atomic up-to-date

11 files changed, 0 insertions, 890 deletions

diff --git a/keyboard/atomic_old/Makefile b/keyboard/atomic_old/Makefile
deleted file mode 100644
index c4e0cb45d7..0000000000
--- a/keyboard/atomic_old/Makefile
+++ /dev/null
@@ -1,135 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = atomic_lufa
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_vlad.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = yes	# Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
-
-
-# Optimize size but this may cause error "relocation truncated to fit"
-#EXTRALDFLAGS = -Wl,--relax
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
-
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
diff --git a/keyboard/atomic_old/Makefile.pjrc b/keyboard/atomic_old/Makefile.pjrc
deleted file mode 100644
index 9655ff65a9..0000000000
--- a/keyboard/atomic_old/Makefile.pjrc
+++ /dev/null
@@ -1,116 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = gh60_pjrc
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_poker.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-MCU = atmega32u4
-#MCU = at90usb1286
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
-CONSOLE_ENABLE = yes    # Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
-
-plain: OPT_DEFS += -DKEYMAP_PLAIN
-plain: all
-
-poker: OPT_DEFS += -DKEYMAP_POKER
-poker: all
-
-poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
-poker_set: all
-
-poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
-poker_bit: all
diff --git a/keyboard/atomic_old/README 2.md b/keyboard/atomic_old/README 2.md
deleted file mode 100644
index 510cb5c8b6..0000000000
--- a/keyboard/atomic_old/README 2.md
+++ /dev/null
@@ -1,141 +0,0 @@
-GH60 keyboard firmware
-======================
-DIY compact keyboard designed and run by komar007 and Geekhack community.
-
-- Both Rev.A and Rev.B PCB are supported by one firmware binary(issue #64)
-
-## GH60 Resources
-- [KOMAR's project page](http://blog.komar.be/projects/gh60-programmable-keyboard/)
-- [Prototyping](http://geekhack.org/index.php?topic=34959.0)
-- [Rev.A PCB test](http://geekhack.org/index.php?topic=37570.0)
-- [Rev.B PCB test](http://geekhack.org/index.php?topic=50685.0)
-- [Group buy](http://geekhack.org/index.php?topic=41464.0)
-
-
-## Build
-Move to this directory then just run `make` like:
-
-    $ make
-
-Use `make -f Makefile.pjrc` if you want to use PJRC stack but I find no reason to do so now.
-
-
-## Keymap
-Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
-
-To build firmware binary hex file with a certain keymap just do `make` with `KEYMAP` option like:
-
-    $ make KEYMAP=[poker|poker_set|poker_bit|plain|hasu|spacefn|hhkb|<name>]
-
-
-### 1  Poker
-[keymap_poker.c](keymap_poker.c) emulates original Poker layers
-while both [keymap_poker_bit.c](keymap_poker_bit.c) and [keymap_poker_set.c](keymap_poker_set.c) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys.
-
-    Fn + Esc = `
-    Fn + {left, down, up, right}  = {home, pgdown, pgup, end}
-
-#### 1.0 Default layer
-    ,-----------------------------------------------------------.
-    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-    |-----------------------------------------------------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-    |-----------------------------------------------------------|
-    |Ctrl|Gui |Alt |      Space             |Fn  |Gui |App |Ctrl|
-    `-----------------------------------------------------------'
-#### 1.1 Poker Fn layer
-    ,-----------------------------------------------------------.
-    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|       |
-    |-----------------------------------------------------------|
-    |     |FnQ| Up|   |   |   |   |   |   |Cal|   |Hom|Ins|     |
-    |-----------------------------------------------------------|
-    |      |Lef|Dow|Rig|   |   |Psc|Slk|Pau|   |Tsk|End|        |
-    |-----------------------------------------------------------|
-    |        |Del|   |Web|Mut|VoU|VoD|   |PgU|PgD|Del|   Up     |
-    |-----------------------------------------------------------|
-    |    |    |    |         FnS            |Fn  |Left|Down|Righ|
-    `-----------------------------------------------------------'
-
-
-### 2. Plain
-Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host.
-See [keymap_plain.c](keymap_plain.c) for detail.
-
-#### 1.0 Plain Default layer
-    ,-----------------------------------------------------------.
-    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-    |-----------------------------------------------------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-    |-----------------------------------------------------------|
-    |Ctrl|Gui |Alt |      Space             |Alt |Gui |App |Ctrl|
-    `-----------------------------------------------------------'
-
-
-### 3. Hasu
-This is my favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap_hasu.c](keymap_hasu.c) for detail.
