diff options
author | Jack Humbert <jack.humb@gmail.com> | 2015-03-16 12:01:35 -0400 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2015-03-16 12:01:35 -0400 |
commit | 9307a0a3e415d33d0858283f67fcba4c59a042ff (patch) | |
tree | 45252e53439dde1122945646f4fa340cf0a8923e /keyboard/hhkb_rn42/PowerSave.txt | |
parent | be86aefdbda560d6810f9594169fee4385c1422d (diff) | |
parent | c35c4283b9c2c65d62fe8dc5e4b7ca49a8f5af33 (diff) |
Merge pull request #6 from tmk/master
pulling from tmk
Diffstat (limited to 'keyboard/hhkb_rn42/PowerSave.txt')
-rw-r--r-- | keyboard/hhkb_rn42/PowerSave.txt | 102 |
1 files changed, 0 insertions, 102 deletions
diff --git a/keyboard/hhkb_rn42/PowerSave.txt b/keyboard/hhkb_rn42/PowerSave.txt deleted file mode 100644 index 943923c336..0000000000 --- a/keyboard/hhkb_rn42/PowerSave.txt +++ /dev/null @@ -1,102 +0,0 @@ -RN-42 -===== - -HHKB key switch power control ------------------------------ -MOS FET Nch: BSS138 or IRLML6344T, either works and no apparent difference. -Normally on(pull-up) or off(pull-down)? interms of power saving it prefers pull-down? - -Pull-down will be better for power saving, normally off. - - - -Used Timer ----------- - -8MHz clock ----------- -1) 16MHz xtal with system prescaler div2: F_CPU=8MHz, F_USB=16MHz -2) 8MHz xtal with div1: F_CPU=8MHz, F_USB=8MHz -Hardware USART doesn't work at 115200bps with 8MHz(F_CPU). - -workaround: -a) use Sotwre serial for communcation with RN-42 -b) reduce baud of RN-42 to lower rate;(factory default is 115200bps) -10/03 - - - -Slave mode ----------- -Discovery/Inquire -Connect/Page - -SI,0012 -SJ,0012 -InqWindw=0100 -PagWindw=0100 - - -Sniff mode ----------- -0.625ms * <hex> -SW,0320 Very sluggish. Type is not lost but very slow to register. -SW,0160 Still sluggish. may transposed? can type but ... - Mouse point move intermittently -SW,0020 feel a bit late like stumble(20ms) -SW,0010 feel no latency(10ms) - - -Deep sleep ----------- -SW,8010 - - -TX power --------- -SY,fff4 - - -IO pins -------- -S%,1000 status led and connection control don't work - GPIO5: status LED - GPIO6: Connection control - GPIO2: linked status - - - - - -Ver 6.15 04/26/2013 -(c) Roving Networks -***Settings*** -BTA=00066667BBE9 -BTName=tmkBT-BBE9 -Baudrt(SW4)=115K -Mode =DTR -Authen=1 -Bonded=0 -Rem=001BDC06415B -***ADVANCED Settings*** -SrvName= keyboard/mouse -SrvClass=0000 -DevClass=1F00 -InqWindw=0012 -PagWindw=0012 -CfgTimer=255 -StatuStr=NULL -HidFlags=3c -DTRtimer=8 -KeySwapr=0 -***OTHER Settings*** -Profile= HID -CfgChar= $ -SniffEna=8010 -LowPower=0 S|, -TX Power=fff4 SY, -IOPorts= 0 -IOValues=0 -Sleeptmr=0 -DebugMod=0 -RoleSwch=0 |