summaryrefslogtreecommitdiff
path: root/keyboard
diff options
context:
space:
mode:
authorJack Humbert <jack.humb@gmail.com>2015-03-16 12:01:35 -0400
committerJack Humbert <jack.humb@gmail.com>2015-03-16 12:01:35 -0400
commit9307a0a3e415d33d0858283f67fcba4c59a042ff (patch)
tree45252e53439dde1122945646f4fa340cf0a8923e /keyboard
parentbe86aefdbda560d6810f9594169fee4385c1422d (diff)
parentc35c4283b9c2c65d62fe8dc5e4b7ca49a8f5af33 (diff)
Merge pull request #6 from tmk/master
pulling from tmk
Diffstat (limited to 'keyboard')
-rw-r--r--keyboard/ghost_squid/Makefile.lufa117
-rw-r--r--keyboard/ghost_squid/README.md20
-rw-r--r--keyboard/ghost_squid/config.h43
-rw-r--r--keyboard/ghost_squid/keymap.c102
-rw-r--r--keyboard/ghost_squid/keymap_ansi.h23
-rw-r--r--keyboard/ghost_squid/led.c (renamed from keyboard/hhkb_rn42/led.c)45
-rw-r--r--keyboard/ghost_squid/matrix.c237
-rw-r--r--keyboard/hhkb/Makefile.rn42 (renamed from keyboard/hhkb_rn42/Makefile)22
-rw-r--r--keyboard/hhkb/README.md17
-rw-r--r--keyboard/hhkb/config_rn42.h (renamed from keyboard/hhkb_rn42/config.h)0
-rw-r--r--keyboard/hhkb/hhkb_avr.h28
-rw-r--r--keyboard/hhkb/keymap_hasu.c34
-rw-r--r--keyboard/hhkb/matrix.c27
-rw-r--r--keyboard/hhkb/not_supported/Makefile.iwrap (renamed from keyboard/hhkb/Makefile.iwrap)0
-rw-r--r--keyboard/hhkb/not_supported/Makefile.vusb (renamed from keyboard/hhkb/Makefile.vusb)0
-rw-r--r--keyboard/hhkb/not_supported/config_iwrap.h (renamed from keyboard/hhkb/config_iwrap.h)0
-rw-r--r--keyboard/hhkb/not_supported/config_vusb.h (renamed from keyboard/hhkb/config_vusb.h)0
-rw-r--r--keyboard/hhkb/not_supported/iwrap.txt (renamed from keyboard/hhkb/iwrap.txt)0
-rw-r--r--keyboard/hhkb/not_supported/usbconfig.h (renamed from keyboard/hhkb/usbconfig.h)0
-rw-r--r--keyboard/hhkb/rn42.mk (renamed from keyboard/hhkb_rn42/rn42.mk)0
-rw-r--r--keyboard/hhkb/rn42/MEMO.txt255
-rw-r--r--keyboard/hhkb/rn42/PowerSave.txt (renamed from keyboard/hhkb_rn42/PowerSave.txt)64
-rw-r--r--keyboard/hhkb/rn42/RN42.txt408
-rw-r--r--keyboard/hhkb/rn42/battery.c (renamed from keyboard/hhkb_rn42/rn42/battery.c)20
-rw-r--r--keyboard/hhkb/rn42/battery.h (renamed from keyboard/hhkb_rn42/rn42/battery.h)0
-rw-r--r--keyboard/hhkb/rn42/main.c (renamed from keyboard/hhkb_rn42/rn42/main.c)19
-rw-r--r--keyboard/hhkb/rn42/rn42.c (renamed from keyboard/hhkb_rn42/rn42/rn42.c)31
-rw-r--r--keyboard/hhkb/rn42/rn42.h (renamed from keyboard/hhkb_rn42/rn42/rn42.h)3
-rw-r--r--keyboard/hhkb/rn42/rn42_task.c478
-rw-r--r--keyboard/hhkb/rn42/rn42_task.h (renamed from keyboard/hhkb_rn42/rn42/rn42_task.h)0
-rw-r--r--keyboard/hhkb/rn42/suart.S (renamed from keyboard/hhkb_rn42/rn42/suart.S)0
-rw-r--r--keyboard/hhkb/rn42/suart.h (renamed from keyboard/hhkb_rn42/rn42/suart.h)0
-rw-r--r--keyboard/hhkb_rn42/MEMO.txt523
-rw-r--r--keyboard/hhkb_rn42/hhkb_avr.h164
-rw-r--r--keyboard/hhkb_rn42/keymap_common.h84
-rw-r--r--keyboard/hhkb_rn42/keymap_hasu.c282
-rw-r--r--keyboard/hhkb_rn42/keymap_jp.c50
-rw-r--r--keyboard/hhkb_rn42/matrix.c191
-rw-r--r--keyboard/hhkb_rn42/rn42/rn42_task.c294
-rw-r--r--keyboard/infinity/Makefile7
-rw-r--r--keyboard/infinity/config.h4
-rw-r--r--keyboard/infinity/keymap.c3
-rw-r--r--keyboard/infinity/keymap_common.h28
-rw-r--r--keyboard/nerd/Makefile (renamed from keyboard/hhkb/Makefile.nodebug)53
-rw-r--r--keyboard/nerd/README.md52
-rw-r--r--keyboard/nerd/backlight.c81
-rw-r--r--keyboard/nerd/backlight.h40
-rw-r--r--keyboard/nerd/config.h49
-rw-r--r--keyboard/nerd/keymap_60_ansi150.c30
-rw-r--r--keyboard/nerd/keymap_80_ansi150.c33
-rw-r--r--keyboard/nerd/keymap_common.c (renamed from keyboard/hhkb_rn42/keymap_common.c)6
-rw-r--r--keyboard/nerd/keymap_common.h89
-rw-r--r--keyboard/nerd/matrix.c221
53 files changed, 2537 insertions, 1740 deletions
diff --git a/keyboard/ghost_squid/Makefile.lufa b/keyboard/ghost_squid/Makefile.lufa
new file mode 100644
index 0000000000..61893893a4
--- /dev/null
+++ b/keyboard/ghost_squid/Makefile.lufa
@@ -0,0 +1,117 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = ghostsquid_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+#CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/ghost_squid/README.md b/keyboard/ghost_squid/README.md
new file mode 100644
index 0000000000..dda67e6ba1
--- /dev/null
+++ b/keyboard/ghost_squid/README.md
@@ -0,0 +1,20 @@
+The Ghost Squid controller
+==========================
+Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany.
+
+*Note that this is not the official firmware*
+
+Build
+-----
+Move to this directory then just run `make` like:
+
+ $ make -f Makefile.lufa
+
+At the moment only the LUFA stack is supported.
+
+
+Bootloader
+---------
+To enter bootloader by hardware use a magnet above the controller before connecting the usb cable.
+
+It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though.
diff --git a/keyboard/ghost_squid/config.h b/keyboard/ghost_squid/config.h
new file mode 100644
index 0000000000..54f03143c1
--- /dev/null
+++ b/keyboard/ghost_squid/config.h
@@ -0,0 +1,43 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED // 0x2516 (original CM XT value)
+#define PRODUCT_ID 0x001A
+#define DEVICE_VER 0x0000
+#define MANUFACTURER Cooler Master
+#define PRODUCT Cooler Master QuickFire XT
+
+/* message strings */
+#define DESCRIPTION t.m.k. keyboard firmware for Cooler Master QuickFire XT
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE 5
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
diff --git a/keyboard/ghost_squid/keymap.c b/keyboard/ghost_squid/keymap.c
new file mode 100644
index 0000000000..e9ad9efe1a
--- /dev/null
+++ b/keyboard/ghost_squid/keymap.c
@@ -0,0 +1,102 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "debug.h"
+#include "keymap.h"
+
+/*
+ Matrix col/row mapping
+
+ ,----. ,-------------------. ,-------------------. ,-------------------. ,--------------.
+ |06/6| |07/4|08/4|08/2|08/6| |15/5|11/6|12/2|12/4| |14/4|14/5|14/6|14/0| |13/5|13/7|15/7|
+ `----' `-------------------' `-------------------' `-------------------' `--------------'
+ ,-------------------------------------------------------------------------. ,--------------. ,-------------------.
+ |06/4|06/5|07/5|08/5|09/5|09/4|10/4|10/5|11/5|12/5|05/5|05/4|11/4| 14/2| |17/4|02/4|04/4| |16/1|17/1|04/1|04/0|
+ |-------------------------------------------------------------------------| |--------------| |-------------------|
+ |06/2 |06/7|07/7|08/7|09/7|09/2|10/2|10/7|11/7|12/7|05/7|05/2|11/2| 14/3| |16/4|02/5|04/5| |16/7|17/7|04/7| |
+ |-------------------------------------------------------------------------| '--------------' |-------------- 02/7|
+ |02/7 |06/3|07/3|08/3|09/3|09/6|10/6|10/3|11/3|12/3|05/3|05/6| 14/1| |16/2|17/2|04/2| |
+ |-------------------------------------------------------------------------| ,----. |-------------------|
+ |01/2 |06/1|07/1|08/1|09/1|09/0|10/0|10/1|11/1|12/1|05/0| 01/3| |02/6| |16/3|17/3|04/3| |
+ |-------------------------------------------------------------------------| ,--------------. |-------------- 02/3|
+ |15/4|03/2|13/6| 16/6 |13/0|0/3|12/0|15/1| |02/0|16/0|17/0| | 17/6 |04/6| |
+ `-------------------------------------------------------------------------' `--------------' `-------------------'
+*/
+
+#define KEYMAP( \
+ KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
+ KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, KQ1, KR1, KE1, KE0, \
+ KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, KQ7, KR7, KE7, KC7, \
+ KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, KQ2, KR2, KE2, \
+ KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, KQ3, KR3, KE3, KC3, \
+ KP4, KD2, KN6, KQ6, KN0, KA3, KM0, KP1, KC0, KQ0, KR0, KR6, KE6 \
+) { \
+/* 0 1 2 3 4 5 6 7 */ \
+/* A 0 */ {KC_NO, KC_NO, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_NO },\
+/* B 1 */ {KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_NO, KC_NO, KC_NO, KC_NO },\
+/* C 2 */ {KC_##KC0, KC_NO, KC_NO, KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7},\
+/* D 3 */ {KC_NO, KC_NO, KC_##KD2, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO },\
+/* E 4 */ {KC_##KE0, KC_##KE1, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_##KE7},\
+/* F 5 */ {KC_##KF0, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_##KF7},\
+/* G 6 */ {KC_NO, KC_##KG1, KC_##KG2, KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7},\
+/* H 7 */ {KC_NO, KC_##KH1, KC_##KH2, KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7},\
+/* I 8 */ {KC_NO, KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7},\
+/* J 9 */ {KC_##KJ0, KC_##KJ1, KC_##KJ2, KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7},\
+/* K 10 */ {KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7},\
+/* L 11 */ {KC_NO, KC_##KL1, KC_##KL2, KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7},\
+/* M 12 */ {KC_##KM0, KC_##KM1, KC_##KM2, KC_##KM3, KC_##KM4, KC_##KM5, KC_NO, KC_##KM7},\
+/* N 13 */ {KC_##KN0, KC_NO, KC_NO, KC_NO, KC_NO, KC_##KN5, KC_##KN6, KC_##KN7},\
+/* O 14 */ {KC_##KO0, KC_##KO1, KC_##KO2, KC_##KO3, KC_##KO4, KC_##KO5, KC_##KO6, KC_NO },\
+/* P 15 */ {KC_NO, KC_##KP1, KC_NO, KC_NO, KC_##KP4, KC_##KP5, KC_NO, KC_##KP7},\
+/* Q 16 */ {KC_##KQ0, KC_##KQ1, KC_##KQ2, KC_##KQ3, KC_##KQ4, KC_NO, KC_##KQ6, KC_##KQ7},\
+/* R 17 */ {KC_##KR0, KC_##KR1, KC_##KR2, KC_##KR3, KC_##KR4, KC_NO, KC_##KR6, KC_##KR7} \
+}
+
+#include "keymap_ansi.h"
+
+#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0]))
+#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0]))
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ if (layer < KEYMAPS_SIZE) {
+ return pgm_read_byte(&keymaps[(layer)][(key.col)][(key.row)]);
+ } else {
+ return pgm_read_byte(&keymaps[0][(key.col)][(key.row)]);
+ }
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ action_t action;
+ if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) {
+ action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
+ } else {
+ action.code = ACTION_NO;
+ }
+ return action;
+}
diff --git a/keyboard/ghost_squid/keymap_ansi.h b/keyboard/ghost_squid/keymap_ansi.h
new file mode 100644
index 0000000000..ed1088baa9
--- /dev/null
+++ b/keyboard/ghost_squid/keymap_ansi.h
@@ -0,0 +1,23 @@
+
+static const uint8_t PROGMEM keymaps[][MATRIX_COLS][MATRIX_ROWS] = {
+ /* Layer 0: Standard ANSI layer */
+ KEYMAP(\
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, \
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, \
+ LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, PENT, \
+ LCTL,LGUI,LALT, SPC, RALT,RGUI, FN0,RCTL, LEFT,DOWN,RGHT, P0, PDOT), \
+ /* Layer 1: Function layer */
+ KEYMAP(\
+ CALC,MYCM,WSCH,WHOM,MAIL,VOLD,VOLU,MSEL,MSTP,MPLY,MPRV,MNXT,TRNS, WAKE, PWR,SLEP, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS)
+};
+
+static const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1)
+};
diff --git a/keyboard/hhkb_rn42/led.c b/keyboard/ghost_squid/led.c
index 8a08fe27fc..da5dbd7ae2 100644
--- a/keyboard/hhkb_rn42/led.c
+++ b/keyboard/ghost_squid/led.c
@@ -1,5 +1,5 @@
/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -19,15 +19,42 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "stdint.h"
#include "led.h"
-
-/* HHKB has no LEDs */
+/* LED pin configuration
+ *
+ * Scroll Lock PB7
+ * CAPS PC6
+ * NUMLOCK PC5
+ *
+ */
void led_set(uint8_t usb_led)
{
- if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
- DDRD |= (1<<6);
- PORTD |= (1<<6);
- } else {
- DDRD |= (1<<6);
- PORTD &= ~(1<<6);
+ DDRB |= (1<<7);
+ DDRC |= (1<<5) | (1<<6);
+
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ {
+ PORTC &= ~(1<<6);
+ }
+ else
+ {
+ PORTC |= (1<<6);
+ }
+
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ {
+ PORTC &= ~(1<<5);
+ }
+ else
+ {
+ PORTC |= (1<<5);
+ }
+
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ {
+ PORTB &= ~(1<<7);
+ }
+ else
+ {
+ PORTB |= (1<<7);
}
}
diff --git a/keyboard/ghost_squid/matrix.c b/keyboard/ghost_squid/matrix.c
new file mode 100644
index 0000000000..d6a82ef759
--- /dev/null
+++ b/keyboard/ghost_squid/matrix.c
@@ -0,0 +1,237 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(void);
+static void init_rows(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+inline uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ unselect_cols();
+ init_rows();
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ uint8_t rows = read_rows();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = rows & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ debouncing = DEBOUNCE;
+ }
+ }
+ unselect_cols();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop32(matrix[i]);
+ }
+ return count;
+}
+
+/* Row pin configuration
+ *
+ * row: 0 1 2 3 4 5 6 7
+ * pin: PB1 PC2 PB6 PB4 PB3 PB5 PB0 PB2
+ *
+ */
+static void init_rows(void)
+{
+ DDRC &= ~0b00000100;
+ DDRB &= ~0b01111111;
+ PORTC |= 0b00000100;
+ PORTB |= 0b01111111;
+}
+
+static uint8_t read_rows(void)
+{
+ return (PINB&(1<<1) ? 0 : (1<<0)) |
+ (PINC&(1<<2) ? 0 : (1<<1)) |
+ (PINB&(1<<6) ? 0 : (1<<2)) |
+ (PINB&(1<<4) ? 0 : (1<<3)) |
+ (PINB&(1<<3) ? 0 : (1<<4)) |
+ (PINB&(1<<5) ? 0 : (1<<5)) |
+ (PINB&(1<<0) ? 0 : (1<<6)) |
+ (PINB&(1<<2) ? 0 : (1<<7));
+}
+
+/* These columns uses two 74HC42 4 to 10 bit demultiplexers (low active).
+ *
+ * COL PD6 PD5 PD4 PD3 PD2 PD1
+ * 10 1 1 0 0 0 0
+ * 15 1 1 0 0 0 1
+ * 8 1 1 0 0 1 0
+ * 14 1 1 0 1 0 0
+ * 6 1 1 0 1 0 1
+ * 13 1 1 0 1 1 0
+ * 12 1 1 1 0 0 0
+ * 9 1 1 1 0 1 0
+ * 11 1 1 1 1 0 0
+ * 7 1 1 1 1 1 0
+ *
+ * COL PD1 PD2 PD3 PD4 PD5 PD6
+ * 3 1 1 0 0 0 1
+ * 4 1 1 0 0 1 0
+ * 17 1 1 0 1 0 0
+ * 16 1 1 0 1 1 0
+ * 0 1 1 1 0 0 1
+ * 5 1 1 1 0 1 0
+ * 2 1 1 1 1 0 0
+ * 1 1 1 1 1 1 0
+ */
+static void unselect_cols(void)
+{
+ DDRD |= 0b01111111;
+ PORTD &= ~0b01111111;
+}
+
+static void select_col(uint8_t col)
+{
+ switch (col) {
+ case 0:
+ PORTD |= (1<<6) | (1<<3) | (1<<2) | (1<<1);
+ break;
+ case 1:
+ PORTD |= (1<<5) | (1<<4) | (1<<3) | (1<<2) | (1<<1);
+ break;
+ case 2:
+ PORTD |= (1<<4) | (1<<3) | (1<<2) | (1<<1);
+ break;
+ case 3:
+ PORTD |= (1<<6) | (1<<2) | (1<<1);
+ break;
+ case 4:
+ PORTD |= (1<<5) | (1<<2) | (1<<1);
+ break;
+ case 5:
+ PORTD |= (1<<5) | (1<<3) | (1<<2) | (1<<1);
+ break;
+ case 6:
+ PORTD |= (1<<6) | (1<<5) | (1<<3) | (1<<1);
+ break;
+ case 7:
+ PORTD |= (1<<6) | (1<<5) | (1<<4) | (1<<3) | (1<<2);
+ break;
+ case 8:
+ PORTD |= (1<<6) | (1<<5) | (1<<2);
+ break;
+ case 9:
+ PORTD |= (1<<6) | (1<<5) | (1<<4) | (1<<2);
+ break;
+ case 10:
+ PORTD |= (1<<6) | (1<<5);
+ break;
+ case 11:
+ PORTD |= (1<<6) | (1<<5) | (1<<4) | (1<<3);
+ break;
+ case 12:
+ PORTD |= (1<<6) | (1<<5) | (1<<4);
+ break;
+ case 13:
+ PORTD |= (1<<6) | (1<<5) | (1<<3) | (1<<2);
+ break;
+ case 14:
+ PORTD |= (1<<6) | (1<<5) | (1<<3);
+ break;
+ case 15:
+ PORTD |= (1<<6) | (1<<5) | (1<<1);
+ break;
+ case 16:
+ PORTD |= (1<<5) | (1<<4) | (1<<2) | (1<<1);
+ break;
+ case 17:
+ PORTD |= (1<<4) | (1<<2) | (1<<1);
+ break;
+ }
+}
diff --git a/keyboard/hhkb_rn42/Makefile b/keyboard/hhkb/Makefile.rn42
index 3d9a602a58..b1eacd070f 100644
--- a/keyboard/hhkb_rn42/Makefile
+++ b/keyboard/hhkb/Makefile.rn42
@@ -39,7 +39,7 @@
#----------------------------------------------------------------------------
# Target file name (without extension).
-TARGET = hhkb_lufa
+TARGET = hhkb_rn42
# Directory common source filess exist
TOP_DIR = ../..
