m0110: Add support for international keyboard

9 files changed, 327 insertions, 241 deletions

diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile
index ac54945e73..5f3bb98e2f 100644
--- a/converter/m0110_usb/Makefile
+++ b/converter/m0110_usb/Makefile
@@ -17,7 +17,7 @@ SRC =	matrix.c \
 ifdef KEYMAP
     SRC += keymap_$(KEYMAP).c
 else
-    SRC += keymap_plain.c
+    SRC += keymap_default.c
 endif
 
 CONFIG_H = config.h
@@ -25,10 +25,8 @@ CONFIG_H = config.h
 
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
+MCU = atmega32u2       # TMK converter rev2
+MCU = atmega32u4       # TMK converter rev1
 
 
 # Processor frequency.
diff --git a/converter/m0110_usb/Makefile.teensy b/converter/m0110_usb/Makefile.teensy
new file mode 100644
index 0000000000..9a5c41068e
--- /dev/null
+++ b/converter/m0110_usb/Makefile.teensy
@@ -0,0 +1,98 @@
+# Target file name (without extension).
+TARGET = m0110_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC =	matrix.c \
+	led.c \
+	keymap_common.c \
+	m0110.c
+
+# To use own keymap file run make like: make keymap=hasu
+ifdef KEYMAP
+    SRC += keymap_$(KEYMAP).c
+else
+    SRC += keymap_default.c
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162       # Teensy 1.0
+MCU = atmega32u4       # Teensy 2.0
+#MCU = at90usb646       # Teensy++ 1.0
+#MCU = at90usb1286      # Teensy++ 2.0
+
+
+# Processor frequency.
+#   Normally the first thing your program should do is set the clock prescaler,
+#   so your program will run at the correct speed.  You should also set this
+#   variable to same clock speed.  The _delay_ms() macro uses this, and many
+#   examples use this variable to calculate timings.  Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   *Comment out* to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes	# USB Nkey Rollover - not yet supported in LUFA
+#KEYMAP_SECTION_ENABLE = yes	# fixed address keymap for keymap editor
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index 7de36d5de1..22a8eb044d 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -1,6 +1,6 @@
 M0110/M0110A to USB keyboard converter
 ======================================
-This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
+This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
 
 Read README of top directory too.
 
@@ -20,12 +20,13 @@ Update
 - 2013/08: Change port for signals `PF` to `PD`
 - 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now.
 - 2014/06: Change keymaps
+- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c)
 
 
 
 Building Hardware
 -----------------
-You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
+You need [TMK converter] or AVR dev board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
 
 [![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg)
 
@@ -38,6 +39,7 @@ Close-up picture of handset cable. You can see one end of plug has reverse color
 [![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1)
 
 [Teensy]: http://www.pjrc.com/teensy/
+[TMK converter]: https://github.com/tmk/keyboard_converter
 
 
 ### Socket Pinout
@@ -53,17 +55,14 @@ You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular wh
 
 Building Firmware
 -----------------
-To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration.
+To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap.
 
     $ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
     $ cd m0110_usb
-    $ make clean
-    $ make
+    $ make -f Makefile clean
+    $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}]
 
-To select keymap use `KEYMAP` option.
-
-    $ make clean
-    $ make KEYMAP={plain|spacefn|hasu}
+Use `Makefile.teensy` instead for Teensy.
 
 
 
@@ -71,8 +70,8 @@ Keymap
 ------
 To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this.
 