-
-
-### 4. SpaceFN
-This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap_spacefn.c](keymap_spacefn.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0).
-
-#### 4.0 Default layer
-    ,-----------------------------------------------------------.
-    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backsp |
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-    |-----------------------------------------------------------|
-    |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift     |
-    |-----------------------------------------------------------|
-    |Ctrl|Gui |Alt |      Space/Fn          |Alt |Gui |App |Ctrl|
-    `-----------------------------------------------------------'
-#### 4.1 SpaceFN layer
-    ,-----------------------------------------------------------.
-    |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
-    |-----------------------------------------------------------|
-    |     |   |   |   |   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
-    |-----------------------------------------------------------|
-    |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
-    |-----------------------------------------------------------|
-    |        |   |   |   |   |Spc|PgD|`  |~  |   |   |          |
-    |-----------------------------------------------------------|
-    |    |    |    |            Fn          |    |    |    |    |
-    `-----------------------------------------------------------'
-
-
-### 5. HHKB
-[keymap_hhkb.c](keymap_hhkb.c) emulates original HHKB layers.
-#### 5.0: Default layer
-    ,-----------------------------------------------------------.
-    |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
-    |-----------------------------------------------------------|
-    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Bspc |
-    |-----------------------------------------------------------|
-    |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|Fn3|  '|Return  |
-    |-----------------------------------------------------------|
-    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn |
-    |-----------------------------------------------------------|
-    |    |Gui |Alt |      Space             |    |Alt |Gui |    |
-    `-----------------------------------------------------------'
-#### 5.1: HHKB Fn layer
-    ,-----------------------------------------------------------.
-    |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
-    |-----------------------------------------------------------|
-    |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
-    |-----------------------------------------------------------|
-    |      |VoD|VoU|Mut|Ejc|   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
-    |-----------------------------------------------------------|
-    |        |   |   |   |   |   |  +|  -|End|PgD|Dow|      |   |
-    |-----------------------------------------------------------|
-    |    |    |    |                        |    |    |    |    |
-    `-----------------------------------------------------------'
-
diff --git a/keyboard/atomic_old/config.h b/keyboard/atomic_old/config.h
deleted file mode 100644
index 5ea953805f..0000000000
--- a/keyboard/atomic_old/config.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    Ortholinear Keyboards
-#define PRODUCT         Atomic Keyboard
-#define DESCRIPTION     t.m.k. keyboard firmware for Atomic
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboard/atomic_old/keymap_common.c b/keyboard/atomic_old/keymap_common.c
deleted file mode 100644
index fdb1769e1c..0000000000
--- a/keyboard/atomic_old/keymap_common.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#include "keymap_common.h"
-
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-/* translates Fn keycode to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
-}
diff --git a/keyboard/atomic_old/keymap_common.h b/keyboard/atomic_old/keymap_common.h
deleted file mode 100644
index c582c0135f..0000000000
--- a/keyboard/atomic_old/keymap_common.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
-Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#ifndef KEYMAP_COMMON_H
-#define KEYMAP_COMMON_H
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "action.h"
-#include "action_macro.h"
-#include "report.h"
-#include "host.h"
-#include "print.h"
-#include "debug.h"
-#include "keymap.h"
-
-
-extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
-extern const uint16_t fn_actions[];
-
