Merge branch 'newdir'

46 files changed, 5042 insertions, 0 deletions

diff --git a/converter/adb_usb/Makefile b/converter/adb_usb/Makefile
new file mode 100644
index 0000000000..64a23d09dc
--- /dev/null
+++ b/converter/adb_usb/Makefile
@@ -0,0 +1,54 @@
+# Target file name (without extension).
+TARGET = adb_usb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	adb.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+#MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/adb_usb/README b/converter/adb_usb/README
new file mode 100644
index 0000000000..5d0e1bc86b
--- /dev/null
+++ b/converter/adb_usb/README
@@ -0,0 +1,70 @@
+ADB to USB keyboard converter
+=============================
+http://geekhack.org/showwiki.php?title=Island:14290
+
+This firmware converts ADB keyboard protocol to USB.
+
+
+Build
+-----
+0. Connect ADB keyboard to Teensy by 3 lines(Vcc, GND, Data).
+   You need a external pull-up resistor on DATA line in most case,
+   in particular when you want to use a long or coiled cable.
+   This converter uses AVR's internal pull-up, but it seems to be too weak.
+   The external pull-up resistor is strongly recommended.
+   PSW line is optional. See ADB.txt for details.
+1. Define following macros for ADB connection in config.h:
+   ADB_PORT
+   ADB_PIN
+   ADB_DDR
+   ADB_DATA_BIT
+   ADB_PSW_BIT
+2. make
+3. program Teensy.
+
+
+Keymap
+------
+You can change a keymap by editing code of keymap.c like following.
+This is a keymap for AEK, however, also used for other keyboards.
+How to define the keymap is probably obvious. You can find  key
+symbols in usb_keycodes.h.
+If you want to define some keymaps than just one, see hhkb/keymap.c and
+macway/keymap.c as examples. Keymap(layer) switching may needs a bit of
+effort at this time.
+
+    /* Default Layer: plain keymap
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.             ,---.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|             |Pwr|
+     * `---'   `---------------' `---------------' `---------------' `-----------'             `---'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  =|  /|  *|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|  -|
+     * |-----------------------------------------------------------| `-----------' |---------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|  +|
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl |Gui |Alt |         Space           |     |    |      | |Lef|Dow|Rig| |      0|  .|   |
+     * `-----------------------------------------------------------' `-----------' `---------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,                    PWR,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PMNS,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                                              LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+
+Notes
+-----
+Many ADB keyboards has no discrimination between right modifier and left one,
+you will always see left control even if you press right control key.
+Apple Extended Keyboard and Apple Extended Keyboard II are the examples.
+Though ADB protocol itsef has the ability of distinction between right and left.
+And most ADB keyboard has no NKRO functionality, though ADB protocol itsef has that. 
+
+EOF
diff --git a/converter/adb_usb/config.h b/converter/adb_usb/config.h
new file mode 100644
index 0000000000..52d5925a50
--- /dev/null
+++ b/converter/adb_usb/config.h
@@ -0,0 +1,72 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0ADB
+#define DEVICE_VER      0x0101
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         ADB keyboard converter
+#define DESCRIPTION     convert ADB keyboard to USB
+
+/* matrix size */
+#define MATRIX_ROWS 16  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+/* Locking Caps Lock support */
+#define MATRIX_HAS_LOCKING_CAPS
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+/* PS/2 mouse */
+#ifdef PS2_MOUSE_ENABLE
+#   define PS2_CLOCK_PORT  PORTF
+#   define PS2_CLOCK_PIN   PINF
+#   define PS2_CLOCK_DDR   DDRF
+#   define PS2_CLOCK_BIT   0
+#   define PS2_DATA_PORT   PORTF
+#   define PS2_DATA_PIN    PINF
+#   define PS2_DATA_DDR    DDRF
+#   define PS2_DATA_BIT    1
+#endif
+
+
+/* ADB port setting */
+#define ADB_PORT        PORTF
+#define ADB_PIN         PINF
+#define ADB_DDR         DDRF
+#define ADB_DATA_BIT    0
+//#define ADB_PSW_BIT     1       // optional
+
+#endif
diff --git a/converter/adb_usb/keymap.c b/converter/adb_usb/keymap.c
new file mode 100644
index 0000000000..cdaa935d32
--- /dev/null
+++ b/converter/adb_usb/keymap.c
@@ -0,0 +1,150 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for ADB keyboard
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keyboard.h"
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+/* Apple Extended Keyboard */
+#define KEYMAP( \
+    K35,  K7A,K78,K63,K76, K60,K61,K62,K64, K65,K6D,K67,K6F, K69,K6B,K71,              K7F, \
+    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K72,K73,K74,  K47,K51,K4B,K43, \
+    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K75,K77,K79,  K59,K5B,K5C,K4E, \
+    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,    K24,               K56,K57,K58,K45, \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,        K7B,     K3E,      K53,K54,K55,     \
+    K36,K3A,K37,        K31,                                 K3B,K3D,K3C,  K52,    K41,K4C  \
+) { \
+    { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_NO,    KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_NO,    KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO    }, \
+    { KB_NO,    KB_##K41, KB_NO,    KB_##K43, KB_NO,    KB_##K45, KB_NO,    KB_##K47 }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K4B, KB_##K4C, KB_NO,    KB_##K4E, KB_NO    }, \
+    { KB_NO,    KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_NO,    KB_##K5B, KB_##K5C, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_NO,    KB_##K67 }, \
+    { KB_NO,    KB_##K69, KB_NO,    KB_##K6B, KB_NO,    KB_##K6D, KB_NO,    KB_##K6F }, \
+    { KB_NO,    KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_NO,    KB_NO,    KB_NO,    KB_##K7F }  \
+}
+/* plain keymap
+    {
+        { KB_A,   KB_S,   KB_D,   KB_F,   KB_H,   KB_G,   KB_Z,   KB_X   }, // 00-07
+        { KB_C,   KB_V,   KB_NO,  KB_B,   KB_Q,   KB_W,   KB_E,   KB_R   }, // 08-0F
+        { KB_Y,   KB_T,   KB_1,   KB_2,   KB_3,   KB_4,   KB_6,   KB_5   }, // 10-17
+        { KB_EQL, KB_9,   KB_7,   KB_MINS,KB_8,   KB_0,   KB_RBRC,KB_O   }, // 18-1F
+        { KB_U,   KB_LBRC,KB_I,   KB_P,   KB_ENT, KB_L,   KB_J,   KB_QUOT}, // 20-27
+        { KB_K,   KB_SCLN,KB_BSLS,KB_COMM,KB_SLSH,KB_N,   KB_M,   KB_DOT }, // 28-2F
+        { KB_TAB, KB_SPC, KB_GRV, KB_BSPC,KB_NO,  KB_ESC, KB_LCTL,KB_LGUI}, // 30-37
+        { KB_LSFT,KB_CAPS,KB_LALT,KB_LEFT,KB_RGHT,KB_DOWN,KB_UP,  KB_NO  }, // 38-3F
+        { KB_NO,  KB_PDOT,KB_NO,  KB_PAST,KB_NO,  KB_PPLS,KB_NO,  KB_NLCK}, // 40-47
+        { KB_NO,  KB_NO,  KB_NO,  KB_PSLS,KB_PENT,KB_NO,  KB_PMNS,KB_NO  }, // 48-4F
+        { KB_NO,  KB_PEQL,KB_P0,  KB_P1,  KB_P2,  KB_P3,  KB_P4,  KB_P5  }, // 50-57
+        { KB_P6,  KB_P7,  KB_NO,  KB_P8,  KB_P9,  KB_NO,  KB_NO,  KB_NO  }, // 58-5F
+        { KB_F5,  KB_F6,  KB_F7,  KB_F3,  KB_F8,  KB_F9,  KB_NO,  KB_F11 }, // 60-67
+        { KB_NO,  KB_PSCR,KB_NO,  KB_SLCK,KB_NO,  KB_F10, KB_NO,  KB_F12 }, // 68-6F
+        { KB_NO,  KB_BRK, KB_INS, KB_HOME,KB_PGUP,KB_DEL, KB_F4,  KB_END }, // 70-77
+        { KB_F2,  KB_PGDN,KB_F1,  KB_RSFT,KB_NO,  KB_NO,  KB_NO,  KB_PWR }, // 78-7F
+    },
+*/
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default Layer: plain keymap
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.             ,---.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|             |Pwr|
+     * `---'   `---------------' `---------------' `---------------' `-----------'             `---'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  =|  /|  *|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|  -|
+     * |-----------------------------------------------------------| `-----------' |---------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|  +|
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl |Gui |Alt |         Space           |     |    |      | |Lef|Dow|Rig| |      0|  .|   |
+     * `-----------------------------------------------------------' `-----------' `---------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,                    PWR,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PMNS,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                                              LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/adb_usb/led.c b/converter/adb_usb/led.c
new file mode 100644
index 0000000000..0e162f379b
--- /dev/null
+++ b/converter/adb_usb/led.c
@@ -0,0 +1,26 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "adb.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    adb_host_kbd_led(~usb_led);
+}
diff --git a/converter/adb_usb/matrix.c b/converter/adb_usb/matrix.c
new file mode 100644
index 0000000000..a2367af56a
--- /dev/null
+++ b/converter/adb_usb/matrix.c
@@ -0,0 +1,241 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "host.h"
+#include "led.h"
+#include "adb.h"
+#include "matrix.h"
+
+
+#if (MATRIX_COLS > 16)
+#   error "MATRIX_COLS must not exceed 16"
+#endif
+#if (MATRIX_ROWS > 255)
+#   error "MATRIX_ROWS must not exceed 255"
+#endif
+
+#define CAPS        0x39
+#define CAPS_UP     (CAPS | 0x80)
+#define ROW(key)    ((key)>>3&0x0F)
+#define COL(key)    ((key)&0x07)
+
+
+static bool _matrix_is_modified = false;
+
+// matrix state buffer(1:on, 0:off)
+#if (MATRIX_COLS <= 8)
+static uint8_t *matrix;
+static uint8_t _matrix0[MATRIX_ROWS];
+#else
+static uint16_t *matrix;
+static uint16_t _matrix0[MATRIX_ROWS];
+#endif
+
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+static void _register_key(uint8_t key);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    adb_host_init();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    matrix = _matrix0;
+
+    print_enable = true;
+    debug_enable = true;
+    debug_matrix = true;
+    debug_keyboard = true;
+    debug_mouse = true;
+    print("debug enabled.\n");
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint16_t codes;
+    uint8_t key0, key1;
+
+    _matrix_is_modified = false;
+    codes = adb_host_kbd_recv();
+    key0 = codes>>8;
+    key1 = codes&0xFF;
+
+#ifdef MATRIX_HAS_LOCKING_CAPS
+    // Send Caps key up event
+    if (matrix_is_on(ROW(CAPS), COL(CAPS))) {
+        _matrix_is_modified = true;
+        _register_key(CAPS_UP);
+    }
+#endif
+    if (codes == 0) {                           // no keys
+        return 0;
+    } else if (key0 == 0xFF && key1 != 0xFF) {  // error
+        return codes&0xFF;
+    } else {
+#ifdef MATRIX_HAS_LOCKING_CAPS    
+        if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
+            // Ignore LockingCaps key down event when CAPS LOCK is on
+            if (key0 == CAPS && (key1 == CAPS || key1 == 0xFF)) return 0;
+            if (key0 == CAPS) key0 = key1;
+            if (key1 == CAPS) key1 = 0xFF;
+            // Convert LockingCaps key up event into down event
+            if (key0 == CAPS_UP) key0 = CAPS;
+            if (key1 == CAPS_UP) key1 = CAPS;
+        } else {
+            // CAPS LOCK off:
+            // Ignore LockingCaps key up event when CAPS LOCK is off
+            if (key0 == CAPS_UP && (key1 == CAPS_UP || key1 == 0xFF)) return 0;
+            if (key0 == CAPS_UP) key0 = key1;
+            if (key1 == CAPS_UP) key1 = 0xFF;
+        }
+#endif        
+        _matrix_is_modified = true;
+        _register_key(key0);
+        if (key1 != 0xFF)       // key1 is 0xFF when no second key.
