quark

28 files changed, 2481 insertions, 0 deletions

diff --git a/keyboard/quark/Makefile b/keyboard/quark/Makefile
new file mode 100644
index 0000000000..df012064d1
--- /dev/null
+++ b/keyboard/quark/Makefile
@@ -0,0 +1,155 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = quark_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+
+# # project specific files
+ifdef COMMON
+
+	SRC = keymap_common.c \
+	matrix_handwire.c \
+	led.c \
+	backlight.c
+
+ifdef KEYMAP
+    SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := common_keymaps/keymap_jack.c $(SRC)
+endif
+
+else
+
+SRC = extended_keymap_common.c \
+	matrix_handwire.c \
+	led.c \
+	backlight.c
+
+ifdef KEYMAP
+    SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := extended_keymaps/extended_keymap_jack.c $(SRC)
+endif
+
+endif
+
+CONFIG_H = config.h
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/quark/Makefile.pjrc b/keyboard/quark/Makefile.pjrc
new file mode 100644
index 0000000000..be83ba18b1
--- /dev/null
+++ b/keyboard/quark/Makefile.pjrc
@@ -0,0 +1,116 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = gh60_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC =	keymap_common.c \
+	matrix.c \
+	led.c
+
+ifdef KEYMAP
+    SRC := keymap_$(KEYMAP).c $(SRC)
+else
+    SRC := keymap_jack.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u4
+#MCU = at90usb1286
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+plain: OPT_DEFS += -DKEYMAP_PLAIN
+plain: all
+
+poker: OPT_DEFS += -DKEYMAP_POKER
+poker: all
+
+poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
+poker_set: all
+
+poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
+poker_bit: all
diff --git a/keyboard/quark/README.md b/keyboard/quark/README.md
new file mode 100644
index 0000000000..59afbab1ae
--- /dev/null
+++ b/keyboard/quark/README.md
@@ -0,0 +1,53 @@
+Quark keyboard firmware
+======================
+DIY/Assembled compact 40% keyboard by [Ortholinear Keyboards](http://ortholinearkeyboards.com).
+
+## Extended Keymap
+If you include extended_keymap_common.h instead of keymap_common.h at the top of your file, you'll have access to a bunch of goodies:
+
+- Use `LSFT()`, `LCTL()`, et. al. (listed in extended_keymap_common.h) as modifiers for keys (daisy-chain-able)
+- Use `FUNC(1)` instead of `FN1` (etc.) to access the function layers beyond the 32 function layer limit
+- Use `CM_F` instead of `KC_F` to get the ColeMak equivilent for shortcuts (maps backwards)
+- Use `MACRODOWN()` instead of `MACRO()` to easily make a keydown macro (`CM_*` works here too)
+
+### Some notes on usage:
+
+- The `KEYMAP()` macro is unable to be used due to the bitwise modifications that take place - refer to extended_keymap_jack.c to see how to set things up with the `KC_` prefix
+- Keep an eye on the Makefile - this needs to include the correct files to work
+- Don't forget to use `const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {` instead of the 8bit equivilent
+
+## Build
+
+Follow [this guide](http://deskthority.net/workshop-f7/how-to-build-your-very-own-keyboard-firmware-t7177.html) to setup your development environment before anything else. Abbreviated instructions are provide at the [bottom of this document](https://github.com/rswiernik/tmk_keyboard/tree/rswiernik_dev/keyboard/quark#environment-setup)
+
+Download the whole firmware [here](https://github.com/jackhumbert/tmk_keyboard/archive/master.zip) and navigate to the keyboard/quark folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex that you can load with the Teensy app onto your Planck (once you've hit reset/shorted GND & RST). 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+####Default
+To build with the default keymap, simply move to the tmk\_keyboard/keyboard/quark/ and run `make` as follows:
+```
+$ make
+```
+
+## Keymap
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document (you can find in top README.md) and existent keymap files.
+    
+####**Extended Keymaps**
+
+To build the firmware binary hex file with an extended keymap just do `make` with `KEYMAP` option like:
+```
+$ make KEYMAP=[common|jack|<name>]
+```
+_The only applicable keymaps will work with this option._ Extended keymaps follow the format **__extended\_keymap\_\<name\>.c__**
+
+####**Common Keymaps**
+
+Building with a common keymap is as simple as adding the COMMON option. Note that only 
+```
+$ make KEYMAP=[common|jack|<name>] COMMON=true
+```
+_The only applicable keymaps will work with this option._ Common keymaps follow the format **__keymap\_\<name\>.c__**
+
+## Notable TMK forks (which some of the keymap files are from)
+- (add yours)
diff --git a/keyboard/quark/backlight.c b/keyboard/quark/backlight.c
new file mode 100644
index 0000000000..ee7e31ee9c
--- /dev/null
+++ b/keyboard/quark/backlight.c
@@ -0,0 +1,46 @@
+
+#include <avr/io.h>
+#include "backlight.h"
+
+
+void backlight_init_ports()
+{
+    // Setup PB7 as output and output low.
+    DDRB |= (1<<7);
+    PORTB &= ~(1<<7);
+    
+    // Use full 16-bit resolution. 
+    ICR1 = 0xFFFF;
+
+    // I could write a wall of text here to explain... but TL;DW
+    // Go read the ATmega32u4 datasheet.
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // (i.e. start high, go low when counter matches.)
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    
+    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+    
+    // Default to zero duty cycle.
+    OCR1C = 0x0000;
+}
+
+void backlight_set(uint8_t level)
+{
+    if ( level == 0 )
+    {
+        // Turn off PWM control on PB7, revert to output low.
+        TCCR1A &= ~(_BV(COM1C1));
+    }
+    else
+    {
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        OCR1C = level << 12 | 0x0FFF;
+    }
+}
+
diff --git a/keyboard/quark/backlight.h b/keyboard/quark/backlight.h
new file mode 100644
index 0000000000..0fe1f4a72b
--- /dev/null
+++ b/keyboard/quark/backlight.h
@@ -0,0 +1,2 @@
+
+void backlight_init_ports(void);
diff --git a/keyboard/quark/common_keymaps/keymap_brett.c b/keyboard/quark/common_keymaps/keymap_brett.c
new file mode 100644
index 0000000000..97d832b47a
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_brett.c
@@ -0,0 +1,42 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( 
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, RSFT,
+  TAB, LGUI,  RSFT, LALT, FN2,     SPC,     FN1,  LEFT, DOWN, UP,   RGHT),
+[1] = KEYMAP( /* RAISE */
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    DEL,
+  TRNS, F1,   F2,   F3,   F4,   F5,   F6,   4,    5,    6,   QUOT, TRNS,
+  TRNS, F7,   F8,   F9,   F10,  F11,  F12,  1,    2,    3,   TRNS, PGUP,
+  MPRV, MNXT, TRNS, MUTE, TRNS,    TRNS,    FN1,  0,  0,  TRNS, PGDN),
+[2] = KEYMAP( /* LOWER */
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS,
+  TRNS, TRNS, TRNS, PAUSE, TRNS, TRNS, TRNS, TRNS, LBRC, RBRC, BSLS, EQL,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  MPLY, MSTP, VOLU, VOLD, FN2,     TRNS,    TRNS, TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay 
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_dotcom.c b/keyboard/quark/common_keymaps/keymap_dotcom.c
new file mode 100644
index 0000000000..347f6dea91
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_dotcom.c
@@ -0,0 +1,34 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( 
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  FN1,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, LBRC,
+  LCTL, BSLS, QUOT, LALT, FN22,    SPC,     LEFT, UP, DOWN, RGHT,  RBRC),
+[1] = KEYMAP( 
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    DEL,
+  TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17,  TRNS, TRNS, TRNS,
+  TRNS, FN18,  FN19,  FN22,  EQL,  MINS,  FN20,  TRNS,  TRNS,  TRNS,  TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,   FN1,  TRNS, VOLD, VOLU, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_jack.c b/keyboard/quark/common_keymaps/keymap_jack.c
new file mode 100644
index 0000000000..c74812121f
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_jack.c
@@ -0,0 +1,50 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Jack */
+  TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  ESC,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+  RSFT, LCTL, LALT, LGUI, FN2,    SPC,     FN1, LEFT, DOWN, UP,  RGHT),
+[1] = KEYMAP( /* Jack colemak */
+  TAB,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, BSPC,
+  ESC,  A,    R,    S,    T,    D,    H,    N,    E,    I,    O,     QUOT,
