merging tmk

49 files changed, 1846 insertions, 173 deletions

diff --git a/keyboard/IIgs/Makefile b/keyboard/IIgs/Makefile
index c18e9720c7..3bf380e64b 100644
--- a/keyboard/IIgs/Makefile
+++ b/keyboard/IIgs/Makefile
@@ -42,7 +42,7 @@
 TARGET = IIgs_Standard
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -88,8 +88,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/alps64/Makefile b/keyboard/alps64/Makefile
new file mode 100644
index 0000000000..e90dcedb67
--- /dev/null
+++ b/keyboard/alps64/Makefile
@@ -0,0 +1,134 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = alps64
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/alps64/config.h b/keyboard/alps64/config.h
new file mode 100644
index 0000000000..824d3e8302
--- /dev/null
+++ b/keyboard/alps64/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6464
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    TMK
+#define PRODUCT         Alps64
+#define DESCRIPTION     TMK keyboard firmware for Alps64
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/alps64/keymap_common.c b/keyboard/alps64/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/alps64/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/alps64/keymap_common.h b/keyboard/alps64/keymap_common.h
new file mode 100644
index 0000000000..957db57922
--- /dev/null
+++ b/keyboard/alps64/keymap_common.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* Alps64 keymap definition macro */
+#define KEYMAP( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \
+    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
+    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
+    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
+    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 } \
+}
+
+/* AEK US */
+#define KEYMAP_AEK( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, \
+    K30, K40, K50,           K60,                          K00, K10, K20  \
+) KEYMAP( \
+    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, NUHS,K27, \
+    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
+    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
+    K31, NUBS,K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, ESC, \
+    K30, K40, K50,           K60,                     APP, K00, K10, K20  \
+)
+
+#endif
diff --git a/keyboard/alps64/keymap_hasu.c b/keyboard/alps64/keymap_hasu.c
new file mode 100644
index 0000000000..d297d72fea
--- /dev/null
+++ b/keyboard/alps64/keymap_hasu.c
@@ -0,0 +1,151 @@
+#include "keymap_common.h"
+
+/*
+ * Hasu
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|   \   |
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Bspc |
+     * |-----------------------------------------------------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|FN1     |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|Fn2|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     */
+    [0] = KEYMAP_AEK( \
+        ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSPC, \
+        LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN3, QUOT,FN1, \
+        LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2, RSFT, \
+        LCTL,LGUI,LALT,          FN4,                          RALT,FN5, FN0),
+
+    /* HHKB mode[HHKB Fn]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   `   |
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Del  |
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     */ 
+    [1] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+        CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,  DEL, \
+        LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS, \
+        LSFT,NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,RSFT, \
+        LCTL,LGUI,LALT,          TRNS,                         RALT,RGUI,TRNS),
+
+    /* Vi mode[Slash]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Del    |
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd|   |   |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|   |Lef|Dow|Rig|   |Lef|Dow|Up |Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgUlEnd|Fn0|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     */
+    [2] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+        TAB, HOME,PGDN,UP,  PGUP,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,  DEL, \
+        LCTL,NO,  LEFT,DOWN,RGHT,NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,  ENT, \
+        LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2, RSFT, \
+        LCTL,LGUI,LALT,          SPC,                          RALT,RGUI,RCTL),
+
+    /* Mouse mode(IJKL)[Semicolon]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+     * |-----------------------------------------------------------|
+     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Fn |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    [3] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+        FN8, NO,  NO,  NO,  NO,  NO,  NO,  WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+        LCTL,ACL0,ACL1,ACL2,ACL2,NO,  NO,  MS_L,MS_D,MS_R,TRNS,NO,  ENT, \
+        LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,FN9, FN10,NO,  RSFT, \
+        LCTL,LGUI,LALT,          BTN1,                         TRNS,TRNS,TRNS),
+
+    /* Layer 4: Mouse mode(IJKL)[Space]
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Tab  |   |   |   |   |   |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
+     * |-----------------------------------------------------------|
+     * |Contro|   |   |   |   |   |Mb2|McL|McD|McR|Mb1|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |Mb3|Mb2|Mb1|Mb4|Mb5|   |Shift |   |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt  |       Space            |Alt   |Fn5 |Ctrl |
+     * `-----------------------------------------------------------'
+     * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
+     */
+    [4] = KEYMAP_AEK( \
+        GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, GRV, \
+        FN8, NO,  NO,  NO,  NO,  NO,  NO,  WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+        LCTL,VOLD,VOLU,MUTE,NO,  NO,  NO,  MS_L,MS_D,MS_R,BTN1,NO,  ENT, \
+        LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,FN9, FN10,NO,  RSFT, \
+        LCTL,LGUI,LALT,          TRNS,                         TRNS,TRNS,TRNS),
+};
+
+
+/* id for user defined function/macro */
+enum function_id {
+    NONE,
+};
+
+enum macro_id {
+    ALT_TAB,
+};
+
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(1),                  // HHKB layer
+    [1] = ACTION_LAYER_TAP_KEY(1, KC_ENTER),          // HHKB layer
+    [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH),          // Cursor layer with Slash*
+    [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN),           // Mousekey layer with Semicolon*
+    [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC),            // Mousekey layer with Space
+    [5] = ACTION_LAYER_MOMENTARY(3),                  // Mousekey layer(IJKL)
+    [6] = ACTION_LAYER_TAP_KEY(MOD_RCTL, KC_ENT),      // RControl with tap Enter
+    [7] = ACTION_MODS_ONESHOT(MOD_LSFT),              // Oneshot Shift
+    [8] = ACTION_MACRO(ALT_TAB),                      // Application switching
+    [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
+   [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
+};
+
+
+/*
+ * Macro definition
+ */
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    switch (id) {
+        case ALT_TAB:
+            return (record->event.pressed ?
+                    MACRO( D(LALT), D(TAB), END ) :
+                    MACRO( U(TAB), END ));
+    }
+    return MACRO_NONE;
+}
diff --git a/keyboard/alps64/keymap_plain.c b/keyboard/alps64/keymap_plain.c
new file mode 100644
index 0000000000..a54899196a
--- /dev/null
+++ b/keyboard/alps64/keymap_plain.c
@@ -0,0 +1,12 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: qwerty */
+    KEYMAP( \
+        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, NUHS, BSPC, \
+        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS, \
+        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,  \
+        LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RSFT,ESC, \
+        LCTL,LGUI,LALT,          SPC,                     APP, RALT,RGUI,RCTL),
+};
+const uint16_t PROGMEM fn_actions[] = {};
diff --git a/keyboard/alps64/led.c b/keyboard/alps64/led.c
new file mode 100644
index 0000000000..d20c51aabe
--- /dev/null
+++ b/keyboard/alps64/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output high
+        DDRC |= (1<<5);
+        PORTC |= (1<<5);
+    } else {
+        // Hi-Z
+        DDRC &= ~(1<<5);
+        PORTC &= ~(1<<5);
+    }
+}
diff --git a/keyboard/alps64/matrix.c b/keyboard/alps64/matrix.c
new file mode 100644
index 0000000000..5638d7f69d
--- /dev/null
+++ b/keyboard/alps64/matrix.c
@@ -0,0 +1,200 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+#define LED_ON()    do { DDRC |= (1<<5); PORTC |= (1<<5); } while (0)
+#define LED_OFF()   do { DDRC &= ~(1<<5); PORTC &= ~(1<<5); } while (0)
+#define LED_TGL()   do { DDRC |= (1<<5); PINC |= (1<<5); } while (0)
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    //debug
+    debug_matrix = true;
+    LED_ON();
+    _delay_ms(500);
+    LED_OFF();
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+/* Column pin configuration
+ * col: 0   1   2   3   4   5   6   7
+ * pin: B0  B1  B2  B3  B4  B5  B6  B7
+ */
+static void  init_cols(void)
+{
+    // Input with pull-up(DDR:0, PORT:1)
+    DDRB  &= ~0b11111111;
+    PORTB |=  0b11111111;
+}
+
+/* Returns status of switches(1:on, 0:off) */
+static matrix_row_t read_cols(void)
+{
+    // Invert because PIN indicates 'switch on' with low(0) and 'off' with high(1)
+    return ~PINB;
+}
+
+/* Row pin configuration
+ * row: 0   1   2   3   4   5   6   7
+ * pin: D0  D1  D2  D3  D4  D5  D6  C2
+ */
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRD  &= ~0b01111111;
+    PORTD &= ~0b01111111;
+    DDRC  &= ~0b00000100;
+    PORTC &= ~0b00000100;
+}
+
+static void select_row(uint8_t row)
+{
+    // Output low(DDR:1, PORT:0) to select
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRD  |= (1<<1);
+            PORTD &= ~(1<<1);
+            break;
+        case 2:
+            DDRD  |= (1<<2);
+            PORTD &= ~(1<<2);
+            break;
+        case 3:
+            DDRD  |= (1<<3);
+            PORTD &= ~(1<<3);
+            break;
+        case 4:
+            DDRD  |= (1<<4);
+            PORTD &= ~(1<<4);
+            break;
+        case 5:
+            DDRD  |= (1<<5);
+            PORTD &= ~(1<<5);
+            break;
+        case 6:
+            DDRD  |= (1<<6);
+            PORTD &= ~(1<<6);
+            break;
+        case 7:
+            DDRC  |= (1<<2);
+            PORTC &= ~(1<<2);
+            break;
+    }
+}
diff --git a/keyboard/gh60/Makefile b/keyboard/gh60/Makefile
index b48ee3fde6..6b0f1a0e8d 100644
--- a/keyboard/gh60/Makefile
+++ b/keyboard/gh60/Makefile
@@ -42,7 +42,7 @@
 TARGET = gh60_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -128,8 +128,8 @@ NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/gh60/Makefile.pjrc b/keyboard/gh60/Makefile.pjrc
index 9655ff65a9..11bd3b7840 100644
--- a/keyboard/gh60/Makefile.pjrc
+++ b/keyboard/gh60/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = gh60_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -97,11 +97,11 @@ NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 plain: OPT_DEFS += -DKEYMAP_PLAIN
 plain: all
diff --git a/keyboard/ghost_squid/Makefile.lufa b/keyboard/ghost_squid/Makefile.lufa
index 61893893a4..54adb1e3d8 100644
--- a/keyboard/ghost_squid/Makefile.lufa
+++ b/keyboard/ghost_squid/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = ghostsquid_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -110,8 +110,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hbkb/Makefile.lufa b/keyboard/hbkb/Makefile.lufa
index 0d103c8766..322f219d69 100644
--- a/keyboard/hbkb/Makefile.lufa
+++ b/keyboard/hbkb/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = hbkb_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -113,8 +113,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile b/keyboard/hhkb/Makefile
index dc5c06a948..5a179bd24d 100644
--- a/keyboard/hhkb/Makefile
+++ b/keyboard/hhkb/Makefile
@@ -42,7 +42,7 @@
 TARGET = hhkb_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -120,6 +120,10 @@ NKRO_ENABLE = yes		# USB Nkey Rollover
 #KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
 #HHKB_JP = yes			# HHKB JP support
 
