summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2011-05-25 10:37:58 +0900
committertmk <nobody@nowhere>2011-05-25 11:30:14 +0900
commitaf85b6bba6744573f1edecd26fb504c31094414f (patch)
tree3ba304c36fa36c83d06123b569c77b68b801e7cd
parent74f7e19863ced21bf5d27c1fb1207f79f2195e24 (diff)
added HHKB/README and clean some codes.
-rw-r--r--[-rwxr-xr-x]adb.c0
-rw-r--r--[-rwxr-xr-x]adb_usb/Makefile2
-rw-r--r--[-rwxr-xr-x]adb_usb/matrix.c0
-rw-r--r--[-rwxr-xr-x]command.c0
-rw-r--r--[-rwxr-xr-x]hhkb/Makefile11
-rw-r--r--hhkb/Makefile.vusb11
-rw-r--r--hhkb/README80
-rw-r--r--hhkb/config_pjrc.h (renamed from hhkb/config.h)0
-rw-r--r--hhkb/config_vusb.h88
-rw-r--r--[-rwxr-xr-x]hhkb/doc/HHKB_TP1684.jpgbin149082 -> 149082 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/HHKB_chart1.jpgbin155342 -> 155342 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/HHKB_chart2.jpgbin148225 -> 148225 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/HHKB_connector.jpgbin193900 -> 193900 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/HHKB_controller.jpgbin135100 -> 135100 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/HHKB_keyswitch.jpgbin171469 -> 171469 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/connector_contact.jpgbin192830 -> 192830 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/logic_analyzer.jpgbin169564 -> 169564 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/probe_contact.jpgbin208477 -> 208477 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/teensy_install.jpgbin135851 -> 135851 bytes
-rw-r--r--[-rwxr-xr-x]hhkb/doc/teensy_wiring.jpgbin154695 -> 154695 bytes
-rw-r--r--macway/Makefile4
-rw-r--r--[-rwxr-xr-x]ps2_usb/Makefile9
-rw-r--r--ps2_usb/Makefile.vusb9
23 files changed, 111 insertions, 103 deletions
diff --git a/adb.c b/adb.c
index 006e424a92..006e424a92 100755..100644
--- a/adb.c
+++ b/adb.c
diff --git a/adb_usb/Makefile b/adb_usb/Makefile
index 92b9ba1a93..802b4248cb 100755..100644
--- a/adb_usb/Makefile
+++ b/adb_usb/Makefile
@@ -38,7 +38,7 @@ F_CPU = 16000000
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
diff --git a/adb_usb/matrix.c b/adb_usb/matrix.c
index db202896f5..db202896f5 100755..100644
--- a/adb_usb/matrix.c
+++ b/adb_usb/matrix.c
diff --git a/command.c b/command.c
index ca149dbd08..ca149dbd08 100755..100644
--- a/command.c
+++ b/command.c
diff --git a/hhkb/Makefile b/hhkb/Makefile
index 4a0af1cdcb..e1cc2f2106 100755..100644
--- a/hhkb/Makefile
+++ b/hhkb/Makefile
@@ -1,5 +1,10 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
# Target file name (without extension).
-TARGET = hhkb
+TARGET = hhkb_pjrc
# Directory common source filess exist
COMMON_DIR = ..
@@ -13,7 +18,7 @@ TARGET_SRC = main_pjrc.c \
matrix.c \
led.c
-CONFIG_H = config.h
+CONFIG_H = config_pjrc.h
# MCU name, you MUST set this to match the board you are using
@@ -36,7 +41,7 @@ F_CPU = 16000000
# comment out to disable the options.
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+USB_EXTRA_ENABLE = yes # Audio control and System control
USB_NKRO_ENABLE = yes # USB Nkey Rollover
diff --git a/hhkb/Makefile.vusb b/hhkb/Makefile.vusb
index 7826ffd025..77841b824c 100644
--- a/hhkb/Makefile.vusb
+++ b/hhkb/Makefile.vusb
@@ -1,3 +1,8 @@
+#
+# Makefile for V-USB
+#
+
+
# Target file name (without extension).
TARGET = hhkb_vusb
@@ -23,10 +28,6 @@ OPT_DEFS = -DDEBUG_LEVEL=0
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-#MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
MCU = atmega168
@@ -42,7 +43,7 @@ F_CPU = 20000000
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
diff --git a/hhkb/README b/hhkb/README
new file mode 100644
index 0000000000..2a44181016
--- /dev/null
+++ b/hhkb/README
@@ -0,0 +1,80 @@
+Alternative Controller for HHKB
+===============================
+
+Feature
+-------
+- Mouse Keys
+- NKRO on USB
+- Keymap Layers
+
+
+Customize Keymap
+----------------
+see keymap.c.