+  LSFT, Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH, ENT,
+  FN3, LCTL, LALT, LGUI, FN2,    SPC,     FN1, LEFT, DOWN, UP,  RGHT),
+[2] = KEYMAP( /* Jack RAISE */
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    BSPC,
+  TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC, BSLS,
+  TRNS, F11,  F12,  F13,  F14,  F15,  F16,  F17,  F18,  F19,  F20, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,   FN1,  MNXT, VOLD, VOLU, MPLY),
+[3] = KEYMAP( /* Jack LOWER */
+  FN22, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+  TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS, F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  TRNS,
+  TRNS, TRNS, TRNS, TRNS, FN2,    TRNS,    TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),  
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_joe.c b/keyboard/quark/common_keymaps/keymap_joe.c
new file mode 100644
index 0000000000..07122b702c
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_joe.c
@@ -0,0 +1,107 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Joe colemak */
+  ESC,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, MINS,
+  BSPC, A,    R,    S,    T,    D,    H,    N,    E,    I,    O,    ENT,
+  TAB,  Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH, QUOT,
+  LCTL, LGUI, LALT, LSFT, FN1,    SPC,      FN0,  LEFT, DOWN, UP,  RGHT),
+[1] = KEYMAP( /* Joe qwerty */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    MINS,
+  BSPC, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  TAB,  Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, QUOT,
+  LCTL, LGUI, LALT, LSFT, FN1,    SPC,      FN0,  LEFT, DOWN, UP,  RGHT),
+[2] = KEYMAP( /* Joe RAISE */
+  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,
+  DEL,  FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS,
+  BSLS, FN5,  FN6,  TRNS, TRNS, MENU, CAPS, INS,  PSCR, LBRC, RBRC, FN21,
+  TRNS, TRNS, TRNS, TRNS, FN2,     TRNS,    FN0,  FN26, FN27, FN28, FN29),
+[3] = KEYMAP( /* Joe LOWER */
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN7, FN8, FN9, FN30, FN31,
+  DEL,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    TRNS,
+  FN25, FN3,  FN4,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN23, FN24, EQL,
+  TRNS, TRNS, TRNS, TRNS, FN1,    TRNS,     FN2,  HOME, PGDN, PGUP, END),
+[4] = KEYMAP( /* Joe LOWER + RAISE */
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,     TRNS,   TRNS, MNXT, VOLD, VOLU, MPLY),
+};
+
+enum macro_id {
+    M_Q0,
+    M_Q1,
+    M_Q2,
+    M_Q3,
+    M_Q4
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [1] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(4),  // to Fn overlay
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0), 
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [5] = ACTION_MODS_KEY(MOD_LCTL, KC_PGDN),
+    [6] = ACTION_MODS_KEY(MOD_LCTL, KC_PGUP),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [7] = ACTION_MACRO(M_Q0),
+    [8] = ACTION_MACRO(M_Q1),
+    [9] = ACTION_MACRO(M_Q2),
+    [30] = ACTION_MACRO(M_Q3),
+    [31] = ACTION_MACRO(M_Q4),
+
+    [26] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_LEFT),
+    [27] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_DOWN),
+    [28] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_UP),
+    [29] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT, KC_RGHT),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{ 
+    keyevent_t event = record->event;
+    switch (id) {
+        case M_Q0:
+            return event.pressed ?
+                MACRO( D(LSFT), T(SCLN), U(LSFT), T(SLSH), END ) :
+                MACRO_NONE;
+        case M_Q1:
+            return event.pressed ?
+                MACRO( D(LSFT), T(SCLN), T(9), U(LSFT), END ) :
+                MACRO_NONE;
+        case M_Q2:
+            return event.pressed ?
+                MACRO( D(LSFT), T(0), T(SCLN), U(LSFT), END ) :
+                MACRO_NONE;
+        case M_Q3:
+            return event.pressed ?
+                MACRO( D(LSFT), T(9), T(SCLN), U(LSFT), END ) :
+                MACRO_NONE;
+        case M_Q4:
+            return event.pressed ?
+                MACRO( D(LSFT), T(SCLN), T(0), U(LSFT), END ) :
+                MACRO_NONE;
+
+    }
+    return MACRO_NONE;
+}
\ No newline at end of file
diff --git a/keyboard/quark/common_keymaps/keymap_matthew.c b/keyboard/quark/common_keymaps/keymap_matthew.c
new file mode 100644
index 0000000000..56e7003a97
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_matthew.c
@@ -0,0 +1,70 @@
+// by Matthew Pepers - https://github.com/pepers
+
+/* grid planck layout - modified programmer dvorak
+,-----------------------------------------------------------------------------------------------.
+| pause |   @   |   |   |   ^   |       |       |       |       |   *   |   #   |   $   |  del  |
+|  esc  |  ; :  |  , <  |  . >  |   P   |   Y   |   F   |   G   |   G   |   C   |   R   | bkspc |
+|  F1   |  F2   |  F3   |  F4   |  F5   |  F6   |  F7   |  F8   |  F9   |  F10  |  F11  |  F12  |
+|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
+|   &   |   /   |   {   |   (   |   [   |   =   |   !   |   ]   |   )   |   }   |   \   |   +   |
+|  ` ~  |   A   |   O   |   E   |   U   |   I   |   D   |   H   |   T   |   N   |   S   |  - _  |
+|   %   |   7   |   5   |   3   |   1   |   9   |   0   |   2   |   4   |   6   |   8   |   ?   |
+|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
+|       |       |       |       |       |       |       |       |       |       |       | prtsc |
+|  tab  |  ' "  |   Q   |   J   |   K   |   X   |   B   |   M   |   W   |   V   |   Z   | retrn |
+|       |       |       |       |       |       |       |       |       |       |       | insrt |
+|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|-------|
+|       |       |       |       |       |       |       |       |       |       |       |       |
+| lctrl | lgui  | lalt  | ralt  | lower | shift | space | raise | left  | down  |  up   | right |
+|       |       |       |       |       |       |       |       | home  | pgdn  | pgup  |  end  |
+`-----------------------------------------------------------------------------------------------'
+*/
+
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: dvorak */
+  [0] = KEYMAP_GRID( ESC, SCLN, COMM,  DOT,    P,    Y,    F,    G,    C,    R,    L, BSPC,   \
+                     GRV,    A,    O,    E,    U,    I,    D,    H,    T,    N,    S, MINS,   \
+                     TAB, QUOT,    Q,    J,    K,    X,    B,    M,    W,    V,    Z,  ENT,   \
+                    LCTL, LGUI, LALT, RALT,  FN1, LSFT,  SPC,  FN2, LEFT, DOWN,   UP, RGHT),
+
+  /* 1: lower (FN1) */
+  [1] = KEYMAP_GRID( F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,  F10,  F11,  F12,   \
+                   FN17,    7,    5,    3,    1,    9,    0,    2,    4,    6,    8, FN18,   \
+                   TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,  INS,   \
+                   TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP,  END),
+
+  /* 2: raise (FN2) */
+  [2] = KEYMAP_GRID(PAUS, FN19, FN20, FN21, TRNS, TRNS, TRNS, TRNS, FN22, FN23, FN24,  DEL,   \
+                    FN10, SLSH, FN11, FN12, LBRC,  EQL, FN13, RBRC, FN14, FN15, BSLS, FN16,   \
+                    TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR,   \
+                    TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
+
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),               // lower Fn layer
+    [2] = ACTION_LAYER_MOMENTARY(2),               // raise Fn layer
+
+    // lower row1
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_5),        // %
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_SLASH),    // ?
+    
+    // raise row0
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2),        // @
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLASH),   // |
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_6),        // ^
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_8),        // *
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_3),        // #
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_4),        // $
+    
+    // raise row1
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_7),        // &
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRACKET), // {
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_9),        // (
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_1),        // !