+#OPT_DEFS += -DNO_ACTION_TAPPING
+#OPT_DEFS += -DNO_ACTION_LAYER
+#OPT_DEFS += -DNO_ACTION_MACRO
+
 
 #
 # Keymap file
@@ -142,11 +146,11 @@ endif
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 debug-on: all
diff --git a/keyboard/hhkb/Makefile.pjrc b/keyboard/hhkb/Makefile.pjrc
index b6ce9c7504..7d0f8c3a9c 100644
--- a/keyboard/hhkb/Makefile.pjrc
+++ b/keyboard/hhkb/Makefile.pjrc
@@ -7,7 +7,7 @@
 TARGET = hhkb_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -61,8 +61,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.rn42 b/keyboard/hhkb/Makefile.rn42
index b1eacd070f..cbb2b744c9 100644
--- a/keyboard/hhkb/Makefile.rn42
+++ b/keyboard/hhkb/Makefile.rn42
@@ -42,7 +42,7 @@
 TARGET = hhkb_rn42
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -139,13 +139,13 @@ endif
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
 include rn42.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 debug-on: all
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt
index 98397b8477..3d08ceb0af 100644
--- a/keyboard/hhkb/doc/HHKB.txt
+++ b/keyboard/hhkb/doc/HHKB.txt
@@ -31,27 +31,28 @@ Two PCBs are connected by 15 lines(13 in case of Pro2).
 Vcc and GND use 3(2) lines each, other lines are for keyboard signaling.
 