+            _register_key(key1);
+    }
+
+    if (debug_enable) {
+        print("adb_host_kbd_recv: "); phex16(codes); print("\n");
+    }
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    return _matrix_is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+#if (MATRIX_COLS <= 8)
+uint8_t matrix_get_row(uint8_t row)
+#else
+uint16_t matrix_get_row(uint8_t row)
+#endif
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+#if (MATRIX_COLS <= 8)
+    print("\nr/c 01234567\n");
+#else
+    print("\nr/c 0123456789ABCDEF\n");
+#endif
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+#if (MATRIX_COLS <= 8)
+        pbin_reverse(matrix_get_row(row));
+#else
+        pbin_reverse16(matrix_get_row(row));
+#endif
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+#if (MATRIX_COLS <= 8)
+        count += bitpop(matrix[i]);
+#else
+        count += bitpop16(matrix[i]);
+#endif
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+inline
+static void _register_key(uint8_t key)
+{
+    uint8_t col, row;
+    col = key&0x07;
+    row = (key>>3)&0x0F;
+    if (key&0x80) {
+        matrix[row] &= ~(1<<col);
+    } else {
+        matrix[row] |=  (1<<col);
+    }
+}
diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile
new file mode 100644
index 0000000000..4a687b9333
--- /dev/null
+++ b/converter/m0110_usb/Makefile
@@ -0,0 +1,57 @@
+# Target file name (without extension).
+TARGET = m0110
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	m0110.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+
+hasu: EXTRAFLAGS += -DHASU
+hasu: all
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
new file mode 100644
index 0000000000..0ad3631f7c
--- /dev/null
+++ b/converter/m0110_usb/README.md
@@ -0,0 +1,124 @@
+M0110/M0110A to USB keyboard converter
+======================================
+This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
+Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
+you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
+
+![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg)
+
+M0110A support was contributed by [skagon@github](https://github.com/skagon).
+
+
+
+Connection
+----------
+You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
+Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
+you can change pin configuration with editing *config.h*.
+
+You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
+while Macintosh keyboard cable is *straight*.
+
+[![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg)
+
+In this pic:
+
+1. `GND`(Black)
+2. `CLOCK`(Red)
+3. `DATA`(Green)
+4. `+5V`(Yellow)
+
+Not that wire colors may vary in your cable.
+
+
+### Pinout
+- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
+- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
+
+![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
+
+
+### Pull-up Registor
+You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
+when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
+In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
+
+
+
+Building Frimware
+-----------------
+To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
+You can edit *Makefile* and *config.h* to change compile options and pin configuration.
+
+    $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
+    $ cd m0110_usb
+    $ make
+
+and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
+
+
+
+Keymap
+------
+You can change keymaps by editing *keymap.c*.
+
+### M0110
+#### *Default*
+    ,---------------------------------------------------------.
+    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs|
+    |---------------------------------------------------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \|
+    |---------------------------------------------------------|
+    |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return|
+    |---------------------------------------------------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   |
+    `---------------------------------------------------------'
+         |Ctr|Alt |         Space               |Gui |Ctr|
+         `-----------------------------------------------'
+#### *HHKB/WASD Layer*
+    ,---------------------------------------------------------.
+    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet|
+    |---------------------------------------------------------|
+    |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |   |Ins|
+    |---------------------------------------------------------|
+    |Fn0   |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return|
+    |---------------------------------------------------------|
+    |Shift   |End|   |PgD|   |VoD|VoU|Mut|End|PgD|Dow|Shift   |
+    `---------------------------------------------------------'
+         |Ctr|Alt |         Space               |Gui |Ctr|
+         `-----------------------------------------------'
+
+### M0110A
+#### *Default*
+    ,---------------------------------------------------------. ,---------------.
+    |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Gui|  =|  /|  *|
+    |---------------------------------------------------------| |---------------|
+    |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+    |-----------------------------------------------------'   | |---------------|
+    |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+    |---------------------------------------------------------| |---------------|
+    |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+    |---------------------------------------------------------| |-----------|Ent|
+    |Ctrl |Alt    |         Space             |  \|Lft|Rgt|Dn | |      0|  .|   |
+    `---------------------------------------------------------' `---------------'
+#### *HHKB/WASD/mousekey  Layer*
+    ,---------------------------------------------------------. ,---------------.
+    |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2|
+    |---------------------------------------------------------| |---------------|
+    |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |   |   | |MwD|McU|MwU|MwU|
+    |-----------------------------------------------------'   | |---------------|
+    |Fn0   |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD|
+    |---------------------------------------------------------| |---------------|
+    |Shift   |End|   |PgD|   |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR|   |
+    |---------------------------------------------------------| |-----------|Mb2|
+    |Ctrl |Alt    |         Space             |Ins|Lft|Rgt|Dn | |    Mb1|Mb3|   |
+    `---------------------------------------------------------' `---------------'
+
+
+
+Debug
+-----
+You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
+
+The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help.
+These function is totally undocumented, tentative, inconsistent and buggy.
diff --git a/converter/m0110_usb/config.h b/converter/m0110_usb/config.h
new file mode 100644
index 0000000000..4563d6da54
--- /dev/null
+++ b/converter/m0110_usb/config.h
@@ -0,0 +1,61 @@
+/*
+Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0110
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         M0110 keyboard converter
+#define DESCRIPTION     convert M0110 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 14
+#define MATRIX_COLS 8
+
+/* Locking Caps Lock support */
+//#define MATRIX_HAS_LOCKING_CAPS
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 192
+#endif
+
+
+/* ports */
+#define M0110_CLOCK_PORT        PORTF
+#define M0110_CLOCK_PIN         PINF
+#define M0110_CLOCK_DDR         DDRF
+#define M0110_CLOCK_BIT         0
+#define M0110_DATA_PORT         PORTF
+#define M0110_DATA_PIN          PINF
+#define M0110_DATA_DDR          DDRF
+#define M0110_DATA_BIT          1
+
+#endif
diff --git a/converter/m0110_usb/doc/m0110.jpg b/converter/m0110_usb/doc/m0110.jpg
new file mode 100644
index 0000000000..ef9a123abc
--- /dev/null
+++ b/converter/m0110_usb/doc/m0110.jpg
diff --git a/converter/m0110_usb/doc/teensy.jpg b/converter/m0110_usb/doc/teensy.jpg
new file mode 100644
index 0000000000..96e93e7e24
--- /dev/null
+++ b/converter/m0110_usb/doc/teensy.jpg
diff --git a/converter/m0110_usb/keymap.c b/converter/m0110_usb/keymap.c
new file mode 100644
index 0000000000..b5cdd300bf
--- /dev/null
+++ b/converter/m0110_usb/keymap.c
@@ -0,0 +1,214 @@
+/*
+Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+/* M0110A Support was contributed by skagon@github */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keyboard.h"
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+#define KEYMAP( \
+    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
+    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,      K59,K5B,K5C,K4E, \
+    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,    K24,  K56,K57,K58,K66, \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,        K4D,  K53,K54,K55,K4C, \
+    K3A,K37,            K31,            K34,K2A,K46,K42,K48,  K52,    K41      \
+) { \
+    { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_NO,    KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO,    KB_NO,    KB_##K37 }, \
+    { KB_##K38, KB_##K39, KB_##K3A, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_##K41, KB_##K42, KB_NO,    KB_NO,    KB_NO,    KB_##K46, KB_##K47 }, \
+    { KB_##K48, KB_NO,    KB_NO,    KB_NO,    KB_##K4C, KB_##K4D, KB_##K4E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_NO,    KB_##K5B, KB_##K5C, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_##K62, KB_NO,    KB_NO,    KB_NO,    KB_##K66, KB_NO    }, \
+    { KB_##K68, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K6D, KB_NO,    KB_NO    }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+#ifndef HASU
+    1,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+#else
+    1,              // Fn0
+    2,              // Fn1
+    3,              // Fn2
+    1,              // Fn3
+    2,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+#endif
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+#ifndef HASU
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+#else
+    KB_ENTER,       // Fn0
+    KB_SCOLON,      // Fn1
+    KB_SLASH,       // Fn2
+    KB_UP,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+#endif
+};
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 
+     * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
+     * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
+     * on the M0110A, but since it generates a unique scan code which is not used for some other key in
+     * the M0110A, they are totally interchangeable.  In fact, the M0110A is functionally (almost)
+     * identical to the combination of the M0110 along with the M0120 keypad. The only difference
+     * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
+     * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
+     * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
+     * substituted the [comma] key with the [=] key, however its scancode is the same.
+     *
+     * Default:
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Gui|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+     * |---------------------------------------------------------| |-----------|Ent|
+     * |Ctrl |Alt    |         Space         |Gui|  \|Lft|Rgt|Dn | |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
+     *
+     * HHKB/WASD/Mouse Layer(Fn0):
+     * ,---------------------------------------------------------. ,---------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2|
+     * |---------------------------------------------------------| |---------------|
+     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|   | |MwD|McU|MwU|MwU|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Fn0   |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |End|   |PgD|   |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR|   |
+     * |---------------------------------------------------------| |-----------|Mb2|
+     * |Ctrl |Alt    |         Space        |Gui |  \|Lft|Rgt|Dn | |    Mb1|Mb3|   |
+     * `---------------------------------------------------------' `---------------'
+     * Mb: Mouse Button / Mc: Mouse Cursor / Mw: Mouse Wheel
+     *
+     * NOTE: M0110 has no arrow and keypad keys.
+     * NOTE: \ is located next to ] on M0110.
+     * NOTE: Gui between Space and \ is Enter on M0110 not exists on M0110A.