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_0),        // )
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRACKET), // }
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_EQUAL),    // +
+};
diff --git a/keyboard/quark/common_keymaps/keymap_nathan.c b/keyboard/quark/common_keymaps/keymap_nathan.c
new file mode 100644
index 0000000000..5a0900b66d
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_nathan.c
@@ -0,0 +1,153 @@
+// Author: Nathan Ross Powell <nathanrospowell@gmail.com>
+// https://github.com/nathanrosspowell/tmk_keyboard/blob/planck-jack/keyboard/planck/keymap_nathan.c
+
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   /* 0: main layer
+    * ,-----------------------------------------------------------------------.
+    * |Tab  | q   | w   | e   | r   | t   | y   | u   | i   | o   | p   | BS  |
+    * |-----------------------------------------------------------------------|
+    * |Ctrl | a   | s   | d   | f   | g   | h   | j   | k   | l   | ;   | Ret |
+    * |-----------------------------------------------------------------------|
+    * |Shift| z   | x   | c   | v   | b   | n   | m   | [   | (   | {   | <   |
+    * |-----------------------------------------------------------------------|
+    * |Meta | \   | /   | Alt |Lower|Space|Space|Upper|Left |Down | Up  |Right|
+    * `-----------------------------------------------------------------------'
+    */
+  [0] = KEYMAP_GRID(
+       TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+       LCTL, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+       RSFT, Z,    X,    C,    V,    B,    N,    M,    LBRC, FN10, FN11, FN12,
+       LGUI, BSLS, SLSH, LALT, FN0,  SPC,  SPC,  FN1,  LEFT, DOWN, UP,   RGHT),
+
+   /* 1: fn left/lower layer
+    * The top row are Visual Studio combos:
+    *   'Run', 'Breakpoint', 'Step over', 'Step into', 'Set cursor to line'
+    * 2nd row are key combos:
+    *   'ctrl-alt-delete', 'ctrl-shift-escape'
+    * 3rd row are macros keys:
+    *   'P0' - 'P5' execute a script on Windows machines
+    * ,-----------------------------------------------------------------------.
+    * | ESC | F5   | F9 | F10 | F11 |S+F11|CSF10|NLock|Num7 |Num8 |Num9 | Del |
+    * |-----------------------------------------------------------------------|
+    * |     |C/A/D|C/S/E| Ins |Print|Pause|SLock|Num0 |Num4 |Num5 |Num6 |Num= |
+    * |-----------------------------------------------------------------------|
+    * |     | P0  | P1  | P2  | P3  | P4  | P5  |Num. |Num1 |Num2 |Num3 |Num/ |
+    * |-----------------------------------------------------------------------|
+    * |     |User |     |     |     |     |     |     |Home |PgDn |PgUp | End |
+    * `-----------------------------------------------------------------------'
+    */
+  [1] = KEYMAP_GRID(
+       ESC,  F5,   F9,   F10,  F11,  FN30, FN31, NLCK, P7,   P8,   P9,   DEL,
+       TRNS, FN16, FN17, INS,  PSCR, PAUS, SLCK, P0,   P4,   P5,   P6,   PEQL,
+       TRNS, FN2,  FN3,  FN4,  FN5,  FN6,  FN7,  PDOT, P1,   P2,   P3,   PSLS,
+       TRNS, FN8,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, HOME, PGDN, PGUP, END ),
+
+  /* 2: fn right/raise layer
+    * ,-----------------------------------------------------------------------.
+    * | F1  | F2  | F3  | F4  |F5   | F6  | F7  | F8  | F9  | F10 | F11 | F12 |
+    * |-----------------------------------------------------------------------|
+    * |     | !   | @   | #   | $   | %   | ^   | &   | *   | -   | +   | =   |
+    * |-----------------------------------------------------------------------|
+    * |     | _   | '   | "   | `   | ~   | ,   | .   | ]   | )   | }   | >   |
+    * |-----------------------------------------------------------------------|
+    * |     |NextT|PrevT|     |     |     | Esc |     |Mute |Vol- |Vol+ | P/P |
+    * `-----------------------------------------------------------------------'
+    */
+  [2] = KEYMAP_GRID(
+       F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,
+       TRNS, FN18, FN19, FN20, FN21, FN22, FN23, FN24, FN25, MINS, FN26, PAST,
+       TRNS, FN27, QUOT, FN28, GRV,  FN29, COMM, DOT,  RBRC, FN13, FN14, FN15,
+       TRNS, MNXT, MPRV, TRNS, TRNS, TRNS, ESC,  TRNS, MUTE, VOLD, VOLU, MPLY ),
+};
+
+enum macro_id {
+    M_P0,
+    M_P1,
+    M_P2,
+    M_P3,
+    M_P4,
+    M_P5,
+    M_USERNAME
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0] = ACTION_LAYER_MOMENTARY(1), // left/lower layer
+  [1] = ACTION_LAYER_MOMENTARY(2), // right/raise layer
+  // Program macros
+  [2] = ACTION_MACRO(M_P0),
+  [3] = ACTION_MACRO(M_P1),
+  [4] = ACTION_MACRO(M_P2),
+  [5] = ACTION_MACRO(M_P3),
+  [6] = ACTION_MACRO(M_P4),
+  [7] = ACTION_MACRO(M_P5),
+  [8] = ACTION_MACRO(M_USERNAME),
+  // Braces
+  [10] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
+  [11] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
+  [12] = ACTION_MODS_KEY(MOD_LSFT, KC_COMMA), // <
+  [13] = ACTION_MODS_KEY(MOD_LSFT, KC_0),  // )
+  [14] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // }
+  [15] = ACTION_MODS_KEY(MOD_LSFT, KC_DOT), // >
+  // Combo
+  [16] = ACTION_MODS_KEY(MOD_LALT | MOD_LCTL, KC_DEL), // Ctrl+Alt+Delete
+  [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_ESC), // Ctrl+Shft+Escape
+  // Symbols
+  [18] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // !
+  [19] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @
+  [20] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // #
+  [21] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $
+  [22] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // %
+  [23] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
+  [24] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
+  [25] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
+  [26] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
+  [27] = ACTION_MODS_KEY(MOD_LSFT, KC_MINUS), // _
+  [28] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOTE), // "
+  [29] = ACTION_MODS_KEY(MOD_LSFT, KC_GRAVE), // ~
+  // Debugging
+  [30] = ACTION_MODS_KEY(MOD_LSFT, KC_F11), // Step into
+  [31] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F10), // Set cursor to line
+ };
+
+// Run a script and pass a key number to it. This is Windows specific and the script needs to be on your path.
+// *open run dialog* keypress.py [PRG_NUM]
+#define ADD_PYTHON_PROGRAM_ON_WIN( PRG_NUM )  MACRO( D(LGUI), T(R), U(LGUI), W(100), T(K), T(E), T(Y), T(P), T(R), T(E), T(S), T(S), T(DOT), T(P), T(Y), T(SPC), T(PRG_NUM), END )
+// *return*
+#define RUN_PYTHON_PROGRAM_ON_WIN MACRO( T(ENT), END )
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+    keyevent_t event = record->event;
+    switch (id) {
+        case M_P0:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 0 ) :
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P1:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 1 ) :
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P2:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 2 ) :
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P3:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 3 ) :
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P4:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 4 ) :
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_P5:
+            return event.pressed ?
+                ADD_PYTHON_PROGRAM_ON_WIN( 5 ) :
+                RUN_PYTHON_PROGRAM_ON_WIN;
+        case M_USERNAME:
+            return event.pressed ?