@@ -53,13 +53,10 @@ SRC += keymap_common.c \
matrix.c \
led.c
-CONFIG_H = config.h
+CONFIG_H = config_rn42.h
# MCU name
-# PJRC Teensy++ 2.0
-#MCU = at90usb1286
-# TMK Alt Controller or PJRC Teensy 2.0
MCU = atmega32u4
# Processor frequency.
@@ -121,11 +118,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
#HHKB_JP = yes # HHKB JP support
-ifdef HHKB_JP
- OPT_DEFS += -DHHKB_JP
-endif
-
-
#
# Keymap file
#
@@ -134,12 +126,17 @@ ifdef KEYMAP
else
ifdef HHKB_JP
SRC := keymap_jp.c $(SRC)
- else
- SRC := keymap_hasu.c $(SRC)
+ else
+ SRC := keymap_hhkb.c $(SRC)
endif
endif
+ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
+ OPT_DEFS += -DHHKB_JP
+endif
+
+
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
@@ -154,4 +151,5 @@ debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
debug-on: all
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
+debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
debug-off: all
diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md
index f9fd165076..fcd72e1941 100644
--- a/keyboard/hhkb/README.md
+++ b/keyboard/hhkb/README.md
@@ -10,11 +10,17 @@ See [this thread][AltController] in geekhack.org.
[AltController]: http://geekhack.org/index.php?topic=12047.0
+## Update
+* Bluetooth module RN-42 is supported.(2015/01)
+* V-USB and iWRAP are no longer supported now, but still it'll works with a little fix. See not_supported directory.(2015/01)
+
+
##Features
* Customizable keymap
* More keymap layers(more Fn keys)
* Mouse keys
* USB NKRO
+* Bluetooth(RN-42)
See README of [tmk_keyboard] for more.
@@ -50,8 +56,9 @@ If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER
### Build
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like:
- $ make KEYMAP=[hasu|hhkb|spacefn|<name>]
- $ make -f Makefile.jp KEYMAP=[jp|<name>] # for HHKB JP
+ $ make -f Makefile.<jp|pjrc|rn42> KEYMAP=(hasu|hhkb|spacefn|<name>)
+
+You can omit `-f` option when you use `Makefile`. `Makefile` is used for **Pro2 and Pro**, `Makefile.jp` fits for **JP** model and `Makefile.rn42` supports Bluetooth module **RN-42**. `Makefile.pjrc` uses **PJRC** as output protocol instead of **LUFA**.
### Program
@@ -59,13 +66,11 @@ First, push reset button on board to start bootloader.
This command programs the controller with [dfu-programmer] if the tool is installed and configured properly.
- $ make dfu
- $ make -f Makefile.jp dfu # for HHKB JP
+ $ make -f Makefile.<variant> KEYMAP=<name> dfu
Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available.
- $ make flip
- $ make -f Makefile.jp flip # for HHKB JP
+ $ make -f Makefile.<variant> KEYMAP=<name> flip
Use [Teensy Loader] if your controller is Teensy/Teensy++.
diff --git a/keyboard/hhkb_rn42/config.h b/keyboard/hhkb/config_rn42.h
index 21e73f1c53..21e73f1c53 100644
--- a/keyboard/hhkb_rn42/config.h
+++ b/keyboard/hhkb/config_rn42.h
diff --git a/keyboard/hhkb/hhkb_avr.h b/keyboard/hhkb/hhkb_avr.h
index b7bd507b5d..7ea6322c73 100644
--- a/keyboard/hhkb/hhkb_avr.h
+++ b/keyboard/hhkb/hhkb_avr.h
@@ -41,17 +41,32 @@ static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); }
static inline bool KEY_STATE(void) { return (PIND & (1<<7)); }
static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); }
static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
+#ifdef HHKB_POWER_SAVING
+static inline void KEY_POWER_ON(void) {
+ DDRB = 0xFF; PORTB = 0x40; // change pins output
+ DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on
+ /* Without this wait you will miss or get false key events. */
+ _delay_ms(5); // wait for powering up
+}
+static inline void KEY_POWER_OFF(void) {
+ /* input with pull-up consumes less than without it when pin is open. */
+ DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up
+ DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off
+}
+static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); }
+#else
static inline void KEY_POWER_ON(void) {}
static inline void KEY_POWER_OFF(void) {}
+static inline bool KEY_POWER_STATE(void) { return true; }
+#endif
static inline void KEY_INIT(void)
{
+ /* row,col,prev: output */
DDRB = 0xFF;
- PORTB = 0x00;
+ PORTB = 0x40; // unable
+ /* key: input with pull-up */
DDRD &= ~0x80;
- PORTD |= 0x80;
- /* keyswitch board power on */
- DDRD |= (1<<4);
- PORTD |= (1<<4);
+ PORTD |= 0x80;
#ifdef HHKB_JP
/* row extention for HHKB JP */
DDRC |= (1<<6|1<<7);
@@ -59,6 +74,8 @@ static inline void KEY_INIT(void)
#endif
KEY_UNABLE();
KEY_PREV_OFF();
+
+ KEY_POWER_OFF();
}
static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
{
@@ -98,6 +115,7 @@ static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
+#define KEY_POWER_STATE() true
#else
diff --git a/keyboard/hhkb/keymap_hasu.c b/keyboard/hhkb/keymap_hasu.c
index 8379c84f52..433f9cb270 100644
--- a/keyboard/hhkb/keymap_hasu.c
+++ b/keyboard/hhkb/keymap_hasu.c
@@ -27,7 +27,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \
FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
- LGUI,LALT, FN4, FN5, FN5),
+ LGUI,LALT, FN4, FN5, RGUI),
/* Layer 1: HHKB mode[HHKB Fn]
* ,-----------------------------------------------------------.
@@ -47,7 +47,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \
LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \
- LGUI,LALT, SPC, RALT,RGUI),
+ LGUI,LALT, TRNS, RALT,RGUI),
/* Layer 2: Vi mode[Slash]
* ,-----------------------------------------------------------.
@@ -66,7 +66,7 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,RSFT,NO, \
+ LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,TRNS, \
LGUI,LALT, SPC, RALT,RGUI),
/* Layer 3: Mouse mode(IJKL)[Semicolon]
@@ -81,16 +81,16 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Fn |Fn |
* `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
[3] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \
- LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \
+ FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
+ LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,FN3, NO, ENT, \
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
LGUI,LALT, BTN1, TRNS,TRNS),
- /* Layer 5: Mouse mode(IJKL)[Space]
+ /* Layer 4: Mouse mode(IJKL)[Space]
* ,-----------------------------------------------------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
* |-----------------------------------------------------------|
@@ -102,13 +102,13 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* `-----------------------------------------------------------'
* |Gui |Alt | Mb1 |Fn |Fn |
* `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8
+ * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
[4] = \
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, WH_L,WH_D,MS_U,WH_U,WH_R,WBAK,WFWD,FN8, \
+ FN8, NO, NO, NO, NO, NO, NO, WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,TRNS, \
LGUI,LALT, TRNS, TRNS,TRNS),
#if 0
@@ -127,9 +127,9 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, \
+ TAB, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, NO, NO, BSPC, \
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,SLSH,RSFT,NO, \
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,SLSH,RSFT,NO, \
LGUI,LALT, BTN1, RALT,TRNS),
/* Layer4: Mouse mode(HJKL)[Space]
@@ -147,9 +147,9 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
*/
KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, WBAK,WFWD,FN8, \
+ FN8, NO, NO, NO, NO, NO, NO, WH_D,WH_U,RGHT,NO, FN9, FN10,FN8, \
LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,BTN4,BTN5,NO, RSFT,NO, \
+ LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
LGUI,LALT, TRNS, RALT,RGUI),
#endif
#if 0
@@ -201,10 +201,12 @@ const uint16_t fn_actions[] PROGMEM = {
[2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash*
[3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon*
[4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space
- [5] = ACTION_LAYER_MOMENTARY(3), // Mousekey layer
+ [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL)
[6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter
[7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift
[8] = ACTION_MACRO(ALT_TAB), // Application switching
+ [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
+ [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace
// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index b0af4baa52..fb96997944 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -27,8 +27,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "timer.h"
#include "matrix.h"
#include "hhkb_avr.h"
+#include <avr/wdt.h>
+#include "suspend.h"
+#include "lufa.h"
+// matrix power saving
+#define MATRIX_POWER_SAVE 10000
+static uint32_t matrix_last_modified = 0;
+
// matrix state buffer(1:on, 0:off)
static matrix_row_t *matrix;
static matrix_row_t *matrix_prev;
@@ -72,7 +79,8 @@ uint8_t matrix_scan(void)
matrix_prev = matrix;
matrix = tmp;
- KEY_POWER_ON();
+ // power on
+ if (!KEY_POWER_STATE()) KEY_POWER_ON();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
KEY_SELECT(row, col);
@@ -126,8 +134,16 @@ uint8_t matrix_scan(void)
// This takes 25us or more to make sure KEY_STATE returns to idle state.
_delay_us(75);
}
+ if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
+ }
+ // power off
+ if (KEY_POWER_STATE() &&
+ (USB_DeviceState == DEVICE_STATE_Suspended ||
+ USB_DeviceState == DEVICE_STATE_Unattached ) &&
+ timer_elapsed32(matrix_last_modified) > MATRIX_POWER_SAVE) {
+ KEY_POWER_OFF();
+ suspend_power_down();
}
- KEY_POWER_OFF();
return 1;
}
@@ -165,3 +181,10 @@ void matrix_print(void)
xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row)));
}
}
+
+void matrix_power_up(void) {
+ KEY_POWER_ON();
+}
+void matrix_power_down(void) {
+ KEY_POWER_OFF();
+}
diff --git a/keyboard/hhkb/Makefile.iwrap b/keyboard/hhkb/not_supported/Makefile.iwrap
index 2d9d82c481..2d9d82c481 100644
--- a/keyboard/hhkb/Makefile.iwrap
+++ b/keyboard/hhkb/not_supported/Makefile.iwrap
diff --git a/keyboard/hhkb/Makefile.vusb b/keyboard/hhkb/not_supported/Makefile.vusb
index 4343b210d9..4343b210d9 100644
--- a/keyboard/hhkb/Makefile.vusb
+++ b/keyboard/hhkb/not_supported/Makefile.vusb
diff --git a/keyboard/hhkb/config_iwrap.h b/keyboard/hhkb/not_supported/config_iwrap.h
index 747c755132..747c755132 100644
--- a/keyboard/hhkb/config_iwrap.h
+++ b/keyboard/hhkb/not_supported/config_iwrap.h
diff --git a/keyboard/hhkb/config_vusb.h b/keyboard/hhkb/not_supported/config_vusb.h
index 44f7acd6cd..44f7acd6cd 100644
--- a/keyboard/hhkb/config_vusb.h
+++ b/keyboard/hhkb/not_supported/config_vusb.h
diff --git a/keyboard/hhkb/iwrap.txt b/keyboard/hhkb/not_supported/iwrap.txt
index 20a2420a0b..20a2420a0b 100644
--- a/keyboard/hhkb/iwrap.txt
+++ b/keyboard/hhkb/not_supported/iwrap.txt
diff --git a/keyboard/hhkb/usbconfig.h b/keyboard/hhkb/not_supported/usbconfig.h
index c3aad34bef..c3aad34bef 100644
--- a/keyboard/hhkb/usbconfig.h
+++ b/keyboard/hhkb/not_supported/usbconfig.h
diff --git a/keyboard/hhkb_rn42/rn42.mk b/keyboard/hhkb/rn42.mk
index fd6f7db1a8..fd6f7db1a8 100644
--- a/keyboard/hhkb_rn42/rn42.mk
+++ b/keyboard/hhkb/rn42.mk
diff --git a/keyboard/hhkb/rn42/MEMO.txt b/keyboard/hhkb/rn42/MEMO.txt
new file mode 100644
index 0000000000..0363c2f433
--- /dev/null
+++ b/keyboard/hhkb/rn42/MEMO.txt
@@ -0,0 +1,255 @@
+Memo of deveopment
+==================
+just memo, NOT WORTH READING
+
+Bug:
+- Factory Reset PIO4 doesn't work
+ - the reason is unclear - 12/08 NOT LOOK INTO ANY MORE
+ - WORKAROUND: use serial pins(3.3V, GND, RX and TX)
+ - SF,1 and R,1 to set factory defalult
+
+
+Todo:
+- LED cover and switch knob and new Slide Switch
+- RN42 auto configuration
+ - configure the module as HID device every time powering up
+ - this'll reduce work load of assembly
+
+- move rn42 to protocol directory when it becomes reusable stack
+
+- sendchar() in lufa.c no buffer
+ - no buffering. character lost can be caused.
+- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
+
+- BT operations
+ - disconnect
+ - new connection
+ - remove connection
+
+- sendchar() in lufa.c block loop - DONE 11/29
+ - block loop when powered with AC adapter
+ - FrameNumber is not updated when adapter powered
+
+Improving:
+- ADC resolution
+ AVR120
+ AVR32138
+ - Enhancing ADC resolution by oversampling
+ AVR121 http://www.atmel.com/images/doc8003.pdf
+ - disable digital input buffer DIDR(7.8.6)
+
+Design:
+- suspend.h - DONE 11/26
+ - remove argument from suspend_power_down() for backward compatitibility
+- remove MCU dependent power saving code from core/keyboard - DONE 11/23
+ - it should be located in project matrix.c
+- HHKB matrix.c needs matrix_prev?
+ - is_modified() is obsolete now. really needs?
+- ADC: removing AREF capacitor C10
+ - seems to be better while usb powered
+ - still bad while battery powered
+ http://electronics.stackexchange.com/questions/105849/avcc-and-capacitor-using-adc
+- ADC: smaller resistors for voltage dividor
+ - 1K + 1K: not improved. - 11/27
+
+
+LUFA:
+USB connection check: state of USB deivce
+- USB_DeviceState:
+ USB_Deivce_State_t { Unattached, Powered, Default, Addressed, Configured*, Suspended* }
+ Unattached: unpluged
+ Powered: pluged with power adapter
+ Default: enumerate process bigin
+ Addressed: addressed
+ Configured: enumerated
+ Suspended: suspended
+
+- USB_IsInitialized: state of LUFA core setup
+ becomes true in USB_Init() USBController_AVR8.c
+ becomes false in USB_Disable() USBController_AVR8.c
+- USB_VBUS_GetStatus(): state of VBUS(power/connection)
+- USB_Disable() detaches, disables all interrupts, controller, PLL, regulater.
+
+- When connect to power adapter
+ - event happened: CW or CSW or C or DDC
+ - USB state: not configured
+
+- USB evnets
+ - USB connect: CSWRWRW
+ - USB connect but fail to enumeration: CWRWRWRWS
+ - USB disconnect: D
+ - Power adapter connect: CW, CSW, C
+ - Power adapter disconnect: D
+
+
+Power saving:
+- Pro2 current consumption
+ - active: 138.2mA(no device on Hub)
+ - suspended: 30.9mA(WakeUp enabled DIPSW6)
+ - suspended: 0mA->46.0mA(WakeUp disabled DIPSW6)
+- Pro current consumption
+ - active: 54.0mA
+ - suspended: 40.5mA(WakeUp enabled DIPSW6)
+ - suspended: 0.3mA(WakeUp disabled DIPSW6)
+
+- RN42 3.3V
+ - disconnected(Idle): 5mA (config mode)
+ - connected(Active):
+ SW,0000: 23-26mA
+ SW,0010: 27-29mA worse than 0000 for unknown reason
+ SW,0020: 17-19mA mouse NG
+ SW,0030: 13-16mA laggy mouse NG
+ SW,0050: 10-13mA laggy mouse NG
+
+- matrix power saving
+ - power saving while externally powered and not while unpluged
+- confirm suspend mode lufa.c: matrix_power_*, suspend_wakeup_condition
+- 8MHz clock
+- When not connected in a few minutes get into deep sleep to save battery life
+- CTS is needed for waking up from deep sleep? How deep sleep is activated?
+- firmware controlled 3.3V DC converter to switch on/off BT module
+- sleep MCU and BT module(keyboard is not used)
+- deep sleep MCU and BT module(keyboard is not used for long time)
+- deep sleep MCU and turn off BT module(keyboard is not used and not connected)
+- Battery ADC; switching, high resistance
+ - switching gnd end of divider with PF4
+ - high resistor 100K/1M?
+ capacitor 10nF
+ http://www.eevblog.com/forum/beginners/measuring-battery-voltage-without-consuming-current/
+- During USB suspend change clock source to internal RC from external Xtal(6.8)
+- FRZCLK: you can freeze clock for power saving. still WAKEUPI and VBUSTI interrupts are available while freezing.(21.7.3)
+- Suspend: Clear Suspend Bit, Freeze clock, disable PLL, MCU sleep(21.13)
+- Voltage reference(8.1.1)
+ - to reduce power consumption while power down mode
+- unset ADEN before sleep(24.7)
+
+
+
+
+
+
+
+Lipo
+----
+850mA lasts around 9 hours(07/28)
+
+Sparkfun Polymer Lithium Ion Battery 850mAh:
+https://www.sparkfun.com/products/341
+Lipo Cell spec:
+https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf
+Protection spec:
+http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf
+ min typical max
+ over-charge 4.255 4.280 4.305
+ over-charge discover? 4.030 4.080 4.130
+ over-discharge 2.827 2.900 2.973
+ over-discharge discover 3.022 3.100 3.178
+
+ADC voltage monitor: voltage divider 10K+10K(0.5)
+ ADC=V*0.5/2.56*1024
+
+ V ADC
+ ------------------
+ 4.20 0x347(839)
+ 3.10 0x26b(619)
+
+
+
+
+TROUBLE SHOOT
+-------------
+07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
+ Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
+
+07/18 On Linux, had an USB related trouble; keyboard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
+
+12/07 rn42_rts() read 1 every time. R12 broke in open mode(no coductive), idk why, too much heat with soldering? and PF1 pin was not soldered.
+ It resolved with resoldering PF1 and new resistor on R12.
+
+
+
+
+Done:
+- low battery alert(solid light) 09/04
+- *** Rev.E BT test *** - DONE
+ - with MCP73832, new Schottky, tantalum caps - DONE 12/07
+ * MCP73832 doesn't leak from Vcc pin when unpluged and battery powered
+ 34mV vs 2.07V(MCP73831) at Vcc pin
+ MCP73832 doesn't need revese protection diode D5
+ * PMEG2010ER is very low VF while reverse current/voltage is high
+ VF=0.96 vs 1.98(RB160M-30TR)with Fluke 175
+ Anode of D11 is 680mV vs 20mV(RB160M-30TR)
+ 780mV is still low < 1.4V VBUS plugin detection(21.11)
+ this doesn't cause false VBUS detect
+ and 780mV on MCP73832 Vcc pin is also no problem.