-    $ make clean
-    $ make KEYMAP=name
+    $ make -f Makefile clean
+    $ make -f Makefile KEYMAP=name
 
 
 
diff --git a/converter/m0110_usb/keymap.c b/converter/m0110_usb/keymap.c
deleted file mode 100644
index 4570dd2832..0000000000
--- a/converter/m0110_usb/keymap.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
-Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-/* M0110A Support was contributed by skagon@github */
-
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-/* 
- * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
- * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
- * on the M0110A, but since it generates a unique scan code which is not used for some other key in
- * the M0110A, they are totally interchangeable.  In fact, the M0110A is functionally (almost)
- * identical to the combination of the M0110 along with the M0120 keypad. The only difference
- * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
- * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
- * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
- * substituted the [comma] key with the [=] key, however its scancode is the same.
- *
- * Physical layout:
- * M0110A
- * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Bcksp| |Clr|  =|  /|  *|
- * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
- * |-----------------------------------------------------'   | |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  +|
- * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
- * |---------------------------------------------------------' |-----------|Ent|
- * |Opt  |Mac    |           Space           |  \|Lft|Rgt|Dn | |      0|  .|   |
- * `---------------------------------------------------------' `---------------'
- *
- * M0110                                                       M0120
- * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  -|  +|  *|
- * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
- * |---------------------------------------------------------| |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  ,|
- * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
- * `---------------------------------------------------------' |-----------|Ent|
- *      |Opt|Mac |         Space               |Ent |Opt|      |      0|  .|   |
- *      `-----------------------------------------------'      `---------------'
- * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down)
- *
- * NOTE: \ is located differently.
- * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A).
- * NOTE: Left Shift and right Shift are logically same key.
- * NOTE: Left Option and right Option are logically same key.
- */
-
-/* Keymap definition Macro
- * ,---------------------------------------------------------. ,---------------.
- * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
- * |---------------------------------------------------------| |---------------|
- * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
- * |-----------------------------------------------------'   | |---------------|
- * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  +|
- * |---------------------------------------------------------| |---------------|
- * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Opt  |Mac    |         Space         |Ent|  \|Lft|Rgt|Dn | |      0|  .|   |
- * `---------------------------------------------------------' `---------------'
- * NOTE: Ent between Space and \ means Enter on M0110.
- */
-#define KEYMAP( \
-    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
-    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,      K59,K5B,K5C,K4E, \
-    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,    K24,  K56,K57,K58,K66, \
-    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,        K4D,  K53,K54,K55,K4C, \
-    K3A,K37,            K31,            K34,K2A,K46,K42,K48,  K52,    K41      \
-) { \
-    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K08, KC_##K09, KC_NO,    KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
-    { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO,    KC_NO,    KC_##K37 }, \
-    { KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_##K47 }, \
-    { KC_##K48, KC_NO,    KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##K62, KC_NO,    KC_NO,    KC_NO,    KC_##K66, KC_NO    }, \
-    { KC_##K68, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K6D, KC_NO,    KC_NO    }, \
-}
-
-#ifdef KEYMAP_SECTION_ENABLE
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
-#else
-static const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-#endif
-    /* Default:
-     * ,---------------------------------------------------------. ,---------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Clr|  =|  /|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
-     * |-----------------------------------------------------'   | |---------------|
-     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter | |  4|  5|  6|  +|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
-     * |---------------------------------------------------------| |-----------|Ent|
-     * |Ctl  |Gui    |         Space         |Alt|  \|Lft|Rgt|Dn | |      0|  .|   |