     HHKB connector lines:
-    JP   Pro2   Pro     Function    Description                               Teensy++ pins
+    JP   Pro2   Pro     Function    Description                               TMK pin usage
     --------------------------------------------------------------------------------------------
                  1      Vcc(5V)                                               5V
      1    1      2      Vcc(5V)                                               5V
      2    2      3      Vcc(5V)                                               5V
-     3    3      4      TP1684      KEY: Low(0) when key pressed              PE6 input(with pullup)
-     4    4      5      TP1684      KEY_PREV: make threshold                  PE7 output
+     3    3      4      TP1684      ~KEY: Low(0) when key is pressed          PD7 input(with pullup)
+     4    4      5      TP1684      HYS: High(1) when key is pressed          PB7 output
      5    5      6      HC4051      A(bit0)\                                  PB0 output
      6    6      7      HC4051      B(bit1) > select row 0-7                  PB1 output
      7    7      8      HC4051      C(bit2)/                                  PB2 output
      8    8      9      LS145       A(bit0)\                                  PB3 output
      9    9     10      LS145       B(bit1) > select column 0-7               PB4 output
     10   10     11      LS145       C(bit2)/                                  PB5 output
-    11   11     12      LS145       D(enable) Low(0) enables selected column  PB6 output
+    11   11     12      LS145       ~D(enable) Low(0) enables selected column PB6 output
     12   12     13      GND                                                   GND
     13   13     14      GND                                                   GND
                 15      GND
-    14                  HC4051(Z2)  ~Enable of Z2   row0-7
-    15                  HC4051(Z3)  ~Enable of Z3   row8-15
+    14                  HC4051(Z2)  ~Enable of Z2   row0-7                    PC6
+    15                  HC4051(Z3)  ~Enable of Z3   row8-15                   PC7
 
-    NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
+    NOTE: Probably HYS changes threshold for upstroke and makes hysteresis in the result.
+    NOTE: HYS should be given High(1) when previous KEY state is Low(0).
     NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK.
     NOTE: JP has two HC4051(Z2,Z3) and line 5, 6 and 7 are connected to both of them.
 
@@ -112,7 +113,7 @@ Matrix diagram:
     |         <-+    |        <6-------|-|-|-|-|-|-|-|--|R|-+
     |   1   4 | |    |        <7-------|-|-|-|-|-|-|-|--|R|-+
     +---V---^-+ |    +-^-^-^--+        0 1 2 3 4 5 6 7  33K*8
-       KEY PREV |      A B C         +-----------------+
+       KEY HYS  |      A B C         +-----------------+
         |   | +-^----+ | | |         |      LS145      |
     Vcc |   | |BU9831| | | |         +-^--^--^--^------+
     --- |   | +------+ | | |           A  B  C  D   +-------+
@@ -138,7 +139,7 @@ Matrix diagram:
     |         | +---->        <6-----------|-|-|-|-|----|R|-+
     |         | | |  | A B C  <7-----------|-|-|-|-|----|R|-+
     +---V---^-+ | |  +-^-^-^--+            | | | | |        |
-       KEY PREV | |    | | |               | | | | |        |
+       KEY HYS  | |    | | |               | | | | |        |
         |   |   | |  +--------+            | | | | |        |
         |   |   | |  | HC4051 <8-----------|-|-|-|-|----|R|-+
         |   |   | |  |    Z3  <9-----------|-|-|-|-|----|R|-+
@@ -192,7 +193,7 @@ Signals charts
             0123456701234567    selected column
 
     3) Wait 5us after column select, then set prev, strobe colD to spit out key status and read it.
-    prev    _~~~~_____          20us if previous key state is low
+    hys     _~~~~_____          20us if previous key state is low
     colD    ~~~__~~~~~          10us strobe
     key     ~~~____~~~          22us indicates current state of the key
 
diff --git a/keyboard/hhkb/doc/HHKB_keycodes.txt b/keyboard/hhkb/doc/HHKB_keycodes.txt
new file mode 100644
index 0000000000..9ec85901e0
--- /dev/null
+++ b/keyboard/hhkb/doc/HHKB_keycodes.txt
@@ -0,0 +1,69 @@
+HHKB keycodes
+=============
+2015/10/03
+Looked into unclear keycodes(usages) of Fn-chording-key on HHKB.
+Followings are usages of Keyboard/Keypad Page(0x07) that HHKB spits out when Fn key is down.
+
+## HHK mode(Off-Off)
+    Key         Usage
+    ------------------------
+    ⌘ / ◇       0x78    Stop
+
+## Lite Ext. mode(On-Off)
+
+
+## Mac mode(Off-On)
+    Key         Usage
+    ------------------------
+    Esc         0x66    Power
+    A           0x81    Volume Down
+    S           0x80    Volume Up
+    D           0x7F    Mute
+    F           0x6F    F20
+    Delete      0x53    Num Lock and Clear
+
+
+## Secret mode(On-On)
+    Key         Usage
+    ------------------------
+    Esc         0x66    Power
+    Q           0x78    Stop
+    W           0x7E    Find
+    E           0x74    Execute
+    R           0x77    Select
+    T           0x76    Menu
+    Y           0x75    Help
+    Z           0x7A    Undo
+    X           0x7B    Cut
+    C           0x7C    Copy
+    V           0x7D    Paste
+    B           0x79    Again
+
+
+## Matrix Key-Mode
+
+
+                Mode
+                -------------------------------
+    Key         HHK     Lite    Mac     Secret  Desc
+    ---------------------------------------------------------------------------------------
+    ⌘ / ◇       0x78    -       -       -       Stop
+    Esc         -       -       0x66    0x66    Power
+    A           -       -       0x81    -       Volume Down
+    S           -       -       0x80    -       Volume Up
+    D           -       -       0x7F    -       Mute
+    F           -       -       0x6F    -       F20
+    Delete      0x2A    0x2A    0x53    0x2A    Num Lock and Clear(0x53)/Backspace(0x2A)
+    Q           -       -       -       0x78    Stop
+    W           -       -       -       0x7E    Find
+    E           -       -       -       0x74    Execute
+    R           -       -       -       0x77    Select
+    T           -       -       -       0x76    Menu
+    Y           -       -       -       0x75    Help
+    Z           -       -       -       0x7A    Undo
+    X           -       -       -       0x7B    Cut
+    C           -       -       -       0x7C    Copy
+    V           -       -       -       0x7D    Paste
+    B           -       -       -       0x79    Again
+
+EOF
diff --git a/keyboard/hhkb/keymap_hasu.c b/keyboard/hhkb/keymap_hasu.c
index 433f9cb270..a5602ded31 100644
--- a/keyboard/hhkb/keymap_hasu.c
+++ b/keyboard/hhkb/keymap_hasu.c
@@ -85,7 +85,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
      */
     [3] = \
     KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
-           FN8, NO,  NO,  NO,  NO,  NO,  NO,  WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+           FN8, NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,MS_U,WH_U,WH_R,FN9, FN10,FN8, \
            LCTL,ACL0,ACL1,ACL2,ACL2,NO,  NO,  MS_L,MS_D,MS_R,FN3, NO,  ENT, \
            LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,FN9, FN10,NO,  RSFT,TRNS, \
                 LGUI,LALT,          BTN1,               TRNS,TRNS),
@@ -106,7 +106,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
      */
     [4] = \
     KEYMAP(GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL, \
-           FN8, NO,  NO,  NO,  NO,  NO,  NO,  WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+           FN8, NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,MS_U,WH_U,WH_R,BTN4,BTN5,FN8, \
            LCTL,VOLD,VOLU,MUTE,NO,  NO,  NO,  MS_L,MS_D,MS_R,BTN1,NO,  ENT, \
            LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,FN9, FN10,NO,  RSFT,TRNS, \
                 LGUI,LALT,          TRNS,               TRNS,TRNS),
diff --git a/keyboard/hhkb/keymap_hhkb.c b/keyboard/hhkb/keymap_hhkb.c
index 1fc016f8e2..86ad0f5eee 100644
--- a/keyboard/hhkb/keymap_hhkb.c
+++ b/keyboard/hhkb/keymap_hhkb.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * HHKB Layout
  */
 #include "keymap_common.h"
@@ -40,7 +40,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
      * `-----------------------------------------------------------'
      *       |   |     |                       |     |   |
      *       `-------------------------------------------'
-     */ 
+     */
     KEYMAP(PWR, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, INS, DEL,   \
            CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC,      \
            TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT,            \
@@ -55,8 +55,41 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
  */
 #ifdef KEYMAP_SECTION_ENABLE
 const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
+    [0]  = ACTION_LAYER_MOMENTARY(1),
+    [1]  = ACTION_LAYER_MOMENTARY(2),
+    [2]  = ACTION_LAYER_MOMENTARY(3),
+    [3]  = ACTION_LAYER_MOMENTARY(4),
+    [4]  = ACTION_LAYER_MOMENTARY(5),
+    [5]  = ACTION_LAYER_MOMENTARY(6),
+    [6]  = ACTION_LAYER_MOMENTARY(7),
+    [7]  = ACTION_LAYER_TOGGLE(1),
+    [8]  = ACTION_LAYER_TOGGLE(2),
+    [9]  = ACTION_LAYER_TOGGLE(3),
+    [10] = ACTION_LAYER_TAP_TOGGLE(1),
+    [11] = ACTION_LAYER_TAP_TOGGLE(2),
+    [12] = ACTION_LAYER_TAP_TOGGLE(3),
+    [13] = ACTION_LAYER_TAP_KEY(1, KC_A),
+    [14] = ACTION_LAYER_TAP_KEY(2, KC_F),
+    [15] = ACTION_LAYER_TAP_KEY(3, KC_J),
+    [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
+    [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
+    [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
+    [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
+    [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
+    [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
+    [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
+    [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
+    [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+    [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
+    [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
+    [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
+    [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
+    [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
+    [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ESC),
+    [31] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_BSPACE),
+};
 #else
 const uint16_t fn_actions[] PROGMEM = {
-#endif
-    [0] = ACTION_LAYER_MOMENTARY(1),
+    [0]  = ACTION_LAYER_MOMENTARY(1),
 };
+#endif
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index fb96997944..14fae0b82c 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -132,7 +132,13 @@ uint8_t matrix_scan(void)
 
             // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
             // This takes 25us or more to make sure KEY_STATE returns to idle state.
+#ifdef HHKB_JP
+            // Looks like JP needs faster scan due to its twice larger matrix
+            // or it can drop keys in fast key typing
+            _delay_us(30);
+#else
             _delay_us(75);
+#endif
         }
         if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
     }
diff --git a/keyboard/hhkb/not_supported/Makefile.iwrap b/keyboard/hhkb/not_supported/Makefile.iwrap
index 2d9d82c481..1614c21d75 100644
--- a/keyboard/hhkb/not_supported/Makefile.iwrap
+++ b/keyboard/hhkb/not_supported/Makefile.iwrap
@@ -7,7 +7,7 @@
 TARGET = hhkb_iwrap
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -94,10 +94,10 @@ PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/iwrap.mk
+include $(TMK_DIR)/protocol/iwrap.mk
 # TODO: to be selectable: V-USB, LUFA or PJRC
-#include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+#include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/hhkb/not_supported/Makefile.vusb b/keyboard/hhkb/not_supported/Makefile.vusb
index 4343b210d9..1f8d84684b 100644
--- a/keyboard/hhkb/not_supported/Makefile.vusb
+++ b/keyboard/hhkb/not_supported/Makefile.vusb
@@ -7,7 +7,7 @@
 TARGET = hhkb_vusb
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -87,11 +87,11 @@ PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/vusb.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 debug-on: EXTRAFLAGS += -DDEBUG
 debug-on: all
diff --git a/keyboard/hid_liber/Makefile.lufa b/keyboard/hid_liber/Makefile.lufa
index c99d1a32f6..5fc4156a9e 100644
--- a/keyboard/hid_liber/Makefile.lufa
+++ b/keyboard/hid_liber/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = hid_liber_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -119,11 +119,11 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 ansi: OPT_DEFS += -DLAYOUT_ANSI
 ansi: all
diff --git a/keyboard/hid_liber/Makefile.pjrc b/keyboard/hid_liber/Makefile.pjrc
index 42fb6895e1..326bbe86f5 100644
--- a/keyboard/hid_liber/Makefile.pjrc
+++ b/keyboard/hid_liber/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = hid_liber_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -92,11 +92,11 @@ NKRO_ENABLE = yes           # USB Nkey Rollover - not yet supported in LUFA
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 ansi: OPT_DEFS += -DLAYOUT_ANSI
 ansi: all
diff --git a/keyboard/infinity/Makefile b/keyboard/infinity/Makefile
index e33c239afb..e740b6adbc 100644
--- a/keyboard/infinity/Makefile
+++ b/keyboard/infinity/Makefile
@@ -1,7 +1,7 @@
 PROJECT = infinity
 
-TMK_DIR = ../..
-MBED_DIR = $(TMK_DIR)/mbed-sdk
+TMK_DIR = ../../tmk_core
+MBED_DIR = $(TMK_DIR)/tool/mbed/mbed-sdk
 
 #VPATH += $(MBED_DIR):$(TMK_DIR)
 vpath %.s .:$(MBED_DIR):$(TMK_DIR)
diff --git a/keyboard/infinity/mbed-infinity.mk b/keyboard/infinity/mbed-infinity.mk
index f5fd2c9975..2c8d2e4372 100644
--- a/keyboard/infinity/mbed-infinity.mk
+++ b/keyboard/infinity/mbed-infinity.mk
@@ -19,29 +19,31 @@ OBJECTS += \
 	$(OBJDIR)/mbed-infinity/cmsis_nvic.o \
 	$(OBJDIR)/mbed-infinity/system_MK20D5.o \
 	$(OBJDIR)/mbed-infinity/USBHAL_KL25Z.o \
-	$(OBJDIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/analogin_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/gpio_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/gpio_irq_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/i2c_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/pinmap.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/port_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/pwmout_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/rtc_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/serial_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/sleep.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/spi_api.o \
-	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M/us_ticker.o
+	$(OBJDIR)/mbed-infinity/startup_MK20D5.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/analogin_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/gpio_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/gpio_irq_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/i2c_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/pinmap.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/port_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/pwmout_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/rtc_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/serial_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/sleep.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/spi_api.o \
+	$(OBJDIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/us_ticker.o
 