+ D5 can be removed.
+ - ADC divider switching - DONE 12/07
+ * Drain and Source of Q4 Pch was reversed wrongly on Rev.E.
+
+ - reverse current from Lipo charger - DONE 12/07
+ * MCP73832 has no recverse current from Vcc pin unlike MCP73831
+
+
+- Rev.F design - DONE
+ - current measure point - DONE 12/08
+ - change value of cap 68->47 - DONE 12/08
+ - PPTC land pattern: no solder jumper, use 0Ohm resistor instead - CANCEL 12/08
+ - Q4 Pch FET: wrong Drain and Source - DONE 12/08
+ - D5 can be removed. - DONE 12/08
+
+
+
+- BT_INDICATOR LED turns on wrongly when touching line or pin. -- pull-up enabled on PF6/GPIO2 08/30
+- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm
+- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB
+- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done
+- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done
+- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24
+- LINKED: add trace on PIO2 to PF6 07.24
+- Lipo voltage ADC sensing
+- Lipo charger MCP73831: needs capacitor 4.7uF *2
+- USB connection check - 07.01
+- BT on/off check: whether RX line is pulled up? - checking RTS 07.01
+- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01
+- Under voltage lock out UVLO for protection of Lipo - Lipo has discharge protection at 3.100V 07.01
+- Power saving: HHKB scan, BT radio control - 9h with 850mAh, this is enough 07.01
+- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
+
+- wrongly suspended when powered from adapter without USB connection - DONE
+ - suspend event may occur when plug into adapter
+ - and never wake until conected to real USB line
+ - without debug print via USB no problem; CSW(wake just after suspend as real USB line)
+ - seems like USB print causes this problem after suspended
+
+- lose USB connection during power-down mode - DONE
+ - USB initialize code in main() causes this - WRONG
+ - Do not power-down during USB connection is active - DONE 11/11
+ (USB_DeviceState == USB_DEVICE_Configured) is used to check USB connection
+ matrix_power_down() matrix.c - 11/23
+
+- with Nexus5 keyboard and mouse are very laggy.
+ Not confirmed. 01/15
+
+- switch BT host connections - CANCEL 01/15
+ - switch next connection
+ cannot switch connection with version 6.15 at least
+
+- When given power only from wall wart adapter - DONE? not confirmed 01/15
+ - it sleeps. it should not sleep
+ - Configured state without USB connection?
+
+- timer is slow while power down - DONE 11/26
+ - time out interrupt is lost while power down?
+ - interrupt of watchdog timer compensates timer counter(avr/suspend.c)
+
+- repeated CHARGING/FULL_CHARGED - No longer problem 01/15
+ - In LTC sharp pulses are observed.
+ - MCP has no pulse but still has a problem.
+ - needs more wait before read pin state? - NO
+
+- USB plug-in fails while BT - No longer problem 01/15
+ - it ends in suspend state
+ - maybe, not responsive to host enumeration process due to power-down.
+ - matrix_power_down() only when state is unattached - 11/26
+ - need to observe a while
+
diff --git a/keyboard/hhkb_rn42/PowerSave.txt b/keyboard/hhkb/rn42/PowerSave.txt
index 943923c336..4b9c8f415d 100644
--- a/keyboard/hhkb_rn42/PowerSave.txt
+++ b/keyboard/hhkb/rn42/PowerSave.txt
@@ -1,5 +1,28 @@
-RN-42
-=====
+Power Saving
+============
+
+
+MCU+HHKB Power Comsumption
+--------------------------
+Battery drive:
+ idle 18.9mA
+ active 35.8mA
+
+USB powered:
+ 40.0mA
+ 52mA 01/17
+
+Other keyboards:
+HHKB Pro 55mA
+HHKB Pro2 140mA
+HHKB Pro 42mA(Alt)
+HHKB Pro2 52mA(Alt BT controller USB mode)
+HHKB Pro2 88mA(Alt BT controller BT mode connected)
+HHKB Pro2 68mA(Alt BT controller BT mode config mode)
+Poker X 6mA
+Infinity 24mA(TMK)
+ 65mA(kiibohd)
+
HHKB key switch power control
-----------------------------
@@ -63,40 +86,3 @@ S%,1000 status led and connection control don't work
GPIO5: status LED
GPIO6: Connection control
GPIO2: linked status
-
-
-
-
-
-Ver 6.15 04/26/2013
-(c) Roving Networks
-***Settings***
-BTA=00066667BBE9
-BTName=tmkBT-BBE9
-Baudrt(SW4)=115K
-Mode =DTR
-Authen=1
-Bonded=0
-Rem=001BDC06415B
-***ADVANCED Settings***
-SrvName= keyboard/mouse
-SrvClass=0000
-DevClass=1F00
-InqWindw=0012
-PagWindw=0012
-CfgTimer=255
-StatuStr=NULL
-HidFlags=3c
-DTRtimer=8
-KeySwapr=0
-***OTHER Settings***
-Profile= HID
-CfgChar= $
-SniffEna=8010
-LowPower=0 S|,
-TX Power=fff4 SY,
-IOPorts= 0
-IOValues=0
-Sleeptmr=0
-DebugMod=0
-RoleSwch=0
diff --git a/keyboard/hhkb/rn42/RN42.txt b/keyboard/hhkb/rn42/RN42.txt
new file mode 100644
index 0000000000..64c3fdd4ec
--- /dev/null
+++ b/keyboard/hhkb/rn42/RN42.txt
@@ -0,0 +1,408 @@
+RN-42 Bluetooth Module Support
+==============================
+Bluetooth controller board works with HHKB Pro2, JP, Type-S and Type-S JP and it supports both USB and Bluetooth as keyboard output protocol. Bluetooth module Roving Networks/Microchip RN-42 is installed on the board.
+
+
+RN-42:
+http://www.microchip.com/wwwproducts/Devices.aspx?product=RN42
+
+
+Capabitlities:
+- USB keyboard functions
+ completely equivarent to USB controller including mouse keys and NKRO.
+- Switching between USB and Bluetooth
+ You can switch the two connections with BT switch or key combination.
+- RN-42 config mode
+ You can change power/connection configuration of the module if needed.
+- Low battery alert
+ Red LED turns on when low voltage.
+- RN-42 status indicator
+ LED indicates status of Bluetooth connection.
+- Pairing
+ The module stores up to 8 connections.
+- Auto connect
+ The module connects the last connected device automatically.
+- iOS support
+ works as keyboard with iPhone5. No tested completely.
+- Android support
+ works as keyboard and mouse with Nexus5. No tested completely.
+- Mouse keys over BT
+ Note that iOS doesn't accept mouse device.
+
+
+Limitations:
+- Short battery life
+ Around 12hr with 1000mAh
+- No connection switching
+ RN-42 auto-connects to the last connected device.
+ Some of consumer products can switch between devices, for example Logitech K480.
+ http://www.logitech.com/en-us/product/multi-device-keyboard-k480?crid=26
+- HHKB JP requires case modification for BT switch and LEDs.
+ without switch power controlled by MCU? Probably using 3.3V regulator enable pin power of RN-42 can be controlled.
+
+NOTE:
+- LIPO BATTERY IS VERY DANGEROUS, TAKE EXTRA CARE OF YOUR SAFETY AND PROPERTY.
+- RN-42 version 6.15 is supported.
+- No NKRO over Bluetooth
+- Check you country's wiress regulation and certification of RN-42.
+
+Bugs:
+
+Todos:
+
+
+Lipo Battery
+------------
+You can use 3.7V Lithium Ion battery with JST PH 2pin connector and protection circuit.
+Battery space inside HHKB is around 54mm x 50mm and its height is 7mm.
+
+Sparkfun 850mAh
+https://www.sparkfun.com/products/341
+Sparkfun 1000mAh
+https://www.sparkfun.com/products/339
+
+Sparkfun 2000mAh battery won't fit due to its size.
+
+Learn about Lipo battery:
+https://learn.adafruit.com/li-ion-and-lipoly-batteries
+
+
+
+
+
+LED Status
+----------
+Configuring 10 times per sec
+Startup/configuration timer 2 times per sec
+Discoverable/Inquiring/Idle once per sec
+Connected solid on
+
+
+RN-42 Magic Command
+--------------------
+Magic key combination is 'LShift+RShift' by default in case of HHKB.
+
+Here is help.
+
+ ----- Bluetooth RN-42 Help -----
+ i: RN-42 info
+ b: battery voltage
+ Del: enter/exit RN-42 config mode
+ Slck: RN-42 initialize
+ p: pairing
+ u: toggle Force USB mode
+
+ RN-42 info: displays information of the module on console.
+ battery voltage: displays current voltage of battery and uptime.
+ RN-42 initialize: does factory reset and configures RN-42
+ pairing: enters Pairing mode.
+ toggle Force USB mode: switch between USB and Bluetooth
+
+
+RN-42 Config mode
+-----------------
+You can tune/operate RN-42 yourself with config(command) mode.
+
+1. hook up USB cable
+2. run `hid_listen` command in console
+3. turn on Bluetooth switch
+4. press LShift+RShift+Delete(Fn+~) you will see output like followings:
+
+ Entering config mode ...
+ CMD
+ v
+ Ver 6.15 04/26/2013
+ (c) Roving Networks
+
+5. do config with RN-42 commands. See documentations of RN-42.
+6. to exit also press LShift+RShift+Delete(Fn+~)
+
+ Exiting config mode ...
+ ---
+ END
+
+
+RN-42 Initial Configuration
+---------------------------
+RN-42 is configured as SPP device at factory reset, you need to configure it as HID device. This is needed just once first time.
+
+1. hook up USB cable
+2. run `hid_listen` command in console
+3. turn on Bluetooth switch
+4. press LShift+RShift+ScrLk(Fn+O) you will see output like followings:
+
+ Entering config mode ...
+ CMD
+ Ver 6.15 04/26/2013
+ (c) Roving Networks
+ ECHO ON
+ SF,1
+ AOK
+ S-,TmkBT
+ AOK
+ SS,Keyboard/Mouse
+ AOK
+ SM,4
+ AOK
+ SW,8000
+ AOK
+ S~,6
+ AOK
+ SH,003C
+ AOK
+ SY,FFF4
+ AOK
+ R,1
+ Reboot!
+ Exiting config mode ...
+
+5. output of command 'X' after cofiguration
+
+ Ver 6.15 04/26/2013
+ (c) Roving Networks
+ ***Settings***
+ BTA=00066667BBE9
+ BTName=TmkBT-BBE9
+ Baudrt(SW4)=115K
+ Mode =DTR
+ Authen=1
+ PinCod=1234
+ Bonded=0
+ Rem=NONE SET
+ ***ADVANCED Settings***
+ SrvName= Keyboard/Mouse
+ SrvClass=0000
+ DevClass=1F00
+ InqWindw=0100
+ PagWindw=0100
+ CfgTimer=255
+ StatuStr=NULL
+ HidFlags=3c
+ DTRtimer=8
+ KeySwapr=0
+ ***OTHER Settings***
+ Profile= HID
+ CfgChar= $
+ SniffEna=8000
+ LowPower=0
+ TX Power=fff4
+ IOPorts= 0
+ IOValues=0
+ Sleeptmr=0
+ DebugMod=0
+ RoleSwch=0
+
+
+Switch to USB mode
+------------------
+You can switch between USB and Bluetooth with pressing 'LShift+RShift+u'.
+
+
+Pairing mode
+------------
+This disconnects current connect and enter pairing mode.
+
+
+
+
+For deveropment
+===============
+
+RN-42 Serial Connection
+-----------------------
+UART: 115200bps, 8bit, 1-stopbit, non-parity, no flow control
+SSP: 115200bps, 8bit, 1-stopbit, non-parity, no flow control(via Bluetooth)
+
+To enter command mode disconnect the module from host and type '$$$'.(you will see 'CMD') and type '+' to get local echo. To exit type '---'(you will see 'END').
+
+
+RN-42 Commands
+--------------
+S-,tmkBT // Device name
+SS,keyboard/mouse // service name
+SM,4 // Auto Connect DTR mode
+SW,8010 // Sniff enable 0x10*0.625ms=10ms; 50ms is laggish and not much power save
+S~,6 // HID profile
+S~,0 // SPP profile
+SH,003C // HID register
+SY,0004 // Transmit power
+SC,0000 // COD: 000005C0 (see HID spec/Bluegiga doc)
+SD,05C0 // bit 12-8 7 6 5-0
+ // 00101 1 1 0
+ // peripheral pointing keybaord joystick, gamepad, ...
+SM,6 // Pairing mode: auto connect
+SM,4 // Master mode: Connection can be controled with GPIO6
+SF,1 // Factroy reset
+R,1 // reboot
+SR,Z // removes all remote addresses for reconnecting.
+ // can be used to connect another host
+SR,I // registers last inquiry address
+
+
+Operation Modes
+---------------
+SM,3 Auto Connect Master mode
+SM,4 Auto Connect DTR Mode uses GPIO6 to make and break connection(Mode =DTR)
+ confirm: auto connect works and control connection with GPIO6
+SM,5 Auto Connect ANY Mode (Mode =ANY)
+ each time GPIO is set, make inquiry and connect to the first found device
+SM,6 automatically reconnect(Mode =Pair)
+ confirm: auto connect works well but difficult to enter command mode.
+
+
+HID flag register
+-----------------
+SH,0200
+GH
+
+10 0000 0000(0200) default
+00 0011 1000(0038) Combo
+|| | | |\_\____ number of paired devices to which the module can reconnect
+|| | | \_______ send out reports over UART (0xFF <len> <data>)
+|| \__\_________ descriptor type
+|\______________ toggle virtual keyboard on iOS when first connected
+\_______________ Force HID mode if GPIO11 is high on power-up
+
+ Descriptor type:
+ 0000: keybaord
+ 0001: Game Pad
+ 0010: Mouse
+ 0011: Combo
+ 0100: Joystick
+ 1xxx: reserved
+
+
+Out report - Indicator
+----------------------
+0xFE 0x02 0x01 <LED_state>
+
+
+Apple iOS
+---------
+Keyboard can be used with iPhone, but mouse cannot.
+
+
+Android
+-------
+3.7.1.5 Note: To connect with Android phone the modules must wake up 11ms every 2.5seconds.
+
+
+Power Management
+----------------
+Inquiry and Page window Idle or Active (3.1.1)
+ Downside: delay in discovery or connection time
+ SI, // set inquiry scan window(discovery) on/off duty?
+ SJ, // set page scan window(connection)
+ This reduces averaege power >20mA to 5mA(3mA in Sniff mode)
+
+Sniff mode Transmit
+ Sniff mode is disabled by default and radio is active continuously when connected.(25-30mA)
+ In Sniff mode the radio wakes up intermittently and sleeps in very low power mode.(2mA)
+ SW,<val> // set interval timer(*0.625ms) 0000-7FFF
+
+Deep sleep Idle (3.1.2)
+ In this mode the module shuts down completly and only draws about 300uA. To enable this set the most signifant bit(0x8000) of Sniff interaval timer.
+ SW,8320 // deep sleep enable(interval=0x320*0.625=500ms)
+ In normal sleep the firmware is still running in idle mode, and wakes up about 20 times per second to check ports, update LEDs, etc. During deep sleep, the firmware actually stops runnig some tasks and the LEDs only update about once per second.
+ To wake from deep sleep there are three ways: (in worst case wake up takes 5ms)
+ *send a charactor to the UART(first charactor will be lost)
+ *toggle CTS low to high and wait 5ms
+ *wake automatically every slot time(<val>*0.625ms)
+ Once the radio is awake it stay active for exactly 1 second of inactivity and then sleeps again.
+ Downside: latency and data loss
+
+Disable Output driver Idle or Active (3.1.3)
+ S%,1000 // set all GPIO pins(0-11) to inputs.
+
+Lower Transmit Power Idle or Active (3.1.4)
+ SY,<hex> // transmit power setting(takes effect after a power cycle and reboot)
+ Downside: reducing effective range
+
+
+Optimizig for Latency
+---------------------
+By default the firmware is optimized for throughput.
+SQ,16 // set latency bit
+SQ,0 // unset latency bit
+
+
+Configuration timer settings
+----------------------------
+Remote configuration is used for the module to be configured with various commands over Bluetooth(SPP profile only?).
+
+The module has remote configuration timer to allow remote configuration over Bluetooth after power up in Slave mode. In Master modes the remote configuration timer is set to 0(no remote configuration). (In Trigger Master mode the timer is used as an idle timer to break the connection after time expires with no charactors receive.)
+ ST,0 // no remote, no local when connected
+ ST,<1-252> // local and remote with timeout in seconds from power up
+ ST,253 // local only without timeout
+ ST,254 // remote only without timeout
+ ST,255 // local and remote without timeout
+
+
+Commands
+--------
+S7, 7bit mode
+SA, Authenticaiton
+SB, Send break
+SC, Service class
+SD, Device class
+SM,<val> Operation mode
+SP,<string> Pin code(alpahnumeric)
+SQ,<mask> Special configuration(GPIO, discovery mode, low latency, reboot, UART)
+SR,<hex> Store remote address
+SR,Z Erase all address
+SS,<string> Set service name(1-20)**
+ST,<val> Remote configuration timer(Master:0, Slave:0-255, Triger:as idle timer)
+SU,<val> UART baud rate
+SW,<val> low-power sniff mode** deep sleep and wake up every 625us * <val>
+SX,<0|1> bonding enable only acceps device that matches the stored address
+SY,<hex> power setting**
+SZ,<val> non-standard raw baud rate <val>=baud*0.004096
+S~,<val> Profile 0:SPP, 5:APL, 6:HID
+S-,<string> Device name -15 alphanumeric charactors
+S?,<0|1> role switch enable
+S$,<char> command mode char
+$|,<hex> low-power connect mode deep sleep/active(discoverable and connectable) cycle
+D display basic setting
+E display extended setting
+GB display the device's Bluetooth address
+GF display Bluetooth address of connected device
+GK show connection status
+GR show remote address for reconnecting
+G& show GPIO pin
+G<char> show stored setting
++ toggle local echo on/off
+& show GPIO 3,4,6,7(DIP switch)
+C connect to stored remote address
+C,<address> connect last address
+CFI connect and go into fast data mode
+CFR connect and go into fast data mode
+CT,<address>,<val> connect to the address and disconnect after val?
+F,1 fast data mod:
+H display help
+I,<time>,<cod> inquiry scan with <cod>
+IN,<time>,<cod> inquiry scan with <cod>, return without BT name
+IR inquiry scan with 0055AA
+IS inquiry scan with 001F00
+J hide pin code
+K, kill disconnects current connection
+L link quality
+M show modem signlal status
+O display other settings
+P,<char> pass through?