+     * NOTE: LShift and RShift are logically same key. (M0110, M0110A)
+     * NOTE: LOption and ROption are logically same key. (M0110)
+     */
+#ifndef HASU
+    KEYMAP(
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    LGUI,EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
+    FN0, A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
+    LCTL,LALT,               SPC,                LGUI,BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+    // HHKB & WASD
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,BTN1,BTN3,BTN2,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,           WH_D,MS_U,WH_U,WH_U,
+    FN0, LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     ENT,     MS_L,MS_D,MS_R,WH_D,
+    LSFT,END, NO,  PGDN,NO,  VOLD,VOLU,MUTE,END, PGDN,DOWN,          UP,      WH_L,MS_D,WH_R,BTN2,
+    LCTL,LALT,               SPC,                LGUI,INS, LEFT,RGHT,DOWN,    BTN1,     BTN3
+    ),
+#else
+    // hasu's keymap(To enable this use 'make hasu' to add option flag: EXTRAFLAGS=-DHASU)
+    KEYMAP(
+    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    LGUI,EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN1, QUOT,     FN0,     P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN2,           FN3,     P1,  P2,  P3,  PENT,
+    FN4, LALT,               SPC,                LGUI,BSLS,LEFT,RGHT,DOWN,    LGUI,     PDOT
+    ),
+    // HHKB & WASD
+    KEYMAP(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,           P7,  P8,  P9,  PMNS,
+    LCTL,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN0,     P4,  P5,  P6,  PPLS,
+    LSFT,END, NO,  PGDN,NO,  VOLD,VOLU,MUTE,END, PGDN,DOWN,          FN3,     P1,  P2,  P3,  PENT,
+    LCTL,LALT,               SPC,                LGUI,INS, LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+    // vi mousekeys
+    KEYMAP(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,NO,  NO,  NO,  NO,  NO,  WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,           P7,  P8,  P9,  PMNS,
+    NO,  VOLD,VOLU,MUTE,NO,  NO,  MS_L,MS_D,MS_U,MS_R,FN1, NO,       ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,NO,  NO,  NO,  NO,  BTN3,BTN2,BTN1,NO,  NO,  NO,            UP,      P1,  P2,  P3,  PENT,
+    FN4, LALT,               BTN1,               LGUI,NO,  LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+    // vi cusorkeys
+    KEYMAP(
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, PSCR,SLCK,PAUS,         P7,  P8,  P9,  PMNS,
+    NO,  NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN2,           UP,      P1,  P2,  P3,  PENT,
+    LCTL,LALT,               SPC,                LGUI,INS, LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+#endif
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/m0110_usb/led.c b/converter/m0110_usb/led.c
new file mode 100644
index 0000000000..f76545f0ba
--- /dev/null
+++ b/converter/m0110_usb/led.c
@@ -0,0 +1,24 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/converter/m0110_usb/matrix.c b/converter/m0110_usb/matrix.c
new file mode 100644
index 0000000000..1ca6894c44
--- /dev/null
+++ b/converter/m0110_usb/matrix.c
@@ -0,0 +1,169 @@
+/*
+Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "host.h"
+#include "led.h"
+#include "m0110.h"
+#include "matrix.h"
+
+
+#define CAPS        0x39
+#define CAPS_BREAK  (CAPS | 0x80)
+#define ROW(key)    ((key)>>3&0x0F)
+#define COL(key)    ((key)&0x07)
+
+
+static bool is_modified = false;
+
+// matrix state buffer(1:on, 0:off)
+static uint8_t *matrix;
+static uint8_t _matrix0[MATRIX_ROWS];
+
+static void register_key(uint8_t key);
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    print_enable = true;
+    debug_enable = true;
+    debug_matrix = false;
+    debug_keyboard = false;
+    debug_mouse = false;
+    print("debug enabled.\n");
+
+    m0110_init();
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) _matrix0[i] = 0x00;
+    matrix = _matrix0;
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint8_t key;
+
+    is_modified = false;
+    key = m0110_recv_key();
+
+#ifdef MATRIX_HAS_LOCKING_CAPS
+    // Send Caps key up event
+    if (matrix_is_on(ROW(CAPS), COL(CAPS))) {
+        is_modified = true;
+        register_key(CAPS_BREAK);
+    }
+#endif
+    if (key == M0110_NULL) {
+        return 0;
+    } else if (key == M0110_ERROR) {
+        return 0;
+    } else {
+#ifdef MATRIX_HAS_LOCKING_CAPS    
+        if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
+            // CAPS LOCK on:
+            // Ignore LockingCaps key down event
+            if (key == CAPS) return 0;
+            // Convert LockingCaps key up event into down event
+            if (key == CAPS_BREAK) key = CAPS;
+        } else {
+            // CAPS LOCK off:
+            // Ignore LockingCaps key up event
+            if (key == CAPS_BREAK) return 0;
+        }
+#endif        
+        is_modified = true;
+        register_key(key);
+    }
+
+    if (debug_enable) {
+        print("["); phex(key); print("]\n");
+    }
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}
+
+inline
+static void register_key(uint8_t key)
+{
+    if (key&0x80) {
+        matrix[ROW(key)] &= ~(1<<COL(key));
+    } else {
+        matrix[ROW(key)] |=  (1<<COL(key));
+    }
+}
diff --git a/converter/news_usb/Makefile.pjrc b/converter/news_usb/Makefile.pjrc
new file mode 100644
index 0000000000..376133ad5e
--- /dev/null
+++ b/converter/news_usb/Makefile.pjrc
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = news_usb_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	news.c
+
+CONFIG_H = config_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/news_usb/config_pjrc.h b/converter/news_usb/config_pjrc.h
new file mode 100644
index 0000000000..e9cf7dedb6
--- /dev/null
+++ b/converter/news_usb/config_pjrc.h
@@ -0,0 +1,66 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5021
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         SONY NEWS keyboard converter
+#define DESCRIPTION     converts SONY NEWS protocol into USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 16  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* Asynchronous USART
+ * 8-data bit, non parity, 1-stop bit, no flow control
+ */
+#ifdef __AVR_ATmega32U4__
+#   define NEWS_KBD_RX_VECT        USART1_RX_vect
+#   define NEWS_KBD_RX_DATA        UDR1
+#   define NEWS_KBD_RX_BAUD        9600
+#   define NEWS_KBD_RX_UBBR        ((F_CPU/(16UL*NEWS_KBD_RX_BAUD))-1)
+#   define NEWS_KBD_RX_INIT()      do { \
+        UBRR1L = (uint8_t) NEWS_KBD_RX_UBBR; \
+        UBRR1H = (uint8_t) (NEWS_KBD_RX_UBBR>>8); \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
+    } while(0)
+#else
+#   error "USART configuration is needed."
+#endif
+
+#endif
diff --git a/converter/news_usb/keymap.c b/converter/news_usb/keymap.c
new file mode 100644
index 0000000000..4bd556ba09
--- /dev/null
+++ b/converter/news_usb/keymap.c
@@ -0,0 +1,125 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+// Following macros help you to define a keymap with the form of actual keyboard layout.
+
+/* SONY NEWS NWP-5461 */
+#define KEYMAP( \
+    K7A,    K01,K02,K03,K04,K05,  K06,K07,K08,K09,K0A,  K68,K69,          K64,K65,K52, \
+    K0B,K0C,K0D,K0E,K0F,K10,K11,K12,K13,K14,K15,K16,K17,K18,K19, K6A, K4B,K4C,K4D,K4E, \
+    K1A,K1B,K1C,K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,     K6B, K4F,K50,K51,K56, \
+    K28,K29,K2A,K2B,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34,    K35, K6C, K53,K54,K55,K5A, \
+    K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,        K42, K6D, K57,K59,K58,     \
+    K43,K44,K45,        K46,        K47,            K48,K49,K4A, K6E, K66,K5B,K5C,K5D  \
+) { \
+    { KB_NO,    KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K64, KB_##K65, KB_##K66, KB_NO    }, \
+    { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,   }, \
+    { KB_NO,    KB_NO,    KB_##K7A, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }  \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,------------------------, ,------------------------. ,---------.
+     * |Pow|   | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10| | F11| F12| ,-----------.
+     * `---'   `------------------------' `------------------------' `---------' |  *|  /|  +|
+     * ,-------------------------------------------------------------. ,---. ,---------------|
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  BS | |Hlp| |  7|  8|  9|  -|
+     * |-------------------------------------------------------------| |---| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Del|   | |Ins| |  4|  5|  6|  ,|
+     * |---------------------------------------------------------'   | |---| |---------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  `|Return| |Clr| |  1|  2|  3|   |
+     * |-------------------------------------------------------------| |---| |-----------|Ent|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|   |Shift   | |PgU| |  0|  .| Up|   |
+     * |-------------------------------------------------------------| |---| |---------------|
+     * |Alt  |Gui |Alt |         Space     |          |Gui|App|Ctrl  | |PgD| |Tab|Lef|Dow|Rig|
+     * `-------------------------------------------------------------' `---' `---------------'
+     */
+    KEYMAP(
+    PWR,      F1,  F2,  F3,  F4,  F5,       F6,  F7,  F8,  F9,  F10,      F11, F12,            PAST,PSLS,PPLS,
+    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,BSPC,   HELP,   P7,  P8,  P9,  PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,DEL,         INS,    P4,  P5,  P6,  PCMM,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,GRV,      ENT,    CLR,    P1,  P2,  P3,  PENT,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RO,            RSFT,   PGUP,   P0,  PDOT,UP,
+    LCTL,LGUI,LALT,          SPC,      ERAS,                    RALT,RGUI,RCTL,   PGDN,   TAB, LEFT,DOWN,RGHT
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/news_usb/led.c b/converter/news_usb/led.c
new file mode 100644
index 0000000000..51e601318a
--- /dev/null
+++ b/converter/news_usb/led.c
@@ -0,0 +1,26 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "news.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    // not supported now
+}
diff --git a/converter/news_usb/matrix.c b/converter/news_usb/matrix.c
new file mode 100644
index 0000000000..bf363e7d9b
--- /dev/null
+++ b/converter/news_usb/matrix.c
@@ -0,0 +1,141 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "news.h"
+#include "matrix.h"
+
+
+/*
+ * Matrix Array usage:
+ *
+ * ROW: 16
+ * COL:8
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|00 ... 07|
+ *  1|08 ... 0F|
+ *  :|   ...   |
+ *  :|   ...   |
+ *  E|70 ... 77|
+ *  F|78 ... 7F|
+ *   +---------+
+ *
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      ((code>>3)&0xF)
+#define COL(code)      (code&0x07)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    news_init();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    is_modified = false;
+
+    uint8_t code;
+    code = news_recv();
+    if (code == 0) {
+        return 0;
+    }
+
+    phex(code); print(" ");
+    if (code&0x80) {
+        // break code
+        if (matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] &= ~(1<<COL(code));
+            is_modified = true;
+        }
+    } else {
+        // make code
+        if (!matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] |=  (1<<COL(code));
+            is_modified = true;
+        }
+    }
+    return code;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}
diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
new file mode 100644
index 0000000000..0bba191a38
--- /dev/null
+++ b/converter/ps2_usb/Makefile
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = ps2_usb_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	ps2.c
+
+CONFIG_H = config_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.pjrc_usart b/converter/ps2_usb/Makefile.pjrc_usart
new file mode 100644
index 0000000000..3dad7e2f8c
--- /dev/null
+++ b/converter/ps2_usb/Makefile.pjrc_usart
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = ps2_usb_pjrc_usart
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	ps2_usart.c
+
+CONFIG_H = config_pjrc_usart.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.vusb b/converter/ps2_usb/Makefile.vusb
new file mode 100644
index 0000000000..4d5240c309
--- /dev/null
+++ b/converter/ps2_usb/Makefile.vusb
@@ -0,0 +1,92 @@
+#
+# Makefile for V-USB
+#
+
+
+# Target file name (without extension).
+TARGET = ps2_usb_vusb
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	ps2_usart.c
+
+CONFIG_H = config_vusb.h
+
+
+# V-USB debug level: To use ps2_usart.c level must be 0
+# ps2_usart.c requires USART to receive PS/2 signal.