 INCLUDE_PATHS += \
 	-Imbed \
 	-I$(MBED_DIR)/libraries/mbed/targets \
 	-I$(MBED_DIR)/libraries/mbed/targets/cmsis \
 	-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale \
-	-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M \
-	-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM \
+	-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20XX \
+	-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M \
+	-I$(MBED_DIR)/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/TOOLCHAIN_GCC_ARM \
 	-I$(MBED_DIR)/libraries/mbed/targets/hal \
 	-I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale \
-	-I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20D50M
+	-I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX \
+	-I$(MBED_DIR)/libraries/mbed/targets/hal/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M
 
 LINKER_SCRIPT = mbed-infinity/infinity.ld
diff --git a/keyboard/infinity/mbed-infinity/README b/keyboard/infinity/mbed-infinity/README
index b0d226f793..43051c9003 100644
--- a/keyboard/infinity/mbed-infinity/README
+++ b/keyboard/infinity/mbed-infinity/README
@@ -37,3 +37,47 @@ Clock enable:
     SIM_SCGC4[USBOTG] = 1
 
 
+
+Infinity bootloader change
+==========================
+After @2c7542e(2015/01) Infinity bootloader doesn't disable watchdog timer and keyboard firmware has to do it itself.  mbed disables watchdog in startup sequence but unfortunately timer is timed out bofore that.
+
+We have to do that in earlier phase of mbed startup sequence.
+
+
+mbed starup sequence files:
+mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_M20D5.s
+mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/system_MK20D5.c
+
+Infinity booloader change commit:
+https://github.com/kiibohd/controller/commit/2c7542e2e7f0b8a99edf563dc53164fe1a439483
+
+discussion:
+https://geekhack.org/index.php?topic=41989.msg1686616#msg1686616
+
+
+WORKAROUND
+----------
+Call SystemInit early in Reset_Handler.
+
+$ diff -u ../../mbed-sdk/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.s mbed-infinity
+--- ../../mbed-sdk/libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.s      2015-03-22 10:33:22.779866000 +0900
++++ mbed-infinity/startup_MK20D5.s      2015-03-22 10:32:56.483866000 +0900
+@@ -147,6 +147,8 @@
+  *      __etext: End of code section, i.e., begin of data sections to copy from.
+  *      __data_start__/__data_end__: RAM address range that data should be
+  *      copied to. Both must be aligned to 4 bytes boundary.  */
++    ldr    r0, =SystemInit
++    blx    r0
+
+     ldr    r1, =__etext
+     ldr    r2, =__data_start__
+@@ -161,8 +163,6 @@
+
+ .Lflash_to_ram_loop_end:
+
+-    ldr    r0, =SystemInit
+-    blx    r0
+     ldr    r0, =_start
+     bx    r0
+     .pool
diff --git a/keyboard/infinity/mbed-infinity/startup_MK20D5.s b/keyboard/infinity/mbed-infinity/startup_MK20D5.s
new file mode 100644
index 0000000000..7a8d7ba45a
--- /dev/null
+++ b/keyboard/infinity/mbed-infinity/startup_MK20D5.s
@@ -0,0 +1,259 @@
+/* File: startup_MK20D5.s
+ * Purpose: startup file for Cortex-M4 devices. Should use with
+ *   GCC for ARM Embedded Processors
+ * Version: V1.3
+ * Date: 08 Feb 2012
+ *
+ * Copyright (c) 2012, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of the ARM Limited nor the
+      names of its contributors may be used to endorse or promote products
+      derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+    .syntax unified
+    .arch armv7-m
+
+    .section .stack
+    .align 3
+#ifdef __STACK_SIZE
+    .equ    Stack_Size, __STACK_SIZE
+#else
+    .equ    Stack_Size, 0x400
+#endif
+    .globl    __StackTop
+    .globl    __StackLimit
+__StackLimit:
+    .space    Stack_Size
+    .size __StackLimit, . - __StackLimit
+__StackTop:
+    .size __StackTop, . - __StackTop
+
+    .section .heap
+    .align 3
+#ifdef __HEAP_SIZE
+    .equ    Heap_Size, __HEAP_SIZE
+#else
+    .equ    Heap_Size, 0xC00
+#endif
+    .globl    __HeapBase
+    .globl    __HeapLimit
+__HeapBase:
+    .if    Heap_Size
+    .space    Heap_Size
+    .endif
+    .size __HeapBase, . - __HeapBase
+__HeapLimit:
+    .size __HeapLimit, . - __HeapLimit
+
+    .section .isr_vector
+    .align 2
+    .globl __isr_vector
+__isr_vector:
+    .long    __StackTop            /* Top of Stack */
+    .long    Reset_Handler         /* Reset Handler */
+    .long    NMI_Handler           /* NMI Handler */
+    .long    HardFault_Handler     /* Hard Fault Handler */
+    .long    MemManage_Handler     /* MPU Fault Handler */
+    .long    BusFault_Handler      /* Bus Fault Handler */
+    .long    UsageFault_Handler    /* Usage Fault Handler */
+    .long    0                     /* Reserved */
+    .long    0                     /* Reserved */
+    .long    0                     /* Reserved */
+    .long    0                     /* Reserved */
+    .long    SVC_Handler           /* SVCall Handler */
+    .long    DebugMon_Handler      /* Debug Monitor Handler */
+    .long    0                     /* Reserved */
+    .long    PendSV_Handler        /* PendSV Handler */
+    .long    SysTick_Handler       /* SysTick Handler */
+
+    /* External interrupts */
+    .long    DMA0_IRQHandler        /*  0:  Watchdog Timer            */
+    .long    DMA1_IRQHandler        /*  1:  Real Time Clock           */
+    .long    DMA2_IRQHandler       /*  2:  Timer0 / Timer1           */
+    .long    DMA3_IRQHandler       /*  3:  Timer2 / Timer3           */
+    .long    DMA_Error_IRQHandler       /*  4:  MCIa                      */
+    .long    0       /*  5:  MCIb                      */
+    .long    FTFL_IRQHandler      /*  6:  UART0 - DUT FPGA          */
+    .long    Read_Collision_IRQHandler      /*  7:  UART1 - DUT FPGA          */
+    .long    LVD_LVW_IRQHandler      /*  8:  UART2 - DUT FPGA          */
+    .long    LLW_IRQHandler      /*  9:  UART4 - not connected     */
+    .long    Watchdog_IRQHandler       /* 10: AACI / AC97                */
+    .long    I2C0_IRQHandler       /* 11: CLCD Combined Interrupt    */
+    .long    SPI0_IRQHandler       /* 12: Ethernet                   */
+    .long    I2S0_Tx_IRQHandler      /* 13: USB Device                 */
+    .long    I2S0_Rx_IRQHandler      /* 14: USB Host Controller        */
+    .long    UART0_LON_IRQHandler      /* 15: Character LCD              */
+    .long    UART0_RX_TX_IRQHandler    /* 16: Flexray                    */
+    .long    UART0_ERR_IRQHandler        /* 17: CAN                        */