+                MACRO( T(N), T(A), T(T), T(H), T(A), T(N), T(R), T(O), T(S), T(S), T(P), T(O), T(W), T(E), T(L), T(L), END ) :
+                MACRO_NONE;
+    }
+    return MACRO_NONE;
+}
diff --git a/keyboard/quark/common_keymaps/keymap_peasant.c b/keyboard/quark/common_keymaps/keymap_peasant.c
new file mode 100644
index 0000000000..ddacb614e6
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_peasant.c
@@ -0,0 +1,51 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = KEYMAP( /* Native */
+      ESC,     Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    FN2, 
+      BSPC,    A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+      TAB,     Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+      DEL,     LCTL, NO,   LSFT, LALT, SPC,        NO,   LEFT, DOWN, UP,  RGHT), 
+    [1] = KEYMAP( /* QWERTY->PHOTOSHOP */
+      DELETE,  0,    1,    2,    3,    4,    5,    6,    7,    8,    9,    FN1,
+      O,       G,    S,    U,    T,    FN27,  F21,  F10,  F11,  F7,   F8,   F9,
+      TAB,     FN4, FN5,  FN6,  F1,   FN7,  F18,  F19,  F23,  F20,  F22,  FN9,
+      COMM,    DOT,  FN10, FN11, FN3,  SPC,        FN12, F2,   FN8,  F3,   F14),
+    [2] = KEYMAP( /* 2: FN3 PHOTOSHOP */
+      ESC,    FN25, FN26,   NO,   NO,   NO,   NO,   NO,   NO,   NO,   NO,   NO,
+      NO,      NO,   NO,   NO,   NO,   NO,   NO,   NO,   NO,   FN19, FN20, FN21, 
+      C,       NO,  FN22,  FN5,   NO,   FN23, NO,   NO,   NO,   NO,   FN13, NO,
+      FN14,    FN15, FN16, FN17, FN3,   SPC,        FN18, NO,   NO,   F24,  NO),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_DEFAULT_LAYER_SET(0),                             // set Qwerty layout
+    [2] = ACTION_DEFAULT_LAYER_SET(1),                             // set Photoshop presets
+    [3] = ACTION_LAYER_ON_OFF(2),                                  // Photoshop function layer
+ 
+    [4] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F9),   // photo folder AHK
+    [5] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_I),              // select inverse
+    [6] = ACTION_MODS_KEY(MOD_LSFT, KC_M),                         // marquee select
+    [7] = ACTION_MODS_KEY(MOD_LALT, KC_BSPC),                      // fill 
+    [8] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_X),    // warp
+    [9] = ACTION_MODS_KEY(MOD_LCTL | MOD_LALT | MOD_LSFT, KC_F12),  // merge all new layer
+    [10] = ACTION_MODS_KEY(MOD_LCTL, KC_MINS),                     // zoom out
+    [11] = ACTION_MODS_KEY(MOD_LCTL, KC_H),                        // RBG sliders
+    [12] = ACTION_MODS_KEY(MOD_LCTL, KC_S),                        // save
+    [13] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_F5),           // layer mask from transparancy 
+    [14] = ACTION_MODS_KEY(MOD_LALT, KC_LBRC),                     // prev layer
+    [15] = ACTION_MODS_KEY(MOD_LALT, KC_RBRC),                     // next layer
+    [16] = ACTION_MODS_KEY(MOD_LCTL, KC_EQL),                      // zoom in
+    [17] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_H),             // HSV sliders
+    [18] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F11), // save as PNG
+    [19] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F7),  // gaussian blur
+    [20] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL | MOD_LALT, KC_F8),  // motion blur
+    [21] = ACTION_MODS_KEY(MOD_LSFT | MOD_LCTL, KC_X),            // liquify filter
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),                     // prev layer blending
+    [23] = ACTION_MODS_KEY(MOD_LSFT | MOD_LALT, KC_N),             // normal layer blending
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),                      // next layer blending
+    [25] = ACTION_MODS_KEY(MOD_LCTL, KC_Z),                        // step back
+    [26] = ACTION_MODS_KEY(MOD_LCTL, KC_Y),                        // step forward
+    [27] = ACTION_MODS_KEY(MOD_LCTL, KC_R),                        // rasterize
+     
+};
diff --git a/keyboard/quark/common_keymaps/keymap_reed.c b/keyboard/quark/common_keymaps/keymap_reed.c
new file mode 100644
index 0000000000..1aa24e10de
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_reed.c
@@ -0,0 +1,74 @@
+#include "keymap_common.h"
+
+/*
+ * BUILD:
+ * Simply run the command below in the keyboard/planck directory
+ * to build against this keymap
+ *
+ *    make KEYMAP=reed COMMON_KEYMAP=true
+ *
+ *
+ * DETAILS:
+ *
+ * This layout works off of Jack's layout, making some changes that I
+ * feel significantly improve the function of the keyboard. Major changes
+ * include adding a "gaming mode" that will allow users to still access
+ * the number keys 1 through 4 easily for games that require it. Also
+ * included is the ability to use the tap/hold function for easy use of
+ * right shift and thumb shift with their tapped companions.
+ *
+ */
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP_GRID( /* Reed */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, FN5,
+  LCTL, CAPS, LALT, LGUI, FN2, FN7,  SPC,  FN1,   LEFT, DOWN, UP,  RGHT),
+
+[1] = KEYMAP_GRID( /* Reed EXTREME GAMING */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, FN5,
+  LCTL, 1,    2,    3,    4,   SPC,  FN2,  FN1,   LEFT, DOWN, UP,  RGHT),
+
+[2] = KEYMAP_GRID( /* Reed RAISE */
+  GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    BSPC,
+  TRNS, FN3, FN4, PAUSE, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC,  BSLS,
+  TRNS, F1,   F2,    F3,   F4,   F5,   F6,   F7,  F8,    F9,  F10,  TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN1, MNXT, VOLD, VOLU, MPLY),
+
+[3] = KEYMAP_GRID( /* Reed LOWER */
+  TRNS,  FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, DEL,
+  TRNS,  TRNS, INS, HOME, PGUP, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS,  TRNS, DEL,  END, PGDN,  F11,  F12,  F13,  TRNS, VOLD, VOLU, TRNS,
+  TRNS,  TRNS, TRNS, TRNS, FN2,  TRNS, TRNS, TRNS, MPRV, MUTE, MPLY, MNXT),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay - RAISE
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay - LOWER
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+	// Actions for the tap/hold modifiers listed above
+    [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+    [7] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPC),
+	
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_sean.c b/keyboard/quark/common_keymaps/keymap_sean.c
new file mode 100644
index 0000000000..4fe07f701a
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_sean.c
@@ -0,0 +1,57 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = KEYMAP( /* Matrix Dvorak */
+      QUOT, COMM,  DOT,    P,    Y, SLSH,  EQL,    F,    G,    C,    R,    L,
+         A,    O,    E,    U,    I,  ESC, BSPC,    D,    H,    T,    N,    S,
+      SCLN,    Q,    J,    K,    X,  TAB,  ENT,    B,    M,    W,    V,    Z,
+      LSFT, LCTL, LALT, LGUI,  FN1,  SPC,        FN2, LEFT, DOWN,   UP, RGHT),
+
+    [1] = KEYMAP( /* Matrix Qwerty */
+         Q,    W,    E,    R,    T, QUOT,  EQL,    Y,    U,    I,    O,    P,
+         A,    S,    D,    F,    G,  ESC, BSPC,    H,    J,    K,    L, SCLN,
+         Z,    X,    C,    V,    B,  TAB,  ENT,    N,    M, COMM,  DOT, SLSH,
+      LSFT, LCTL, LALT, LGUI,  FN1,  SPC,        FN2, LEFT, DOWN,   UP, RGHT),
+      
+    [2] = KEYMAP( /* fn1 lower */
+        F1,   F2,   F3,   F4,   F5, TRNS, TRNS,   F6,   F7,   F8,   F9,  F10,
+         1,    2,    3,    4,    5,  F18,  DEL,    6,    7,    8,    9,    0,
+       FN3,  FN4, TRNS,  GRV, MINS, TRNS, TRNS, BSLS, LBRC, RBRC, TRNS, TRNS,
+      TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,        FN5, HOME, PGDN, PGUP,  END),
+
+    [3] = KEYMAP( /* fn2 raise */
+        F1,   F2,   F3,   F4,   F5, TRNS, TRNS,   F6,   F7,   F8,   F9,  F10,
+       F11,  F12,  F13,  F14,  F15,  F18,  DEL,  F16,  F17,  F18,  F19,  F20,
+       FN3,  FN4, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT,  PWR, LSFT,PAUSE, RSFT,
+      LEFT, DOWN,   UP, RGHT,  FN5, TRNS,       TRNS, MNXT, VOLD, VOLU, MUTE),
+
+    [4] = KEYMAP( /* lower + raise */
+      LEFT, DOWN,   UP, RGHT, TRNS, TRNS, TRNS, TRNS, LEFT, DOWN,   UP, RGHT,
+      HOME, PGDN, PGUP,  END, TRNS,  F18,  DEL, TRNS, HOME, PGDN, PGUP,  END,
+      FN3,  FN4,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, EJCT,  PWR, MPLY, RSFT,
+      TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       TRNS, MNXT, VOLD, VOLU, MUTE),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay LOWER
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay RAISE