-// JCK: Semi-Standard layout
-#define KEYMAP_JCK( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2D,   K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3C,   K3D, K3E, \
-     K40,  K41,  K43,           K46,                  K4A, K4B, K4C, K4D, K4E  \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D, KC_##K2E }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_##K3C, KC_##K3D, KC_##K3E }, \
-    { KC_##K40, KC_##K41, KC_NO,    KC_##K43, KC_NO,    KC_NO,    KC_##K46, KC_NO,    KC_NO,    KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
-}
-
-// ASK: Short Space layout
-#define KEYMAP_ASK_MESSY( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2D,   K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3C,   K3D, K3E, \
-     K40,  K41,  K43,  K44,        K46,     K48, K49, K4A, K4B, K4C, K4D, K4E  \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO,    KC_##K2D, KC_##K2E }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_##K3C, KC_##K3D, KC_##K3E }, \
-    { KC_##K40, KC_##K41, KC_NO,    KC_##K43, KC_##K44, KC_NO,    KC_##K46, KC_NO,    KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
-}
-
-#define KEYMAP_ASK( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,   K0E,    \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,    K2C,   K2E, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,    K3B,   K3D, K3E, \
-     K40,  K41,  K43,  K44,        K46,     K47, K48, K4A, K4B, K4C, K4D, K4E  \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_NO,    KC_##K0E }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_NO,    KC_##K2E }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_NO,    KC_##K3D, KC_##K3E }, \
-    { KC_##K40, KC_##K41, KC_NO,    KC_##K43, KC_##K44, KC_NO,    KC_##K46, KC_##K47, KC_##K48, KC_NO,    KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E }  \
-}
-
-
-// MLO: Semi-Grid layout
-
-// KLN: Grid layout
-
-// PKR: Standard layout
-
-#endif
diff --git a/keyboard/atomic_old/keymap_plain.c b/keyboard/atomic_old/keymap_plain.c
deleted file mode 100644
index e7f53649f0..0000000000
--- a/keyboard/atomic_old/keymap_plain.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP_JCK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, DEL, \
-                     ESC,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     MPLY, \
-                     LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
-                     LCTL,    LALT,  LGUI,          SPC,                         FN1,  LEFT, DOWN, UP,   RGHT),
-    [1] = KEYMAP_JCK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    F,    P,    G,    J,    L,    U,    Y,    SCLN, LBRC, RBRC, BSLS, DEL, \
-                     ESC,  A,    R,    S,    T,    D,    H,    N,    E,    I,    O,    QUOT,    ENT,     MPLY, \
-                     LSFT, Z,    X,    C,    V,    B,    K,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
-                     LCTL,    LALT,  LGUI,          SPC,                         FN1,  LEFT, DOWN, UP,   RGHT),
-    [2] = KEYMAP_JCK(GRV,  F1,   F2,   F3,   F4,   F5,   F6,   F7,   F8,   F9,   F10,  F11,  F12,    BSPC, \
-                     TAB,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    LBRC, RBRC, BSLS, DEL, \
-                     ESC,  FN3, FN4, TRNS, TRNS, TRNS, TRNS, MINS, EQL,  LBRC, RBRC,   BSLS,    ENT,     MPLY, \
-                     LSFT, FN9,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    VOLD, VOLU, \
-                     LCTL,    LALT,  LGUI,          SPC,                         TRNS,  MNXT, VOLD, VOLU, MPLY),
-};
-const uint16_t PROGMEM fn_actions[] = {
-    [1] = ACTION_LAYER_MOMENTARY(2),  // to Fn overlay
-    [3] = ACTION_DEFAULT_LAYER_SET(0), 
-    [4] = ACTION_DEFAULT_LAYER_SET(1),  
-
-    [9] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
- 
-    [10] = ACTION_MODS_KEY(MOD_LSFT, KC_1),
-    [11] = ACTION_MODS_KEY(MOD_LSFT, KC_2),
-    [12] = ACTION_MODS_KEY(MOD_LSFT, KC_3),
-    [13] = ACTION_MODS_KEY(MOD_LSFT, KC_4),
-    [14] = ACTION_MODS_KEY(MOD_LSFT, KC_5),
-    [15] = ACTION_MODS_KEY(MOD_LSFT, KC_6),
-    [16] = ACTION_MODS_KEY(MOD_LSFT, KC_7),
-    [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8),
-    [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9),
-    [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0),
-    [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS),
-    [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL),
-    [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),