+Q quiet mode make the module not discoverable
+Q,0 discoverable and connectable
+Q,1 not discoverable and not connectable
+Q,2 not discoverable and connectable
+Q,? display current quiet mode
+R,1 reboot
+T,<0|1> pass received data while in command mode
+U,<baud>,<parity> change UART setting tentatively
+V display firmware version
+W wake from quiet mode enable discovery and connection
+Z deep sleep mode(<2mA)
+
+
+Reset to Factory Default
+------------------------
+SF,1
+R,1
diff --git a/keyboard/hhkb_rn42/rn42/battery.c b/keyboard/hhkb/rn42/battery.c
index 0320e1baf1..7e868c9646 100644
--- a/keyboard/hhkb_rn42/rn42/battery.c
+++ b/keyboard/hhkb/rn42/battery.c
@@ -20,7 +20,10 @@ void battery_init(void)
// Ref:2.56V band-gap, Input:ADC0(PF0), Prescale:128(16MHz/128=125KHz)
ADMUX = (1<<REFS1) | (1<<REFS0);
ADCSRA = (1<<ADPS2) | (1<<ADPS1) | (1<<ADPS0);
- ADCSRA |= (1<<ADEN);
+ // digital input buffer disable(24.9.5)
+ DIDR0 = (1<<ADC0D) | (1<<ADC4D) | (1<<ADC7D);
+ DIDR1 = (1<<AIN0D);
+ DIDR2 = (1<<ADC8D) | (1<<ADC9D) | (1<<ADC11D) | (1<<ADC12D) | (1<<ADC13D);
// ADC disable voltate divider(PF4)
DDRF |= (1<<4);
@@ -88,23 +91,14 @@ uint16_t battery_voltage(void)
PORTF |= (1<<4);
volatile uint16_t bat;
- //ADCSRA |= (1<<ADEN);
-
- // discard first result
- ADCSRA |= (1<<ADSC);
- while (ADCSRA & (1<<ADSC)) ;
- bat = ADC;
-
- // discard second result
- ADCSRA |= (1<<ADSC);
- while (ADCSRA & (1<<ADSC)) ;
- bat = ADC;
+ ADCSRA |= (1<<ADEN);
+ _delay_ms(1); // wait for charging S/H capacitance
ADCSRA |= (1<<ADSC);
while (ADCSRA & (1<<ADSC)) ;
bat = ADC;
- //ADCSRA &= ~(1<<ADEN);
+ ADCSRA &= ~(1<<ADEN);
// ADC disable voltate divider(PF4)
DDRF |= (1<<4);
diff --git a/keyboard/hhkb_rn42/rn42/battery.h b/keyboard/hhkb/rn42/battery.h
index 180d4dcfaa..180d4dcfaa 100644
--- a/keyboard/hhkb_rn42/rn42/battery.h
+++ b/keyboard/hhkb/rn42/battery.h
diff --git a/keyboard/hhkb_rn42/rn42/main.c b/keyboard/hhkb/rn42/main.c
index 43d887067d..83d9950388 100644
--- a/keyboard/hhkb_rn42/rn42/main.c
+++ b/keyboard/hhkb/rn42/main.c
@@ -17,8 +17,8 @@
static int8_t sendchar_func(uint8_t c)
{
- sendchar(c); // LUFA
xmit(c); // SUART
+ sendchar(c); // LUFA
return 0;
}
@@ -63,7 +63,7 @@ int main(void)
USB_USBTask();
#endif
}
- print("USB configured.\n");
+ print("\nUSB init\n");
rn42_init();
rn42_task_init();
@@ -82,10 +82,19 @@ int main(void)
sleep_led_init();
#endif
- print("Keyboard start.\n");
+ print("Keyboard start\n");
while (1) {
- while (USB_DeviceState == DEVICE_STATE_Suspended) {
- suspend_power_down(WDTO_120MS);
+ while (rn42_rts() && // RN42 is off
+ USB_DeviceState == DEVICE_STATE_Suspended) {
+ print("[s]");
+ matrix_power_down();
+ suspend_power_down();
+ suspend_power_down();
+ suspend_power_down();
+ suspend_power_down();
+ suspend_power_down();
+ suspend_power_down();
+ suspend_power_down();
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
USB_Device_SendRemoteWakeup();
}
diff --git a/keyboard/hhkb_rn42/rn42/rn42.c b/keyboard/hhkb/rn42/rn42.c
index 1565b4cf14..756285d7bb 100644
--- a/keyboard/hhkb_rn42/rn42/rn42.c
+++ b/keyboard/hhkb/rn42/rn42.c
@@ -4,6 +4,7 @@
#include "serial.h"
#include "rn42.h"
#include "print.h"
+#include "timer.h"
#include "wait.h"
@@ -47,11 +48,39 @@ void rn42_init(void)
serial_init();
}
+int16_t rn42_getc(void)
+{
+ return serial_recv2();
+}
+
+const char *rn42_gets(uint16_t timeout)
+{
+ static char s[24];
+ uint16_t t = timer_read();
+ uint8_t i = 0;
+ int16_t c;
+ while (i < 23 && timer_elapsed(t) < timeout) {
+ if ((c = rn42_getc()) != -1) {
+ if ((char)c == '\r') continue;
+ if ((char)c == '\n') break;
+ s[i++] = c;
+ }
+ }
+ s[i] = '\0';
+ return s;
+}
+
void rn42_putc(uint8_t c)
{
serial_send(c);
}
+void rn42_puts(char *s)
+{
+ while (*s)
+ serial_send(*s++);
+}
+
bool rn42_autoconnecting(void)
{
// GPIO6 for control connection(high: auto connect, low: disconnect)
@@ -97,7 +126,7 @@ bool rn42_linked(void)
// Hi-Z: Not powered
// High: Linked
// Low: Connecting
- return !rn42_rts() && PINF&(1<<6);
+ return PINF&(1<<6);
}
diff --git a/keyboard/hhkb_rn42/rn42/rn42.h b/keyboard/hhkb/rn42/rn42.h
index 5283a3648c..db6916fe86 100644
--- a/keyboard/hhkb_rn42/rn42/rn42.h
+++ b/keyboard/hhkb/rn42/rn42.h
@@ -7,7 +7,10 @@ host_driver_t rn42_driver;
host_driver_t rn42_config_driver;
void rn42_init(void);
+int16_t rn42_getc(void);
+const char *rn42_gets(uint16_t timeout);
void rn42_putc(uint8_t c);
+void rn42_puts(char *s);
bool rn42_autoconnecting(void);
void rn42_autoconnect(void);
void rn42_disconnect(void);
diff --git a/keyboard/hhkb/rn42/rn42_task.c b/keyboard/hhkb/rn42/rn42_task.c
new file mode 100644
index 0000000000..5107fef483
--- /dev/null
+++ b/keyboard/hhkb/rn42/rn42_task.c
@@ -0,0 +1,478 @@
+#include <stdint.h>
+#include <string.h>
+#include <avr/pgmspace.h>
+#include <avr/eeprom.h>
+#include "keycode.h"
+#include "serial.h"
+#include "host.h"
+#include "action.h"
+#include "action_util.h"
+#include "lufa.h"
+#include "rn42_task.h"
+#include "print.h"
+#include "debug.h"
+#include "timer.h"
+#include "wait.h"
+#include "command.h"
+#include "battery.h"
+
+static bool config_mode = false;
+static bool force_usb = false;
+
+static void status_led(bool on)
+{
+ if (on) {
+ DDRE |= (1<<6);
+ PORTE &= ~(1<<6);
+ } else {
+ DDRE |= (1<<6);
+ PORTE |= (1<<6);
+ }
+}
+
+void rn42_task_init(void)
+{
+ battery_init();
+}
+
+void rn42_task(void)
+{
+ int16_t c;
+ // Raw mode: interpret output report of LED state
+ while ((c = rn42_getc()) != -1) {
+ // LED Out report: 0xFE, 0x02, 0x01, <leds>
+ // To get the report over UART set bit3 with SH, command.
+ static enum {LED_INIT, LED_FE, LED_02, LED_01} state = LED_INIT;
+ switch (state) {
+ case LED_INIT:
+ if (c == 0xFE) state = LED_FE;
+ else {
+ if (0x0 <= c && c <= 0x7f) xprintf("%c", c);
+ else xprintf(" %02X", c);
+ }
+ break;
+ case LED_FE:
+ if (c == 0x02) state = LED_02;
+ else state = LED_INIT;
+ break;
+ case LED_02:
+ if (c == 0x01) state = LED_01;
+ else state = LED_INIT;
+ break;
+ case LED_01:
+ dprintf("LED status: %02X\n", c);
+ rn42_set_leds(c);
+ state = LED_INIT;
+ break;
+ default:
+ state = LED_INIT;
+ }
+ }
+
+ /* Bluetooth mode when ready */
+ if (!config_mode && !force_usb) {
+ if (!rn42_rts() && host_get_driver() != &rn42_driver) {
+ clear_keyboard();
+ host_set_driver(&rn42_driver);
+ } else if (rn42_rts() && host_get_driver() != &lufa_driver) {
+ clear_keyboard();
+ host_set_driver(&lufa_driver);
+ }
+ }
+
+
+ static uint16_t prev_timer = 0;
+ uint16_t e = timer_elapsed(prev_timer);
+ if (e > 1000) {
+ /* every second */
+ prev_timer += e/1000*1000;
+
+ /* Low voltage alert */
+ uint8_t bs = battery_status();
+ if (bs == LOW_VOLTAGE) {
+ battery_led(LED_ON);
+ } else {
+ battery_led(LED_CHARGER);
+ }
+
+ /* every minute */
+ uint32_t t = timer_read32()/1000;
+ if (t%60 == 0) {
+ uint16_t v = battery_voltage();
+ uint8_t h = t/3600;
+ uint8_t m = t%3600/60;
+ uint8_t s = t%60;
+ dprintf("%02u:%02u:%02u\t%umV\n", h, m, s, v);
+ /* TODO: xprintf doesn't work for this.
+ xprintf("%02u:%02u:%02u\t%umV\n", (t/3600), (t%3600/60), (t%60), v);
+ */
+ }
+ }
+
+
+ /* Connection monitor */
+ if (!rn42_rts() && rn42_linked()) {
+ status_led(true);
+ } else {
+ status_led(false);
+ }
+}
+
+
+
+/******************************************************************************
+ * Command
+ ******************************************************************************/
+static host_driver_t *prev_driver = &rn42_driver;
+
+static void print_rn42(void)
+{
+ int16_t c;
+ while ((c = rn42_getc()) != -1) {
+ xprintf("%c", c);
+ }
+}
+
+static void clear_rn42(void)
+{
+ while (rn42_getc() != -1) ;
+}
+
+#define SEND_STR(str) send_str(PSTR(str))
+#define SEND_COMMAND(cmd) send_command(PSTR(cmd))
+
+static void send_str(const char *str)
+{
+ uint8_t c;
+ while ((c = pgm_read_byte(str++)))
+ rn42_putc(c);
+}
+
+static const char *send_command(const char *cmd)
+{
+ static const char *s;
+ send_str(cmd);
+ wait_ms(500);
+ s = rn42_gets(100);
+ xprintf("%s\r\n", s);
+ print_rn42();
+ return s;
+}
+
+static void enter_command_mode(void)
+{
+ prev_driver = host_get_driver();
+ clear_keyboard();
+ host_set_driver(&rn42_config_driver); // null driver; not to send a key to host
+ rn42_disconnect();
+ while (rn42_linked()) ;
+
+ print("Entering config mode ...\n");
+ wait_ms(1100); // need 1 sec
+ SEND_COMMAND("$$$");
+ wait_ms(600); // need 1 sec
+ print_rn42();
+ const char *s = SEND_COMMAND("v\r\n");
+ if (strncmp("v", s, 1) != 0) SEND_COMMAND("+\r\n"); // local echo on
+}
+
+static void exit_command_mode(void)
+{
+ print("Exiting config mode ...\n");
+ SEND_COMMAND("---\r\n"); // exit
+
+ rn42_autoconnect();
+ clear_keyboard();
+ host_set_driver(prev_driver);
+}
+
+static void init_rn42(void)
+{
+ // RN-42 configure
+ if (!config_mode) enter_command_mode();
+ SEND_COMMAND("SF,1\r\n"); // factory defaults
+ SEND_COMMAND("S-,TmkBT\r\n");
+ SEND_COMMAND("SS,Keyboard/Mouse\r\n");
+ SEND_COMMAND("SM,4\r\n"); // auto connect(DTR)
+ SEND_COMMAND("SW,8000\r\n"); // Sniff disable
+ SEND_COMMAND("S~,6\r\n"); // HID profile
+ SEND_COMMAND("SH,003C\r\n"); // combo device, out-report, 4-reconnect
+ SEND_COMMAND("SY,FFF4\r\n"); // transmit power -12
+ SEND_COMMAND("R,1\r\n");
+ if (!config_mode) exit_command_mode();
+}
+
+#if 0
+// Switching connections
+// NOTE: Remote Address doesn't work in the way manual says.
+// EEPROM address for link store
+#define RN42_LINK0 (uint8_t *)128
+#define RN42_LINK1 (uint8_t *)140
+#define RN42_LINK2 (uint8_t *)152
+#define RN42_LINK3 (uint8_t *)164
+static void store_link(uint8_t *eeaddr)
+{
+ enter_command_mode();
+ SEND_STR("GR\r\n"); // remote address
+ const char *s = rn42_gets(500);
+ if (strcmp("GR", s) == 0) s = rn42_gets(500); // ignore local echo
+ xprintf("%s(%d)\r\n", s, strlen(s));
+ if (strlen(s) == 12) {
+ for (int i = 0; i < 12; i++) {
+ eeprom_write_byte(eeaddr+i, *(s+i));
+ dprintf("%c ", *(s+i));
+ }
+ dprint("\r\n");
+ }
+ exit_command_mode();
+}
+
+static void restore_link(const uint8_t *eeaddr)
+{
+ enter_command_mode();
+ SEND_COMMAND("SR,Z\r\n"); // remove remote address
+ SEND_STR("SR,"); // set remote address from EEPROM
+ for (int i = 0; i < 12; i++) {
+ uint8_t c = eeprom_read_byte(eeaddr+i);
+ rn42_putc(c);
+ dprintf("%c ", c);
+ }
+ dprintf("\r\n");
+ SEND_COMMAND("\r\n");
+ SEND_COMMAND("R,1\r\n"); // reboot
+ exit_command_mode();
+}
+
+static const char *get_link(uint8_t * eeaddr)
+{
+ static char s[13];
+ for (int i = 0; i < 12; i++) {
+ uint8_t c = eeprom_read_byte(eeaddr+i);
+ s[i] = c;
+ }
+ s[12] = '\0';
+ return s;
+}
+#endif
+
+static void pairing(void)
+{
+ enter_command_mode();
+ SEND_COMMAND("SR,Z\r\n"); // remove remote address
+ SEND_COMMAND("R,1\r\n"); // reboot
+ exit_command_mode();
+}
+
+bool command_extra(uint8_t code)
+{
+ uint32_t t;
+ uint16_t b;
+ switch (code) {
+ case KC_H:
+ case KC_SLASH: /* ? */
+ print("\n\n----- Bluetooth RN-42 Help -----\n");
+ print("i: RN-42 info\n");
+ print("b: battery voltage\n");
+ print("Del: enter/exit RN-42 config mode\n");
+ print("Slck: RN-42 initialize\n");
+#if 0
+ print("1-4: restore link\n");
+ print("F1-F4: store link\n");
+#endif
+ print("p: pairing\n");
+
+ if (config_mode) {
+ return true;
+ } else {
+ print("u: toggle Force USB mode\n");
+ return false; // to display default command help
+ }
+ case KC_P:
+ pairing();
+ return true;
+#if 0
+ /* Store link address to EEPROM */
+ case KC_F1:
+ store_link(RN42_LINK0);
+ return true;
+ case KC_F2:
+ store_link(RN42_LINK1);
+ return true;
+ case KC_F3:
+ store_link(RN42_LINK2);
+ return true;
+ case KC_F4:
+ store_link(RN42_LINK3);
+ return true;
+ /* Restore link address to EEPROM */
+ case KC_1:
+ restore_link(RN42_LINK0);
+ return true;
+ case KC_2:
+ restore_link(RN42_LINK1);
+ return true;
+ case KC_3:
+ restore_link(RN42_LINK2);
+ return true;
+ case KC_4:
+ restore_link(RN42_LINK3);
+ return true;
+#endif
+ case KC_I:
+ print("\n----- RN-42 info -----\n");
+ xprintf("protocol: %s\n", (host_get_driver() == &rn42_driver) ? "RN-42" : "LUFA");
+ xprintf("force_usb: %X\n", force_usb);
+ xprintf("rn42: %s\n", rn42_rts() ? "OFF" : (rn42_linked() ? "CONN" : "ON"));
+ xprintf("rn42_autoconnecting(): %X\n", rn42_autoconnecting());
+ xprintf("config_mode: %X\n", config_mode);
+ xprintf("USB State: %s\n",
+ (USB_DeviceState == DEVICE_STATE_Unattached) ? "Unattached" :
+ (USB_DeviceState == DEVICE_STATE_Powered) ? "Powered" :
+ (USB_DeviceState == DEVICE_STATE_Default) ? "Default" :
+ (USB_DeviceState == DEVICE_STATE_Addressed) ? "Addressed" :
+ (USB_DeviceState == DEVICE_STATE_Configured) ? "Configured" :
+ (USB_DeviceState == DEVICE_STATE_Suspended) ? "Suspended" : "?");
+ xprintf("battery: ");
+ switch (battery_status()) {
+ case FULL_CHARGED: xprintf("FULL"); break;
+ case CHARGING: xprintf("CHARG"); break;
+ case DISCHARGING: xprintf("DISCHG"); break;
+ case LOW_VOLTAGE: xprintf("LOW"); break;
+ default: xprintf("?"); break;
+ };
+ xprintf("\n");
+ xprintf("RemoteWakeupEnabled: %X\n", USB_Device_RemoteWakeupEnabled);
+ xprintf("VBUS: %X\n", USBSTA&(1<<VBUS));
+ t = timer_read32()/1000;
+ uint8_t d = t/3600/24;
+ uint8_t h = t/3600;
+ uint8_t m = t%3600/60;
+ uint8_t s = t%60;
+ xprintf("uptime: %02u %02u:%02u:%02u\n", d, h, m, s);
+#if 0
+ xprintf("LINK0: %s\r\n", get_link(RN42_LINK0));
+ xprintf("LINK1: %s\r\n", get_link(RN42_LINK1));
+ xprintf("LINK2: %s\r\n", get_link(RN42_LINK2));
+ xprintf("LINK3: %s\r\n", get_link(RN42_LINK3));
+#endif
+ return true;
+ case KC_B:
+ // battery monitor
+ t = timer_read32()/1000;
+ b = battery_voltage();
+ xprintf("BAT: %umV\t", b);
+ xprintf("%02u:", t/3600);
+ xprintf("%02u:", t%3600/60);
+ xprintf("%02u\n", t%60);
+ return true;
+ case KC_U:
+ if (config_mode) return false;
+ if (force_usb) {
+ print("Auto mode\n");
+ force_usb = false;
+ } else {
+ print("USB mode\n");
+ force_usb = true;
+ clear_keyboard();
+ host_set_driver(&lufa_driver);
+ }
+ return true;
+ case KC_DELETE:
+ /* RN-42 Command mode */
+ if (rn42_autoconnecting()) {
+ enter_command_mode();
+
+ command_state = CONSOLE;
+ config_mode = true;
+ } else {
+ exit_command_mode();
+
+ command_state = ONESHOT;
+ config_mode = false;
+ }
+ return true;
+ case KC_SCROLLLOCK:
+ init_rn42();
+ return true;
+ default:
+ if (config_mode)
+ return true;
+ else
+ return false; // yield to default command
+ }
+ return true;
+}
+
+/*
+ * RN-42 Command mode
+ * sends charactors to the module
+ */
+static uint8_t code2asc(uint8_t code);
+bool command_console_extra(uint8_t code)
+{
+ rn42_putc(code2asc(code));
+ return true;
+}
+
+// convert keycode into ascii charactor
+static uint8_t code2asc(uint8_t code)
+{
+ bool shifted = (get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))) ? true : false;
+ switch (code) {
+ case KC_A: return (shifted ? 'A' : 'a');
+ case KC_B: return (shifted ? 'B' : 'b');
+ case KC_C: return (shifted ? 'C' : 'c');
+ case KC_D: return (shifted ? 'D' : 'd');
+ case KC_E: return (shifted ? 'E' : 'e');
+ case KC_F: return (shifted ? 'F' : 'f');
+ case KC_G: return (shifted ? 'G' : 'g');
+ case KC_H: return (shifted ? 'H' : 'h');
+ case KC_I: return (shifted ? 'I' : 'i');
+ case KC_J: return (shifted ? 'J' : 'j');
+ case KC_K: return (shifted ? 'K' : 'k');
+ case KC_L: return (shifted ? 'L' : 'l');
+ case KC_M: return (shifted ? 'M' : 'm');
+ case KC_N: return (shifted ? 'N' : 'n');
+ case KC_O: return (shifted ? 'O' : 'o');
+ case KC_P: return (shifted ? 'P' : 'p');
+ case KC_Q: return (shifted ? 'Q' : 'q');
+ case KC_R: return (shifted ? 'R' : 'r');
+ case KC_S: return (shifted ? 'S' : 's');
+ case KC_T: return (shifted ? 'T' : 't');
+ case KC_U: return (shifted ? 'U' : 'u');
+ case KC_V: return (shifted ? 'V' : 'v');
+ case KC_W: return (shifted ? 'W' : 'w');
+ case KC_X: return (shifted ? 'X' : 'x');
+ case KC_Y: return (shifted ? 'Y' : 'y');
+ case KC_Z: return (shifted ? 'Z' : 'z');
+ case KC_1: return (shifted ? '!' : '1');
+ case KC_2: return (shifted ? '@' : '2');
+ case KC_3: return (shifted ? '#' : '3');
+ case KC_4: return (shifted ? '$' : '4');
+ case KC_5: return (shifted ? '%' : '5');
+ case KC_6: return (shifted ? '^' : '6');
+ case KC_7: return (shifted ? '&' : '7');
+ case KC_8: return (shifted ? '*' : '8');
+ case KC_9: return (shifted ? '(' : '9');
+ case KC_0: return (shifted ? ')' : '0');
+ case KC_ENTER: return '\n';
+ case KC_ESCAPE: return 0x1B;
+ case KC_BSPACE: return '\b';
+ case KC_TAB: return '\t';
+ case KC_SPACE: return ' ';
+ case KC_MINUS: return (shifted ? '_' : '-');
+ case KC_EQUAL: return (shifted ? '+' : '=');
+ case KC_LBRACKET: return (shifted ? '{' : '[');
+ case KC_RBRACKET: return (shifted ? '}' : ']');
+ case KC_BSLASH: return (shifted ? '|' : '\\');
+ case KC_NONUS_HASH: return (shifted ? '|' : '\\');
+ case KC_SCOLON: return (shifted ? ':' : ';');
+ case KC_QUOTE: return (shifted ? '"' : '\'');
+ case KC_GRAVE: return (shifted ? '~' : '`');
+ case KC_COMMA: return (shifted ? '<' : ',');
+ case KC_DOT: return (shifted ? '>' : '.');
+ case KC_SLASH: return (shifted ? '?' : '/');
+ case KC_DELETE: return '\0'; // Delete to disconnect
+ default: return ' ';
+ }
+}
diff --git a/keyboard/hhkb_rn42/rn42/rn42_task.h b/keyboard/hhkb/rn42/rn42_task.h
index 8f6c3ab64d..8f6c3ab64d 100644
--- a/keyboard/hhkb_rn42/rn42/rn42_task.h
+++ b/keyboard/hhkb/rn42/rn42_task.h
diff --git a/keyboard/hhkb_rn42/rn42/suart.S b/keyboard/hhkb/rn42/suart.S
index 9fa5452928..9fa5452928 100644
--- a/keyboard/hhkb_rn42/rn42/suart.S
+++ b/keyboard/hhkb/rn42/suart.S
diff --git a/keyboard/hhkb_rn42/rn42/suart.h b/keyboard/hhkb/rn42/suart.h
index 72725b998f..72725b998f 100644
--- a/keyboard/hhkb_rn42/rn42/suart.h
+++ b/keyboard/hhkb/rn42/suart.h
diff --git a/keyboard/hhkb_rn42/MEMO.txt b/keyboard/hhkb_rn42/MEMO.txt
deleted file mode 100644
index 337dad6039..0000000000
--- a/keyboard/hhkb_rn42/MEMO.txt
+++ /dev/null
@@ -1,523 +0,0 @@
-Roving RN-42
-============
-
-Bug:
-- with Nexus5 keyboard and mouse are very laggy.