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+#MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+MCU = atmega168
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 20000000
+
+
+# Build Options
+#   comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+NO_UART = yes		# UART is unavailable
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+
+include $(TOP_DIR)/protocol/vusb.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/ps2_usb/README b/converter/ps2_usb/README
new file mode 100644
index 0000000000..c10393e5e7
--- /dev/null
+++ b/converter/ps2_usb/README
@@ -0,0 +1,116 @@
+PS/2 to USB keyboard converter
+==============================
+This firmware converts PS/2 keyboard protocol to USB and for now supports only Scan Code Set 2.
+This will works on USB AVR(ATMega32U4, AT90USB) or V-USB.
+
+
+Features
+--------
+Mouse keys
+    You can emulates mouse move and button click using keyboard.
+System/Media control
+    You can sends Power event, Volume down/up and Mute.
+USB NKRO(actually 120KRO+8Modifiers)
+    You can tolggles NKRO feature.
+Keymap customization
+    You can customize keymaps easily by editing source code. See keymap.c.
+
+
+PS/2 signal handling implementations
+------------------------------------
+Following three methods are used to implement PS/2 signal handling.
+a. Simple and stupid wait & read loop(intensive use of cycles)
+    This is implemented with (expected) portable C code for reference. See ps2.c.
+b. Interrupt driven
+    See ps2_intr.c
+c. Using USART hardware module(no cycle needed)
+    This uses AVR USART function to recevie PS/2 signal and be used in V-USB converter.
+    See ps2_usart.c.
+
+
+Build Converter
+---------------
+Connect PS/2 keyboard into Teensy with 4 lines(Vcc, GND, Data, Clock).
+For a. Simple and stupid and b. Interrupt implementaion:
+    By default Clock is on PF0 and Data on PF1.
+    You can change this pin configuration by editing config_pjrc.h.
+    In this photo Vcc is yellow, GND is green, Data is red and Clock is black.
+    http://img17.imageshack.us/img17/7243/201101181933.jpg
+For c. USART implementation:
+    In case of Teensny(ATMega32u4) CLock is on PD5 and Data on PD2.
+
+
+Build Frimware
+--------------
+1. Edit Makefile for build options and MCU setting.
+    Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
+2. make
+    Just type 'make' in a terminal.
+    Use '-f Makefile.pjrc_intr' option to use b. Interrupt.
+    Use '-f Makefile.pjrc_usart' option to use c. USART.
+    Use '-f Makefile.vusb' option to build V-USB converter.
+3. program with Teensy Loader.
+    http://www.pjrc.com/teensy/loader.html
+
+
+Demonstration of Features
+-------------------------
+In default configuration, you can try several keymaps, mousekeys and USB NKRO.
+Use following magic key combinations to enable some features.
+
+keymaps and NKRO:
+    Magic+0:    Qwerty with mousekeys(default)
+    Magic+1:    Qwerty without mousekeys
+    Magic+2:    Colemak
+    Magic+3:    Dvorak
+    Magic+4:    Workman
+    Magic+N:    toggles NKRO/6KRO(6KRO by default)
+    Magic+Esc:  sends Power Event(Power button)
+
+    where Magic=(LShift+RShift) or (LControl+RShift)
+
+Fn layer function:
+    Fn0+(hjkl): Mousekey move(vi cursor like)
+    Fn0+(yuio): Mouse wheel(left,down,up,right)
+    Fn0+space:  Mouse left button
+    Fn0+(mnb):  Mouse buttons(m=left, n=right, b=middle)
+    Fn0+(zxc):  Media control(Volup, Voldown, Mute)
+    Fn1+(hjkl): Cursor move(vi cursor like)
+    Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End)
+
+    where Fn0=;, Fn1=/
+
+
+Keymap
+------
+You can change a keymap by editing code of keymap.c like following.
+How to define the keymap is probably obvious. You can find  key symbols in usb_keycodes.h.
+To define keymap layer switching may needs a bit of your effort at this time.
+
+    /* Default Layer: plain keymap
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
+     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `-----------------------------------------------------------' `-----------' `---------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,          PWR, F13, F14,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+
+EOF
diff --git a/converter/ps2_usb/README.vusb b/converter/ps2_usb/README.vusb
new file mode 100644
index 0000000000..c92871bcdd
--- /dev/null
+++ b/converter/ps2_usb/README.vusb
@@ -0,0 +1,37 @@
+V-USB Support
+=============
+You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
+The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
+
+To build a firmware use Makefile.vusb instead of Makefile.
+
+
+Circuit
+-------
+                +---+   +---------------+
+USB            GND  |   |   ATmega168   |
+===                 C3  |               |
+5V <-------+--------+---|Vcc,AVCC       |        PS/2
+           R1           |               |        ====
+D- <----+--+-----R2-----|INT1        RXD|------->DATA
+D+ <----|---+----R3-----|INT0        XCK|------->CLOCK
+        Z1  Z2          |               |      ->5V
+GND<----+---+--+--+-----|GND            |      ->GND
+               |  |     |               |
+               |  C2-+--|XTAL1          |
+               |     X1 |               |
+               +--C3-+--|XTAL2          |
+                        +---------------+
+R1:     1.5K Ohm
+R2,R3:  68 Ohm
+Z1,Z2:  Zenner 3.6V
+C1,C2:  22pF
+C3:     0.1uF
+X1:     Crystal 20MHz(16MHz/12MHz)
+
+
+This is my V-USB converter on breadboard.
+[IMG]http://i.imgur.com/8jJCZl.jpg[/IMG]
+
+
+EOF
diff --git a/converter/ps2_usb/config_pjrc.h b/converter/ps2_usb/config_pjrc.h
new file mode 100644
index 0000000000..883ffab275
--- /dev/null
+++ b/converter/ps2_usb/config_pjrc.h
@@ -0,0 +1,59 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6512
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2 keyboard converter
+#define DESCRIPTION     convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTF
+#define PS2_CLOCK_PIN   PINF
+#define PS2_CLOCK_DDR   DDRF
+#define PS2_CLOCK_BIT   0
+#define PS2_DATA_PORT   PORTF
+#define PS2_DATA_PIN    PINF
+#define PS2_DATA_DDR    DDRF
+#define PS2_DATA_BIT    1
+
+#endif
diff --git a/converter/ps2_usb/config_pjrc_usart.h b/converter/ps2_usb/config_pjrc_usart.h
new file mode 100644
index 0000000000..83ddbf7703
--- /dev/null
+++ b/converter/ps2_usb/config_pjrc_usart.h
@@ -0,0 +1,91 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6513
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2 keyboard converter(USART)
+#define DESCRIPTION     convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   5
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    2
+
+
+// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
+// set DDR of CLOCK as input to be slave
+#define PS2_USART_INIT() do {   \
+    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+    UCSR1C = ((1 << UMSEL10) |  \
+              (3 << UPM10)   |  \
+              (0 << USBS1)   |  \
+              (3 << UCSZ10)  |  \
+              (0 << UCPOL1));   \
+    UCSR1A = 0;                 \
+    UBRR1H = 0;                 \
+    UBRR1L = 0;                 \
+} while (0)
+#define PS2_USART_RX_INT_ON() do {  \
+    UCSR1B = ((1 << RXCIE1) |       \
+              (1 << RXEN1));        \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+    UCSR1B = (1 << RXEN1);          \
+} while (0)
+#define PS2_USART_OFF() do {    \
+    UCSR1C = 0;                 \
+    UCSR1B &= ~((1 << RXEN1) |  \
+                (1 << TXEN1));  \
+} while (0)
+#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA       UDR1
+#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT       USART1_RX_vect
+
+#endif
diff --git a/converter/ps2_usb/config_vusb.h b/converter/ps2_usb/config_vusb.h
new file mode 100644
index 0000000000..afd2f7911f
--- /dev/null
+++ b/converter/ps2_usb/config_vusb.h
@@ -0,0 +1,133 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x2233
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2 keyboard converter
+#define DESCRIPTION     convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   4
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+
+
+// Synchronous USART is used to receive data from keyboard.
+// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
+// NOTE: This is recomended strongly if you use V-USB library.
+#define PS2_USE_USART
+
+// External or Pin Change Interrupt is used to receive data from keyboard.
+// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
+//#define PS2_USE_INT
+
+
+#ifdef PS2_USE_USART
+// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
+// set DDR of CLOCK as input to be slave
+#define PS2_USART_INIT() do {   \
+    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+    UCSR0C = ((1 << UMSEL00) |  \
+              (3 << UPM00)   |  \
+              (0 << USBS0)   |  \
+              (3 << UCSZ00)  |  \
+              (0 << UCPOL0));   \
+    UCSR0A = 0;                 \
+    UBRR0H = 0;                 \
+    UBRR0L = 0;                 \
+} while (0)
+#define PS2_USART_RX_INT_ON() do {  \
+    UCSR0B = ((1 << RXCIE0) |       \
+              (1 << RXEN0));        \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+    UCSR0B = (1 << RXEN0);          \
+} while (0)
+#define PS2_USART_OFF() do {    \
+    UCSR0C = 0;                 \
+    UCSR0B &= ~((1 << RXEN0) |  \
+                (1 << TXEN0));  \
+} while (0)
+#define PS2_USART_RX_READY      (UCSR0A & (1<<RXC0))
+#define PS2_USART_RX_DATA       UDR0
+#define PS2_USART_ERROR         (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
+#define PS2_USART_RX_VECT       USART_RX_vect
+#endif
+
+
+#ifdef PS2_USE_INT
+/* INT1
+#define PS2_INT_INIT()  do {    \
+    EICRA |= ((1<<ISC11) |      \
+              (0<<ISC10));      \
+} while (0)
+#define PS2_INT_ON()  do {      \
+    EIMSK |= (1<<INT1);         \
+} while (0)
+#define PS2_INT_OFF() do {      \
+    EIMSK &= ~(1<<INT1);        \
+} while (0)
+#define PS2_INT_VECT    INT1_vect
+*/
+
+/* PCINT20 */
+#define PS2_INT_INIT()  do {    \
+    PCICR  |= (1<<PCIE2);       \
+} while (0)
+#define PS2_INT_ON()  do {      \
+    PCMSK2 |= (1<<PCINT20);     \
+} while (0)
+#define PS2_INT_OFF() do {      \
+    PCMSK2 &= ~(1<<PCINT20);    \
+    PCICR  &= ~(1<<PCIE2);      \
+} while (0)
+#define PS2_INT_VECT    PCINT2_vect
+#endif
+
+#endif
diff --git a/converter/ps2_usb/keymap.c b/converter/ps2_usb/keymap.c
new file mode 100644
index 0000000000..f1e34a929a
--- /dev/null
+++ b/converter/ps2_usb/keymap.c
@@ -0,0 +1,379 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/* 
+ * Keymap for PS/2 keyboard
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+// Following macros help you to define a keymap with the form of actual keyboard layout.
