summaryrefslogtreecommitdiff
path: root/keyboard/hhkb/README
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2012-11-01 14:24:21 +0900
committertmk <nobody@nowhere>2012-11-01 14:24:21 +0900
commit208f6d7f9146782d4c437aedf75a0a7043db7765 (patch)
tree7fbf3fe31ebdfab279685cf5dad2e2346e7357c7 /keyboard/hhkb/README
parent16a583d7fd057c3ebcb859db44f097fd8073ec49 (diff)
Improve documentation
Diffstat (limited to 'keyboard/hhkb/README')
-rw-r--r--keyboard/hhkb/README151
1 files changed, 0 insertions, 151 deletions
diff --git a/keyboard/hhkb/README b/keyboard/hhkb/README
deleted file mode 100644
index 65f7dcab5a..0000000000
--- a/keyboard/hhkb/README
+++ /dev/null
@@ -1,151 +0,0 @@
-Alternative Controller for HHKB
-===============================
-
-Feature
--------
-- Mouse Keys
-- NKRO on USB(PJRC Tennsy only)
-- Keymap Layers
-
-
-Customize Keymap
-----------------
-see keymap.c.
-
-
-
-Build
-=====
-PJRC Teensy
------------
-0. Edit matrix.c.
- adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
-1. Define macros in config_pjrc.h.(Optional)
- VENDOR_ID, PRODUCT_ID and string descriptor.
- IS_COMMAND
-2. Edit Makefile for MCU setting and build options.
- MCU, F_CPU
- MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, NKRO_ENABLE
-3. Build hex file.
- $ make -f Makefile.pjrc
-4. Program MCU.
- $ make -f Makefile.pjrc program
-
-
-V-USB
------
-0. Edit matrix.c and usbconfig.h.
- adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
- define macros for V-USB in usbconfig.h.
-1. Define macros in config_vusb.h.(Optional)
- IS_COMMAND
-2. Edit Makefile.vusb for MCU setting and build options.
- MCU, F_CPU
- MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
-3. Build hex file.
- $ make -f Makefile.vusb
-4. Program MCU.
- $ make -f Makefile.vusb program
-
- Using a bootloader to program for convenience is recommended.
- Once program this V-USB bootloader at first, you can program MCU without
- extra programmer. You should have reset switch to start up as bootloader
- mode in this case.
- USBaspLoader:
- http://www.obdev.at/products/vusb/usbasploader.html
-
-
-iWRAP
------
-0. Edit matrix.c and usbconfig.h.
- adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
- define macros for V-USB in usbconfig.h.
-1. Define macros in config_iwrap.h.(Optional)
- IS_COMMAND
-2. Edit Makefile.iwrap for MCU setting and build options.
- MCU, F_CPU
- MOUSEKEY_ENABLE, EXTRAKEY_ENABLE
-3. Build hex file.
- $ make -f Makefile.iwrap
-4. Program MCU.
- $ make -f Makefile.iwrap program
-
-
-
-Hardware
-========
-PJRC Teensy
------------
- +---------------+
- | Teensy++ |
- | |
- | | HHKB
- | | ~~~~
- | PB0-2|------->ROW(6-8)
- | PB3-5|------->COL(9-11)
- | PB6|------->ENABLE(12)
- | PE6|<-------KEY(4)
- | PE7|------->PREV(5)
- | |
- | |
- | |
- +---------------+
-
-
-V-USB
------
- +---+ +---------------+
-USB GND | | ATmega168 |
-~~~ C3 | |
-5V <-------+--------+---|Vcc,AVCC | HHKB
- R1 | | ~~~~
-D- <----+--+-----R2-----|INT1 PB2-4|------->ROW(6-8)
-D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
- Z1 Z2 | PC3|------->ENABLE(12)
-GND<----+---+-----------|GND PB0|<-------KEY(4)
- | PB1|------->PREV(5)
- | |
- GND+-C2--+--|XTAL1 RXD|------->Debug Console
- X1 | TXD|<-------Debug Console
- GND+-C3--+--|XTAL2 RST|---SW--+GND
- +---------------+
-R1: 1.5K Ohm
-R2,R3: 68 Ohm
-Z1,Z2: Zener 3.6V
-C1,C2: 22pF
-C3: 0.1uF
-X1: Crystal 20MHz(16MHz/12MHz)
-SW: Push Switch(Optional for bootloader)
-
-
-iWRAP
------
- +---------------+ WT12
- 5V | ATmega168 | 5V/3.3V~~~~
- +-----+---|Vcc,AVCC PC4|---/--->iWRAP(RxD)
-USB | C3 | PC5|<--/----iWRAP(TxD)
-~~~ | + | |
-5V <--BATT + GND | | HHKB
- R1 | | ~~~~
-D- <----+-----+--R2-----|INT1 PB2-4|------->ROW(6-8)
-D+ <----|---+----R3-----|INT0 PC0-2|------->COL(9-11)
- Z1 Z2 | PC3|------->ENABLE(12)
-GND<----+---+-----------|GND PB0|<-------KEY(4)
- | PB1|------->PREV(5)
- | |
- GND+-C2--+--|XTAL1 RXD|------->Debug Console
- X1 | TXD|<-------Debug Console
- GND+-C3--+--|XTAL2 RST|---SW--+GND
- +---------------+
-
-R1: 1.5K Ohm
-R2,R3: 68 Ohm
-Z1,Z2: Zener 3.6V
-C1,C2: 22pF
-C3: 0.1uF
-X1: Crystal 12MHz
-SW: Push Switch(Optional)
-BATT: Li-Po Battery, Battery Charger and Voltage Regulator(5V and 3.3V).
-
-
-EOF