+    .long    UART1_RX_TX_IRQHandler        /* 18: LIN                        */
+    .long    UART1_ERR_IRQHandler        /* 19: I2C ADC/DAC                */
+    .long    UART2_RX_TX_IRQHandler                     /* 20: Reserved                   */
+    .long    UART2_ERR_IRQHandler                     /* 21: Reserved                   */
+    .long    ADC0_IRQHandler                     /* 22: Reserved                   */
+    .long    CMP0_IRQHandler                     /* 23: Reserved                   */
+    .long    CMP1_IRQHandler                     /* 24: Reserved                   */
+    .long    FTM0_IRQHandler                     /* 25: Reserved                   */
+    .long    FTM1_IRQHandler                     /* 26: Reserved                   */
+    .long    CMT_IRQHandler                     /* 27: Reserved                   */
+    .long    RTC_IRQHandler   /* 28: Reserved - CPU FPGA CLCD   */
+    .long    RTC_Seconds_IRQHandler                     /* 29: Reserved - CPU FPGA        */
+    .long    PIT0_IRQHandler      /* 30: UART3    - CPU FPGA        */
+    .long    PIT1_IRQHandler        /* 31: SPI Touchscreen - CPU FPGA */
+    .long    PIT2_IRQHandler
+    .long    PIT3_IRQHandler
+    .long    PDB0_IRQHandler
+    .long    USB0_IRQHandler
+    .long    USBDCD_IRQHandler
+    .long    TSI0_IRQHandler
+    .long    MCG_IRQHandler
+    .long    LPTimer_IRQHandler
+    .long    PORTA_IRQHandler
+    .long    PORTB_IRQHandler
+    .long    PORTC_IRQHandler
+    .long    PORTD_IRQHandler
+    .long    PORTE_IRQHandler
+    .long    SWI_IRQHandler
+    .size    __isr_vector, . - __isr_vector
+
+    .section .text.Reset_Handler
+    .thumb
+    .thumb_func
+    .align 2
+    .globl    Reset_Handler
+    .type    Reset_Handler, %function
+Reset_Handler:
+/*     Loop to copy data from read only memory to RAM. The ranges
+ *      of copy from/to are specified by following symbols evaluated in
+ *      linker script.
+ *      __etext: End of code section, i.e., begin of data sections to copy from.
+ *      __data_start__/__data_end__: RAM address range that data should be
+ *      copied to. Both must be aligned to 4 bytes boundary.  */
+    ldr    r0, =SystemInit
+    blx    r0
+
+    ldr    r1, =__etext
+    ldr    r2, =__data_start__
+    ldr    r3, =__data_end__
+
+.Lflash_to_ram_loop:
+    cmp     r2, r3
+    ittt    lt
+    ldrlt   r0, [r1], #4
+    strlt   r0, [r2], #4
+    blt    .Lflash_to_ram_loop
+
+.Lflash_to_ram_loop_end:
+
+    ldr    r0, =_start
+    bx    r0
+    .pool
+    .size Reset_Handler, . - Reset_Handler
+
+    .text
+/*    Macro to define default handlers. Default handler
+ *    will be weak symbol and just dead loops. They can be
+ *    overwritten by other handlers */
+    .macro    def_default_handler    handler_name
+    .align 1
+    .thumb_func
+    .weak    \handler_name
+    .type    \handler_name, %function
+\handler_name :
+    b    .
+    .size    \handler_name, . - \handler_name
+    .endm
+
+    def_default_handler    NMI_Handler
+    def_default_handler    HardFault_Handler
+    def_default_handler    MemManage_Handler
+    def_default_handler    BusFault_Handler
+    def_default_handler    UsageFault_Handler
+    def_default_handler    SVC_Handler
+    def_default_handler    DebugMon_Handler
+    def_default_handler    PendSV_Handler
+    def_default_handler    SysTick_Handler
+    def_default_handler    Default_Handler
+
+    .macro    def_irq_default_handler    handler_name
+    .weak     \handler_name
+    .set      \handler_name, Default_Handler
+    .endm
+
+    def_irq_default_handler    DMA0_IRQHandler
+    def_irq_default_handler    DMA1_IRQHandler
+    def_irq_default_handler    DMA2_IRQHandler
+    def_irq_default_handler    DMA3_IRQHandler
+    def_irq_default_handler    DMA_Error_IRQHandler
+    def_irq_default_handler    FTFL_IRQHandler
+    def_irq_default_handler    Read_Collision_IRQHandler
+    def_irq_default_handler    LVD_LVW_IRQHandler
+    def_irq_default_handler    LLW_IRQHandler
+    def_irq_default_handler    Watchdog_IRQHandler
+    def_irq_default_handler    I2C0_IRQHandler
+    def_irq_default_handler    SPI0_IRQHandler
+    def_irq_default_handler    I2S0_Tx_IRQHandler
+    def_irq_default_handler    I2S0_Rx_IRQHandler
+    def_irq_default_handler    UART0_LON_IRQHandler
+    def_irq_default_handler    UART0_RX_TX_IRQHandler
+    def_irq_default_handler    UART0_ERR_IRQHandler
+    def_irq_default_handler    UART1_RX_TX_IRQHandler
+    def_irq_default_handler    UART1_ERR_IRQHandler
+    def_irq_default_handler    UART2_RX_TX_IRQHandler
+    def_irq_default_handler    UART2_ERR_IRQHandler
+    def_irq_default_handler    ADC0_IRQHandler
+    def_irq_default_handler    CMP0_IRQHandler
+    def_irq_default_handler    CMP1_IRQHandler
+    def_irq_default_handler    FTM0_IRQHandler
+    def_irq_default_handler    FTM1_IRQHandler
+    def_irq_default_handler    CMT_IRQHandler
+    def_irq_default_handler    RTC_IRQHandler
+    def_irq_default_handler    RTC_Seconds_IRQHandler
+    def_irq_default_handler    PIT0_IRQHandler
+    def_irq_default_handler    PIT1_IRQHandler
+    def_irq_default_handler    PIT2_IRQHandler
+    def_irq_default_handler    PIT3_IRQHandler
+    def_irq_default_handler    PDB0_IRQHandler
+    def_irq_default_handler    USB0_IRQHandler
+    def_irq_default_handler    USBDCD_IRQHandler
+    def_irq_default_handler    TSI0_IRQHandler
+    def_irq_default_handler    MCG_IRQHandler
+    def_irq_default_handler    LPTimer_IRQHandler
+    def_irq_default_handler    PORTA_IRQHandler
+    def_irq_default_handler    PORTB_IRQHandler
+    def_irq_default_handler    PORTC_IRQHandler
+    def_irq_default_handler    PORTD_IRQHandler
+    def_irq_default_handler    PORTE_IRQHandler
+    def_irq_default_handler    SWI_IRQHandler
+    def_irq_default_handler    DEF_IRQHandler
+
+/* Flash protection region, placed at 0x400 */
+    .text
+    .thumb
+    .align 2
+    .section .kinetis_flash_config_field,"a",%progbits
+kinetis_flash_config:
+    .long 0xffffffff
+    .long 0xffffffff
+    .long 0xffffffff
+    .long 0xfffffffe
+
+    .end
diff --git a/keyboard/infinity/tool/README b/keyboard/infinity/tool/README
index 3dd3316568..698314e250 100644
--- a/keyboard/infinity/tool/README
+++ b/keyboard/infinity/tool/README
@@ -2,7 +2,7 @@ OpenOCD config files for Kinetis
 ================================
 http://nemuisan.blog.bai.ne.jp/?eid=192848#OPENOCD
 