+    [3] = ACTION_DEFAULT_LAYER_SET(0), 
+    [4] = ACTION_DEFAULT_LAYER_SET(1),  
+    [5] = ACTION_LAYER_MOMENTARY(4),  // to Fn overlay LOWER + RAISE
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_shane.c b/keyboard/quark/common_keymaps/keymap_shane.c
new file mode 100644
index 0000000000..d4e40fe63a
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_shane.c
@@ -0,0 +1,100 @@
+// https://github.com/shanecelis/tmk_keyboard/blob/master/keyboard/planck/keymap_shane.c
+
+#include "keymap_common.h"
+#include "action_layer.h"
+#include "action.h"
+#include "action_util.h"
+
+/*
+  Shane's Planck Layout
+  http://www.keyboard-layout-editor.com/#/layouts/015d9011102619d7695c86ffe57cf441
+*/
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP_AND_SWAP( /* Base */
+    TAB,	Q,	W,	E,	R,	T,	Y,	U,	I,	O,	P,	MINS,
+    LCTL,	A,	S,	D,	F,	G,	H,	J,	K,	L,	SCLN,	BSPC,
+    LSFT,	Z,	X,	C,	V,	B,	N,	M,	COMM,	DOT,	SLSH,	FN5,
+    /*ALPHA*/FN3,	/*HYPER*/	/*SUPER*/LGUI, /*META*/LALT, LCTL,	FN2,	FN6,	FN1,	LEFT,	DOWN,	UP,	RGHT),
+  [2] = KEYMAP_AND_SWAP( /* More modifiers */
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS, RCTL, RALT, RGUI,	TRNS),
+  [4] = KEYMAP_AND_SWAP( /* WASD */
+    TRNS,	TRNS,	UP,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	LEFT,	DOWN,	RIGHT,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS, TRNS, TRNS, TRNS, TRNS),
+  [6] = KEYMAP_AND_SWAP( /* Raise/FN1 */
+    FN23,	1,	2,	3,	4,	5,	6,	7,	8,	9,	0,	EQL,
+    TRNS,	F1,	F2,	F3,	F4,	F5,	F6,	F7,	F8,	F9,	F10,	ENT,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	BSLS,	TRNS,
+    PAUS,	TRNS,	TRNS,	TRNS,	TRNS,	BSPC,	TRNS,	MUTE,	PGUP,	PGDN,	MNXT),
+  [8] = KEYMAP_AND_SWAP( /* Lower/FN2 */
+    ESC,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	FN19,	FN20,	TRNS,
+    TRNS,	TRNS,	TRNS,	TRNS,	CAPS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	QUOT,
+    TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	TRNS,	FN24,	FN25,	LBRC,	RBRC,	TRNS,	TRNS,
+    FN4,	TRNS,	TRNS,	TRNS,	TRNS,	ENT,	TRNS,	MPLY,	VOLD,	VOLU,	MPRV),
+};
+
+enum function_id {
+  SPACE_FN,
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch (id) {
+  case SPACE_FN:
+    if (record->event.pressed) {
+      // Change the keyboard maps.
+      // Whatever even layer's are on, turn on the odd one's too.
+      for (uint8_t i = 0; i < 9; i += 2) {
+        if (layer_state & (1UL << i))
+          layer_on(i + 1);
+      }
+      layer_on(1);
+    } else {
+      // turn off all the even layers.
+      for (uint8_t i = 0; i < 9; i += 2)
+        layer_off(i + 1);
+
+      if (record->tap.count != 0) {
+        // Space was tapped rather than used like a modifier.
+        // So send a space up and down event.
+        add_key(KC_SPC);
+        send_keyboard_report();
+        del_key(KC_SPC);
+        send_keyboard_report();
+      }
+    }
+    break;
+  }
+}
+
+
+
+const uint16_t PROGMEM fn_actions[] = {
+  [1] = ACTION_LAYER_MOMENTARY(6),  // to fist Fn overlay
+  [2] = ACTION_LAYER_MOMENTARY(8),  // to second Fn overlay
+  [3] = ACTION_LAYER_TOGGLE(2), // toggle more modifiers
+  [4] = ACTION_LAYER_TOGGLE(4), // toggle wasd
+  [5] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_ENT),
+  [6] = ACTION_FUNCTION_TAP(SPACE_FN),
+
+  [11] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+  [12] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+  [13] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+  [14] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+  [15] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+  [16] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+  [17] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+  [18] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+  [19] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+  [20] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+  [21] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+  [22] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+  [23] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+  [24] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+  [25] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+  [26] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_simon.c b/keyboard/quark/common_keymaps/keymap_simon.c
new file mode 100644
index 0000000000..37951364be
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_simon.c
@@ -0,0 +1,44 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Jack */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    DOT,  ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SCLN, DEL,
+  LCTL, ENT,  LALT, CAPS, FN2,    SPC,      FN1,  LEFT, DOWN, UP,   RGHT),
+[1] = KEYMAP( /* Jack RAISE */
+  TRNS, F1,   F2,   F3,   F4,   NO,   FN11, FN9,  FN12, NO,   FN14, TRNS,
+  TRNS, F5,   F6,   F7,   F8,   FN16, SLSH, MINS, EQL,  LBRC, FN8,  TRNS,
+  TRNS, F9,   F10,  F11,  F12,  F15,  F16,  FN22, SCLN, MINS, QUOT, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,    TRNS, TRNS, TRNS, TRNS, TRNS),
+[2] = KEYMAP( /* Jack LOWER */
+  FN22, 1,    2,    3,   FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+  TRNS, 4,    5,    6,   TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS, 7,    8,    9,   0,    FN28, FN15,   F7,   F8,   F9,   F10,  TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,    TRNS, TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(1),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+
+    [8]  = ACTION_MODS_KEY(MOD_LSFT, KC_SLSH),
+    [9]  = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT),
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+
+    [29] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_tim.c b/keyboard/quark/common_keymaps/keymap_tim.c
new file mode 100644
index 0000000000..7444f3877b
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_tim.c
@@ -0,0 +1,44 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP(
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, ENT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, RSFT,
+  LCTL, LALT, DEL,  LGUI, FN2,    SPC,     FN1,   F2,   F5,   F9,   F12),
+[2] = KEYMAP( /* RAISE */
+  TRNS,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,   BSPC,
+  GRV,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC, BSLS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS,    TRNS,    FN1,  TRNS, TRNS, TRNS, TRNS),
+[3] = KEYMAP( /* LOWER */
+  TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, BSPC,
+  FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, FN20, FN21, FN23, FN24, FN28,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, QUOT, FN29, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, FN2,    TRNS,     TRNS, TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),  
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
+    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
+    [29] = ACTION_MODS_KEY(MOD_LSFT, KC_QUOT),
+};
diff --git a/keyboard/quark/common_keymaps/keymap_wilba.c b/keyboard/quark/common_keymaps/keymap_wilba.c
new file mode 100644
index 0000000000..9781f8fcd8
--- /dev/null
+++ b/keyboard/quark/common_keymaps/keymap_wilba.c
@@ -0,0 +1,56 @@
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Wilba */
+  FN27, FN28, FN29, E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+  LCTL, LGUI, LALT, RSFT, FN1,  SPC,        FN2,  LEFT, DOWN, UP,   RGHT),
+[1] = KEYMAP( /* Wilba Alternate */
+  ESC,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    BSPC,
+  TAB,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,
+  LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH, ENT,
+  LCTL, LGUI, LALT, RSFT, FN1,  SPC,        FN2,  LEFT, DOWN, UP,   RGHT),
+[2] = KEYMAP( /* Wilba LOWER */
+  TRNS, 1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    TRNS,
+  TRNS, F11,  F12,  LBRC, RBRC, FN20, EQL,  FN23, FN24, MINS, FN21, TRNS,
+  TRNS, BSLS, GRV,  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, FN1,  TRNS,       TRNS, MNXT, VOLD, VOLU, MPLY),
+[3] = KEYMAP( /* Wilba RAISE */
+  TRNS, FN10, FN11, FN12, FN13, FN14, FN15, FN16, FN17, FN18, FN19, TRNS,
+  TRNS, F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  TRNS,  
+  TRNS, FN25, FN22, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,
+  TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,       FN2,  TRNS, TRNS, TRNS, TRNS),
+};
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // LOWER
+    [2] = ACTION_LAYER_MOMENTARY(3),  // RAISE
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),  
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1), // !
