diff options
author | Jack Humbert <jack.humb@gmail.com> | 2015-03-16 12:01:35 -0400 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2015-03-16 12:01:35 -0400 |
commit | 9307a0a3e415d33d0858283f67fcba4c59a042ff (patch) | |
tree | 45252e53439dde1122945646f4fa340cf0a8923e /keyboard/hhkb_rn42/Makefile | |
parent | be86aefdbda560d6810f9594169fee4385c1422d (diff) | |
parent | c35c4283b9c2c65d62fe8dc5e4b7ca49a8f5af33 (diff) |
Merge pull request #6 from tmk/master
pulling from tmk
Diffstat (limited to 'keyboard/hhkb_rn42/Makefile')
-rw-r--r-- | keyboard/hhkb_rn42/Makefile | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/keyboard/hhkb_rn42/Makefile b/keyboard/hhkb_rn42/Makefile deleted file mode 100644 index 3d9a602a58..0000000000 --- a/keyboard/hhkb_rn42/Makefile +++ /dev/null @@ -1,157 +0,0 @@ -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device. -# Please customize your programmer settings(PROGRAM_CMD) -# -# make teensy = Download the hex file to the device, using teensy_loader_cli. -# (must have teensy_loader_cli installed). -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - -# Target file name (without extension). -TARGET = hhkb_lufa - -# Directory common source filess exist -TOP_DIR = ../.. - -# Directory keyboard dependent files exist -TARGET_DIR = . - - -# List C source files here. (C dependencies are automatically generated.) -SRC += keymap_common.c \ - matrix.c \ - led.c - -CONFIG_H = config.h - - -# MCU name -# PJRC Teensy++ 2.0 -#MCU = at90usb1286 -# TMK Alt Controller or PJRC Teensy 2.0 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task -#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 (TMK Alt Controller) -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -#NKRO_ENABLE = yes # USB Nkey Rollover -#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor -#HHKB_JP = yes # HHKB JP support - - -ifdef HHKB_JP - OPT_DEFS += -DHHKB_JP -endif - - -# -# Keymap file -# -ifdef KEYMAP - SRC := keymap_$(KEYMAP).c $(SRC) -else - ifdef HHKB_JP - SRC := keymap_jp.c $(SRC) - else - SRC := keymap_hasu.c $(SRC) - endif -endif - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TOP_DIR) - -include rn42.mk -include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/protocol/lufa.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk - -debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION -debug-on: all - -debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT -debug-off: all |