-These are needed for SWD debug and programing bootloader. To flash keyboard firmware use 'dfu-util'.
+These are needed for debug and programing bootloader with SWD. To flash keyboard firmware use 'dfu-util'.
 
 Flash security of Freescale kinetis
 -----------------------------------
@@ -21,5 +21,83 @@ Flash bootloader:
 
 Infinity SWD pinout
 -------------------
-SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, VCC from top.
+SWD pins are placed next to reset button; SWD_CLK, SWD_DIO, GND, 5V from top.
 Note that RESET is also needed to get full control with OpenOCD.
+
+             --------
+            | ___  o |CLK
+            ||RST| o |DIO
+            ||BTN| o |GND
+            | ---  o |5V
+             --------
+
+
+Kinetis sercure state
+----------------------
+openocd 0.9.0
+
+Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********
+Warn : ****                                                          ****
+Warn : **** Your Kinetis MCU is in secured state, which means that,  ****
+Warn : **** with exception for very basic communication, JTAG/SWD    ****
+Warn : **** interface will NOT work. In order to restore its         ****
+Warn : **** functionality please issue 'kinetis mdm mass_erase'      ****
+Warn : **** command, power cycle the MCU and restart OpenOCD.        ****
+Warn : ****                                                          ****
+Warn : *********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********
+
+
+Info : MDM: Chip is unsecured. Continuing.
+target state: halted
+target halted due to debug-request, current mode: Thread
+xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
+auto erase enabled
+Info : Probing flash info for bank 0
+Warn : flash configuration field erased, please reset the device
+wrote 4096 bytes from file kiibohd_bootloader.bin in 2.442562s (1.638 KiB/s)
+Info : MDM: Chip is unsecured. Continuing.
+
+
+
+
+Open On-Chip Debugger 0.9.0-dev-00346-g3e1dfdc-dirty (2015-03-21-20:41)
+Licensed under GNU GPL v2
+For bug reports, read
+        http://openocd.sourceforge.net/doc/doxygen/bugs.html
+Info : only one transport option; autoselect 'cmsis-dap'
+Kinetis MUST need Hardware SRST Control to Recover Secure-State!
+adapter_nsrst_delay: 200
+srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
+Info : add flash_bank kinetis k20.pflash
+cortex_m reset_config sysresetreq
+adapter speed: 1000 kHz
+srst_only separate srst_nogate srst_open_drain connect_assert_srst
+Info : CMSIS-DAP: SWD  Supported
+Info : CMSIS-DAP: Interface Initialised (SWD)
+Info : CMSIS-DAP: FW Version = 1.0
+Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
+Info : Connecting under reset
+Info : DAP_SWJ Sequence (reset: 50+ '1' followed by 0)
+Info : CMSIS-DAP: Interface ready
+Info : clock speed 1000 kHz
+Info : IDCODE 0x2ba01477
+Warn : Adapter returned success despite SSTICKYERR being set.
+Warn : Adapter returned success despite SSTICKYERR being set.
+Warn : Adapter returned success despite SSTICKYERR being set.
+Warn : Adapter returned success despite SSTICKYERR being set.
+Info : k20.cpu: hardware has 6 breakpoints, 4 watchpoints
+Info : MDM: Chip is unsecured. Continuing.
+Info : MDM: Chip is unsecured. Continuing.
+target state: halted
+target halted due to debug-request, current mode: Thread
+xPSR: 0x01000000 pc: 0xfffffffe msp: 0xfffffffc
+auto erase enabled
+Info : Probing flash info for bank 0
+Warn : flash configuration field erased, please reset the device
+wrote 4096 bytes from file kiibohd_bootloader.bin in 2.446902s (1.635 KiB/s)
+Info : MDM: Chip is unsecured. Continuing.
+Info : Halt timed out, wake up GDB.
+Error: timed out while waiting for target halted
+Runtime Error: tool/k20dx32_flash.cfg:81:
+in procedure 'mt_flash'
+in procedure 'halt' called at file "tool/k20dx32_flash.cfg", line 81
diff --git a/keyboard/infinity/tool/k20dx32_flash.cfg b/keyboard/infinity/tool/k20dx32_flash.cfg
index 714d9991f8..1e3deb0910 100644
--- a/keyboard/infinity/tool/k20dx32_flash.cfg
+++ b/keyboard/infinity/tool/k20dx32_flash.cfg
@@ -2,6 +2,22 @@
 # Nemuisan's Special for MK20DN32VFT5,MK20DX32VFT5,MK10DN32VFT5,MK10DX32VFT5
 
 
+# 0.8.0 has no these procs
+proc using_jtag {} {
+        set _TRANSPORT [ transport select ]
+        expr { [ string first "jtag" $_TRANSPORT ] != -1 }
+}
+
+proc using_swd {} {
+        set _TRANSPORT [ transport select ]
+        expr { [ string first "swd" $_TRANSPORT ] != -1 }
+}
+
+proc using_hla {} {
+        set _TRANSPORT [ transport select ]
+        expr { [ string first "hla" $_TRANSPORT ] != -1 }
+}
+
 source [find target/swj-dp.tcl]
 
 if { [info exists CHIPNAME] } {
@@ -109,7 +125,6 @@ proc eraser {} {
 	shutdown
 }
 