+    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2), // @
+    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3), // #
+    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4), // $
+    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5), // %
+    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6), // ^
+    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7), // &
+    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
+    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
+    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // )
+    
+    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _
+    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
+    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~
+    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC), // {
+    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC), // }
+    [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // |
+
+    [26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
+    
+    [27] = ACTION_BACKLIGHT_TOGGLE(),
+    [28] = ACTION_BACKLIGHT_INCREASE(),
+    [29] = ACTION_BACKLIGHT_DECREASE()
+    
+};
diff --git a/keyboard/quark/config.h b/keyboard/quark/config.h
new file mode 100644
index 0000000000..7f9a48ce4d
--- /dev/null
+++ b/keyboard/quark/config.h
@@ -0,0 +1,74 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    jackhumbert
+#define PRODUCT         Quark
+#define DESCRIPTION     t.m.k. keyboard firmware for the Quark
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+/* NOTE: this is the max value of 0..BACKLIGHT_LEVELS so really 16 levels. */
+#define BACKLIGHT_LEVELS 15
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboard/quark/extended_keymap_common.c b/keyboard/quark/extended_keymap_common.c
new file mode 100644
index 0000000000..f8fc3209fb
--- /dev/null
+++ b/keyboard/quark/extended_keymap_common.c
@@ -0,0 +1,184 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "extended_keymap_common.h"
+#include "report.h"
+#include "keycode.h"
+#include "action_layer.h"
+#include "action.h"
+#include "action_macro.h"
+#include "debug.h"
+
+
+static action_t keycode_to_action(uint16_t keycode);
+
+
+/* converts key to action */
+action_t action_for_key(uint8_t layer, keypos_t key)
+{
+	// 16bit keycodes - important
+    uint16_t keycode = keymap_key_to_keycode(layer, key);
+
+    if (keycode >= 0x0100 && keycode < 0x2000) {
+    	// Has a modifier
+    	action_t action;
+    	// Split it up
+    	action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF);
+    	return action;
+	} else if (keycode >= 0x2000 && keycode < 0x3000) {
+		// Is a shortcut for function layer, pull last 12bits
+        return keymap_func_to_action(keycode & 0xFFF);
+	} else if (keycode >= 0x3000 && keycode < 0x4000) {
+    	action_t action;
+    	action.code = ACTION_MACRO(keycode & 0xFF);
+    	return action;
+	}
+
+    switch (keycode) {
+        case KC_FN0 ... KC_FN31:
+            return keymap_fn_to_action(keycode);
+#ifdef BOOTMAGIC_ENABLE
+        case KC_CAPSLOCK:
+        case KC_LOCKING_CAPS:
+            if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) {
+                return keycode_to_action(KC_LCTL);
+            }
+            return keycode_to_action(keycode);
+        case KC_LCTL:
+            if (keymap_config.swap_control_capslock) {
+                return keycode_to_action(KC_CAPSLOCK);
+            }
+            return keycode_to_action(KC_LCTL);
+        case KC_LALT:
+            if (keymap_config.swap_lalt_lgui) {
+                if (keymap_config.no_gui) {
+                    return keycode_to_action(ACTION_NO);
+                }
+                return keycode_to_action(KC_LGUI);
+            }
+            return keycode_to_action(KC_LALT);
+        case KC_LGUI:
+            if (keymap_config.swap_lalt_lgui) {
+                return keycode_to_action(KC_LALT);
+            }
+            if (keymap_config.no_gui) {
+                return keycode_to_action(ACTION_NO);
+            }
+            return keycode_to_action(KC_LGUI);
+        case KC_RALT:
+            if (keymap_config.swap_ralt_rgui) {
+                if (keymap_config.no_gui) {
+                    return keycode_to_action(ACTION_NO);
+                }
+                return keycode_to_action(KC_RGUI);
+            }
+            return keycode_to_action(KC_RALT);
+        case KC_RGUI:
+            if (keymap_config.swap_ralt_rgui) {
+                return keycode_to_action(KC_RALT);
+            }
+            if (keymap_config.no_gui) {
+                return keycode_to_action(ACTION_NO);
+            }
+            return keycode_to_action(KC_RGUI);
+        case KC_GRAVE:
+            if (keymap_config.swap_grave_esc) {
+                return keycode_to_action(KC_ESC);
+            }
+            return keycode_to_action(KC_GRAVE);
+        case KC_ESC:
+            if (keymap_config.swap_grave_esc) {
+                return keycode_to_action(KC_GRAVE);
+            }
+            return keycode_to_action(KC_ESC);
+        case KC_BSLASH:
+            if (keymap_config.swap_backslash_backspace) {
+                return keycode_to_action(KC_BSPACE);
+            }
+            return keycode_to_action(KC_BSLASH);
+        case KC_BSPACE:
+            if (keymap_config.swap_backslash_backspace) {
+                return keycode_to_action(KC_BSLASH);
+            }
+            return keycode_to_action(KC_BSPACE);
+#endif
+        default:
+            return keycode_to_action(keycode);
+    }
+}
+
+
+/* Macro */
+__attribute__ ((weak))
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+    return MACRO_NONE;
+}
+
+/* Function */
+__attribute__ ((weak))
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+}
+
+/* translates keycode to action */
+static action_t keycode_to_action(uint16_t keycode)
+{
+    action_t action;
+    switch (keycode) {
+        case KC_A ... KC_EXSEL:
+        case KC_LCTRL ... KC_RGUI:
+            action.code = ACTION_KEY(keycode);
+            break;
+        case KC_SYSTEM_POWER ... KC_SYSTEM_WAKE:
+            action.code = ACTION_USAGE_SYSTEM(KEYCODE2SYSTEM(keycode));
+            break;
+        case KC_AUDIO_MUTE ... KC_WWW_FAVORITES:
+            action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
+            break;
+        case KC_MS_UP ... KC_MS_ACCEL2:
+            action.code = ACTION_MOUSEKEY(keycode);
+            break;
+        case KC_TRNS:
+            action.code = ACTION_TRANSPARENT;
+            break;
+        default:
+            action.code = ACTION_NO;
+            break;
+    }
+    return action;
+}
+
+
+/* translates key to keycode */
+uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+	// Read entire word (16bits)
+    return pgm_read_word(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint16_t keycode)
+{
+    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
+
+action_t keymap_func_to_action(uint16_t keycode)
+{
+	// For FUNC without 8bit limit
+    return (action_t){ .code = pgm_read_word(&fn_actions[(int)keycode]) };
+}
diff --git a/keyboard/quark/extended_keymap_common.h b/keyboard/quark/extended_keymap_common.h
new file mode 100644
index 0000000000..66712459c6
--- /dev/null
+++ b/keyboard/quark/extended_keymap_common.h
@@ -0,0 +1,152 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_H