-
-- lose USB connection during power-down mode
- - USB initialize code in main() causes this - WRONG
- - Do not power-down during USB connection is active - DONE 11/11
- (USB_DeviceState == USB_DEVICE_Configured) is used to check USB connection
- matrix_power_down() matrix.c - 11/23
-
-Todo:
-
-Design:
-- remove MCU dependent power saving code from core/keyboard
- - it should be located in project matrix.c - DONE 11/23
-- HHKB matrix.c needs matrix_prev?
- - is_modified() is obsolete now. really needs?
-
-
-LUFA:
-USB connection check: state of USB deivce
-- USB_DeviceState:
- USB_Deivce_State_t { Unattached, Powered, Default, Addressed, Configured*, Suspended* }
-- USB_IsInitialized: state of LUFA core setup
- becomes true in USB_Init() USBController_AVR8.c
- becomes false in USB_Disable() USBController_AVR8.c
-- USB_VBUS_GetStatus(): state of VBUS(power/connection)
-- USB_Disable() detaches, disables all interrupts, controller, PLL, regulater.
-
-
-Power saving:
-- confirm suspend mode lufa.c: matrix_power_*, suspend_wakeup_condition
-- 8MHz clock
-- When not connected in a few minutes get into deep sleep to save battery life
-- CTS is needed for waking up from deep sleep? How deep sleep is activated?
-- firmware controlled 3.3V DC converter to switch on/off BT module
-- sleep MCU and BT module(keyboard is not used)
-- deep sleep MCU and BT module(keyboard is not used for long time)
-- deep sleep MCU and turn off BT module(keyboard is not used and not connected)
-- Battery ADC; switching, high resistance
- - switching gnd end of divider with PF4
- - high resistor 100K/1M?
- capacitor 10nF
- http://www.eevblog.com/forum/beginners/measuring-battery-voltage-without-consuming-current/
-- During USB suspend change clock source to internal RC from external Xtal(6.8)
-- FRZCLK: you can freeze clock for power saving. still WAKEUPI and VBUSTI interrupts are available while freezing.(21.7.3)
-- Suspend: Clear Suspend Bit, Freeze clock, disable PLL, MCU sleep(21.13)
-
-Improving:
-- BT LED; connecting, linked, sleeping, deep sleeping
-- Battry LED; blink(using timer?)
-- move rn42 to protocol directory when it becomes reusable stack
-- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
-- ADC resolution
- AVR120
- AVR32138
-
-Testing:
-- Factroy reset doesn't work; need to **test again** 10K pull-up is too high?
-- Lipo voltage ADC value is not stabilized
-- DCDC converter: squeaky inducter; try other inductors
-
-- Keymap layer bug: during space is pressed(mousekey) press Fn(HHKB) then release space before Fn, in result HHKB layer is locked(toggled) unintentionally.
-
-
-Done:
-- low battery alert(solid light) 09/04
-
-
-Power routing
--------------
-Current:
-(USB) +---(Lipo)
- | | |
- | | +------+ DPDT
- | | |Switch/-----------------------+
- | | +------+ |
- | +-------+ | |
- +-|Charger| | |
- | +-------+ | +---+ |
- | | |MCU| |
- | | +---+ |
- | | | |
- | | | |
-+--------------+ +-----+ +------+ +---/--+ +-----+
-|Power Selector|--|DC 5V|--|DC3.3V|---|Switch|----|RN-42|
-+--------------+ +-----+ +------+ +------+ +-----+
-USB Power is boosted unnecessarily, not harmful?
-
-Idea 1:
-(USB) +---(Lipo)
- | | |
- | | +------+ DPDT
- | | |Switch/----------+
- | | +------+ |
- | +-------+ | |
- +-|Charger| | |
- | +-------+ | +---+ |
- | +-----+ |MCU| |
- | |DC 5V| +---+ |
- | +-----+ | |
- | | | |
-+--------------+ | +---/--+ +------+ +-----+
-|Power Selector|-----+---|Switch|----|DC3.3V|-----|RN-42|
-+--------------+ +------+ +------+ +-----+
-To enable BT when USB powered it still needs to turn siwtch on, Lipo consumes quinscent current at 5V converter in vain.(Not good)
-
-Idea 2:
-(USB) +---(Lipo)
- | | |
- | | +------+
- | | |Switch|
- | | +------+
- | +-------+ |
- +-|Charger| |
- | +-------+ | +---+
- | +-----+ |MCU|----+ Controlled by firmware
- | |DC 5V| +---+ | On: Lipo powered
- | +-----+ | | Off: USB powered
- | | | |enable
-+--------------+ | +------+ +-----+
-|Power Selector|-----+---|DC3.3V|-----|RN-42|
-+--------------+ +------+ +-----+
-MCU can controlled power of RN-42 without hardware switch.
-When USB powered and switch is on Lipo consumes quinscent current at 5V converter in vain.(Not good)
-
-Idea 3:
-(USB) +---(Lipo)
- | | |
- | | +------+
- | | |Switch|SPST(or without)
- | | +------+
- | +-------+ |
- +-|Charger| |
- | +-------+ | +---+
- | | |MCU|----+ Controlled by firmware
- | | +---+ | On: Lipo powered
- | | | | Off: USB powered
- | | | |enable
-+--------------+ +-----+ +------+ +-----+
-|Power Selector|-|DC 5V|-|DC3.3V|-----|RN-42|
-+--------------+ +-----+ +------+ +-----+
-Switch is needed to save Lipo when not used because decent power saving is not available now. If firmware can turn off BT module completely and make MCU deep sleep the switch will be not even needed.
-
-
-
-
-
-DONE:
-- BT_INDICATOR LED turns on wrongly when touching line or pin. -- pull-up enabled on PF6/GPIO2 08/30
-- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm
-- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB
-- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done
-- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done
-- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24
-- LINKED: add trace on PIO2 to PF6 07.24
-- Lipo voltage ADC sensing
-- Lipo charger MCP73831: needs capacitor 4.7uF *2
-- USB connection check - 07.01
-- BT on/off check: whether RX line is pulled up? - checking RTS 07.01
-- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01
-- Under voltage lock out UVLO for protection of Lipo - Lipo has discharge protection at 3.100V 07.01
-- Power saving: HHKB scan, BT radio control - 9h with 850mAh, this is enough 07.01
-- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
-
-
-
-TROUBLE SHOOT
--------------
-07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
- Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
-
-07/18 On Linux, had an USB related trouble; keyobard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
-
-
-
-Lipo
-----
-850mA lasts around 9 hours(07/28)
-
-Sparkfun Polymer Lithium Ion Battery 850mAh:
-https://www.sparkfun.com/products/341
-Lipo Cell spec:
-https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf
-Protection spec:
-http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf
- min typical max
- over-charge 4.255 4.280 4.305
- over-charge discover? 4.030 4.080 4.130
- over-discharge 2.827 2.900 2.973
- over-discharge discover 3.022 3.100 3.178
-
-ADC voltage monitor: voltage divider 10K+10K(0.5)
- ADC=V*0.5/2.56*1024
-
- V ADC
- ------------------
- 4.20 0x347(839)
- 3.10 0x26b(619)
-
-
-
-
-Configuration
--------------
-Ver 6.15 04/26/2013
-(c) Roving Networks
-***Settings***
-BTA=0006664B3AE3
-BTName=tmkBT-3AE3
-Baudrt(SW4)=115K
-Mode =DTR
-Authen=2
-Bonded=0
-Rem=000000000000
-***ADVANCED Settings***
-SrvName= keyboard/mouse
-SrvClass=0000
-DevClass=0000
-InqWindw=0100
-PagWindw=0100
-CfgTimer=255
-StatuStr=NULL
-HidFlags=3c
-DTRtimer=8
-KeySwapr=0
-***OTHER Settings***
-Profile= HID
-CfgChar= $
-SniffEna=8010
-LowPower=0
-TX Power=0
-IOPorts= 0
-IOValues=0
-Sleeptmr=0
-DebugMod=0
-RoleSwch=0
-
-
-
-Serial connection
------------------
-Serial line: 115200bps, 8bit, 1-stopbit, non-parity, no flow control
-SSP: 115200bps, 8bit, 1-stopbit, non-parity, no flow control(via Bluetooth)
-
-To enter command mode disconnect the module from host and type '$$$'.(you will see 'CMD')
-To exit type '---'(you will see 'END') and '+' to get local echo.
-
-
-
-Setting command mode
---------------------
-S-,tmkBT // Device name
-SS,keyboard/mouse // service name
-SM,4 // Auto Connect DTR mode
-SW,8010 // Sniff enable 0x10*0.625ms=10ms; 50ms is laggish and not much power save
-S~,6 // HID profile
-SH,003C // HID register
-SY,0004 // Transmit power
-
-
-
-
-Other options:
-SC,0000 // COD: 000005C0 (see HID spec/Bluegiga doc)
-SD,05C0 // bit 12-8 7 6 5-0
- // 00101 1 1 0
- // peripheral pointing keybaord joystick, gamepad, ...
-SM,6 // Pairing mode: auto connect
-SM,4 // Master mode: Connection can be controled with GPIO6
-
-
-
-
-HID profile
------------
-S~,6 HID profile
-S~,0 SPP profile
-R,1 reboot
-
-
-Apple iOS
----------
-Keyboard can be used with iPhone, but mouse cannot.
-To operate iOS with keyboard is not so useful, though.
-There may be iOS specific scancodes?
-
-
-HID flag register
------------------
-SH,0200
-GH
-
-10 0000 0000(0200) default
-00 0011 1000(0038) Combo
-|| | | |\_\____ number of paired devices to which the module can reconnect
-|| | | \_______ send out reports over UART (0xFF <len> <data>)
-|| \__\_________ descriptor type
-|\______________ toggle virtual keyboard on iOS when first connected
-\_______________ Force HID mode if GPIO11 is high on power-up
-
- Descriptor type:
- 0000: keybaord
- 0001: Game Pad
- 0010: Mouse
- 0011: Combo
- 0100: Joystick
- 1xxx: reserved
-
-
-Out report - Indicator
-----------------------
-0xFE 0x02 0x01 <LED_state>
-
-
-LED Status
-----------
-Configuring 10 times per sec
-Startup/configuration timer 2 times per sec
-Discoverable/Inquiring/Idle once per sec
-Connected solid on
-
-
-Pairing
--------
-First, host initiates pairing process and once it is done, auto connect will work thereafter.
-SM,3 Master mode
-SM,4 Auto Connect DTR Mode uses GPIO6 to make and break connection(Mode =DTR)
- confirm: auto connect works and control connection with GPIO6
-SM,5 Auto Connect ANY Mode (Mode =ANY)
- each time GPIO is set, make inquiry and connect to the first found device
-SM,6 automatically reconnect(Mode =Pair)
- confirm: auto connect works well but difficult to enter command mode.
-
-SR,Z removes all remote addresses for reconnecting.
- can be used to connect another host
-SR,I registers last inquiry address
-
-
-Fast data mode
---------------
-The module enters fast data mode after 'remote configuration timer' window is passed from power on.
-In this mode the module does not accept '$$$' to enter command mode.
-
-Power Management
-----------------
-Inquiry and Page window Idle or Active (3.1.1)
- Downside: delay in discovery or connection time
- SI, // set inquiry scan window(discovery) on/off duty?
- SJ, // set page scan window(connection)
- This reduces averaege power >20mA to 5mA(3mA in Sniff mode)
-
-Sniff mode Transmit
- Sniff mode is disabled by default and radio is active continuously when connected.(25-30mA)
- In Sniff mode the radio wakes up intermittently and sleeps in very low power mode.(2mA)
- SW,<val> // set interval timer(*0.625ms) 0000-7FFF
-
-Deep sleep Idle (3.1.2)
- In this mode the module shuts down completly and only draws about 300uA. To enable this set the most signifant bit(0x8000) of Sniff interaval timer.
- SW,8320 // deep sleep enable(interval=0x320*0.625=500ms)
- In normal sleep the firmware is still running in idle mode, and wakes up about 20 times per second to check ports, update LEDs, etc. During deep sleep, the firmware actually stops runnig some tasks and the LEDs only update about once per second.
- To wake from deep sleep there are three ways: (in worst case wake up takes 5ms)
- *send a charactor to the UART(first charactor will be lost)
- *toggle CTS low to high and wait 5ms
- *wake automatically every slot time(<val>*0.625ms)
- Once the radio is awake it stay active for exactly 1 second of inactivity and then sleeps again.
- Downside: latency and data loss
-
-Disable Output driver Idle or Active (3.1.3)
- S%,1000 // set all GPIO pins(0-11) to inputs.
-
-Lower Transmit Power Idle or Active (3.1.4)
- SY,<hex> // transmit power setting(takes effect after a power cycle and reboot)
- Downside: reducing effective range
-
-
-Optimizig for Latency
----------------------
-By default the firmware is optimized for throughput.
-SQ,16 // set latency bit
-SQ,0 // unset latency bit
-
-
-Configuration timer settings
-----------------------------
-Remote configuration is used for the module to be configured with various commands over Bluetooth(SPP profile only?).
-
-The module has remote configuration timer to allow remote configuration over Bluetooth after power up in Slave mode. In Master modes the remote configuration timer is set to 0(no remote configuration). (In Trigger Master mode the timer is used as an idle timer to break the connection after time expires with no charactors receive.)
- ST,0 // no remote, no local when connected
- ST,<1-252> // local and remote with timeout in seconds from power up
- ST,253 // local only without timeout
- ST,254 // remote only without timeout
- ST,255 // local and remote without timeout
-
-
-Android
--------
-3.7.1.5 Note: To connect with Android phone the modules must wake up 11ms every 2.5seconds.