-     * `---------------------------------------------------------' `---------------'
-     */
-    [0] = KEYMAP(
-    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    CLR, EQL, PSLS,PAST,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
-    LCAP,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     FN15,    P4,  P5,  P6,  PPLS,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
-    LCTL,LGUI,               FN16,               LALT,FN31,LEFT,RGHT,DOWN,    P0,       PDOT
-    ),
-    /* Cursor Layer(WASD, IJKL)
-     * ,---------------------------------------------------------. ,---------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  =|  /|  *|
-     * |---------------------------------------------------------| |---------------|
-     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|   | |  7|  8|  9|  -|
-     * |-----------------------------------------------------'   | |---------------|
-     * |Caps  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Enter | |  4|  5|  6|  +|
-     * |---------------------------------------------------------| |---------------|
-     * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shif|PgU| |  1|  2|  3|   |
-     * |---------------------------------------------------------| |-----------|Ent|
-     * |Ctl  |Gui    |         Space        |Alt |  \|Hom|End|PgD| |      0|  .|   |
-     * `---------------------------------------------------------' `---------------'
-     */
-    [3] = KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
-    LCAP,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN15,    P4,  P5,  P6,  PPLS,
-    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
-    LCTL,LGUI,               FN16,               LALT,FN31,HOME,END, PGDN,    P0,       PDOT
-    ),
-    [4] = KEYMAP(
-    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
-    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  INS,          P7,  P8,  P9,  PMNS,
-    LCAP,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     FN15,    P4,  P5,  P6,  PPLS,
-    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
-    LCTL,LGUI,               FN16,               LALT,FN31,HOME,END, PGDN,    P0,       PDOT
-    ),
-    [7] = {},
-};
-
-
-/*
- * Fn action definition
- */
-#ifdef KEYMAP_SECTION_ENABLE
-const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
-#else
-static const uint16_t fn_actions[] PROGMEM = {
-#endif
-    [0]  = ACTION_LAYER_MOMENTARY(1),
-    [1]  = ACTION_LAYER_MOMENTARY(2),
-    [2]  = ACTION_LAYER_MOMENTARY(3),
-    [3]  = ACTION_LAYER_MOMENTARY(4),
-    [4]  = ACTION_LAYER_MOMENTARY(5),
-    [5]  = ACTION_LAYER_MOMENTARY(6),
-    [6]  = ACTION_LAYER_MOMENTARY(7),
-    [7]  = ACTION_LAYER_TOGGLE(1),
-    [8]  = ACTION_LAYER_TOGGLE(2),
-    [9]  = ACTION_LAYER_TOGGLE(3),
-    [10] = ACTION_LAYER_TAP_TOGGLE(1),
-    [11] = ACTION_LAYER_TAP_TOGGLE(2),
-    [12] = ACTION_LAYER_TAP_TOGGLE(3),
-    [13] = ACTION_LAYER_TAP_KEY(1, KC_F),
-    [14] = ACTION_LAYER_TAP_KEY(2, KC_J),
-    [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
-    [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
-    [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
-    [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
-    [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
-    [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
-    [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
-    [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
-    [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
-    [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
-    [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
-    [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
-    [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
-    [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
-    [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
-    [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
-    [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
-};
-
-
-
-/* translates key to keycode */
-uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
-{
-    return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
-}
-
-/* translates Fn index to action */
-action_t keymap_fn_to_action(uint8_t keycode)
-{
-    action_t action;
-    action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
-    return action;
-}
diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h
index e1d47342ef..8bde7473dd 100644
--- a/converter/m0110_usb/keymap_common.h
+++ b/converter/m0110_usb/keymap_common.h
@@ -105,3 +105,39 @@ extern const uint16_t fn_actions[];
     { KC_NO,    KC_NO,    KC_##K62, KC_NO,    KC_NO,    KC_NO,    KC_##K66, KC_NO    }, \
     { KC_##K68, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K6D, KC_NO,    KC_NO    }, \
 }
+
+/* International keyboard
+ *  ,---------------------------------------------------------.
+ *  | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18|   33|
+ *  |---------------------------------------------------------|
+ *  |   30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
+ *  |------------------------------------------------------,  |