-    [23] = ACTION_MODS_KEY(MOD_LSFT, KC_LBRC),
-    [24] = ACTION_MODS_KEY(MOD_LSFT, KC_RBRC),
-    [28] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS),
-};
diff --git a/keyboard/atomic_old/keymap_ricky.c b/keyboard/atomic_old/keymap_ricky.c
deleted file mode 100644
index fcc91a1fa5..0000000000
--- a/keyboard/atomic_old/keymap_ricky.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP_JCK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, PSCR, \
-                     CAPS, A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     INS, \
-                     LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    UP, DEL, \
-                     LCTL,    LGUI,  LALT,          SPC,                         RALT,  RCTL, LEFT, DOWN,   RGHT)
-};
-const uint16_t PROGMEM fn_actions[] = {
-};
-
diff --git a/keyboard/atomic_old/keymap_vlad.c b/keyboard/atomic_old/keymap_vlad.c
deleted file mode 100644
index e56bcf1618..0000000000
--- a/keyboard/atomic_old/keymap_vlad.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include "keymap_common.h"
-
-// JCK: Semi-Standard layout
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* 0: qwerty */
-    [0] = KEYMAP_ASK(GRV,  1,    2,    3,    4,    5,    6,    7,    8,    9,    0,    MINS, EQL,    BSPC, \
-                     TAB,  Q,    W,    E,    R,    T,    Y,    U,    I,    O,    P,    LBRC, RBRC, BSLS, DEL, \
-                     CAPS,  A,    S,    D,    F,    G,    H,    J,    K,    L,    SCLN, QUOT,    ENT,     VOLU, \
-                     LSFT, Z,    X,    C,    V,    B,    N,    M,    COMM, DOT,  SLSH,    RSFT,    UP, VOLD, \
-                     LCTL,    LGUI,  LALT,   LGUI,     SPC,           RGUI,       RALT, RGUI, RCTL, LEFT, DOWN,   RGHT)
-};
-const uint16_t PROGMEM fn_actions[] = {
-};
\ No newline at end of file
diff --git a/keyboard/atomic_old/led.c b/keyboard/atomic_old/led.c
deleted file mode 100644
index 2d52fbf1c3..0000000000
--- a/keyboard/atomic_old/led.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include "stdint.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-}
diff --git a/keyboard/atomic_old/matrix.c b/keyboard/atomic_old/matrix.c
deleted file mode 100644
index 98102cb694..0000000000
--- a/keyboard/atomic_old/matrix.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "action_layer.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 10
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-/* Column pin configuration
- * col: 0  1  2  3  4  5  6  7  8  9  10 11
- * pin: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D5 D4
- */
-
-static void init_cols(void)
-{
-    DDRC  &= ~(1<<6 | 1<<7);
-    PORTC |=  (1<<6 | 1<<7);
-    DDRD  &= ~(1<<4 | 1<<5 | 1<<6 | 1<<7);
-    PORTD |=  (1<<4 | 1<<5 | 1<<6 | 1<<7);
-    DDRB  &= ~(1<<4 | 1<<5 | 1<<6);
-    PORTB |=  (1<<4 | 1<<5 | 1<<6);
-    DDRF  &= ~(1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
-    PORTF |=  (1<<0 | 1<<1 | 1<<4 | 1<<5 | 1<<6 | 1<<7);
-}
-
-static matrix_row_t read_cols(void)
-{
-    return (PINC&(1<<6) ? 0 : (1<< 0)) |
-           (PINC&(1<<7) ? 0 : (1<< 1)) |
-           (PIND&(1<<5) ? 0 : (1<< 2)) |
-           (PIND&(1<<4) ? 0 : (1<< 3)) |
-           (PIND&(1<<6) ? 0 : (1<< 4)) |
-           (PIND&(1<<7) ? 0 : (1<< 5)) |
-           (PINB&(1<<4) ? 0 : (1<< 6)) |
-           (PINB&(1<<5) ? 0 : (1<< 7)) |
-           (PINB&(1<<6) ? 0 : (1<< 8)) |
-           (PINF&(1<<7) ? 0 : (1<< 9)) |
-           (PINF&(1<<6) ? 0 : (1<<10)) |
-           (PINF&(1<<5) ? 0 : (1<<11)) |
-           (PINF&(1<<4) ? 0 : (1<<12)) |
-           (PINF&(1<<1) ? 0 : (1<<13)) |
-           (PINF&(1<<0) ? 0 : (1<<14));
-}
-
-/* Row pin configuration
- * row: 0  1  2  3
- * pin: B0 B1 B2 B3
- */
-static void unselect_rows(void)
-{
-    // Hi-Z(DDR:0, PORT:0) to unselect
-    DDRB  &= ~(1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
-    PORTB |=  (1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<7);
-}
-
-static void select_row(uint8_t row)
-{
-    switch (row) {
-        case 0:
-            DDRB  |= (1<<0);
-            PORTB &= ~(1<<0);
-            break;
-        case 1:
-            DDRB  |= (1<<1);
-            PORTB &= ~(1<<1);
-            break;
-        case 2:
-            DDRB  |= (1<<2);
-            PORTB &= ~(1<<2);
-            break;
-        case 3:
-            DDRB  |= (1<<3);
-            PORTB &= ~(1<<3);
-            break;
-        case 4:
-            DDRB  |= (1<<7);
-            PORTB &= ~(1<<7);
-            break;
-    }
-}