+#define KEYMAP_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "action.h"
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "keymap.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+
+#ifdef BOOTMAGIC_ENABLE
+/* NOTE: Not portable. Bit field order depends on implementation */
+typedef union {
+    uint16_t raw;
+    struct {
+        bool swap_control_capslock:1;
+        bool capslock_to_control:1;
+        bool swap_lalt_lgui:1;
+        bool swap_ralt_rgui:1;
+        bool no_gui:1;
+        bool swap_grave_esc:1;
+        bool swap_backslash_backspace:1;
+        bool nkro:1;
+    };
+} keymap_config_t;
+keymap_config_t keymap_config;
+#endif
+
+/* translates key to keycode */
+uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint16_t keycode);
+
+/* translates Fn keycode to action */
+action_t keymap_func_to_action(uint16_t keycode);
+
+extern const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+// Ability to use mods in layouts
+#define LCTL(kc) kc | 0x0100
+#define LSFT(kc) kc | 0x0200
+#define LALT(kc) kc | 0x0400
+#define LGUI(kc) kc | 0x0800
+#define RCTL(kc) kc | 0x1100
+#define RSFT(kc) kc | 0x1200
+#define RALT(kc) kc | 0x1400
+#define RGUI(kc) kc | 0x1800
+
+// Alias for function layers than expand past FN31
+#define FUNC(kc) kc | 0x2000
+
+// Aliases
+#define S(kc) LSFT(kc)
+#define F(kc) FUNC(kc)
+
+// For software implementation of colemak
+#define CM_Q    KC_Q
+#define CM_W    KC_W
+#define CM_F    KC_E
+#define CM_P    KC_R
+#define CM_G    KC_T
+#define CM_J    KC_Y
+#define CM_L    KC_U
+#define CM_U    KC_I
+#define CM_Y    KC_O
+#define CM_SCLN KC_P
+
+#define CM_A    KC_A
+#define CM_R    KC_S
+#define CM_S    KC_D
+#define CM_T    KC_F
+#define CM_D    KC_G
+#define CM_H    KC_H
+#define CM_N    KC_J
+#define CM_E    KC_K
+#define CM_I    KC_L
+#define CM_O    KC_SCLN
+
+#define CM_Z    KC_Z
+#define CM_X    KC_X
+#define CM_C    KC_C
+#define CM_V    KC_V
+#define CM_B    KC_B
+#define CM_K    KC_N
+#define CM_M    KC_M
+#define CM_COMM KC_COMM
+#define CM_DOT  KC_DOT
+#define CM_SLSH KC_SLSH
+
+// Make it easy to support these in macros
+#define KC_CM_Q    CM_Q    
+#define KC_CM_W    CM_W    
+#define KC_CM_F    CM_F    
+#define KC_CM_P    CM_P    
+#define KC_CM_G    CM_G    
+#define KC_CM_J    CM_J    
+#define KC_CM_L    CM_L    
+#define KC_CM_U    CM_U    
+#define KC_CM_Y    CM_Y    
+#define KC_CM_SCLN CM_SCLN 
+
+#define KC_CM_A    CM_A    
+#define KC_CM_R    CM_R    
+#define KC_CM_S    CM_S    
+#define KC_CM_T    CM_T    
+#define KC_CM_D    CM_D    
+#define KC_CM_H    CM_H    
+#define KC_CM_N    CM_N    
+#define KC_CM_E    CM_E    
+#define KC_CM_I    CM_I    
+#define KC_CM_O    CM_O    
+
+#define KC_CM_Z    CM_Z    
+#define KC_CM_X    CM_X    
+#define KC_CM_C    CM_C    
+#define KC_CM_V    CM_V    
+#define KC_CM_B    CM_B    
+#define KC_CM_K    CM_K    
+#define KC_CM_M    CM_M    
+#define KC_CM_COMM CM_COMM 
+#define KC_CM_DOT  CM_DOT  
+#define KC_CM_SLSH CM_SLSH 
+
+#define M(kc) kc | 0x3000
+
+#define MACRODOWN(...) (record->event.pressed ? MACRO(__VA_ARGS__) : MACRO_NONE)
+
+#endif
diff --git a/keyboard/quark/extended_keymaps/extended_keymap_jack.c b/keyboard/quark/extended_keymaps/extended_keymap_jack.c
new file mode 100644
index 0000000000..416ae83450
--- /dev/null
+++ b/keyboard/quark/extended_keymaps/extended_keymap_jack.c
@@ -0,0 +1,49 @@
+#include "extended_keymap_common.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = { /* Jack soft-coded colemak */
+  {KC_TAB,  CM_Q,    CM_W,    CM_F,    CM_P,    CM_G,    CM_J,    CM_L,    CM_U,    CM_Y,    CM_SCLN, KC_BSPC},
+  {KC_ESC,  CM_A,    CM_R,    CM_S,    CM_T,    CM_D,    CM_H,    CM_N,    CM_E,    CM_I,    CM_O,     KC_QUOT},
+  {KC_LSFT, CM_Z,    CM_X,    CM_C,    CM_V,    CM_B,    CM_K,    CM_M,    CM_COMM, CM_DOT,  CM_SLSH, KC_ENT},
+  {M(0), KC_LCTL, KC_LALT, KC_LGUI, FUNC(2),    KC_SPC,   KC_NO,    FUNC(1),   KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT}
+},
+[1] = { /* Jack hard-coded colemak */
+  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,     KC_QUOT},
+  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT},
+  {KC_FN3, KC_LCTL, KC_LALT, KC_LGUI, FUNC(2),    KC_SPC,   KC_NO,    FUNC(1),   KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT}
+},
+[2] = { /* Jack RAISE */
+  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
+  {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
+  {KC_TRNS, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20, KC_TRNS},
+  {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,   KC_NO,  FUNC(1),   KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+},
+[3] = { /* Jack LOWER */
+  {S(KC_GRV),  S(KC_1),    S(KC_2),    S(KC_3),    S(KC_4),    S(KC_5),    S(KC_6),    S(KC_7),    S(KC_8),    S(KC_9),    S(KC_0), KC_BSPC},
+  {KC_TRNS, FUNC(3), FUNC(4), LSFT(RSFT(KC_PAUSE)), KC_TRNS, KC_TRNS, KC_TRNS, S(KC_MINS), S(KC_EQL),  S(KC_LBRC), S(KC_RBRC), S(KC_BSLS)},
+  {KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS},
+  {KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, FUNC(2),   KC_TRNS,   KC_NO,   KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+}
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
+    [2] = ACTION_LAYER_MOMENTARY(3),  // to Fn overlay
+
+    [3] = ACTION_DEFAULT_LAYER_SET(0),
+    [4] = ACTION_DEFAULT_LAYER_SET(1),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) 
+{
+  // MACRODOWN only works in this function
+    switch(id) {
+      case 0:
+        return MACRODOWN(T(CM_T), END);
+      break;
+    } 
+    return MACRO_NONE;
+};
diff --git a/keyboard/quark/keymap_common.c b/keyboard/quark/keymap_common.c
new file mode 100644
index 0000000000..fdb1769e1c
--- /dev/null
+++ b/keyboard/quark/keymap_common.c
@@ -0,0 +1,30 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/keyboard/quark/keymap_common.h b/keyboard/quark/keymap_common.h
new file mode 100644
index 0000000000..c74c7e9a28
--- /dev/null
+++ b/keyboard/quark/keymap_common.h
@@ -0,0 +1,86 @@
+/*
+Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+// MIT Layout
+/*
+ * ,-----------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |           |     |     |     |     |     |
+ * `-----------------------------------------------------------------------'
+ */
+#define KEYMAP( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35,      K37, K38, K39, K3A, K3B  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_NO,    KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
+}
+
+// Grid Layout
+/*
+ * ,-----------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------|
+ * |     |     |     |     |     |     |     |     |     |     |     |     |
+ * `-----------------------------------------------------------------------'
+ */
+#define KEYMAP_GRID( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B  \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B }  \
+}
+
+
+#endif
diff --git a/keyboard/quark/led.c b/keyboard/quark/led.c
new file mode 100644
index 0000000000..1f36434883
--- /dev/null
+++ b/keyboard/quark/led.c
@@ -0,0 +1,38 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    // Using PE6 Caps Lock LED
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    {
+        // Output high.
+        DDRE |= (1<<6);
+        PORTE |= (1<<6);
+    }
+    else
+    {
+        // Output low.