+
+/* US layout plus all other various keys */
+#define KEYMAP_ALL( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
+                                                                                            \
+    K61,                     /* for European ISO */                                         \
+    K51, K13, K6A, K64, K67, /* for Japanese JIS */                                         \
+    K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */                \
+    KB7, KBF, KDE,           /* System Power, Sleep, Wake */                                \
+    KA3, KB2, KA1,           /* Mute, Volume Up, Volume Down */                             \
+    KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */                \
+    KC8, KAB, KC0,           /* Mail, Calculator, My Computer */                            \
+    K90, KBA, KB8, KB0,      /* WWW Search, Home, Back, Forward */                          \
+    KA8, KA0, K98            /* WWW Stop, Refresh, Favorites */                             \
+) { \
+    { KB_NO,    KB_##K01, KB_NO,    KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO    }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_NO    }, \
+    { KB_##K18, KB_NO,    KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO    }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO    }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO    }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO    }, \
+    { KB_##K38, KB_NO,    KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO    }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO    }, \
+    { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO    }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_NO,    KB_##K54, KB_##K55, KB_NO,    KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO,    KB_##K5D, KB_NO,    KB_##K5F }, \
+    { KB_NO,    KB_##K61, KB_NO,    KB_NO,    KB_##K64, KB_NO,    KB_##K66, KB_##K67 }, \
+    { KB_NO,    KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K83, KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##K90, KB_##K91, KB_NO,    KB_NO,    KB_##K94, KB_##K95, KB_NO,    KB_NO    }, \
+    { KB_##K98, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K9F }, \
+    { KB_##KA0, KB_##KA1, KB_NO,    KB_##KA3, KB_NO,    KB_NO,    KB_NO,    KB_##KA7 }, \
+    { KB_##KA8, KB_NO,    KB_NO,    KB_##KAB, KB_NO,    KB_NO,    KB_NO,    KB_##KAF }, \
+    { KB_##KB0, KB_NO,    KB_##KB2, KB_NO,    KB_##KB4, KB_NO,    KB_NO,    KB_##KB7 }, \
+    { KB_##KB8, KB_NO,    KB_##KBA, KB_##KBB, KB_NO,    KB_NO,    KB_NO,    KB_##KBF }, \
+    { KB_##KC0, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##KC8, KB_NO,    KB_##KCA, KB_NO,    KB_NO,    KB_##KCD, KB_NO,    KB_NO    }, \
+    { KB_##KD0, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_##KDA, KB_NO,    KB_NO,    KB_NO,    KB_##KDE, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_##KE9, KB_NO,    KB_##KEB, KB_##KEC, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO,    KB_##KF4, KB_##KF5, KB_NO,    KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_##KFA, KB_NO,    KB_##KFC, KB_##KFD, KB_##KFE, KB_NO    }, \
+}
+
+/* US layout */
+#define KEYMAP( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
+) \
+KEYMAP_ALL( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
+                                                                                            \
+    NUBS,                                                                                   \
+    RO, KANA, JYEN, HENK, MHEN,                                                             \
+    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
+    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
+    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
+    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
+    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
+    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
+    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
+)
+
+/* ISO layout */
+#define KEYMAP_ISO( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,     KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A,               K6B,K73,K74,K79, \
+    K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
+) \
+KEYMAP_ALL( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
+                                                                                            \
+    K61,                                                                                    \
+    RO, KANA, JYEN, HENK, MHEN,                                                             \
+    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
+    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
+    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
+    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
+    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
+    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
+    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
+)
+
+/* JIS layout */
+#define KEYMAP_JIS( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,         KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,         KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,    K67,K29,K64,K13,            K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
+) \
+KEYMAP_ALL( \
+    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
+    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
+    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
+    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
+                                                                                            \
+    NUBS,                                                                                   \
+    K51, K13, K6A, K64, K67,                                                                \
+    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
+    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
+    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
+    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
+    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
+    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
+    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
+)
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    5,              // Fn0
+    6,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_SCLN,        // Fn0
+    KB_SLSH,        // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode.
+// See usb_keycodes.h for USB keycodes. You should omit a 'KB_' prefix of USB keycodes in keymap macro.
+// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS.
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
+     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `-----------------------------------------------------------' `-----------' `---------------'
+     * ; = Fn0(to Layer 5)
+     * / = Fn1(to Layer 6)
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN0, QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1,           RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 1: plain Qwerty without layer switching
+     * ,-----------------------------------------------------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 2: Colemak http://colemak.com
+     * ,-----------------------------------------------------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  W|  F|  P|  G|  J|  L|  U|  Y|  ;|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |BackSp|  A|  R|  S|  T|  D|  H|  N|  E|  I|  O|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  K|  M|  ,|  ,|  /|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
+     * `----------------------------------------------------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   F,   P,   G,   J,   L,   U,   Y,   SCLN,LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    BSPC,A,   R,   S,   T,   D,   H,   N,   E,   I,   O,   QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   K,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard
+     * ,-----------------------------------------------------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  [|  ]|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |  '|  ,|  .|  P|  Y|  F|  G|  C|  R|  L|  /|  =|    \|
+     * |-----------------------------------------------------------|
+     * |BackSp|  A|  O|  E|  U|  I|  D|  H|  T|  N|  S|  -|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  ;|  Q|  J|  K|  X|  B|  M|  Wl  V|  Z|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   LBRC,RBRC,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, QUOT,COMM,DOT, P,   Y,   F,   G,   C,   R,   L,   SLSH,EQL, BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,A,   O,   E,   U,   I,   D,   H,   T,   N,   S,   MINS,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,SCLN,Q,   J,   K,   X,   B,   M,   W,   V,   Z,             RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/
+     * ,-----------------------------------------------------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |  Q|  D|  R|  W|  B|  J|  F|  U|  P|  ;|  [|  ]|    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|  A|  S|  H|  T|  G|  Y|  N|  E|  O|  I|  '|Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |  Z|  X|  M|  C|  V|  K|  L|  ,|  ,|  /|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   D,   R,   W,   B,   J,   F,   U,   P,   SCLN,LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    BSPC,A,   S,   H,   T,   G,   Y,   N,   E,   O,   I,   QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   M,   C,   V,   K,   L,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 5: Mouse keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |McL|McD|McR|   |McL|McD|McU|McR|Fn0|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Mb1           |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
+     * Vo = Volume, Mut = Mute
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,  BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN0, NO,       ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          BTN1,                    RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 6: Cursor keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |Lef|Dow|Rig|   |Lef|Dow| Up|Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|Fn1|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,  NO,  NO,  BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,VOLD,VOLU,MUTE,NO,  NO,  HOME,PGDN,PGUP,END, FN1,           RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          SPC,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/ps2_usb/led.c b/converter/ps2_usb/led.c
new file mode 100644
index 0000000000..e448e84ec7
--- /dev/null
+++ b/converter/ps2_usb/led.c
@@ -0,0 +1,33 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    uint8_t ps2_led = 0;
+    if (usb_led &  (1<<USB_LED_SCROLL_LOCK))
+        ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+    if (usb_led &  (1<<USB_LED_NUM_LOCK))
+        ps2_led |= (1<<PS2_LED_NUM_LOCK);
+    if (usb_led &  (1<<USB_LED_CAPS_LOCK))
+        ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+    ps2_host_set_led(ps2_led);
+}
diff --git a/converter/ps2_usb/matrix.c b/converter/ps2_usb/matrix.c
new file mode 100644
index 0000000000..4187ea0601
--- /dev/null
+++ b/converter/ps2_usb/matrix.c
@@ -0,0 +1,452 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 2' is assigned into 256(32x8)cell matrix.
+ * Hmm, it is very sparse and not efficient :(
+ *
+ * Notes:
+ * Both 'Hanguel/English'(F1) and 'Hanja'(F2) collide with 'Delete'(E0 71) and 'Down'(E0 72).
+ * These two Korean keys need exceptional handling and are not supported for now. Sorry.
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|         |
+ *  :|   XX    | 00-7F for normal codes(without E0-prefix)
+ *  f|_________|
+ * 10|         |
+ *  :|  E0 YY  | 80-FF for E0-prefixed codes
+ * 1f|         |     (<YY>|0x80) is used as matrix position.
+ *   +---------+
+ *
+ * Exceptions:
+ * 0x83:    F7(0x83) This is a normal code but beyond  0x7F.
+ * 0xFC:    PrintScreen
+ * 0xFE:    Pause
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      (code>>3)
+#define COL(code)      (code&0x07)
+
+// matrix positions for exceptional keys
+#define F7             (0x83)
+#define PRINT_SCREEN   (0xFC)
+#define PAUSE          (0xFE)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    ps2_host_init();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    return;
+}
+
+/*
+ * PS/2 Scan Code Set 2: Exceptional Handling
+ *
+ * There are several keys to be handled exceptionally.
+ * The scan code for these keys are varied or prefix/postfix'd
+ * depending on modifier key state.
+ *
+ * Keyboard Scan Code Specification:
+ *     http://www.microsoft.com/whdc/archive/scancode.mspx
+ *     http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc
+ *
+ *
+ * 1) Insert, Delete, Home, End, PageUp, PageDown, Up, Down, Right, Left
+ *     a) when Num Lock is off
+ *     modifiers | make                      | break
+ *     ----------+---------------------------+----------------------
+ *     Ohter     |                    <make> | <break>
+ *     LShift    | E0 F0 12           <make> | <break>  E0 12
+ *     RShift    | E0 F0 59           <make> | <break>  E0 59
+ *     L+RShift  | E0 F0 12  E0 F0 59 <make> | <break>  E0 59 E0 12
+ *
+ *     b) when Num Lock is on
+ *     modifiers | make                      | break
+ *     ----------+---------------------------+----------------------
+ *     Other     | E0 12              <make> | <break>  E0 F0 12
+ *     Shift'd   |                    <make> | <break>
+ *
+ *     Handling: These prefix/postfix codes are ignored.
+ *
+ *
+ * 2) Keypad /
+ *     modifiers | make                      | break
+ *     ----------+---------------------------+----------------------
+ *     Ohter     |                    <make> | <break>
+ *     LShift    | E0 F0 12           <make> | <break>  E0 12
+ *     RShift    | E0 F0 59           <make> | <break>  E0 59
+ *     L+RShift  | E0 F0 12  E0 F0 59 <make> | <break>  E0 59 E0 12
+ *
+ *     Handling: These prefix/postfix codes are ignored.
+ *
+ *
+ * 3) PrintScreen
+ *     modifiers | make         | break
+ *     ----------+--------------+-----------------------------------
+ *     Other     | E0 12  E0 7C | E0 F0 7C  E0 F0 12
+ *     Shift'd   |        E0 7C | E0 F0 7C
+ *     Control'd |        E0 7C | E0 F0 7C
+ *     Alt'd     |           84 | F0 84
+ *
+ *     Handling: These prefix/postfix codes are ignored, and both scan codes
+ *               'E0 7C' and 84 are seen as PrintScreen.
+ *
+ * 4) Pause
+ *     modifiers | make(no break code)
+ *     ----------+--------------------------------------------------
+ *     Other     | E1 14 77 E1 F0 14 F0 77
+ *     Control'd | E0 7E E0 F0 7E
+ *
+ *     Handling: Both code sequences are treated as a whole.
+ *               And we need a ad hoc 'pseudo break code' hack to get the key off
+ *               because it has no break code.
