Fix README and doc

2 files changed, 111 insertions, 87 deletions

diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md
index f7e96126bc..b9e0b534a2 100644
--- a/keyboard/hhkb/README.md
+++ b/keyboard/hhkb/README.md
@@ -2,128 +2,144 @@ Alternative Controller for HHKB Pro
 ===================================
 I wanted to add some features like vi cursor and mouse keys to my [HHKB][HHKB] but its controller is not programmable and
 firmware source code is not open, of course. This means customizing this keyboard needs to replace original 
-controller with programmable one. For this purpose I used PJRC [Teensy++][Teensy] as alternative controller.
+controller with programmable one. This controller can work with HHKB Professional and Professional 2 model.
+
+See [this thread][AltController] in geekhack.org.
 
 [HHKB]: http://www.pfu.fujitsu.com/hhkeyboard/
+[AltController]: http://geekhack.org/index.php?topic=12047.0
 [Teensy]: http://www.pjrc.com/teensy/
 
 
-My keyboard firmware source tree is here: http://github.com/tmk/tmk_keyboard
-See directory keyboard/hhkb to build firmware for HHKB.
-
-
 ##Features
 * Customizable keymap
 * More keymap layers(more Fn keys)
 * Mouse keys
 * USB NKRO
 
+See README of [tmk_keyboard] for more.
+
+[tmk_keyboard]: http://github.com/tmk/tmk_keyboard
+ 
 ###Pros
+* No risk: Everything is all reversible
 * Without PCB trace cutting, case mod or any destructives
 * Can keep original controller intact
 * Can change all HHKB behaviour as you like
 
 ###Cons
 * Void your warranty
-* Lose USB hub function in case of Pro2
+* Lose USB hub function of Pro2
 
 ##DISCLAIMER
-I'm not a professional of electronics or MCU programming. This may damage your HHKB.
+I'm not a professional of electronics nor MCU programming. This may damage your HHKB.
 And my English writing is poor, I'm not sure I can convey my notions accurately.
 
 
+##Documents
+See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HHKB and this controller.
 
 
+##Build Firmware & Program
+You can choose some combination of hardware and USB protocol stack([LUFA], [PJRC]).
 
+### Install Tools
+See [this document](../../doc/build.md).
 
-##Build Firmware
-You can choose some combination of MCU and USB protocol stack.
-
-### Teensy++(AVR USB family) with [LUFA]
-0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
-
-1. Edit **keymap.c** to use your favoirte keymap.
-
-2. Edit **Makefile** if you want to use other `MCU` than Teensy++ 2.0.
+### TMK Alt Controller Board
+    $ make -f Makefile.tmk
 
-3. Build firmware binary file:
-    `$ make -f Makefile.lufa`
+This programs the controller with [dfu-programmer] if the tool is intalled and configured properly.
 
-4. Program MCU with PJRC [Teensy Loader] tool. If you install command line version of the loader just run:
-    `$  make -f Makefile.lufa teensy`
+    $ make -f Makefile.tmk dfu
 
-[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
-[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
+Push reset button and program with [FLIP]. The tool should be intalled and configured properly.
 
+    $ make -f Makefile.tmk flip
 
-###AVR Mega with [V-USB]
-Follow below if you want to use AVR with V-USB as .
+Or you can also program with FLIP GUI.
 
-0. Edit **matrix.c** to use your pin configuration. See doc/HHKB.txt for detail.
+[dfu-programmer]: http://dfu-programmer.sourceforge.net/
+[FLIP]: http://www.atmel.com/tools/FLIP.aspx
 
-1. Edit **keymap.c** to use your favoirte keymap.
 
-2. Edit **usbconfig.h** to configure V-USB options. 
+### PJRC Teensy++
+Build with [LUFA] USB stack:
 
-3. Edit **Makefile.vusb** to define `MCU` and `F_CPU`.
+    $ make -f Makefile.lufa
 
-4. Build firmware binary file:
-    `$ make -f Makefile.vusb`
+or with [PJRC] USB stack:
 
-5. Program MCU with AVR programmer like AVRISPmkII. If you already have [USBaspLoader] on MCU just run:
-    `$  make -f Makefile.vusb program`
+    $ make -f Makefile.pjrc
 
-[V-USB]: http://www.obdev.at/products/vusb/index.html
-[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
+Push reset button and program with [Teensy Loader(command line)]. The tool should be intalled and configured properly.
 