-
-
-Commands
---------
-SC,
-SM,<val>
-SD,
-SP,<string> Pin code(alpahnumeric)
-SQ,<mask> Special configuration(GPIO, discovery mode, low latency, reboot, UART)
-SR,<hex> Store remote address
-SR,Z Erase all address
-SS,<string> Set service name(1-20)**
-ST,<val> Remote configuration timer(Master:0, Slave:0-255, Triger:as idle timer)
-SU,<val> UART baud rate
-SW,<val> low-power sniff mode** deep sleep and wake up every 625us * <val>
-SX,<0|1> bonding enable only acceps device that matches the stored address
-SY,<hex> power setting**
-SZ,<val> non-standard raw baud rate <val>=baud*0.004096
-S~,<val> Profile 0:SPP, 5:APL, 6:HID
-S-,<string> Device name -15 alphanumeric charactors
-S?,<0|1> role switch enable
-S$,<char> command mode char
-$|,<hex> low-power connect mode deep sleep/active(discoverable and connectable) cycle
-D display basic setting
-E display extended setting
-GB display the device's Bluetooth address
-GF display Bluetooth address of connected device
-GK show connection status
-GR show remote address for reconnecting
-G& show GPIO pin
-G<char> show stored setting
-+ toggle local echo on/off
-& show GPIO 3,4,6,7(DIP switch)
-C connect to stored remote address
-C,<address> connect last address
-CFI connect and go into fast data mode
-CFR connect and go into fast data mode
-CT,<address>,<val> connect to the address and disconnect after val?
-F,1 fast data mod:
-H display help
-I,<time>,<cod> inquiry scan with <cod>
-IN
-IQ scan
-IS inquiry scan with 001F00
-J hide pin code
-K, kill disconnects current connection
-L link quality
-M show modem signlal status
-O display other settings
-P,<car> pass through?
-Q quiet mode make the module not discoverable
-Q,0 discoverable and connectable
-Q,1 not discoverable and not connectable
-Q,2 not discoverable and connectable
-Q,? display current quiet mode
-R,1 reboot
-T,<0|1> pass received data while in command mode
-U,<baud>,<parity> change UART setting tentatively
-V display firmware version
-W wake from quiet mode enable discovery and connection
-Z deep sleep mode(<2mA)
-
-
-
-help
-----
-*** SET COMMANDS ***
-SA,<3,0> - Authentication
-SC,<hex> - Service Class
-SD,<hex> - Device Class
-SE,<1-16> - UUID
-SF,1 - Factory Defaults
-SH,<hex> - HID flags
-SI,<hex> - Inquiry Scan Window
-SJ,<hex> - Page Scan Window
-SL,<E,O,N> - Parity
-SM,<0-5> - Mode (0=slav,1=mstr,2=trig,3=auto,4=DTR,5=Any)
-SN,<name> - Name
-SO,<text> - conn/discon Status
-SP,<text> - Pin Code
-SR,<adr> - Remote Address
-SS,<text> - Service Name
-ST,<num> - Config Timer
-SU,<rate> - Baudrate
-SW,<hex> - Sniff Rate
-SX,<1,0> - Bonding
-SY,<hex> - TX power
-SZ,<num> - Raw Baudrate
-S~,<0-6> - Profile (0=SPP,1=DCE,2=DTE,3=MDM,4=D&S,6=HID
-S?,<0-1> - role switch
-S$,<char> - CMD mode char
-S@,<hex> - io port dir
-S&,<hex> - io port val
-S%,<hex> - io boot dir
-S^,<hex> - io boot val
-S*,<hex> - pio(8-11) set
-S|,<hex> - low power timers
-S+,<num> - DTR timer
-S=,<hex> - Key mapper
-S:,<num> - sleep timer
-*** DISPLAY ***
-D - Basic Settings
-E - Extended Settings
-G<X> - Stored setting
-GB - BT Address
-GF - BT Address of Last Connection
-GK - Connect Status
-G& - I/O Ports
-V - Firmare version
-*** OTHER ***
-C,<adr> - Connect
-F,1 - Fast Mode
-I,<time>,<cod> - Device Scan Inquiry
-J - Hide Pin Code
-K, - Kill (disconnect)
-L, - toggle local echo
-P,<text> - Pass Thru
-Q - Quiet (no discovery)
-R,1 - Reboot
-T,<0,1> - send data in CMD mode
-U,<rate>,<E,O,N> - Temp Uart Change
-Z - low power sleep
-& - Read switches
diff --git a/keyboard/hhkb_rn42/hhkb_avr.h b/keyboard/hhkb_rn42/hhkb_avr.h
deleted file mode 100644
index f007d7667a..0000000000
--- a/keyboard/hhkb_rn42/hhkb_avr.h
+++ /dev/null
@@ -1,164 +0,0 @@
-#ifndef HHKB_AVR_H
-#define HHKB_AVR_H
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-
-
-// Timer resolution check
-#if (1000000/TIMER_RAW_FREQ > 20)
-# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
-#endif
-
-
-/*
- * HHKB Matrix I/O
- *
- * row: HC4051[A,B,C] selects scan row0-7
- * row-ext: [En0,En1] row extention for JP
- * col: LS145[A,B,C,D] selects scan col0-7 and enable(D)
- * key: on: 0/off: 1
- * prev: hysteresis control: assert(1) when previous key state is on
- */
-
-
-#if defined(__AVR_ATmega32U4__)
-/*
- * For TMK HHKB alt controller(ATMega32U4)
- *
- * row: PB0-2
- * col: PB3-5,6
- * key: PD7(pull-uped)
- * prev: PB7
- * power: PD4(L:off/H:on)
- * row-ext: PC6,7 for HHKB JP(active low)
- */
-static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); }
-static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); }
-static inline bool KEY_STATE(void) { return (PIND & (1<<7)); }
-static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); }
-static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); }
-#ifdef HHKB_POWER_SAVING
-static inline void KEY_POWER_ON(void) {
- DDRB = 0xFF; PORTB = 0x40; // change pins output
- DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on
- /* Without this wait you will miss or get false key events. */
- _delay_ms(5); // wait for powering up
-}
-static inline void KEY_POWER_OFF(void) {
- /* input with pull-up consumes less than without it when pin is open. */
- DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up
- DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off
-}
-#else
-static inline void KEY_POWER_ON(void) {}
-static inline void KEY_POWER_OFF(void) {}
-#endif
-static inline void KEY_INIT(void)
-{
- /* row,col,prev: output */
- DDRB = 0xFF;
- PORTB = 0x40; // unable
- /* key: input with pull-up */
- DDRD &= ~0x80;
- PORTD |= 0x80;
-#ifdef HHKB_JP
- /* row extention for HHKB JP */
- DDRC |= (1<<6|1<<7);
- PORTC |= (1<<6|1<<7);
-#endif
- KEY_UNABLE();
- KEY_PREV_OFF();
-
- KEY_POWER_ON();
-}
-static inline void KEY_SELECT(uint8_t ROW, uint8_t COL)
-{
- PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07);
-#ifdef HHKB_JP
- if ((ROW) & 0x08) PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<6);
- else PORTC = (PORTC & ~(1<<6|1<<7)) | (1<<7);
-#endif
-}
-
-
-#elif defined(__AVR_AT90USB1286__)
-/*
- * For Teensy++(AT90USB1286)
- *
- * HHKB pro HHKB pro2
- * row: PB0-2 (6-8) (5-7)
- * col: PB3-5,6 (9-12) (8-11)
- * key: PE6(pull-uped) (4) (3)
- * prev: PE7 (5) (4)
- *
- * TODO: convert into 'staitc inline' function
- */
-#define KEY_INIT() do { \
- DDRB |= 0x7F; \
- DDRE |= (1<<7); \
- DDRE &= ~(1<<6); \
- PORTE |= (1<<6); \
-} while (0)
-#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
- ((ROW) & 0x07))
-#define KEY_ENABLE() (PORTB &= ~(1<<6))
-#define KEY_UNABLE() (PORTB |= (1<<6))
-#define KEY_STATE() (PINE & (1<<6))
-#define KEY_PREV_ON() (PORTE |= (1<<7))
-#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
-#define KEY_POWER_ON()
-#define KEY_POWER_OFF()
-
-
-#else
-# error "define code for matrix scan"
-#endif
-
-
-#if 0
-// For ATMega328P with V-USB
-//
-// #elif defined(__AVR_ATmega328P__)
-// Ports for V-USB
-// key: PB0(pull-uped)
-// prev: PB1
-// row: PB2-4
-// col: PC0-2,3
-// power: PB5(Low:on/Hi-z:off)
-#define KEY_INIT() do { \
- DDRB |= 0x3E; \
- DDRB &= ~(1<<0); \
- PORTB |= 1<<0; \
- DDRC |= 0x0F; \
- KEY_UNABLE(); \
- KEY_PREV_OFF(); \
-} while (0)
-#define KEY_SELECT(ROW, COL) do { \
- PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
- PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \
-} while (0)
-#define KEY_ENABLE() (PORTC &= ~(1<<3))
-#define KEY_UNABLE() (PORTC |= (1<<3))
-#define KEY_STATE() (PINB & (1<<0))
-#define KEY_PREV_ON() (PORTB |= (1<<1))
-#define KEY_PREV_OFF() (PORTB &= ~(1<<1))
-// Power supply switching
-#define KEY_POWER_ON() do { \
- KEY_INIT(); \
- PORTB &= ~(1<<5); \
- _delay_ms(1); \
-} while (0)
-#define KEY_POWER_OFF() do { \
- DDRB &= ~0x3F; \
- PORTB &= ~0x3F; \
- DDRC &= ~0x0F; \
- PORTC &= ~0x0F; \
-} while (0)
-#endif
-
-#endif
diff --git a/keyboard/hhkb_rn42/keymap_common.h b/keyboard/hhkb_rn42/keymap_common.h
deleted file mode 100644
index 3622665f3a..0000000000
--- a/keyboard/hhkb_rn42/keymap_common.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_code.h"
-#include "action_layer.h"
-#include "action_macro.h"
-#include "action_util.h"
-#include "report.h"
-#include "host.h"
-#include "print.h"
-#include "debug.h"
-#include "keymap.h"
-
-
-extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
-extern const uint16_t fn_actions[];
-
-
-#define KEYMAP( \
- K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \
- K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \
- K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \
- K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \
- K35, K36, K37, K57, K56 \
-) \
-{ \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
- { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
- { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
- { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \
-}
-
-
-#define KEYMAP_JP( \
- K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \
- K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \
- K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \
- K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \
- K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4 \
-) \
-{ \
- { KC_NO, KC_NO, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \
- { KC_NO, KC_NO, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
- { KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
- { KC_NO, KC_NO, KC_##K32, KC_NO, KC_##K34, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_NO, KC_##K55, KC_##K56, KC_NO }, \
- { KC_NO, KC_NO, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
- { KC_NO, KC_NO, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO }, \
- { KC_NO, KC_NO, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO }, \
- { KC_NO, KC_NO, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO }, \
- { KC_NO, KC_NO, KC_##KA2, KC_##KA3, KC_NO, KC_##KA5, KC_##KA6, KC_NO }, \
- { KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO }, \
- { KC_NO, KC_NO, KC_##KC2, KC_NO, KC_##KC4, KC_##KC5, KC_##KC6, KC_NO }, \
- { KC_NO, KC_NO, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO }, \
- { KC_NO, KC_NO, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO }, \
- { KC_NO, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO } \
-}
-
-#endif
diff --git a/keyboard/hhkb_rn42/keymap_hasu.c b/keyboard/hhkb_rn42/keymap_hasu.c
deleted file mode 100644
index 7b93789082..0000000000
--- a/keyboard/hhkb_rn42/keymap_hasu.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * Hasu: my personal keymap
- */
-#include "keymap_common.h"
-
-
-#ifdef KEYMAP_SECTION_ENABLE
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
-#else
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-#endif
- /* Layer 0: Default Layer
- * ,-----------------------------------------------------------.
- * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
- * |-----------------------------------------------------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
- * |-----------------------------------------------------------|
- * |Contro| A| S| D| F| G| H| J| K| L|Fn3| '|Fn6 |
- * |-----------------------------------------------------------|
- * |Fn7 | Z| X| C| V| B| N| M| ,| .|Fn2|Shift |Fn1|
- * `-----------------------------------------------------------'
- * |Gui|Alt | Fn4 |Fn5 |Gui|
- * `-------------------------------------------'
- */
- [0] = \
- KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSPC, \
- LCTL,A, S, D, F, G, H, J, K, L, FN3, QUOT,FN6, \
- FN7, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,FN1, \
- LGUI,LALT, FN4, FN5, RGUI),
-
- /* Layer 1: HHKB mode[HHKB Fn]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
- * |-----------------------------------------------------------|
- * |Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
- * |-----------------------------------------------------------|
- * |Shift | | | | | | +| -|End|PgD|Dow|Shift | |
- * `-----------------------------------------------------------'
- * |Gui|Alt | Space |Alt |Gui|
- * `-------------------------------------------'
- */
- [1] = \
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS, UP, NO, BSPC, \
- LCTL,VOLD,VOLU,MUTE,NO, NO, PAST,PSLS,HOME,PGUP,LEFT,RGHT,ENT, \
- LSFT,NO, NO, NO, NO, NO, PPLS,PMNS,END, PGDN,DOWN,RSFT,TRNS, \
- LGUI,LALT, SPC, RALT,RGUI),
-
- /* Layer 2: Vi mode[Slash]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab |Hom|PgD|Up |PgU|End|Hom|PgD|PgUlEnd| | | |Backs|
- * |-----------------------------------------------------------|
- * |Contro| |Lef|Dow|Rig| |Lef|Dow|Up |Rig| | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | | |Hom|PgD|PgUlEnd|Fn0|Shift | |
- * `-----------------------------------------------------------'
- * |Gui|Alt | Space |Alt |Gui|
- * `-------------------------------------------'
- */
- [2] = \
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, \
- LCTL,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, \
- LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, TRNS,RSFT,NO, \
- LGUI,LALT, SPC, RALT,RGUI),
-
- /* Layer 3: Mouse mode(IJKL)[Semicolon]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
- * |-----------------------------------------------------------|
- * |Contro| | | | | |Mb2|McL|McD|McR|Fn | |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Mb1 |Fn |Fn |
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8
- */
- [3] = \
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, LEFT,WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
- LCTL,ACL0,ACL1,ACL2,ACL2,NO, NO, MS_L,MS_D,MS_R,TRNS,NO, ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
- LGUI,LALT, BTN1, TRNS,TRNS),
-
- /* Layer 5: Mouse mode(IJKL)[Space]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab | | | | | |MwL|MwD|McU|MwU|MwR|Wbk|Wfr|Alt-T|
- * |-----------------------------------------------------------|
- * |Contro| | | | | |Mb2|McL|McD|McR|Mb1| |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Mb1 |Fn |Fn |
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel8
- */
- [4] = \
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, LEFT,WH_D,MS_U,WH_U,RGHT,FN9, FN10,FN8, \
- LCTL,VOLD,VOLU,MUTE,NO, NO, NO, MS_L,MS_D,MS_R,BTN1,NO, ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
- LGUI,LALT, TRNS, TRNS,TRNS),
-
-#if 0
- /* Layer 3: Mouse mode(HJKL)[Semicolon]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab | | | | | |MwL|MwD|MwU|MwR| | | |Backs|
- * |-----------------------------------------------------------|
- * |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Mb1 |Alt |Fn0|
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
- */
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- TAB, NO, NO, NO, NO, NO, LEFT,WH_D,WH_U,RGHT,NO, NO, NO, BSPC, \
- LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,TRNS,QUOT,ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,SLSH,RSFT,NO, \
- LGUI,LALT, BTN1, RALT,TRNS),
-
- /* Layer4: Mouse mode(HJKL)[Space]
- * ,-----------------------------------------------------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Tab | | | | | |MwL|MwD|MwU|MwR| |Wbk|Wfr|Alt-T|
- * |-----------------------------------------------------------|
- * |Contro| | | | | |McL|McD|McU|McR|Fn0| |Return |
- * |-----------------------------------------------------------|
- * |Shift | | | | |Mb3|Mb2|Mb1|Mb4|Mb5| |Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Fn0 |Alt |Fn0|
- * `--------------------------------------------'
- * Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
- */
- KEYMAP(GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- FN8, NO, NO, NO, NO, NO, LEFT,WH_D,WH_U,RGHT,NO, FN9, FN10,FN8, \
- LCTL,NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,BTN1,NO, ENT, \
- LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,FN9, FN10,NO, RSFT,NO, \
- LGUI,LALT, TRNS, RALT,RGUI),
-#endif
-#if 0
- /* Layer x: Matias half-qwerty keyboard style[Space]
- * ,-----------------------------------------------------------.
- * | -| 0| 9| 8| 7| 6| 5| 4| 3| 2| 1| | | |Esc|
- * |-----------------------------------------------------------|
- * |Backs| P| O| I| U| Y| T| R| E| W| Q| | |Tab |
- * |-----------------------------------------------------------|
- * |Contro| ;| L| K| J| H| G| F| D| S| A|Con|Control |
- * |-----------------------------------------------------------|
- * |Shift | /| .| ,| M| N| B| V| C| X| Z|Shift | |
- * `-----------------------------------------------------------'
- * |Gui |Alt | Fn0 |Alt |Gui|
- * `--------------------------------------------'
- */
- KEYMAP(MINS,0, 9, 8, 7, 6, 5, 4, 3, 2, 1, NO, NO, NO, ESC, \
- BSPC,P, O, I, U, Y, T, R, E, W, Q, NO, NO, TAB, \
- LCTL,SCLN,L, K, J, H, G, F, D, S, A, RCTL,RCTL, \
- LSFT,SLSH,DOT, COMM,M, N, B, V, C, X, Z, RSFT,NO, \
- LGUI,LALT, TRNS, RALT,RGUI),
-#endif
-};
-
-
-
-/* id for user defined functions */
-enum function_id {
- LSHIFT_LPAREN,
-};
-
-enum macro_id {
- HELLO,
- VOLUP,
- ALT_TAB,
-};
-
-
-/*
- * Fn action definition
- */
-#ifdef KEYMAP_SECTION_ENABLE
-const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
-#else
-const uint16_t fn_actions[] PROGMEM = {
-#endif
- [0] = ACTION_DEFAULT_LAYER_SET(0), // Default layer(not used)
- [1] = ACTION_LAYER_TAP_TOGGLE(1), // HHKB layer(toggle with 5 taps)
- [2] = ACTION_LAYER_TAP_KEY(2, KC_SLASH), // Cursor layer with Slash*
- [3] = ACTION_LAYER_TAP_KEY(3, KC_SCLN), // Mousekey layer with Semicolon*
- [4] = ACTION_LAYER_TAP_KEY(4, KC_SPC), // Mousekey layer with Space
- [5] = ACTION_LAYER_MOMENTARY(4), // Mousekey layer(IJKL)
- [6] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENT), // RControl with tap Enter
- [7] = ACTION_MODS_ONESHOT(MOD_LSFT), // Oneshot Shift
- [8] = ACTION_MACRO(ALT_TAB), // Application switching
- [9] = ACTION_MODS_KEY(MOD_LALT, KC_LEFT),
- [10] = ACTION_MODS_KEY(MOD_LALT, KC_RIGHT),
-
-// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_BSPC), // LControl with tap Backspace
-// [x] = ACTION_LMOD_TAP_KEY(KC_LCTL, KC_ESC), // LControl with tap Esc
-// [x] = ACTION_FUNCTION_TAP(LSHIFT_LPAREN), // Function: LShift with tap '('
-// [x] = ACTION_MACRO(HELLO), // Macro: say hello
-// [x] = ACTION_MACRO(VOLUP), // Macro: media key
-};
-
-
-/*
- * Macro definition
- */
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- switch (id) {
- case HELLO:
- return (record->event.pressed ?