+ *
+ */
+uint8_t matrix_scan(void)
+{
+
+    // scan code reading states
+    static enum {
+        INIT,
+        F0,
+        E0,
+        E0_F0,
+        // Pause
+        E1,
+        E1_14,
+        E1_14_77,
+        E1_14_77_E1,
+        E1_14_77_E1_F0,
+        E1_14_77_E1_F0_14,
+        E1_14_77_E1_F0_14_F0,
+        // Control'd Pause
+        E0_7E,
+        E0_7E_E0,
+        E0_7E_E0_F0,
+    } state = INIT;
+
+
+    is_modified = false;
+
+    // 'pseudo break code' hack
+    if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) {
+        matrix_break(PAUSE);
+    }
+
+    uint8_t code;
+    while ((code = ps2_host_recv())) {
+        switch (state) {
+            case INIT:
+                switch (code) {
+                    case 0xE0:
+                        state = E0;
+                        break;
+                    case 0xF0:
+                        state = F0;
+                        break;
+                    case 0xE1:
+                        state = E1;
+                        break;
+                    case 0x83:  // F7
+                        matrix_make(F7);
+                        state = INIT;
+                        break;
+                    case 0x84:  // Alt'd PrintScreen
+                        matrix_make(PRINT_SCREEN);
+                        state = INIT;
+                        break;
+                    default:    // normal key make
+                        if (code < 0x80) {
+                            matrix_make(code);
+                        } else {
+                            debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
+                        }
+                        state = INIT;
+                }
+                break;
+            case E0:    // E0-Prefixed
+                switch (code) {
+                    case 0x12:  // to be ignored
+                    case 0x59:  // to be ignored
+                        state = INIT;
+                        break;
+                    case 0x7E:  // Control'd Pause
+                        state = E0_7E;
+                        break;
+                    case 0xF0:
+                        state = E0_F0;
+                        break;
+                    default:
+                        if (code < 0x80) {
+                            matrix_make(code|0x80);
+                        } else {
+                            debug("unexpected scan code at E0: "); debug_hex(code); debug("\n");
+                        }
+                        state = INIT;
+                }
+                break;
+            case F0:    // Break code
+                switch (code) {
+                    case 0x83:  // F7
+                        matrix_break(F7);
+                        state = INIT;
+                        break;
+                    case 0x84:  // Alt'd PrintScreen
+                        matrix_break(PRINT_SCREEN);
+                        state = INIT;
+                        break;
+                    default:
+                    if (code < 0x80) {
+                        matrix_break(code);
+                    } else {
+                        debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+                    }
+                    state = INIT;
+                }
+                break;
+            case E0_F0: // Break code of E0-prefixed
+                switch (code) {
+                    case 0x12:  // to be ignored
+                    case 0x59:  // to be ignored
+                        state = INIT;
+                        break;
+                    default:
+                        if (code < 0x80) {
+                            matrix_break(code|0x80);
+                        } else {
+                            debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n");
+                        }
+                        state = INIT;
+                }
+                break;
+            // following are states of Pause
+            case E1:
+                switch (code) {
+                    case 0x14:
+                        state = E1_14;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            case E1_14:
+                switch (code) {
+                    case 0x77:
+                        state = E1_14_77;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            case E1_14_77:
+                switch (code) {
+                    case 0xE1:
+                        state = E1_14_77_E1;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            case E1_14_77_E1:
+                switch (code) {
+                    case 0xF0:
+                        state = E1_14_77_E1_F0;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            case E1_14_77_E1_F0:
+                switch (code) {
+                    case 0x14:
+                        state = E1_14_77_E1_F0_14;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            case E1_14_77_E1_F0_14:
+                switch (code) {
+                    case 0xF0:
+                        state = E1_14_77_E1_F0_14_F0;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            case E1_14_77_E1_F0_14_F0:
+                switch (code) {
+                    case 0x77:
+                        matrix_make(PAUSE);
+                        state = INIT;
+                        break;
+                    default:
+                        state = INIT;
+                }
+                break;
+            // Following are states of Control'd Pause
+            case E0_7E:
+                if (code == 0xE0)
+                    state = E0_7E_E0;
+                else
+                    state = INIT;
+                break;
+            case E0_7E_E0:
+                if (code == 0xF0)
+                    state = E0_7E_E0_F0;
+                else
+                    state = INIT;
+                break;
+            case E0_7E_E0_F0:
+                if (code == 0x7E)
+                    matrix_make(PAUSE);
+                state = INIT;
+                break;
+            default:
+                state = INIT;
+        }
+        phex(code);
+    }
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+
+inline
+static void matrix_make(uint8_t code)
+{
+    if (!matrix_is_on(ROW(code), COL(code))) {
+        matrix[ROW(code)] |= 1<<COL(code);
+        is_modified = true;
+    }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+    if (matrix_is_on(ROW(code), COL(code))) {
+        matrix[ROW(code)] &= ~(1<<COL(code));
+        is_modified = true;
+    }
+}
diff --git a/converter/ps2_usb/usbconfig.h b/converter/ps2_usb/usbconfig.h
new file mode 100644
index 0000000000..9038f1eb8c
--- /dev/null
+++ b/converter/ps2_usb/usbconfig.h
@@ -0,0 +1,378 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config_vusb.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      10
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x01
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     't', '.', 'm', '.', 'k', '.'
+#define USB_CFG_VENDOR_NAME_LEN 6
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
+#define USB_CFG_DEVICE_NAME_LEN 23
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+//#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+#endif /* __usbconfig_h_included__ */
diff --git a/converter/terminal_usb/Makefile.102_pjrc b/converter/terminal_usb/Makefile.102_pjrc
new file mode 100644
index 0000000000..e9d14e7a05
--- /dev/null
+++ b/converter/terminal_usb/Makefile.102_pjrc
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = terminal_usb_102_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap_102.c \
+	matrix.c \
+	led.c \
+	ps2.c
+
+CONFIG_H = config_102_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/terminal_usb/Makefile.122_pjrc b/converter/terminal_usb/Makefile.122_pjrc
new file mode 100644
index 0000000000..bec00510e5
--- /dev/null
+++ b/converter/terminal_usb/Makefile.122_pjrc
@@ -0,0 +1,58 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = terminal_usb_122_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap_122.c \
+	matrix.c \
+	led.c \
+	ps2.c
+
+CONFIG_H = config_122_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+#MOUSEKEY_ENABLE = yes	# Mouse keys
+#EXTRAKEY_ENABLE = yes	# Audio control and System control
+#NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/terminal_usb/README b/converter/terminal_usb/README
new file mode 100644
index 0000000000..1ce49f33dc
--- /dev/null
+++ b/converter/terminal_usb/README
@@ -0,0 +1,47 @@
+PS/2 to USB  keyboard converter for IBM terminal keyboard
+=========================================================
+It supports PS/2 Scan Code Set 3 and runs on Teensy, Teensy++ and boards withATMega32u4/AT90USB.
+I tested the converter only on Teensy with 1392595(102keys terminal keyboard),
+though, I think it will also work with 122keys boards.
+
+http://geekhack.org/showwiki.php?title=Island:27272
+
+
+CONNECTION
+----------
+Data: PD0
+Clock: PD1
+VCC and GND, of course.
+
+It is the same as Soarer's converter pin configuration.
+See RESOURCE for keyboard connector pin assign.
+
+
+
+BUILD
+-----
+Get source:
+$ git clone https://github.com/tmk/tmk_keyboard.git
+$ cd terminal_usb
+
+For 102keys:
+$ make -f Makefile.102_pjrc
+
+For 122keys(not tested):
+$ make -f Makefile.122_pjrc
+
+I used WinAVR 20100110 to develop and build.
+
+
+
+RESOURCE
+--------
+Soarer's Converter: http://geekhack.org/showwiki.php?title=Island:17458
+102keys(1392595): http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
+KbdBabel: http://www.kbdbabel.org/
+RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
+DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
+WinAVR: http://winavr.sourceforge.net/
+
+EOF
diff --git a/converter/terminal_usb/config_102_pjrc.h b/converter/terminal_usb/config_102_pjrc.h
new file mode 100644
index 0000000000..2dce04af7d
--- /dev/null
+++ b/converter/terminal_usb/config_102_pjrc.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6531
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2(Set3)-USB Keyboard converter(IBM 102keys)
+#define DESCRIPTION     USB converter for IBM Terminal Keyboard 102keys
+
+
+/* matrix size */
+#define MATRIX_ROWS 17  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL))  \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+
+#endif
diff --git a/converter/terminal_usb/config_122_pjrc.h b/converter/terminal_usb/config_122_pjrc.h
new file mode 100644
index 0000000000..43691bd71c
--- /dev/null
+++ b/converter/terminal_usb/config_122_pjrc.h
@@ -0,0 +1,58 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6532
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         PS/2(Set3)-USB Keyboard converter(IBM 122keys)
+#define DESCRIPTION     USB converter for IBM Terminal Keyboard 122keys
+
+
+/* matrix size */
+#define MATRIX_ROWS 17  // keycode bit: 3-0
+#define MATRIX_COLS 8   // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_RALT) | MOD_BIT(KB_RCTL))  \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* PS/2 lines */
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   1
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    0
+
+#endif
diff --git a/converter/terminal_usb/keymap_102.c b/converter/terminal_usb/keymap_102.c
new file mode 100644
index 0000000000..430570c47b
--- /dev/null
+++ b/converter/terminal_usb/keymap_102.c
@@ -0,0 +1,208 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/* 
+ * IBM Terminal keyboard 1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ *     8 bytes
+ *   +---------+
+ *  0|         |
+ *  :|         | 0x00-0x87
+ *  ;|         |
+ * 17|         |
+ *   +---------+
+ */
+#define KEYMAP( \
+    K08,    K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,      K57,K5F,K62,                   \
+                                                                                                 \
+    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66,  K67,K6E,K6F,  K76,K77,K7E,K84, \
+    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,    K5C,  K64,K65,K6D,  K6C,K75,K7D,K7C, \
+    K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K53,K5A,                K6B,K73,K74,K7B, \
+    K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K51,K59,      K63,      K69,K72,K7A,K79, \
+    K11,    K19,            K29,                    K39,    K58,  K61,K60,K6A,  K68,K70,K71,K78  \
+) { \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K07 }, \
+    { KB_##K08, KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_NO,    KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_NO,    KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_NO,    KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_NO,    KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_NO,    KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_NO,    KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+    { KB_NO,    KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_NO,    KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+    { KB_NO,    KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+    { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_##K84, KB_NO,    KB_NO,    KB_NO,   }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    1,              // Fn0
+    2,              // Fn1
+    3,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_SCLN,        // Fn0
+    KB_SLSH,        // Fn1
+    KB_ESC,         // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+     * `---'   `---------------' `---------------' `---------------' `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|BS | |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Retu|               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl|    |Alt |          Space              |Alt |    |Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `----'    `---------------------------------------'    `----' `-----------' `---------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,             PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,  INS, HOME,PGUP,  NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  DEL, END, PGDN,  P7,  P8,  P9,  PPLS,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN0, QUOT,     NUHS,ENT,                    P4,  P5,  P6,  PCMM,