+    $  make -f Makefile.lufa teensy
+    $  make -f Makefile.pjrc teensy
 
-###How to Customize Keymap
-Later...
-See **keymap.c**.
+Or you can also program with [Teensy Loader(GUI)].
 
+[LUFA]: http://www.fourwalledcubicle.com/LUFA.php
+[PJRC]: http://www.pjrc.com/teensy/usb_keyboard.html
+[Teensy Loader(command line)]: http://www.pjrc.com/teensy/loader_cli.html
+[Teensy Loader(GUI)]: http://www.pjrc.com/teensy/loader.html
 
-##Hardware
 
-###Teensy++ installation
-Angled USB mini B adapter is used to install Teensy++ laterally.
+###AVR Mega with [V-USB]
+Build:
+    $ make -f Makefile.vusb
 
-![Image of Teensy install](hhkb/doc/HHKB_img/teensy_install.jpg)
+Program [USBaspLoader] on MCU with AVR programmer like [AVRISPmkII] and tool like [avrdude].
 
-Bread baord wires are used to connect Teensy++.
+You can programs with [avrdude] once you have programmed [USBaspLoader] on MCU.
+    $  make -f Makefile.vusb program
 
-![Image of Teensy wiring](hhkb/doc/HHKB_img/teensy_wiring.jpg)
+[AVRISPmkII]: http://www.atmel.com/tools/AVRISPMKII.aspx
+[avrdude]: http://www.nongnu.org/avrdude/
 
-![Image of Connector](hhkb/doc/HHKB_img/connector_contact.jpg)
 
+##How to Customize
+See [tmk_keyboard] documents.
 
-###PJRC Teensy++ 2.0 connection
-                            +---------------+
-                            |   Teensy++    |
-                            |               |
-                            |               |        HHKB
-                            |               |        ~~~~
-                            |          PB0-2|------->ROW(6-8)
-                            |          PB3-5|------->COL(9-11)
-                            |            PB6|------->ENABLE(12)
-                            |            PE6|<-------KEY(4)
-                            |            PE7|------->PREV(5)
-                            |               |
-                            |               |
-                            |               |
-                            +---------------+
 
+##Hardware
+You have some options for hardware. Development boards with USB AVR family(ATMega32U4, AT90USB1286) like Teensy will work while MegaAVR with V-USB library is also cheapear option for DIY.
+
+###1. TMK Alt Controller Board
+TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
+See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
+
+
+###2. PJRC Teensy++ 2.0 connection
+    +---------------+
+    |   Teensy++    |
+    |               |
+    |               |               HHKB pro    HHKB pro2
+    |               |               ~~~~~~~~    ~~~~~~~~~
+    |          PB0-2|------->ROW    (6-8)       (5-7)
+    |          PB3-5|------->COL    (9-11)      (8-10)
+    |            PB6|------->ENABLE (12)        (11)
+    |            PE6|<-------KEY    (4)         (3)
+    |            PE7|------->PREV   (5)         (4)
+    |               |
+    |               |   5V---       (1-3)       (1-2)
+    |               |  GND---       (13-14)     (12-13)
+    +---------------+
+
+- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
+[Teensy Loader]: http://www.pjrc.com/teensy/loader.html
 