- MACRO( I(0), T(H), T(E), T(L), T(L), W(255), T(O), END ) :
- MACRO_NONE );
- case VOLUP:
- return (record->event.pressed ?
- MACRO( D(VOLU), U(VOLU), END ) :
- MACRO_NONE );
- case ALT_TAB:
- return (record->event.pressed ?
- MACRO( D(LALT), D(TAB), END ) :
- MACRO( U(TAB), END ));
- }
- return MACRO_NONE;
-}
-
-
-
-/*
- * user defined action function
- */
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- if (record->event.pressed) dprint("P"); else dprint("R");
- dprintf("%d", record->tap.count);
- if (record->tap.interrupted) dprint("i");
- dprint("\n");
-
- switch (id) {
- case LSHIFT_LPAREN:
- // Shift parentheses example: LShft + tap '('
- // http://stevelosh.com/blog/2012/10/a-modern-space-cadet/#shift-parentheses
- // http://geekhack.org/index.php?topic=41989.msg1304899#msg1304899
- if (record->event.pressed) {
- if (record->tap.count > 0 && !record->tap.interrupted) {
- if (record->tap.interrupted) {
- dprint("tap interrupted\n");
- register_mods(MOD_BIT(KC_LSHIFT));
- }
- } else {
- register_mods(MOD_BIT(KC_LSHIFT));
- }
- } else {
- if (record->tap.count > 0 && !(record->tap.interrupted)) {
- add_weak_mods(MOD_BIT(KC_LSHIFT));
- send_keyboard_report();
- register_code(KC_9);
- unregister_code(KC_9);
- del_weak_mods(MOD_BIT(KC_LSHIFT));
- send_keyboard_report();
- record->tap.count = 0; // ad hoc: cancel tap
- } else {
- unregister_mods(MOD_BIT(KC_LSHIFT));
- }
- }
- break;
- }
-}
diff --git a/keyboard/hhkb_rn42/keymap_jp.c b/keyboard/hhkb_rn42/keymap_jp.c
deleted file mode 100644
index 48d0ee70ba..0000000000
--- a/keyboard/hhkb_rn42/keymap_jp.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * HHKB JP Layout
- */
-#include "keymap_common.h"
-
-
-#ifdef KEYMAP_SECTION_ENABLE
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
-#else
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-#endif
- /* Layer 0: Default Layer */
- KEYMAP_JP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, \
- LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS,ENT, \
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, UP, RSFT, \
- FN0, ZKHK,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,FN0, LEFT,DOWN,RGHT),
-
- /* Layer 1: HHKB mode (HHKB Fn)
- * ,-----------------------------------------------------------.
- * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
- * |-----------------------------------------------------------|
- * |Caps | | | | | | | |Psc|Slk|Pus|Up | | |
- * |------------------------------------------------------` |
- * | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | |
- * |-----------------------------------------------------------|
- * | | | | | | | +| -|End|PgD|Dow| | | |
- * |-----------------------------------------------------------|
- * | || | | | | | | | | || | | |
- * `-----------------------------------------------------------'
- */
- KEYMAP_JP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
- CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, \
- TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,TRNS,PENT, \
- TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PPLS,PMNS,END, PGDN,DOWN,TRNS,TRNS,TRNS, \
- TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS),
-};
-
-
-
-/*
- * Fn action definition
- */
-#ifdef KEYMAP_SECTION_ENABLE
-const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
-#else
-const uint16_t fn_actions[] PROGMEM = {
-#endif
- [0] = ACTION_LAYER_MOMENTARY(1),
-};
diff --git a/keyboard/hhkb_rn42/matrix.c b/keyboard/hhkb_rn42/matrix.c
deleted file mode 100644
index c6c444ff52..0000000000
--- a/keyboard/hhkb_rn42/matrix.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "timer.h"
-#include "matrix.h"
-#include "hhkb_avr.h"
-#include <avr/wdt.h>
-#include "suspend.h"
-#include "lufa.h"
-
-
-// matrix power saving
-#define MATRIX_POWER_SAVE 10000
-static uint32_t matrix_last_modified = 0;
-static bool matrix_power = true;
-
-// matrix state buffer(1:on, 0:off)
-static matrix_row_t *matrix;
-static matrix_row_t *matrix_prev;
-static matrix_row_t _matrix0[MATRIX_ROWS];
-static matrix_row_t _matrix1[MATRIX_ROWS];
-
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-#ifdef DEBUG
- debug_enable = true;
- debug_keyboard = true;
-#endif
-
- KEY_INIT();
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
- for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix1[i] = 0x00;
- matrix = _matrix0;
- matrix_prev = _matrix1;
-}
-
-uint8_t matrix_scan(void)
-{
- uint8_t *tmp;
-
- tmp = matrix_prev;
- matrix_prev = matrix;
- matrix = tmp;
-
- matrix_power_up();
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- for (uint8_t col = 0; col < MATRIX_COLS; col++) {
- KEY_SELECT(row, col);
- _delay_us(5);
-
- // Not sure this is needed. This just emulates HHKB controller's behaviour.
- if (matrix_prev[row] & (1<<col)) {
- KEY_PREV_ON();
- }
- _delay_us(10);
-
- // NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
- // If V-USB interrupts in this section we could lose 40us or so
- // and would read invalid value from KEY_STATE.
- uint8_t last = TIMER_RAW;
-
- KEY_ENABLE();
-
- // Wait for KEY_STATE outputs its value.
- // 1us was ok on one HHKB, but not worked on another.
- // no wait doesn't work on Teensy++ with pro(1us works)
- // no wait does work on tmk PCB(8MHz) with pro2
- // 1us wait does work on both of above
- // 1us wait doesn't work on tmk(16MHz)
- // 5us wait does work on tmk(16MHz)
- // 5us wait does work on tmk(16MHz/2)
- // 5us wait does work on tmk(8MHz)
- // 10us wait does work on Teensy++ with pro
- // 10us wait does work on 328p+iwrap with pro
- // 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
- _delay_us(5);
-
- if (KEY_STATE()) {
- matrix[row] &= ~(1<<col);
- } else {
- matrix[row] |= (1<<col);
- }
-
- // Ignore if this code region execution time elapses more than 20us.
- // MEMO: 20[us] * (TIMER_RAW_FREQ / 1000000)[count per us]
- // MEMO: then change above using this rule: a/(b/c) = a*1/(b/c) = a*(c/b)
- if (TIMER_DIFF_RAW(TIMER_RAW, last) > 20/(1000000/TIMER_RAW_FREQ)) {
- matrix[row] = matrix_prev[row];
- }
-
- _delay_us(5);
- KEY_PREV_OFF();
- KEY_UNABLE();
-
- // NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
- // This takes 25us or more to make sure KEY_STATE returns to idle state.
- _delay_us(75);
- }
- if (matrix[row] ^ matrix_prev[row]) matrix_last_modified = timer_read32();
- }
- matrix_power_down();
- return 1;
-}
-
-bool matrix_is_modified(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix[i] != matrix_prev[i])
- return true;
- }
- return false;
-}
-
-inline
-bool matrix_has_ghost(void)
-{
- return false;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & (1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 01234567\n");
- for (uint8_t row = 0; row < matrix_rows(); row++) {
- xprintf("%02X: %08b\n", row, bitrev(matrix_get_row(row)));
- }
-}
-
-void matrix_power_up(void) {
- if (matrix_power) return;
- KEY_POWER_ON();
- matrix_power = true;
-}
-void matrix_power_down(void) {
- if (!matrix_power) return;
- // doesn't power save while USB connection is active
- if (USB_DeviceState == DEVICE_STATE_Configured) return;
- if (timer_elapsed32(matrix_last_modified) <= MATRIX_POWER_SAVE) return;
- KEY_POWER_OFF();
- suspend_power_down(WDTO_15MS);
- matrix_power = false;
-}
diff --git a/keyboard/hhkb_rn42/rn42/rn42_task.c b/keyboard/hhkb_rn42/rn42/rn42_task.c
deleted file mode 100644
index c3359ed506..0000000000
--- a/keyboard/hhkb_rn42/rn42/rn42_task.c
+++ /dev/null
@@ -1,294 +0,0 @@
-#include <stdint.h>
-#include "keycode.h"
-#include "serial.h"
-#include "host.h"
-#include "action.h"
-#include "action_util.h"
-#include "lufa.h"
-#include "rn42_task.h"
-#include "print.h"
-#include "debug.h"
-#include "timer.h"
-#include "command.h"
-#include "battery.h"
-
-static bool config_mode = false;
-static bool force_usb = false;
-
-static void status_led(bool on)
-{
- if (on) {
- DDRE |= (1<<6);
- PORTE &= ~(1<<6);
- } else {
- DDRE |= (1<<6);
- PORTE |= (1<<6);
- }
-}
-
-void rn42_task_init(void)
-{
- battery_init();
-}
-
-void rn42_task(void)
-{
- int16_t c;
- if (config_mode) {
- // Config mode: print output from RN-42
- while ((c = serial_recv2()) != -1) {
- // without flow control it'll fail to receive data when flooded
- xprintf("%c", c);
- }
- } else {
- // Raw mode: interpret output report of LED state
- while ((c = serial_recv2()) != -1) {
- // LED Out report: 0xFE, 0x02, 0x01, <leds>
- // To get the report over UART set bit3 with SH, command.
- static enum {LED_INIT, LED_FE, LED_02, LED_01} state = LED_INIT;
- switch (state) {
- case LED_INIT:
- if (c == 0xFE) state = LED_FE;
- else state = LED_INIT;
- break;
- case LED_FE:
- if (c == 0x02) state = LED_02;
- else state = LED_INIT;
- break;
- case LED_02:
- if (c == 0x01) state = LED_01;
- else state = LED_INIT;
- break;
- case LED_01:
- dprintf("LED status: %02X\n", c);
- rn42_set_leds(c);
- state = LED_INIT;
- break;
- default:
- state = LED_INIT;
- }
- }
- }
-
- /* Bluetooth mode when ready */
- if (!config_mode && !force_usb) {
- if (!rn42_rts() && host_get_driver() != &rn42_driver) {
- clear_keyboard();
- host_set_driver(&rn42_driver);
- } else if (rn42_rts() && host_get_driver() != &lufa_driver) {
- clear_keyboard();
- host_set_driver(&lufa_driver);
- }
- }
-
-
- static uint16_t prev_timer = 0;
- uint16_t e = timer_elapsed(prev_timer);
- if (e > 1000) {
- /* every second */
- prev_timer += e/1000*1000;
-
- /* Low voltage alert */
- uint8_t bs = battery_status();
- if (bs == LOW_VOLTAGE) {
- battery_led(LED_ON);
- } else {
- battery_led(LED_CHARGER);
- }
-
- static uint8_t prev_status = UNKNOWN;
- if (bs != prev_status) {
- prev_status = bs;
- switch (bs) {
- case FULL_CHARGED: xprintf("FULL_CHARGED\n"); break;
- case CHARGING: xprintf("CHARGING\n"); break;
- case DISCHARGING: xprintf("DISCHARGING\n"); break;
- case LOW_VOLTAGE: xprintf("LOW_VOLTAGE\n"); break;
- default: xprintf("UNKNOWN STATUS\n"); break;
- };
- }
-
- /* every minute */
- uint32_t t = timer_read32()/1000;
- if (t%60 == 0) {
- uint16_t v = battery_voltage();
- uint8_t h = t/3600;
- uint8_t m = t%3600/60;
- uint8_t s = t%60;
- xprintf("%02u:%02u:%02u\t%umV\n", h, m, s, v);
- /* TODO: xprintf doesn't work for this.
- xprintf("%02u:%02u:%02u\t%umV\n", (t/3600), (t%3600/60), (t%60), v);
- */
- }
- }
-
-
- /* Connection monitor */
- if (rn42_linked()) {
- status_led(true);
- } else {
- status_led(false);
- }
-}
-
-
-
-/******************************************************************************
- * Command
- ******************************************************************************/
-bool command_extra(uint8_t code)
-{
- uint32_t t;
- uint16_t b;
- static host_driver_t *prev_driver = &rn42_driver;
- switch (code) {
- case KC_H:
- case KC_SLASH: /* ? */
- print("\n\n----- Bluetooth RN-42 Help -----\n");
- print("Del: enter/exit config mode(auto_connect/disconnect)\n");
- print("i: RN-42 info\n");
- print("b: battery voltage\n");
-
- if (config_mode) {
- return true;
- } else {
- print("u: Force USB mode\n");
- return false; // to display default command help
- }
- case KC_DELETE:
- if (rn42_autoconnecting()) {
- prev_driver = host_get_driver();
- clear_keyboard();
- _delay_ms(500);
- host_set_driver(&rn42_config_driver); // null driver; not to send a key to host
- rn42_disconnect();
- print("\nRN-42: disconnect\n");
- print("Enter config mode\n");
- print("type $$$ to start and + for local echo\n");
- command_state = CONSOLE;
- config_mode = true;
- } else {
- rn42_autoconnect();
- print("\nRN-42: auto_connect\n");
- print("Exit config mode\n");
- command_state = ONESHOT;
- config_mode = false;
- //clear_keyboard();
- host_set_driver(prev_driver);
- }
- return true;
- case KC_U:
- if (config_mode) return false;
- if (force_usb) {
- print("Auto mode\n");
- force_usb = false;
- } else {
- print("USB mode\n");
- force_usb = true;
- clear_keyboard();
- host_set_driver(&lufa_driver);
- }
- return true;
- case KC_I:
- print("\n----- RN-42 info -----\n");
- xprintf("protocol: %s\n", (host_get_driver() == &rn42_driver) ? "RN-42" : "LUFA");
- xprintf("force_usb: %X\n", force_usb);
- xprintf("rn42_autoconnecting(): %X\n", rn42_autoconnecting());
- xprintf("rn42_linked(): %X\n", rn42_linked());
- xprintf("rn42_rts(): %X\n", rn42_rts());
- xprintf("config_mode: %X\n", config_mode);
- xprintf("VBUS: %X\n", USBSTA&(1<<VBUS));
- xprintf("battery_charging: %X\n", battery_charging());
- xprintf("battery_status: %X\n", battery_status());
- return true;
- case KC_B:
- // battery monitor
- t = timer_read32()/1000;
- b = battery_voltage();
- xprintf("BAT: %umV\t", b);
- xprintf("%02u:", t/3600);
- xprintf("%02u:", t%3600/60);
- xprintf("%02u\n", t%60);
- return true;
- default:
- if (config_mode)
- return true;
- else
- return false; // exec default command
- }
- return true;
-}
-
-static uint8_t code2asc(uint8_t code);
-bool command_console_extra(uint8_t code)
-{
- switch (code) {
- default:
- rn42_putc(code2asc(code));
- return true;
- }
- return false;
-}
-
-// convert keycode into ascii charactor
-static uint8_t code2asc(uint8_t code)
-{
- bool shifted = (get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))) ? true : false;
- switch (code) {
- case KC_A: return (shifted ? 'A' : 'a');
- case KC_B: return (shifted ? 'B' : 'b');
- case KC_C: return (shifted ? 'C' : 'c');
- case KC_D: return (shifted ? 'D' : 'd');
- case KC_E: return (shifted ? 'E' : 'e');
- case KC_F: return (shifted ? 'F' : 'f');
- case KC_G: return (shifted ? 'G' : 'g');
- case KC_H: return (shifted ? 'H' : 'h');
- case KC_I: return (shifted ? 'I' : 'i');
- case KC_J: return (shifted ? 'J' : 'j');
- case KC_K: return (shifted ? 'K' : 'k');
- case KC_L: return (shifted ? 'L' : 'l');
- case KC_M: return (shifted ? 'M' : 'm');
- case KC_N: return (shifted ? 'N' : 'n');
- case KC_O: return (shifted ? 'O' : 'o');
- case KC_P: return (shifted ? 'P' : 'p');
- case KC_Q: return (shifted ? 'Q' : 'q');
- case KC_R: return (shifted ? 'R' : 'r');
- case KC_S: return (shifted ? 'S' : 's');
- case KC_T: return (shifted ? 'T' : 't');
- case KC_U: return (shifted ? 'U' : 'u');
- case KC_V: return (shifted ? 'V' : 'v');
- case KC_W: return (shifted ? 'W' : 'w');
- case KC_X: return (shifted ? 'X' : 'x');
- case KC_Y: return (shifted ? 'Y' : 'y');
- case KC_Z: return (shifted ? 'Z' : 'z');
- case KC_1: return (shifted ? '!' : '1');
- case KC_2: return (shifted ? '@' : '2');
- case KC_3: return (shifted ? '#' : '3');
- case KC_4: return (shifted ? '$' : '4');
- case KC_5: return (shifted ? '%' : '5');
- case KC_6: return (shifted ? '^' : '6');
- case KC_7: return (shifted ? '&' : '7');
- case KC_8: return (shifted ? '*' : '8');
- case KC_9: return (shifted ? '(' : '9');
- case KC_0: return (shifted ? ')' : '0');
- case KC_ENTER: return '\n';
- case KC_ESCAPE: return 0x1B;
- case KC_BSPACE: return '\b';
- case KC_TAB: return '\t';
- case KC_SPACE: return ' ';
- case KC_MINUS: return (shifted ? '_' : '-');
- case KC_EQUAL: return (shifted ? '+' : '=');
- case KC_LBRACKET: return (shifted ? '{' : '[');
- case KC_RBRACKET: return (shifted ? '}' : ']');
- case KC_BSLASH: return (shifted ? '|' : '\\');
- case KC_NONUS_HASH: return (shifted ? '|' : '\\');
- case KC_SCOLON: return (shifted ? ':' : ';');
- case KC_QUOTE: return (shifted ? '"' : '\'');
- case KC_GRAVE: return (shifted ? '~' : '`');
- case KC_COMMA: return (shifted ? '<' : ',');
- case KC_DOT: return (shifted ? '>' : '.');
- case KC_SLASH: return (shifted ? '?' : '/');
- case KC_DELETE: return '\0'; // Delete to disconnect
- default: return ' ';
- }
-}
diff --git a/keyboard/infinity/Makefile b/keyboard/infinity/Makefile
index 758296f335..e33c239afb 100644
--- a/keyboard/infinity/Makefile
+++ b/keyboard/infinity/Makefile
@@ -12,11 +12,16 @@ OBJDIR = ./build
OBJECTS = \
$(OBJDIR)/matrix.o \
- $(OBJDIR)/keymap.o \
$(OBJDIR)/keymap_common.o \
$(OBJDIR)/led.o \
$(OBJDIR)/main.o
+ifdef KEYMAP
+ OBJECTS := $(OBJDIR)/keymap_$(KEYMAP).o $(OBJECTS)
+else
+ OBJECTS := $(OBJDIR)/keymap.o $(OBJECTS)
+endif
+
CONFIG_H = config.h
INCLUDE_PATHS = -I.
diff --git a/keyboard/infinity/config.h b/keyboard/infinity/config.h
index 28f2ca0293..dc734dbdbe 100644
--- a/keyboard/infinity/config.h
+++ b/keyboard/infinity/config.h
@@ -36,4 +36,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* for prototype */
+//#define INFINITY_PROTOTYPE
+
#endif
diff --git a/keyboard/infinity/keymap.c b/keyboard/infinity/keymap.c
index 100142f41c..4726cee653 100644
--- a/keyboard/infinity/keymap.c
+++ b/keyboard/infinity/keymap.c
@@ -20,6 +20,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,ENT, \
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT,FN0, \
NO, LGUI,LALT, SPC, RALT,RGUI,NO, NO),
+
/* Layer 1: HHKB mode (HHKB Fn)
* ,-----------------------------------------------------------.