+ *  |    39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24|  |
+ *  |---------------------------------------------------------|
+ *  |  38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A|      38|
+ *  `---------------------------------------------------------'
+ *       | 3A|  37|             34              |   31| 3A|
+ *       `------------------------------------------------'
+ */
+#define KEYMAP_INTL( \
+    K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33,  K47,K68,K6D,K62, \
+    K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A,  K59,K5B,K5C,K4E, \
+    K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24,      K56,K57,K58,K66, \
+    K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A,    K4D,  K53,K54,K55,K4C, \
+    K3A,K37,            K34,            K31,    K46,K42,K48,  K52,    K41      \
+) { \
+    { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+    { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
+    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+    { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
+    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
+    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO,    KC_NO,    KC_##K37 }, \
+    { KC_##K38, KC_##K39, KC_##K3A, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
+    { KC_NO,    KC_##K41, KC_##K42, KC_NO,    KC_NO,    KC_NO,    KC_##K46, KC_##K47 }, \
+    { KC_##K48, KC_NO,    KC_NO,    KC_NO,    KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+    { KC_##K58, KC_##K59, KC_NO,    KC_##K5B, KC_##K5C, KC_NO,    KC_NO,    KC_NO    }, \
+    { KC_NO,    KC_NO,    KC_##K62, KC_NO,    KC_NO,    KC_NO,    KC_##K66, KC_NO    }, \
+    { KC_##K68, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K6D, KC_NO,    KC_NO    }, \
+}
diff --git a/converter/m0110_usb/keymap_default.c b/converter/m0110_usb/keymap_default.c
new file mode 100644
index 0000000000..b0b8ee220a
--- /dev/null
+++ b/converter/m0110_usb/keymap_default.c
@@ -0,0 +1,85 @@
+/*
+Copyright 2011,2012,2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include "keycode.h"
+#include "keymap_common.h"
+
+
+
+const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+    /* Default:
+     * M0110                                                       M0120
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  -|  +|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
+     * |---------------------------------------------------------| |---------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
+     * `---------------------------------------------------------' |-----------|Ent|
+     *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+     *      `-----------------------------------------------'      `---------------'
+     * M0110A
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
+     * |-----------------------------------------------------'   | |---------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+     * |---------------------------------------------------------| |-----------|Ent|
+     * |Opt  |Mac    |         Space             |  \|Lft|Rgt|Dn | |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
+     */
+    [0] = KEYMAP(
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    NLCK,EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,         P7,  P8,  P9,  PMNS,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          UP,      P1,  P2,  P3,  PENT,
+    LALT,LGUI,               SPC,                FN0, BSLS,LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+    /* Cursor Layer
+     * ,---------------------------------------------------------. ,---------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  -|  +|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |   |INS| |  7|  8|  9|  /|
+     * |---------------------------------------------------------| |---------------|
+     * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  ,|
+     * |---------------------------------------------------------| |---------------|
+     * |Shift   |End|   |PgD|   |   |   |   |End|PgD|Dow|Shift   | |  1|  2|  3|   |
+     * `---------------------------------------------------------' |-----------|Ent|
+     *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+     *      `-----------------------------------------------'      `---------------'
+     */
+    [1] = KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,           P7,  P8,  P9,  PMNS,
+    LCTL,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,     ENT,     P4,  P5,  P6,  PPLS,
+    LSFT,END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,          PGUP,    P1,  P2,  P3,  PENT,
+    LALT,LGUI,               SPC,                FN0, INS, HOME,END, PGDN,    P0,       PDOT
+    ),
+};
+
+
+/*
+ * Fn action definition
+ */
+const uint16_t fn_actions[] PROGMEM = {
+    [0]  = ACTION_LAYER_MOMENTARY(1),
+};
diff --git a/converter/m0110_usb/keymap_intl.c b/converter/m0110_usb/keymap_intl.c
new file mode 100644
index 0000000000..ceb1f18d7f
--- /dev/null
+++ b/converter/m0110_usb/keymap_intl.c
@@ -0,0 +1,85 @@
+/*
+Copyright 2015 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include "keycode.h"
