summaryrefslogtreecommitdiff
path: root/converter
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2014-09-24 15:50:29 +0900
committertmk <nobody@nowhere>2014-09-24 15:50:29 +0900
commit27967f20086c4e3a86a4a442429a12acc330495c (patch)
treed20190dbb2a363b67cb75df1c0e879aa0c3bd8dc /converter
parentdd3ab65ec348370e789f4136af2c6cdb95c2532c (diff)
Add TMK converter support to Next converter
- change protocol stack to LUFA
Diffstat (limited to 'converter')
-rw-r--r--converter/next_usb/Makefile26
-rw-r--r--converter/next_usb/Makefile.pjrc63
-rw-r--r--converter/next_usb/config.h38
3 files changed, 126 insertions, 1 deletions
diff --git a/converter/next_usb/Makefile b/converter/next_usb/Makefile
index 51d9de6b11..fef539a147 100644
--- a/converter/next_usb/Makefile
+++ b/converter/next_usb/Makefile
@@ -20,6 +20,7 @@ CONFIG_H = config.h
MCU = atmega32u4 # Teensy 2.0
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
+#MCU = atmega32u2 # TMK converter
# Processor frequency.
@@ -30,6 +31,29 @@ MCU = atmega32u4 # Teensy 2.0
F_CPU = 16000000
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
@@ -58,6 +82,6 @@ VPATH += $(TOP_DIR)
include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol/lufa.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
diff --git a/converter/next_usb/Makefile.pjrc b/converter/next_usb/Makefile.pjrc
new file mode 100644
index 0000000000..51d9de6b11
--- /dev/null
+++ b/converter/next_usb/Makefile.pjrc
@@ -0,0 +1,63 @@
+# Target file name (without extension).
+TARGET = next_usb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+SRC += next_kbd.c
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/next_usb/config.h b/converter/next_usb/config.h
index b3d188b0c1..cd80b5af1b 100644
--- a/converter/next_usb/config.h
+++ b/converter/next_usb/config.h
@@ -60,6 +60,7 @@ POSSIBILITY OF SUCH DAMAGE.
//#define TEENSY_CONFIG 1
#define PRO_MICRO_CONFIG 1
+//#define TMK_CONFIG 1
// comment out if you don't want the keyboard's LEDs to flash upon initialization
#define NEXT_KBD_INIT_FLASH_LEDS
@@ -143,6 +144,43 @@ POSSIBILITY OF SUCH DAMAGE.
#endif
//================= End of Teensy 2.0 Configuration ==================
+
+//================ Start of TMK converter Configuration =================
+#ifdef TMK_CONFIG
+
+// this is the debugging LED that flashes when a key is being pressed
+// comment out in order to disable debugging LED
+#define NEXT_KBD_LED1_PORT PORTD
+#define NEXT_KBD_LED1_PIN PIND
+#define NEXT_KBD_LED1_DDR DDRD
+#define NEXT_KBD_LED1_BIT 6
+
+#define NEXT_KBD_LED1_ON NEXT_KBD_LED1_PORT |= (1<<NEXT_KBD_LED1_BIT);
+#define NEXT_KBD_LED1_OFF NEXT_KBD_LED1_PORT &= ~(1<<NEXT_KBD_LED1_BIT);
+
+// corresponds to the Keyboard In wire on the NeXT connector
+#define NEXT_KBD_OUT_PORT PORTD
+#define NEXT_KBD_OUT_PIN PIND
+#define NEXT_KBD_OUT_DDR DDRD
+#define NEXT_KBD_OUT_BIT 1
+
+// corresponds to the Keyboard Out wire on the NeXT connector
+#define NEXT_KBD_IN_PORT PORTD
+#define NEXT_KBD_IN_PIN PIND
+#define NEXT_KBD_IN_DDR DDRD
+#define NEXT_KBD_IN_BIT 0
+
+// this pin is an input for the power key on the NeXT keyboard
+// as the keyboard is powered on this should be normally high;
+// if it is pulled low it means the power button is being preseed
+#define NEXT_KBD_PWR_PORT PORTD
+#define NEXT_KBD_PWR_PIN PIND
+#define NEXT_KBD_PWR_DDR DDRD
+#define NEXT_KBD_PWR_BIT 4
+
+#endif
+//================= End of TMK converter Configuration ==================
+
/* key combination for command */
#define IS_COMMAND() ( \
(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))|| \