
+
+;----------------------------------------------------------------------------
+; End of receive loop. Now start handling EOP
+;----------------------------------------------------------------------------
+
+macro POP_STANDARD ; 14 cycles
+ pop cnt
+ pop x4
+ pop x3
+ pop x2
+ pop x1
+ pop shift
+ pop bitcnt
+ endm
+macro POP_RETI ; 7 cycles
+ pop YH
+ pop YL
+ out SREG, YL
+ pop YL
+ endm
+
+
+
+#include "asmcommon.inc"
+
+; USB spec says:
+; idle = J
+; J = (D+ = 0), (D- = 1)
+; K = (D+ = 1), (D- = 0)
+; Spec allows 7.5 bit times from EOP to SOP for replies
+; 7.5 bit times is 100 cycles. This implementation arrives a bit later at se0
+; then specified in the include file but there is plenty of time
+
+bitstuffN:
+ eor x1, x4 ;[8]
+ ldi x2, 0 ;[9]
+ nop2 ;[10]
+ out USBOUT, x1 ;[12] <-- out
+ rjmp didStuffN ;[0]
+
+bitstuff7:
+ eor x1, x4 ;[6]
+ ldi x2, 0 ;[7] Carry is zero due to brcc
+ rol shift ;[8] compensate for ror shift at branch destination
+ nop2 ;[9]
+ rjmp didStuff7 ;[11]
+
+sendNakAndReti:
+ ldi x3, USBPID_NAK ;[-18]
+ rjmp sendX3AndReti ;[-17]
+sendAckAndReti:
+ ldi cnt, USBPID_ACK ;[-17]
+sendCntAndReti:
+ mov x3, cnt ;[-16]
+sendX3AndReti:
+ ldi YL, 20 ;[-15] x3==r20 address is 20
+ ldi YH, 0 ;[-14]
+ ldi cnt, 2 ;[-13]
+; rjmp usbSendAndReti fallthrough
+
+;usbSend:
+;pointer to data in 'Y'
+;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
+;uses: x1...x4, btcnt, shift, cnt, Y
+;Numbers in brackets are time since first bit of sync pattern is sent
+;We don't match the transfer rate exactly (don't insert leap cycles every third
+;byte) because the spec demands only 1.5% precision anyway.
+usbSendAndReti: ; 12 cycles until SOP
+ in x2, USBDDR ;[-12]
+ ori x2, USBMASK ;[-11]
+ sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups)
+ in x1, USBOUT ;[-8] port mirror for tx loop
+ out USBDDR, x2 ;[-7] <- acquire bus
+; need not init x2 (bitstuff history) because sync starts with 0
+ ldi x4, USBMASK ;[-6] exor mask
+ ldi shift, 0x80 ;[-5] sync byte is first byte sent
+txByteLoop:
+ ldi bitcnt, 0x49 ;[-4] [10] binary 01001001
+txBitLoop:
+ sbrs shift, 0 ;[-3] [10] [11]
+ eor x1, x4 ;[-2] [11] [12]
+ out USBOUT, x1 ;[-1] [12] [13] <-- out N
+ ror shift ;[0] [13] [14]
+ ror x2 ;[1]
+didStuffN:
+ nop2 ;[2]
+ nop ;[4]
+ cpi x2, 0xfc ;[5]
+ brcc bitstuffN ;[6]
+ lsr bitcnt ;[7]
+ brcc txBitLoop ;[8]
+ brne txBitLoop ;[9]
+
+ sbrs shift, 0 ;[10]
+ eor x1, x4 ;[11]
+didStuff7:
+ out USBOUT, x1 ;[-1] [13] <-- out 7
+ ror shift ;[0] [14]
+ ror x2 ;[1]
+ nop ;[2]
+ cpi x2, 0xfc ;[3]
+ brcc bitstuff7 ;[4]
+ ld shift, y+ ;[5]
+ dec cnt ;[7]
+ brne txByteLoop ;[8]
+;make SE0:
+ cbr x1, USBMASK ;[9] prepare SE0 [spec says EOP may be 25 to 30 cycles]
+ lds x2, usbNewDeviceAddr;[10]
+ lsl x2 ;[12] we compare with left shifted address
+ out USBOUT, x1 ;[13] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle
+ subi YL, 20 + 2 ;[0] Only assign address on data packets, not ACK/NAK in x3
+ sbci YH, 0 ;[1]
+;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
+;set address only after data packet was sent, not after handshake
+ breq skipAddrAssign ;[2]
+ sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer
+skipAddrAssign:
+;end of usbDeviceAddress transfer
+ ldi x2, 1<<USB_INTR_PENDING_BIT;[4] int0 occurred during TX -- clear pending flag
+ USB_STORE_PENDING(x2) ;[5]
+ ori x1, USBIDLE ;[6]
+ in x2, USBDDR ;[7]
+ cbr x2, USBMASK ;[8] set both pins to input
+ mov x3, x1 ;[9]
+ cbr x3, USBMASK ;[10] configure no pullup on both pins
+ ldi x4, 5 ;[11]
+se0Delay:
+ dec x4 ;[12] [15] [18] [21] [24]
+ brne se0Delay ;[13] [16] [19] [22] [25]
+ out USBOUT, x1 ;[26] <-- out J (idle) -- end of SE0 (EOP signal)
+ out USBDDR, x2 ;[27] <-- release bus now
+ out USBOUT, x3 ;[28] <-- ensure no pull-up resistors are active
+ rjmp doReturn