+#include "keymap_common.h"
+
+
+
+const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+    /* International keyboard
+     * M0110                                                       M0120
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  -|  +|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Ret| |  7|  8|  9|  /|
+     * |------------------------------------------------------,  | |---------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|  | |  4|  5|  6|  ,|
+     * |---------------------------------------------------------| |---------------|
+     * |Shif|   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
+     * `---------------------------------------------------------' |-----------|Ent|
+     *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+     *      `-----------------------------------------------'      `---------------'
+     * M0110A(not existent?)
+     * ,---------------------------------------------------------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Nlk|  =|  /|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Ret| |  7|  8|  9|  -|
+     * |------------------------------------------------------,  | |---------------|
+     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|  | |  4|  5|  6|  +|
+     * |---------------------------------------------------------| |---------------|
+     * |Shif|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
+     * |---------------------------------------------------------| |-----------|Ent|
+     * |Opt  |Mac    |         Space             |  \|Lft|Rgt|Dn | |      0|  .|   |
+     * `---------------------------------------------------------' `---------------'
+     */
+    [0] = KEYMAP_INTL(
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,    NLCK,EQL, PSLS,PAST,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,ENT,     P7,  P8,  P9,  PMNS,
+    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,BSLS,         P4,  P5,  P6,  PPLS,
+    LSFT,NUBS,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,     UP,      P1,  P2,  P3,  PENT,
+    LALT,LGUI,               SPC,                FN0,      LEFT,RGHT,DOWN,    P0,       PDOT
+    ),
+    /* Cursor Layer
+     * ,---------------------------------------------------------. ,---------------.
+     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|  -|  +|  *|
+     * |---------------------------------------------------------| |---------------|
+     * |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |   |INS| |  7|  8|  9|  /|
+     * |---------------------------------------------------------| |---------------|
+     * |Ctrl  |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |  4|  5|  6|  ,|
+     * |---------------------------------------------------------| |---------------|
+     * |Shif|  <|End|   |PgD|   |   |   |   |End|PgD|Dow|Shift   | |  1|  2|  3|   |
+     * `---------------------------------------------------------' |-----------|Ent|
+     *      |Opt|Mac |         Space               |Fn  |Opt|      |      0|  .|   |
+     *      `-----------------------------------------------'      `---------------'
+     */
+    [1] = KEYMAP_INTL(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,     NLCK,EQL, PSLS,PAST,
+    CAPS,HOME,UP,  PGUP,NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,  ENT,     P7,  P8,  P9,  PMNS,
+    LCTL,LEFT,DOWN,RGHT,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,INS,          P4,  P5,  P6,  PPLS,
+    LSFT,NO,  END, NO,  PGDN,NO,  NO,  NO,  NO,  END, PGDN,DOWN,     PGUP,    P1,  P2,  P3,  PENT,
+    LALT,LGUI,               SPC,                FN0,      HOME,END, PGDN,    P0,       PDOT
+    ),
+};
+
+
+/*
+ * Fn action definition
+ */
+const uint16_t fn_actions[] PROGMEM = {
+    [0]  = ACTION_LAYER_MOMENTARY(1),
+};
diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c
index f262dca224..d1507fcaa9 100644
--- a/converter/m0110_usb/keymap_plain.c
+++ b/converter/m0110_usb/keymap_plain.c
@@ -27,7 +27,7 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |---------------------------------------------------------| |---------------|
      * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \| |  7|  8|  9|  /|
      * |---------------------------------------------------------| |---------------|
-     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
+     * |Caps  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  ,|
      * |---------------------------------------------------------| |---------------|
      * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   | |  1|  2|  3|   |
      * `---------------------------------------------------------' |-----------|Ent|
diff --git a/converter/m0110_usb/led.c b/converter/m0110_usb/led.c
index f76545f0ba..3822a131b8 100644
--- a/converter/m0110_usb/led.c
+++ b/converter/m0110_usb/led.c
@@ -15,10 +15,18 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "stdint.h"
+#include <stdint.h>
+#include <avr/io.h>
 #include "led.h"
 
 
 void led_set(uint8_t usb_led)
 {
+    if (usb_led &  (1<<USB_LED_CAPS_LOCK)) {
+        DDRD |= (1<<6);
+        PORTD |= (1<<6);
+    } else {
+        DDRD |= (1<<6);
+        PORTD &= ~(1<<6);
+    }
 }