* |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
@@ -33,7 +34,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
* | |Gui|Alt | Space |Alt |Gui| | |
* `-----------------------------------------------------------'
*/
- [1]=
+ [1] =
KEYMAP(PWR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, \
CAPS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS, UP, TRNS, BSPC, \
TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,PAST,PSLS,HOME,PGUP,LEFT,RGHT,PENT, \
diff --git a/keyboard/infinity/keymap_common.h b/keyboard/infinity/keymap_common.h
index 7a5f778f2d..b0f765bfeb 100644
--- a/keyboard/infinity/keymap_common.h
+++ b/keyboard/infinity/keymap_common.h
@@ -33,9 +33,9 @@ extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
-/* GH60 keymap definition macro
- * K2C, K31 and K3C are extra keys for ISO
- */
+#ifdef INFINITY_PROTOTYPE
+
+/* Infinity prototype */
#define KEYMAP( \
K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K86, \
K51, K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, \
@@ -54,5 +54,27 @@ extern const uint16_t fn_actions[];
{ KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \
}
+#else
+
+/* Infinity production */
+#define KEYMAP( \
+ K00, K10, K20, K30, K40, K50, K60, K70, K80, K01, K11, K21, K31, K41, K51, \
+ K61, K71, K81, K02, K12, K22, K32, K42, K52, K62, K72, K82, K03, K13, \
+ K23, K33, K43, K53, K63, K73, K83, K04, K14, K24, K34, K44, K54, \
+ K64, K74, K84, K05, K15, K25, K35, K45, K55, K65, K75, K85, K06, \
+ K16, K26, K36, K46, K56, K66, K76, K86 \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06 }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16 }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26 }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36 }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46 }, \
+ { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56 }, \
+ { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66 }, \
+ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76 }, \
+ { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86 } \
+}
+
#endif
+#endif
diff --git a/keyboard/hhkb/Makefile.nodebug b/keyboard/nerd/Makefile
index 578ba70c45..5fd382841f 100644
--- a/keyboard/hhkb/Makefile.nodebug
+++ b/keyboard/nerd/Makefile
@@ -39,7 +39,7 @@
#----------------------------------------------------------------------------
# Target file name (without extension).
-TARGET = hhkb_lufa
+TARGET = nerd_lufa
# Directory common source filess exist
TOP_DIR = ../..
@@ -47,25 +47,22 @@ TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC += keymap_common.c \
+# project specific files
+SRC = keymap_common.c \
matrix.c \
- led.c
+ backlight.c
+
+ifdef LAYOUT
+ OPT_DEFS += -DNERD_LAYOUT_$(LAYOUT)
+endif
ifdef KEYMAP
- SRC := keymap_$(KEYMAP).c $(SRC)
-else
- SRC := keymap_hasu.c $(SRC)
+ SRC := keymap_$(LAYOUT)_$(KEYMAP).c $(SRC)
endif
CONFIG_H = config.h
-
# MCU name
-# PJRC Teensy++ 2.0
-#MCU = at90usb1286
-# TMK Alt Controller or PJRC Teensy 2.0
MCU = atmega32u4
# Processor frequency.
@@ -79,8 +76,7 @@ MCU = atmega32u4
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
-F_CPU = 16000000
-
+F_CPU = 8000000
#
# LUFA specific
@@ -101,30 +97,25 @@ ARCH = AVR8
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
-# Interrupt driven control endpoint task
-#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
-# Atmel DFU loader 4096 (TMK Alt Controller)
+# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-#CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # USB Nkey Rollover
-KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
-
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# Search Path
VPATH += $(TARGET_DIR)
@@ -133,9 +124,3 @@ VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
-
-debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
-debug-on: all
-
-debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
-debug-off: all
diff --git a/keyboard/nerd/README.md b/keyboard/nerd/README.md
new file mode 100644
index 0000000000..5b4acd3ba9
--- /dev/null
+++ b/keyboard/nerd/README.md
@@ -0,0 +1,52 @@
+NerD keyboard firmware
+========================
+
+Korean Keyboard designed by GON.
+
+*Note that this is not the official firmware*
+
+
+Hardware revision
+-----------------
+
+This firmware was developed and tested for NerD pcb version 1.61 and 2.0.
+
+
+Supported features
+------------------
+
+* All layout options are supported
+* All leds are supported
+* 60% and 80% (TKL) pcbs are supported
+
+
+Changing Bootloader
+-------------------
+
+You can't simply just upload this firmware to a new NerD board because the original
+bootloader won't accept DFU connections.
+
+You can change the bootloader of the keyboard with an ISP programmer of your choice.
+The bootloader pins are easy to access on the NerD pcb.
+
+*Be aware that after changing the bootloader the official configuration software
+won't work anymore and you'll lose your warrenty. GON won't provide any support for this firmware.*
+
+
+Build
+-----
+
+For building you have to specify two build-options, LAYOUT and KEYMAP. The layout option defines
+pcb layout and can be either 60% or 80% at the momemnt. The keymap option selects your
+preferred keymapping.
+
+Move to this directory then just run `make LAYOUT=60 KEYMAP=ansi150`
+
+to compile a firmware for a 60% pcb with ANSI 150 key mapping.
+
+
+Jump to Bootloader
+------------------
+
+You can jump to bootloader by software if you have a macro defined for this in your keymap. The
+default command is (LSFT+RSFT+PAUS) to access the bootloader by software jump.
diff --git a/keyboard/nerd/backlight.c b/keyboard/nerd/backlight.c
new file mode 100644
index 0000000000..2dc85c7532
--- /dev/null
+++ b/keyboard/nerd/backlight.c
@@ -0,0 +1,81 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/io.h>
+#include "backlight.h"
+#include "led.h"
+
+void backlight_init_ports()
+{
+ DDRB |= 0b11100000; // PB7 (switch), PB6 (pcb), PB5 (caps)
+}
+
+void led_set(uint8_t usb_led)
+{
+ (usb_led & (1<<USB_LED_CAPS_LOCK)) ? backlight_caps_enable() : backlight_caps_disable();
+}
+
+void backlight_set(uint8_t level)
+{
+ (level & BACKLIGHT_SWITCH) ? backlight_switch_enable() : backlight_switch_disable();
+ (level & BACKLIGHT_PCB) ? backlight_pcb_enable() : backlight_pcb_disable();
+}
+
+void backlight_switch_enable()
+{
+ PORTB |= 0b10000000;
+}
+
+void backlight_switch_disable()
+{
+ PORTB &= ~0b10000000;
+}
+
+void backlight_switch_invert()
+{
+ PORTB ^= 0b10000000;
+}
+
+void backlight_pcb_enable()
+{
+ PORTB |= 0b01000000;
+}
+
+void backlight_pcb_disable()
+{
+ PORTB &= ~0b01000000;
+}
+
+void backlight_pcb_invert()
+{
+ PORTB ^= 0b01000000;
+}
+
+void backlight_caps_enable()
+{
+ PORTB |= 0b00100000;
+}
+
+void backlight_caps_disable()
+{
+ PORTB &= ~0b00100000;
+}
+
+void backlight_caps_invert()
+{
+ PORTB ^= 0b00100000;
+}
diff --git a/keyboard/nerd/backlight.h b/keyboard/nerd/backlight.h
new file mode 100644
index 0000000000..4c75d9db65
--- /dev/null
+++ b/keyboard/nerd/backlight.h
@@ -0,0 +1,40 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef BACKLIGHT_H
+#define BACKLIGHT_H
+
+enum backlight_level {
+ BACKLIGHT_SWITCH = 0b0000001,
+ BACKLIGHT_PCB = 0b0000010,
+};
+
+void backlight_init_ports(void);
+
+void backlight_switch_invert(void);
+void backlight_switch_enable(void);
+void backlight_switch_disable(void);
+
+void backlight_pcb_invert(void);
+void backlight_pcb_enable(void);
+void backlight_pcb_disable(void);
+
+void backlight_caps_invert(void);
+void backlight_caps_enable(void);
+void backlight_caps_disable(void);
+
+#endif // BACKLIGHT_H
diff --git a/keyboard/nerd/config.h b/keyboard/nerd/config.h
new file mode 100644
index 0000000000..ac2e6989d6
--- /dev/null
+++ b/keyboard/nerd/config.h
@@ -0,0 +1,49 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER GON
+#define PRODUCT NerD
+#define DESCRIPTION t.m.k. keyboard firmware for NerD
+
+/* key matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 10
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 2
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
diff --git a/keyboard/nerd/keymap_60_ansi150.c b/keyboard/nerd/keymap_60_ansi150.c
new file mode 100644
index 0000000000..f85836ab55
--- /dev/null
+++ b/keyboard/nerd/keymap_60_ansi150.c
@@ -0,0 +1,30 @@
+#include "keymap_common.h"
+#include "backlight.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default */
+ KEYMAP_ANSI150(GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, \
+ ESC, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, \
+ LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, \
+ LCTL,LGUI,LALT, SPC, RALT,FN0 ,RCTL),
+ /* Layer 1: Space Fn */
+ KEYMAP_ANSI150(TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
+ TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS, FN1, TRNS,FN0, TRNS),
+ /* Layer 2: Functions */
+ KEYMAP_ANSI150(SLEP,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, MUTE, \
+ TRNS,BTN1,MS_U,BTN3,PSCR,SLCK,PAUS,HOME,INS, END, MPLY,VOLD,VOLU,FN3, \
+ CAPS,MS_L,MS_D,MS_R,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,MPRV,MNXT, FN2, \
+ UP, TRNS,DEL, TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
+ LEFT,DOWN,RGHT, TRNS, TRNS,TRNS,TRNS)
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(2),
+ [1] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),
+ [2] = ACTION_LAYER_TOGGLE(1),
+ [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_SWITCH)
+};
diff --git a/keyboard/nerd/keymap_80_ansi150.c b/keyboard/nerd/keymap_80_ansi150.c
new file mode 100644
index 0000000000..72a7d83c9b
--- /dev/null
+++ b/keyboard/nerd/keymap_80_ansi150.c
@@ -0,0 +1,33 @@
+#include "keymap_common.h"
+#include "backlight.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Layer 0: Default */
+ KEYMAP_ANSI150(ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, \
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, \
+ LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RSFT, UP, \
+ LCTL,LGUI,LALT, SPC, RALT,FN0, RCTL, LEFT,DOWN,RGHT),
+ /* Layer 1: Space Fn */
+ KEYMAP_ANSI150(TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
+ ESC,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
+ TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
+ TRNS,TRNS,TRNS, FN1, TRNS,FN0, TRNS, TRNS,TRNS,TRNS),
+ /* Layer 2: Functions */
+ KEYMAP_ANSI150(SLEP, MYCM,WSCH,WHOM,MAIL,VOLD,VOLU,MUTE,MSEL,MPLY,MPRV,MNXT,MSTP, TRNS,TRNS,TRNS, \
+ TRNS,TRNS,TRNS,TRNS,END, TRNS,TRNS,TRNS,TRNS,TRNS,HOME,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, \
+ TRNS,BTN1,MS_U,BTN3,PSCR,SLCK,TRNS,TRNS,INS, TRNS,TRNS,TRNS,TRNS,FN3, TRNS,TRNS,TRNS, \
+ CAPS,MS_L,MS_D,MS_R,PGDN,TRNS,LEFT,DOWN,UP ,RGHT,TRNS,TRNS, FN2, \
+ TRNS, TRNS,DEL, TRNS,TRNS,PGUP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, \
+ TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(2),
+ [1] = ACTION_LAYER_TAP_KEY(2, KC_SPACE),
+ [2] = ACTION_LAYER_TOGGLE(1),
+ [3] = ACTION_BACKLIGHT_LEVEL(BACKLIGHT_SWITCH)
+};
diff --git a/keyboard/hhkb_rn42/keymap_common.c b/keyboard/nerd/keymap_common.c
index e938fb6270..29ec4e53ef 100644
--- a/keyboard/hhkb_rn42/keymap_common.c
+++ b/keyboard/nerd/keymap_common.c
@@ -1,5 +1,5 @@
/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -14,12 +14,8 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include "action.h"
-#include <avr/pgmspace.h>
#include "keymap_common.h"
-
/* translates key to keycode */
uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
diff --git a/keyboard/nerd/keymap_common.h b/keyboard/nerd/keymap_common.h
new file mode 100644
index 0000000000..e116635918
--- /dev/null
+++ b/keyboard/nerd/keymap_common.h
@@ -0,0 +1,89 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "host.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+#define KEYMAP( \
+ K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
+ K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
+ K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \
+ K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09 }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19 }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29 }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39 }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49 }, \
+ { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59 }, \
+ { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, KC_##K69 }, \
+ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77, KC_##K78, KC_##K79 }, \
+ { KC_##K80, KC_##K81, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_##K87, KC_##K88, KC_##K89 } \
+}
+
+#ifdef NERD_LAYOUT_60
+ #define KEYMAP_ANSI150( \
+ K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K65, \
+ K07, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, \
+ K06, K05, K78, K70, K73, K74, K75 \
+ ) KEYMAP( \
+ K08, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, \
+ NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, NO, NO, NO, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, NO, NO, NO, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, NO, K65, \
+ K07, NO, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, NO, NO, \
+ K06, K05, K78, K70, NO, K73, K74, K75, NO, NO, NO \
+ )
+#endif
+
+#ifdef NERD_LAYOUT_80
+ #define KEYMAP_ANSI150( \
+ K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
+ K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K65, \
+ K07, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K86, \
+ K06, K05, K78, K70, K73, K74, K75, K76, K77, K87 \
+ ) KEYMAP( \
+ K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
+ K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
+ K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
+ K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, NO, K65, \
+ K07, NO, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, NO, K86, \
+ K06, K05, K78, K70, NO, K73, K74, K75, K76, K77, K87 \
+ )
+#endif
+
+#endif // KEYMAP_COMMON_H
diff --git a/keyboard/nerd/matrix.c b/keyboard/nerd/matrix.c
new file mode 100644
index 0000000000..eb5a9ab4f1
--- /dev/null
+++ b/keyboard/nerd/matrix.c
@@ -0,0 +1,221 @@
+/*
+Copyright 2014 Ralf Schmitt <ralf@bunkertor.net>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "backlight.h"
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint16_t read_inputs(void);
+static void init_inputs(void);
+static void init_outputs(void);
+static void reset_inputs(void);
+static void reset_outputs(void);
+static void select_output(uint8_t col);
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ backlight_init_ports();
+ init_inputs();
+ init_outputs();
+
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ reset_inputs();
+ reset_outputs();
+ select_output(col);
+ _delay_us(3);
+ uint16_t rows = read_inputs();
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = rows & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
+ debouncing = DEBOUNCE;
+ }
+ }
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+static void init_inputs(void)
+{
+ DDRE &= ~0b01000000; // PE6 (Col 0)
+ DDRB &= ~0b00001111; // PB0 (Col 1), PB1 (Col 2), PB2 (Col 3), PB3 (Col 4)
+ DDRF &= ~0b00000001; // PF0 (Col 5)
+ DDRD &= ~0b00100011; // PD0 (Col 6), PD1 (Col 8 TKL), PD5 (Col 7)
+}
+
+static uint16_t read_inputs(void)
+{
+ return (PINE&(1<<6) ? 0 : (1<<0)) | // PE6 (Col 0)
+ (PINB&(1<<0) ? 0 : (1<<1)) | // PB0 (Col 1)
+ (PINB&(1<<1) ? 0 : (1<<2)) | // PB1 (Col 2)
+ (PINB&(1<<2) ? 0 : (1<<3)) | // PB2 (Col 3)
+ (PINB&(1<<3) ? 0 : (1<<4)) | // PB3 (Col 4)
+ (PINF&(1<<0) ? 0 : (1<<5)) | // PF0 (Col 5)
+ (PIND&(1<<0) ? 0 : (1<<6)) | // PD0 (Col 6)
+ (PIND&(1<<5) ? 0 : (1<<7)) | // PD5 (Col 7)
+ (PIND&(1<<1) ? 0 : (1<<8)); // PD1 (Col 8 TKL)
+}
+
+static void reset_inputs(void)
+{
+ PORTE |= 0b01000000; // PE6 (Col 0)
+ PORTB |= 0b00001111; // PB0 (Col 1), PB1 (Col 2), PB2 (Col 3), PB3 (Col 4)
+ PORTF |= 0b00000001; // PF0 (Col 5)
+ PORTD |= 0b00100011; // PD0 (Col 6), PD1 (Col 8 TKL), PD5 (Col 7)
+}
+
+static void init_outputs(void)
+{
+ DDRB |= 0b00010000; // PB4 (Row 0)
+ DDRE |= 0b00000100; // PE2 (Row 1)
+ DDRF |= 0b11110010; // PF4 (Row 2), PF7 (Row 3), PF1 (Row 4), PF6 (Row 5), PF5 (Row 7)
+ DDRC |= 0b11000000; // PC6 (Row 6), PC7 (Row 9)
+ DDRD |= 0b10000000; // PD7 (Row 8)
+}
+
+static void reset_outputs(void)
+{
+ PORTB |= 0b00010000; // PB4 (Row 0)
+ PORTE |= 0b00000100; // PE2 (Row 1)
+ PORTF |= 0b11110010; // PF4 (Row 2), PF7 (Row 3), PF1 (Row 4), PF6 (Row 5), PF5 (Row 7)
+ PORTC |= 0b11000000; // PC6 (Row 6), PC7 (Row 9)
+ PORTD |= 0b10000000; // PD7 (Row 8)
+}
+
+static void select_output(uint8_t col)
+{
+ switch (col) {
+ case 0:
+ PORTB &= ~(1<<4);
+ break;
+ case 1:
+ PORTE &= ~(1<<2);
+ break;
+ case 2:
+ PORTF &= ~(1<<4);
+ break;
+ case 3:
+ PORTF &= ~(1<<7);
+ break;
+ case 4:
+ PORTF &= ~(1<<1);
+ break;
+ case 5:
+ PORTF &= ~(1<<6);
+ break;
+ case 6:
+ PORTC &= ~(1<<6);
+ break;
+ case 7:
+ PORTF &= ~(1<<5);
+ break;
+ case 8:
+ PORTD &= ~(1<<7);
+ break;
+ case 9:
+ PORTC &= ~(1<<7);
+ break;
+ }
+}