-
 #debug_level 3
 # HLA doesn't have cortex_m commands 
 if {![using_hla]} {
diff --git a/keyboard/kitten_paw/Makefile.lufa b/keyboard/kitten_paw/Makefile.lufa
index 4a643ea790..a45a3edb96 100644
--- a/keyboard/kitten_paw/Makefile.lufa
+++ b/keyboard/kitten_paw/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = kittenpaw_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -110,8 +110,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/kmac/Makefile.lufa b/keyboard/kmac/Makefile.lufa
index 09343d4bc4..9745f43cd4 100644
--- a/keyboard/kmac/Makefile.lufa
+++ b/keyboard/kmac/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = kmac_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -117,11 +117,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 winkey: OPT_DEFS += -DLAYOUT_WINKEY
 winkey: all
diff --git a/keyboard/kmac/Makefile.pjrc b/keyboard/kmac/Makefile.pjrc
index 22ee8de47a..b32d935bdf 100644
--- a/keyboard/kmac/Makefile.pjrc
+++ b/keyboard/kmac/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = kmac_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -88,11 +88,11 @@ BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 winkey: OPT_DEFS += -DLAYOUT_WINKEY
 winkey: all
diff --git a/keyboard/lightpad/Makefile.lufa b/keyboard/lightpad/Makefile.lufa
index 7bce7ebffc..88fb90ec4b 100644
--- a/keyboard/lightpad/Makefile.lufa
+++ b/keyboard/lightpad/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = lightpad_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -110,8 +110,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/lightsaber/Makefile.lufa b/keyboard/lightsaber/Makefile.lufa
index b430efd229..99090c4367 100644
--- a/keyboard/lightsaber/Makefile.lufa
+++ b/keyboard/lightsaber/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = lightsaber_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -116,11 +116,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 winkey: OPT_DEFS += -DLAYOUT_WINKEY
 winkey: all
diff --git a/keyboard/lightsaber/Makefile.pjrc b/keyboard/lightsaber/Makefile.pjrc
index 58735a7ef0..0f6d399470 100644
--- a/keyboard/lightsaber/Makefile.pjrc
+++ b/keyboard/lightsaber/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = lightsaber_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -84,11 +84,11 @@ BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 winkey: OPT_DEFS += -DLAYOUT_WINKEY
 winkey: all
diff --git a/keyboard/macway/Makefile.lufa b/keyboard/macway/Makefile.lufa
index 359a8c246d..8fff93ada5 100644
--- a/keyboard/macway/Makefile.lufa
+++ b/keyboard/macway/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = macway_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -114,8 +114,8 @@ COMMAND_ENABLE = yes    # Commands for debug and configuration
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/macway/Makefile.pjrc b/keyboard/macway/Makefile.pjrc
index 9e84a34185..6ee25b61af 100644
--- a/keyboard/macway/Makefile.pjrc
+++ b/keyboard/macway/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = macway_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -90,8 +90,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/mbed_onekey/Makefile b/keyboard/mbed_onekey/Makefile
index b1e5f5e594..b9c88fdd31 100644
--- a/keyboard/mbed_onekey/Makefile
+++ b/keyboard/mbed_onekey/Makefile
@@ -1,6 +1,6 @@
 PROJECT = mbed_onekey
 
-TMK_DIR = ../..
+TMK_DIR = ../../tmk_core
 MBED_DIR = $(TMK_DIR)/mbed-sdk
 
 #VPATH += $(MBED_DIR):$(TMK_DIR)
diff --git a/keyboard/nerd/Makefile b/keyboard/nerd/Makefile
index 5fd382841f..30149345ce 100644
--- a/keyboard/nerd/Makefile
+++ b/keyboard/nerd/Makefile
@@ -42,7 +42,7 @@
 TARGET = nerd_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -119,8 +119,8 @@ BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/Makefile b/keyboard/onekey/Makefile
index 78732e470d..0b54e7d25c 100644
--- a/keyboard/onekey/Makefile
+++ b/keyboard/onekey/Makefile
@@ -42,7 +42,7 @@
 TARGET = onekey_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -124,9 +124,9 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/Makefile.pjrc b/keyboard/onekey/Makefile.pjrc
index 24ade33505..ebf0710f73 100644
--- a/keyboard/onekey/Makefile.pjrc
+++ b/keyboard/onekey/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = onekey_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -95,9 +95,9 @@ PS2_USE_BUSYWAIT = yes # uses primitive reference code
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/Makefile.vusb b/keyboard/onekey/Makefile.vusb
new file mode 100644
index 0000000000..fb1fbdfea2
--- /dev/null
+++ b/keyboard/onekey/Makefile.vusb
@@ -0,0 +1,88 @@
+# Target file name (without extension).
+TARGET = onekey_vusb
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = 	keymap.c \
+    	matrix.c \
+	led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = atmega168p
+MCU = atmega328p
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 12000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#MOUSEKEY_ENABLE = yes	# Mouse keys
+#EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBasp           2048
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/rules.mk
diff --git a/keyboard/onekey/usbconfig.h b/keyboard/onekey/usbconfig.h
new file mode 100644
index 0000000000..d0ca4c717e
--- /dev/null
+++ b/keyboard/onekey/usbconfig.h
@@ -0,0 +1,377 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      10
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x01
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     't', '.', 'm', '.', 'k', '.'
+#define USB_CFG_VENDOR_NAME_LEN 6
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
+#define USB_CFG_DEVICE_NAME_LEN 23
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+//#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+#endif /* __usbconfig_h_included__ */
diff --git a/keyboard/phantom/Makefile.lufa b/keyboard/phantom/Makefile.lufa
index 97756de0a1..a0b3b1444d 100644
--- a/keyboard/phantom/Makefile.lufa
+++ b/keyboard/phantom/Makefile.lufa
@@ -42,7 +42,7 @@
 TARGET = phantom_lufa
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -115,11 +115,11 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 ansi: OPT_DEFS += -DLAYOUT_ANSI
 ansi: all
diff --git a/keyboard/phantom/Makefile.pjrc b/keyboard/phantom/Makefile.pjrc
index aa01ac5ab2..7bf5f80f40 100644
--- a/keyboard/phantom/Makefile.pjrc
+++ b/keyboard/phantom/Makefile.pjrc
@@ -42,7 +42,7 @@
 TARGET = phantom_pjrc
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -86,11 +86,11 @@ COMMAND_ENABLE = yes    # Commands for debug and configuration
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
 
 ansi: OPT_DEFS += -DLAYOUT_ANSI
 ansi: all
diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
index 643646155f..fc26905d80 100644
--- a/keyboard/planck/Makefile
+++ b/keyboard/planck/Makefile
@@ -44,6 +44,7 @@ TARGET = planck
 
 # Directory common source filess exist
 TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -133,6 +134,7 @@ BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
 # Search Path
 VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
 include $(TOP_DIR)/quantum.mk
 
diff --git a/keyboard/planck/__avr_gdbinit b/keyboard/planck/__avr_gdbinit
deleted file mode 100644
index afc51e6d19..0000000000
--- a/keyboard/planck/__avr_gdbinit
+++ /dev/null
@@ -1,6 +0,0 @@
-define reset
-SIGNAL SIGHUP
-end
-file planck_lufa.elf
-target remote localhost:4242
-break main