-###V-USB circuit
+###3. V-USB connection
                     +---+   +---------------+
-    USB            GND  |   |   ATmega168   |
+    USB            GND  |   |   ATmega328p  |
     ~~~                 C3  |               |
-    5V <-------+--------+---|Vcc,AVCC       |        HHKB
-               R1           |               |        ~~~~
-    D- <----+--+-----R2-----|INT1      PB2-4|------->ROW(6-8)
-    D+ <----|---+----R3-----|INT0      PC0-2|------->COL(9-11)
-            Z1  Z2          |            PC3|------->ENABLE(12)
-    GND<----+---+-----------|GND         PB0|<-------KEY(4)
-                            |            PB1|------->PREV(5)
+    5V <-------+--------+---|Vcc,AVCC       |               HHKB pro    pro2
+               R1           |               |               ~~~~~~~~    ~~~~
+    D- <----+--+-----R2-----|INT1      PB2-4|------->ROW    (6-8)       (5-7)
+    D+ <----|---+----R3-----|INT0      PC0-2|------->COL    (9-11)      (8-10)
+            Z1  Z2          |            PC3|------->ENABLE (12)        (11)
+    GND<----+---+-----------|GND         PB0|<-------KEY    (4)         (3)
+                            |            PB1|------->PREV   (5)         (4)
                             |               |
                 GND+-C2--+--|XTAL1       RXD|------->Debug Console
                          X1 |            TXD|<-------Debug Console
@@ -134,5 +150,11 @@ Bread baord wires are used to connect Teensy++.
     Z1,Z2:  Zener 3.6V
     C1,C2:  22pF
     C3:     0.1uF
-    X1:     Crystal 20MHz(16MHz/12MHz)
-    SW:     Push Switch(Optional for bootloader)
+    X1:     Crystal 12MHz
+    SW:     Push Switch(for bootloader)
+
+- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
+- NOTE: [USBaspLoader] is very useful for firmware update.
+
+[V-USB]: http://www.obdev.at/products/vusb/index.html
+[USBaspLoader]: http://www.obdev.at/products/vusb/usbasploader.html
diff --git a/keyboard/hhkb/doc/HHKB.txt b/keyboard/hhkb/doc/HHKB.txt
index f99a074437..422c452c90 100644
--- a/keyboard/hhkb/doc/HHKB.txt
+++ b/keyboard/hhkb/doc/HHKB.txt
@@ -30,25 +30,27 @@ Connector Cable
 Two PCBs are connected by 15 lines(13 in case of Pro2).
 Vcc and GND use 3(2) lines each, other 9 lines are for keyboard signaling.
 
-    Keyswitch PCB connector                                 Teensy++ pins
-    -------------------------------------------------------------------------------
-     1  Vcc(5V)   Not exist on Pro2                         5V
-     2  Vcc(5V)                                             5V
-     3  Vcc(5V)                                             5V
-     4  TP1684    KEY: Low(0) when key pressed              PE6 input(with pullup)
-     5  TP1684    KEY_PREV: assert previous key state???    PE7 output
-     6  HC4051    A(bit0) select 8 rows(0 to 7)             PB0 output
-     7  HC4051    B(bit1)                                   PB1 output
-     8  HC4051    C(bit2)                                   PB2 output
-     9  LS145     A(bit0) select 8 columns(0 to 7)          PB3 output
-    10  LS145     B(bit1)                                   PB4 output
-    11  LS145     C(bit2)                                   PB5 output
-    12  LS145     D(enable) Low(0) enable selected column   PB6 output
-    13  GND                                                 GND
-    14  GND                                                 GND
-    15  GND       Not exist on Pro2                         GND
+    Keyswitch connector
+    pro  pro2           Description                               Teensy++ pins
+    --------------------------------------------------------------------------------------------
+     1       Vcc(5V)    Not exist on Pro2                         5V
+     2   1   Vcc(5V)                                              5V
+     3   2   Vcc(5V)                                              5V
+     4   3   TP1684     KEY: Low(0) when key pressed              PE6 input(with pullup)
+     5   4   TP1684     KEY_PREV: make threshold                  PE7 output
+     6   5   HC4051     A(bit0)\                                  PB0 output
+     7   6   HC4051     B(bit1) > select row(0 to 7)              PB1 output
+     8   7   HC4051     C(bit2)/                                  PB2 output
+     9   8   LS145      A(bit0)\                                  PB3 output
+    10   9   LS145      B(bit1) > select column(0 to 7)           PB4 output
+    11  10   LS145      C(bit2)/                                  PB5 output
+    12  11   LS145      D(enable) Low(0) enables selected column  PB6 output
+    13  12   GND                                                  GND
+    14  13   GND                                                  GND
+    15       GND        Not exist on Pro2                         GND
 
     NOTE: guessing pin5(KEY_PREV) may work for hysteresis of capacitive sensing.
+    NOTE: 1KOhm didn't work as pullup resistor on KEY. AVR internal pullup or 10KOhm resistor was OK.
 
     (HHKB_connector.jpg)