+        DDRE &= ~(1<<6);
+        PORTE &= ~(1<<6);
+    }
+}
diff --git a/keyboard/quark/matrix.c b/keyboard/quark/matrix.c
new file mode 100644
index 0000000000..e3926caece
--- /dev/null
+++ b/keyboard/quark/matrix.c
@@ -0,0 +1,219 @@
+/*
+Copyright 2012 Jun Wako 
+Generated by planckkeyboard.com (2014 Jack Humbert)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "backlight.h" // TODO fix this dependency 
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+
+    // TODO fix this dependency 
+    backlight_init_ports();
+    
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+//
+// Planck PCB Rev 1 Pin Assignments
+//
+// Column: 0,  1,  2,  3,  4,  5,  6,  7,  8,  9,  10, 11
+// Pin:    F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7
+//
+
+static void init_cols(void)
+{
+    DDRB &= ~(1<<4 | 1<<0);
+    PORTB |= (1<<4 | 1<<0);
+    DDRC &= ~(1<<7);
+    PORTC |= (1<<7);
+    DDRD &= ~(1<<7 | 1<<6 | 1<<4);
+    PORTD |= (1<<7 | 1<<6 | 1<<4);
+    DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    
+}
+
+static matrix_row_t read_cols(void)
+{
+  return (PINF&(1<<1) ? 0 : (1<<0)) |
+         (PINF&(1<<0) ? 0 : (1<<1)) |
+         (PINB&(1<<0) ? 0 : (1<<2)) |
+         (PINC&(1<<7) ? 0 : (1<<3)) |
+         (PINF&(1<<4) ? 0 : (1<<4)) |
+         (PINF&(1<<5) ? 0 : (1<<5)) |
+         (PINF&(1<<6) ? 0 : (1<<6)) |
+         (PINF&(1<<7) ? 0 : (1<<7)) |
+         (PIND&(1<<4) ? 0 : (1<<8)) |
+         (PIND&(1<<6) ? 0 : (1<<9)) |
+         (PINB&(1<<4) ? 0 : (1<<10)) |
+         (PIND&(1<<7) ? 0 : (1<<11));
+         
+}
+
+static void unselect_rows(void)
+{
+    DDRB &= ~(1<<5 | 1<<6);
+    PORTB |= (1<<5 | 1<<6);
+    DDRD &= ~(1<<0 | 1<<5);
+    PORTD |= (1<<0 | 1<<5);
+    
+}
+
+//
+// Planck PCB Rev 1 Pin Assignments
+//
+// Row: 0,  1,  2,  3
+// Pin: D0, D5, B5, B6
+//
+
+static void select_row(uint8_t row)
+{
+    switch (row) {
+        case 0:
+            DDRD  |= (1<<0);
+            PORTD &= ~(1<<0);
+            break;
+        case 1:
+            DDRD  |= (1<<5);
+            PORTD &= ~(1<<5);
+            break;
+        case 2:
+            DDRB  |= (1<<5);
+            PORTB &= ~(1<<5);
+            break;
+        case 3:
+            DDRB  |= (1<<6);
+            PORTB &= ~(1<<6);
+            break;
+        
+    }
+}
\ No newline at end of file
diff --git a/keyboard/quark/matrix_center.c b/keyboard/quark/matrix_center.c
new file mode 100644
index 0000000000..8e34130d6f
--- /dev/null
+++ b/keyboard/quark/matrix_center.c
@@ -0,0 +1,202 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "action_layer.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE	10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+/* Column pin configuration
+ * col: 0  1  2  3  4  5  6  7  8  9  10 11
+ * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
+ */
+
+static void init_cols(void)
+{
+    DDRF  &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |=  (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    DDRD  &= ~(1<<0);
+    PORTD |=  (1<<0);
+    DDRB  &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+    PORTB |=  (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
+}
+
+static matrix_row_t read_cols(void)
+{
+    return (PINB&(1<<0) ? 0 : (1<< 0)) |
+           (PINB&(1<<1) ? 0 : (1<< 1)) |
+           (PINB&(1<<2) ? 0 : (1<< 2)) |
+           (PINB&(1<<3) ? 0 : (1<< 3)) |
+           (PINB&(1<<7) ? 0 : (1<< 4)) |
+           (PIND&(1<<0) ? 0 : (1<< 5)) |
+           (PINF&(1<<7) ? 0 : (1<< 6)) |
+           (PINF&(1<<6) ? 0 : (1<< 7)) |
+           (PINF&(1<<5) ? 0 : (1<< 8)) |
+           (PINF&(1<<4) ? 0 : (1<< 9)) |
+           (PINF&(1<<1) ? 0 : (1<<10)) |
+           (PINF&(1<<0) ? 0 : (1<<11));
+}
+
+/* Row pin configuration
+ * row: 0  1  2  3
+ * pin: B0 B1 B2 B3
+ */
+static void unselect_rows(void)
+{
+    // Hi-Z(DDR:0, PORT:0) to unselect
+    DDRB  &= ~0b01110000;
+    PORTB &= ~0b01110000;
+    DDRD  &= ~0b10000000;
+    PORTD &= ~0b10000000;
+}
+
+static void select_row(uint8_t row)
+{
+    switch (row) {
+        case 0:
+            DDRB  |= (1<<6);
+            PORTB &= ~(1<<6);
+            break;
+        case 1:
+            DDRB  |= (1<<5);
+            PORTB &= ~(1<<5);
+            break;
+        case 2:
+            DDRB  |= (1<<4);
+            PORTB &= ~(1<<4);
+            break;
+        case 3:
+            DDRD  |= (1<<7);
+            PORTD &= ~(1<<7);
+            break;
+    }
+}
diff --git a/keyboard/quark/matrix_handwire.c b/keyboard/quark/matrix_handwire.c
new file mode 100644
index 0000000000..2f2dbdb108
--- /dev/null
+++ b/keyboard/quark/matrix_handwire.c
@@ -0,0 +1,193 @@
+/*
+Copyright 2012 Jun Wako 
+Generated by planckkeyboard.com (2014 Jack Humbert)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+#   define DEBOUNCE 10
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+}
+
+uint8_t matrix_scan(void)
+{
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i] != cols) {
+            matrix_debouncing[i] = cols;
+            if (debouncing) {
+                debug("bounce!: "); debug_hex(debouncing); debug("\n");
+            }
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+        }
+    }
+
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void init_cols(void)
+{
+    DDRB &= ~(1<<6 | 1<<5 | 1<<4);
+    PORTB |= (1<<6 | 1<<5 | 1<<4);
+    DDRD &= ~(1<<7 | 1<<6 | 1<<4);
+    PORTD |= (1<<7 | 1<<6 | 1<<4);
+    DDRF &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    PORTF |= (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
+    
+}
+
+static matrix_row_t read_cols(void)
+{
+  return (PIND&(1<<4) ? 0 : (1<<0)) |
+         (PIND&(1<<6) ? 0 : (1<<1)) |
+         (PIND&(1<<7) ? 0 : (1<<2)) |
+         (PINB&(1<<4) ? 0 : (1<<3)) |
+         (PINB&(1<<5) ? 0 : (1<<4)) |
+         (PINB&(1<<6) ? 0 : (1<<5)) |
+         (PINF&(1<<7) ? 0 : (1<<6)) |
+         (PINF&(1<<6) ? 0 : (1<<7)) |
+         (PINF&(1<<5) ? 0 : (1<<8)) |
+         (PINF&(1<<4) ? 0 : (1<<9)) |
+         (PINF&(1<<1) ? 0 : (1<<10)) |
+         (PINF&(1<<0) ? 0 : (1<<11));
+         
+}
+
+static void unselect_rows(void)
+{
+    DDRB &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3);
+    PORTB |= (1<<0 | 1<<1 | 1<<2 | 1<<3);
+    
+}
+
+static void select_row(uint8_t row)
+{
+    switch (row) {
+        case 0:
+            DDRB  |= (1<<0);
+            PORTB &= ~(1<<0);
+            break;
+        case 1:
+            DDRB  |= (1<<1);
+            PORTB &= ~(1<<1);
+            break;
+        case 2:
+            DDRB  |= (1<<2);
+            PORTB &= ~(1<<2);
+            break;
+        case 3:
+            DDRB  |= (1<<3);
+            PORTB &= ~(1<<3);
+            break;
+        
+    }
+}