+    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1,      RO,  FN2,        UP,         P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               SPC,                          RALT,     RCTL,  LEFT,DOWN,RGHT,  NO,  P0,  PDOT,NO
+    ),
+
+    /* 1: Mouse keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |McL|McD|McR|   |McL|McD|McU|McR|Fn0|   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |    |Alt |         Mb1                |Alt |    |Ctrl|
+     * `-----'    `--------------------------------------'    `----'
+     * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
+     * Vo = Volume, Mut = Mute
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, NO,  BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,       BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
+    LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN0, NO,       NO,  ENT,                         P4,  P5,  P6,  PCMM,
+    LSFT,NO,  VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE,     NO,  RSFT,          UP,           P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               BTN1,                         RALT,     RCTL,     LEFT,DOWN,RGHT,    NO,  P0,  PDOT,NO
+    ),
+
+    /* 2: Cursor keys
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
+     * |-----------------------------------------------------------|
+     * |Tab  |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End|   |   |   |    \|
+     * |-----------------------------------------------------------|
+     * |CapsLo|   |Lef|Dow|Rig|   |Lef|Dow| Up|Rig|   |   |Return  |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|Fn1|Shift     |
+     * |-----------------------------------------------------------|
+     * |Ctrl |    |Alt |         Space              |Alt |    |Ctrl|
+     * `-----'    `--------------------------------------'    `----'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, NO,  BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, NO,  NO,  NO,       BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PMNS,
+    LCTL,NO,  NO,  NO,  NO,  NO,  LEFT,DOWN,UP,  RGHT,NO,  NO,       NO,  ENT,                         P4,  P5,  P6,  PCMM,
+    LSFT,NO,  VOLD,VOLU,MUTE,NO,  NO,  HOME,PGDN,PGUP,END, FN1,      NO,  RSFT,          UP,           P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               SPC,                          RALT,     RCTL,     LEFT,DOWN,RGHT,    NO,  P0,  PDOT,NO
+    ),
+
+    /* 3: HHKB
+     * ,-----------------------------------------------------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+     * |-----------------------------------------------------------|
+     * |Caps |   |   |   |   |   |   |   |Psc|Slk|Pus|Up |   |Backs|
+     * |-----------------------------------------------------------|
+     * |Contro|VoD|VoU|Mut|   |   |  *|  /|Hom|PgU|Lef|Rig|Enter   |
+     * |-----------------------------------------------------------|
+     * |Shift   |   |   |   |   |   |  +|  -|End|PgD|Dow|Fn2       |
+     * |-----------------------------------------------------------|
+     * |Ctrl |    |Alt |         Space              |Alt |    |Ctrl|
+     * `-----'    `--------------------------------------'    `----'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, NO,  BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,BRK, UP,  NO,       BSLS,     DEL, END, PGDN,    P7,  P8,  P9,  PPLS,
+    LCTL,VOLD,VOLU,MUTE,NO,  NO,  PAST,PSLS,HOME,PGUP,LEFT,RGHT,     NO,  ENT,                         P4,  P5,  P6,  PCMM,
+    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  PPLS,PMNS,END, PGDN,DOWN,     NO,  FN2,           UP,           P1,  P2,  P3,  PENT,
+    LGUI,     LALT,               SPC,                          RALT,     RCTL,     LEFT,DOWN,RGHT,    NO,  P0,  PDOT,NO
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/terminal_usb/keymap_122.c b/converter/terminal_usb/keymap_122.c
new file mode 100644
index 0000000000..7a2168122f
--- /dev/null
+++ b/converter/terminal_usb/keymap_122.c
@@ -0,0 +1,143 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/* 
+ * IBM Terminal keyboard 1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ *     8 bytes
+ *   +---------+
+ *  0|         |
+ *  :|         | 0x00-0x87
+ *  ;|         |
+ * 17|         |
+ *   +---------+
+ */
+#define KEYMAP( \
+                  K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F,                                         \
+                  K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E,                                         \
+                                                                                                           \
+    K05,K06,  K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66,  K67,K6E,K6F,  K76,K77,K7E,K84, \
+    K04,K0C,  K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,    K5C,  K64,K65,K6D,  K6C,K75,K7D,K7C, \
+    K03,K0B,  K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K53,K5A,      K63,      K6B,K73,K74,K7B, \
+    K83,K0A,  K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,    K51,K59,  K61,K62,K6A,  K69,K72,K7A,K79, \
+    K01,K09,  K11,    K19,            K29,                    K39,    K58,      K60,      K68,K70,K71,K78  \
+) { \
+    { KB_NO,    KB_##K01, KB_NO,    KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+    { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_##K6D, KB_##K6E, KB_##K6F }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \
+    { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO    }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_##K83, KB_##K84, KB_NO,    KB_NO,    KB_NO,   }, \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+     * `---'   `---------------' `---------------' `---------------' `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|BS | |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Retu|               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl|    |Alt |          Space              |Alt |    |Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `----'    `---------------------------------------'    `----' `-----------' `---------------'
+     */
+    KEYMAP(
+                     F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
+                     F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,
+
+    PSCR,ESC,   GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,  INS, HOME,PGUP,  NLCK,PSLS,PAST,PMNS,
+    SLCK,INT4,  TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  DEL, END, PGDN,  P7,  P8,  P9,  PPLS,
+    PAUS,INT5,  CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     NUHS,ENT,        UP,         P4,  P5,  P6,  PCMM,
+    APP, INT6,  LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     RO,  RSFT,  LEFT,INT2,RGHT,  P1,  P2,  P3,  PENT,
+    RGUI,LGUI,  LCTL,     LALT,               SPC,                          RALT,     RCTL,       DOWN,       NO,  P0,  PDOT,NO
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/terminal_usb/led.c b/converter/terminal_usb/led.c
new file mode 100644
index 0000000000..e448e84ec7
--- /dev/null
+++ b/converter/terminal_usb/led.c
@@ -0,0 +1,33 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    uint8_t ps2_led = 0;
+    if (usb_led &  (1<<USB_LED_SCROLL_LOCK))
+        ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+    if (usb_led &  (1<<USB_LED_NUM_LOCK))
+        ps2_led |= (1<<PS2_LED_NUM_LOCK);
+    if (usb_led &  (1<<USB_LED_CAPS_LOCK))
+        ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+    ps2_host_set_led(ps2_led);
+}
diff --git a/converter/terminal_usb/matrix.c b/converter/terminal_usb/matrix.c
new file mode 100644
index 0000000000..a6eff8c1ec
--- /dev/null
+++ b/converter/terminal_usb/matrix.c
@@ -0,0 +1,226 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|         |
+ *  :|         | 0x00-0x87
+ *  ;|         |
+ * 17|         |
+ *   +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      (code>>3)
+#define COL(code)      (code&0x07)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    print_enable = true;
+    debug_enable = true;
+    //debug_matrix = true;
+    //debug_keyboard = true;
+    //debug_mouse = false;
+
+    ps2_host_init();
+    // Make and Break code without Typematic
+    while (ps2_host_send(0xF8) != 0xFA) {
+        debug("send F8: failed\n");
+        _delay_ms(500);
+    }
+    debug("send F8: OK\n");
+
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+
+    // scan code reading states
+    static enum {
+        INIT,
+        F0,
+    } state = INIT;
+
+
+    is_modified = false;
+
+    uint8_t code;
+    while ((code = ps2_host_recv())) {
+        debug_hex(code);
+        switch (state) {
+            case INIT:
+                switch (code) {
+                    case 0xF0:
+                        state = F0;
+                        debug(" ");
+                        break;
+                    default:    // normal key make
+                        if (code < 0x88) {
+                            matrix_make(code);
+                        } else {
+                            debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n");
+                        }
+                        state = INIT;
+                        debug("\n");
+                }
+                break;
+            case F0:    // Break code
+                switch (code) {
+                    default:
+                    if (code < 0x88) {
+                        matrix_break(code);
+                    } else {
+                        debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+                    }
+                    state = INIT;
+                    debug("\n");
+                }
+                break;
+        }
+    }
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        if (matrix_has_ghost_in_row(i))
+            return true;
+    }
+#endif
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+        if (matrix_has_ghost_in_row(row)) {
+            print(" <ghost");
+        }
+#endif
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+    // no ghost exists in case less than 2 keys on
+    if (((matrix[row] - 1) & matrix[row]) == 0)
+        return false;
+
+    // ghost exists in case same state as other row
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+            return true;
+    }
+    return false;
+}
+#endif
+
+
+inline
+static void matrix_make(uint8_t code)
+{
+    if (!matrix_is_on(ROW(code), COL(code))) {
+        matrix[ROW(code)] |= 1<<COL(code);
+        is_modified = true;
+    }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+    if (matrix_is_on(ROW(code), COL(code))) {
+        matrix[ROW(code)] &= ~(1<<COL(code));
+        is_modified = true;
+    }
+}
diff --git a/converter/x68k_usb/Makefile b/converter/x68k_usb/Makefile
new file mode 100644
index 0000000000..c3b5fa29f3
--- /dev/null
+++ b/converter/x68k_usb/Makefile
@@ -0,0 +1,87 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
+# Target file name (without extension).
+TARGET = x68k_usb_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	main.c \
+	keymap.c \
+	matrix.c \
+	led.c \
+	x68k.c
+
+CONFIG_H = config_pjrc.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+MOUSEKEY_ENABLE = yes	# Mouse keys
+EXTRAKEY_ENABLE = yes	# Audio control and System control
+NKRO_ENABLE = yes	# USB Nkey Rollover
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = avr109
+AVRDUDE_PORT = /dev/ttyACM0
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+#AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
+
+
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/x68k_usb/README b/converter/x68k_usb/README
new file mode 100644
index 0000000000..0b61b2c4b3
--- /dev/null
+++ b/converter/x68k_usb/README
@@ -0,0 +1,129 @@
+X68000 to USB keyboard protocol converter
+=========================================
+SHARP X68000 is a hobby computer released in Japan.(1987-93)
+http://en.wikipedia.org/wiki/Sharp_X68000
+
+X68000 keyboard has ALPS linear switches.
+- DSETK0016CE01   green linear
+- DSETK0023CE03   yellow linear
+
+
+Hardware
+--------
+Target MCU is ATMega32u4 but other USB capable AVR will also work.
+You can use PJRC Teensy as dev board.
+    http://www.pjrc.com/teensy/
+
+Wiring:
+    Mini-DIN            Teensy
+    -----------------------------------------------------
+    pin1   +5V          VCC
+    pin2   MOUSE        -
+    pin3   RXD          PD2(RXD)
+    pin4   TXD          PD3(TXD) NOTE: Not supported yet.
+    pin5   READY        -
+    pin6   REMOTE       -
+    pin7   GND          GND
+
+
+Firmware
+--------
+Build:
+    $ cd x68k_usb
+    $ make
+
+And load the binary to MCU with your favorite programmer.
+If you use Teensy you can load with PJRC Teensy Loader tool.
+    http://www.pjrc.com/teensy/loader.html
+
+
+*   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *   *
+
+
+X68000 Keyboard Protocol
+========================
+http://kyoutan.jpn.org/uts/pc/pic/x68key/
+
+
+Connector
+---------
+Mini DIN 7pin(female connector on computer side)
+       7 6 5
+       o o o
+    4 o  =  o 3
+        o o
+        2 1
+
+    Mini-DIN
+    -------------
+    pin1   +5V
+    pin2   MOUSE
+    pin3   RXD
+    pin4   TXD
+    pin5   READY
+    pin6   REMOTE
+    pin7   GND
+
+
+Signaling
+---------
+- TXD,RXD
+    Asynchronous, 2400baud, 1-startbit(L), 8-databit, 1-stopbit(H)
+
+- READY
+    ready/not ready(1/0)
+
+
+Data from keyboard
+------------------
+bit 7       make/break flag(0/1)
+bit 6-0     following scan code
+
+
+Data from computer
+------------------
+- LED contorol ON/OFF(0/1)
+    bit 7   1(fixed)
+    bit 6   全角
+    bit 5   ひらがな
+    bit 4   INS
+    bit 3   CAPS
+    bit 2   コード入力
+    bit 1   ローマ字
+    bit 0   かな
+
+- Repeat delay
+    bit 7   0(fixed)
+    bit 6   1(fixed)
+    bit 5   1(fixed)
+    bit 4   0(fixed)
+    bit 3-0 delay
+    REPEAT_DELAY = 200+delay*100 ms
+    default: 500ms
+ 
+-  Repeat time
+    bit 7   0(fixed)
+    bit 6   1(fixed)
+    bit 5   1(fixed)
+    bit 4   1(fixed)
+    bit 3-0 time
+    REPEAT_TIME = 30+time^2*5 ms
+    default: 110ms
+
+
+Scan Codes
+----------
+,---. ,---.    ,-------------------,    ,-------------------.  ,-----------. ,---------------.
+| 61| | 62|    | 63| 64| 65| 66| 67|    | 68| 69| 6A| 6B| 6C|  | 5A| 5B| 5C| | 5D| 52| 53| 54|
+`---' `---'    `-------------------'    `-------------------'  `-----------' `---------------'
+,-----------------------------------------------------------.  ,-----------. ,---------------.
+| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F|  | 36| 5E| 37| | 3F| 40| 41| 42|
+|-----------------------------------------------------------|  |------------ |---------------|
+|  10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C|     |  | 38| 39| 3A| | 43| 44| 45| 46|
+|------------------------------------------------------. 1D |  `---=====---' |---------------|
+|  71  | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29|    |   ___| 3C|___  | 47| 48| 49| 4A|
+|-----------------------------------------------------------|  | 3B|---| 3D| |-----------|---|
+|  70    | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34|   70 |  `---| 3E|---' | 4B| 4C| 4D|   |
+`-----------------------------------------------------------|  .---=====---. |-----------| 4E|
+       | 5F| 55 | 56 |     35     | 57 | 58 | 59 | 60|         |  72 |  73 | | 4F| 50| 51|   |
+       `---------------------------------------------'         `-----------' `---------------'
diff --git a/converter/x68k_usb/config_pjrc.h b/converter/x68k_usb/config_pjrc.h
new file mode 100644
index 0000000000..20758bf249
--- /dev/null
+++ b/converter/x68k_usb/config_pjrc.h
@@ -0,0 +1,66 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+/* controller configuration */
+#include "controller_teensy.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6800
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         SHARP X68000 keyboard converter
+#define DESCRIPTION     converts SHARP X68000 keyboard protocol into USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_RALT)) || \
+    keyboard_report->mods == (MOD_BIT(KB_LCTRL) | MOD_BIT(KB_RSHIFT)) \
+)
+
+
+/* mouse keys */
+#ifdef MOUSEKEY_ENABLE
+#   define MOUSEKEY_DELAY_TIME 255
+#endif
+
+
+/* USART configuration
+ *     asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
+ */
+#ifdef __AVR_ATmega32U4__
+#   define KBD_RX_VECT        USART1_RX_vect
+#   define KBD_RX_DATA        UDR1
+#   define KBD_RX_BAUD        2400
+#   define KBD_RX_UBBR        ((F_CPU/(16UL*KBD_RX_BAUD))-1)
+#   define KBD_RX_INIT()      do { \
+        UBRR1L = (uint8_t) KBD_RX_UBBR; \
+        UBRR1H = (uint8_t) (KBD_RX_UBBR>>8); \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
+    } while(0)
+#else
+#   error "USART configuration is needed."
+#endif
+
+#endif
diff --git a/converter/x68k_usb/keymap.c b/converter/x68k_usb/keymap.c
new file mode 100644
index 0000000000..94c2aeee11
--- /dev/null
+++ b/converter/x68k_usb/keymap.c
@@ -0,0 +1,140 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "usb_keycodes.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+// Following macros help you to define a keymap with the form of actual keyboard layout.
+
+/* X68000 Keyboard Scan codes
+    ,---. ,---.    ,-------------------,    ,-------------------.  ,-----------. ,---------------.
+    | 61| | 62|    | 63| 64| 65| 66| 67|    | 68| 69| 6A| 6B| 6C|  | 5A| 5B| 5C| | 5D| 52| 53| 54|
+    `---' `---'    `-------------------'    `-------------------'  `-----------' `---------------'
+    ,-----------------------------------------------------------.  ,-----------. ,---------------.
+    | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F|  | 36| 5E| 37| | 3F| 40| 41| 42|
+    |-----------------------------------------------------------|  |------------ |---------------|
+    |  10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C|     |  | 38| 39| 3A| | 43| 44| 45| 46|
+    |------------------------------------------------------. 1D |  `---=====---' |---------------|
+    |  71  | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29|    |   ___| 3C|___  | 47| 48| 49| 4A|
+    |-----------------------------------------------------------|  | 3B|---| 3D| |-----------|---|
+    |  70    | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34|   70 |  `---| 3E|---' | 4B| 4C| 4D|   |
+    `-----------------------------------------------------------|  .---=====---. |-----------| 4E|
+           | 5F| 55 | 56 |     35     | 57 | 58 | 59 | 60|         |  72 |  73 | | 4F| 50| 51|   |
+           `---------------------------------------------'         `-----------' `---------------'
+*/
+#define KEYMAP( \
+    K61,K62,        K63,K64,K65,K66,K67,    K68,K69,K6A,K6B,K6C,  K5A,K5B,K5C,  K5D,K52,K53,K54, \
+    K01,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K0E,K0F,  K36,K5E,K37,  K3F,K40,K41,K42, \
+    K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B,K1C,    K1D,  K38,K39,K3A,  K43,K44,K45,K46, \
+    K71,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,              K3C,      K47,K48,K49,K4A, \
+    K70,K2A,K2B,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34,              K3B,K3E,K3D,  K4B,K4C,K4D,K4E, \
+        K5F,K55,K56,    K35,        K57,K58,K59,K60,              K72,    K73,  K4F,K50,K51      \
+) { \
+    { KB_NO,    KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
+    { KB_##K08, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
+    { KB_##K10, KB_##K11, KB_##K12, KB_##K13, KB_##K14, KB_##K15, KB_##K16, KB_##K17 }, \
+    { KB_##K18, KB_##K19, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_##K1F }, \
+    { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
+    { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
+    { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_##K37 }, \
+    { KB_##K38, KB_##K39, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_##K3F }, \
+    { KB_##K40, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_##K47 }, \
+    { KB_##K48, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_##K4F }, \
+    { KB_##K50, KB_##K51, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
+    { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_##K5C, KB_##K5D, KB_##K5E, KB_##K5F }, \
+    { KB_##K60, KB_##K61, KB_##K62, KB_##K63, KB_##K64, KB_##K65, KB_##K66, KB_##K67 }, \
+    { KB_##K68, KB_##K69, KB_##K6A, KB_##K6B, KB_##K6C, KB_NO,    KB_NO,    KB_NO    }, \
+    { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_NO,    KB_NO,    KB_NO,    KB_NO,   }, \
+    { KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO,    KB_NO    }  \
+}
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+    0,              // Fn0
+    0,              // Fn1
+    0,              // Fn2
+    0,              // Fn3
+    0,              // Fn4
+    0,              // Fn5
+    0,              // Fn6
+    0               // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+    KB_NO,          // Fn0
+    KB_NO,          // Fn1
+    KB_NO,          // Fn2
+    KB_NO,          // Fn3
+    KB_NO,          // Fn4
+    KB_NO,          // Fn5
+    KB_NO,          // Fn6
+    KB_NO           // Fn7
+};
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* X68000 Keyboard Scan codes
+    ,---. ,---.    ,-------------------,    ,-------------------.  ,-----------. ,---------------.
+    | 61| | 62|    | 63| 64| 65| 66| 67|    | 68| 69| 6A| 6B| 6C|  | 5A| 5B| 5C| | 5D| 52| 53| 54|
+    `---' `---'    `-------------------'    `-------------------'  `-----------' `---------------'
+    ,-----------------------------------------------------------.  ,-----------. ,---------------.
+    | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| 0F|  | 36| 5E| 37| | 3F| 40| 41| 42|
+    |-----------------------------------------------------------|  |------------ |---------------|
+    |  10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C|     |  | 38| 39| 3A| | 43| 44| 45| 46|
+    |------------------------------------------------------. 1D |  `---=====---' |---------------|
+    |  71  | 1E| 1F| 20| 21| 2l| 23| 24| 25| 26| 27| 28| 29|    |   ___| 3C|___  | 47| 48| 49| 4A|
+    |-----------------------------------------------------------|  | 3B|---| 3D| |-----------|---|
+    |  70    | 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34|   70 |  `---| 3E|---' | 4B| 4C| 4D|   |
+    `-----------------------------------------------------------|  .---=====---. |-----------| 4E|
+           | 5F| 55 | 56 |     35     | 57 | 58 | 59 | 60|         |  72 |  73 | | 4F| 50| 51|   |
+           `---------------------------------------------'         `-----------' `---------------'
+*/
+    KEYMAP(
+    NO,  NO,  F1,  F2,  F3,  F4,  F5,       F6,  F7,  F8,  F9,  F10,              PSCR,SLCK,PAUS,     CAPS,NO,  NO,  NO,
+    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,BSPC,   INS, HOME,PGUP,     NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     ENT,    DEL, END, PGDN,     P7,  P8,  P9,  PPLS,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,ENT,                   UP,            P4,  P5,  P6,  PEQL,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,GRV,                   LEFT,DOWN,RGHT,     P1,  P2,  P3,  PENT,
+         LGUI,LALT,NO,       SPC,      RALT,RGUI,RCTL,APP,                        NO,       NO,       P0,  PCMM,PDOT
+    ),
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
+}
+
+uint8_t keymap_fn_layer(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_layer[biton(fn_bits)]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t fn_bits)
+{
+    return pgm_read_byte(&fn_keycode[(biton(fn_bits))]);
+}
diff --git a/converter/x68k_usb/led.c b/converter/x68k_usb/led.c
new file mode 100644
index 0000000000..40156cf4ac
--- /dev/null
+++ b/converter/x68k_usb/led.c
@@ -0,0 +1,26 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "x68k.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+    // not supported now
+}
diff --git a/converter/x68k_usb/matrix.c b/converter/x68k_usb/matrix.c
new file mode 100644
index 0000000000..954e7ef129
--- /dev/null
+++ b/converter/x68k_usb/matrix.c
@@ -0,0 +1,141 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "x68k.h"
+#include "matrix.h"
+
+
+/*
+ * Matrix Array usage:
+ *
+ * ROW: 16(4bits)
+ * COL:  8(3bits)
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|00 ... 07|
+ *  1|08 ... 0F|
+ *  :|   ...   |
+ *  :|   ...   |
+ *  E|70 ... 77|
+ *  F|78 ... 7F|
+ *   +---------+
+ *
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      ((code>>3)&0xF)
+#define COL(code)      (code&0x07)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    x68k_init();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    is_modified = false;
+
+    uint8_t code;
+    code = x68k_recv();
+    if (code == 0) {
+        return 0;
+    }
+
+    phex(code); print(" ");
+    if (code&0x80) {
+        // break code
+        if (matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] &= ~(1<<COL(code));
+            is_modified = true;
+        }
+    } else {
+        // make code
+        if (!matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] |=  (1<<COL(code));
+            is_modified = true;
+        }
+    }
+    return code;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}