+
+
+Build for Teensy
+----------------
+0. Edit matrix.c.
+ adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
+1. Define macros in config_pjrc.h.(Optional)
+ VENDOR_ID, PRODUCT_ID and string descriptor.
+ IS_COMMAND
+2. Edit Makefile for MCU setting and build options.
+ MCU, F_CPU
+ MOUSEKEY_ENABLE, USB_EXTRA_ENABLE, USB_NKRO_ENABLE
+3. Build hex file.
+ $ make
+4. Program MCU.
+ $ make program
+
+
+Build for V-USB
+---------------
+0. Edit matrix.c and usbconfig.h.
+ adjust scan code to your pin configuration.(see doc/HHKB.txt for pinouts)
+ define macros for V-USB in usbconfig.h.
+1. Define macros in config_vusb.h.(Optional)
+ IS_COMMAND
+2. Edit Makefile.vusb for MCU setting and build options.
+ MCU, F_CPU
+ MOUSEKEY_ENABLE, USB_EXTRA_ENABLE, USB_NKRO_ENABLE
+3. Build hex file.
+ $ make -f Makefile.vusb
+4. Program MCU.
+ $ make -f Makefile.vusb program
+
+ Using a bootloader to program for convenience is recommended.
+ Once program this V-USB bootloader at first, you can program MCU without
+ extra programmer. You should have reset switch to start up as bootloader
+ mode in this case.
+ USBaspLoader:
+ http://www.obdev.at/products/vusb/usbasploader.html
+
+
+V-USB Circuit
+-------------
+ +---+ +---------------+
+USB GND | | ATmega168 |
+=== C3 | |
+5V <-------+--------+---|Vcc,AVCC | HHKB
+ R1 | | ====
+D- <----+--+-----R2-----|INT1 PB0-2|------->ROW
+D+ <----|---+----R3-----|INT0 PB3-5|------->COL
+ Z1 Z2 | PB6|------->ENABLE
+GND<----+---+--+--+-----|GND PE6|------->KEY
+ | | | PE7|------->PREV
+ | C2-+--|XTAL1 | (see doc/HHKB.txt for pinouts)
+ | X1 | |
+ +--C3-+--|XTAL2 RST|---SW--+GND
+ +---------------+
+R1: 1.5K Ohm
+R2,R3: 68 Ohm
+Z1,Z2: Zener 3.6V
+C1,C2: 22pF
+C3: 0.1uF
+X1: Crystal 20MHz(16MHz/12MHz)
+SW: Push Switch(Optional for bootloader)
+
+
+EOF
diff --git a/hhkb/config.h b/hhkb/config_pjrc.h
index 886eef928a..886eef928a 100644
--- a/hhkb/config.h
+++ b/hhkb/config_pjrc.h
diff --git a/hhkb/config_vusb.h b/hhkb/config_vusb.h
index 3b44b94a31..7c4291a213 100644
--- a/hhkb/config_vusb.h
+++ b/hhkb/config_vusb.h
@@ -29,92 +29,4 @@
#endif
-/* PS/2 lines */
-#ifdef PS2_MOUSE_ENABLE
-
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 4
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-
-
-// Synchronous USART is used to receive data from keyboard.
-// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK.
-// NOTE: This is recomended strongly if you use V-USB library.
-#define PS2_USE_USART
-
-// External or Pin Change Interrupt is used to receive data from keyboard.
-// Use INT1 or PCINTxx for PS/2 CLOCK line. see below.
-//#define PS2_USE_INT
-
-
-#ifdef PS2_USE_USART
-// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge
-// set DDR of CLOCK as input to be slave
-#define PS2_USART_INIT() do { \
- PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
- PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
- UCSR0C = ((1 << UMSEL00) | \
- (3 << UPM00) | \
- (0 << USBS0) | \
- (3 << UCSZ00) | \
- (0 << UCPOL0)); \
- UCSR0A = 0; \
- UBRR0H = 0; \
- UBRR0L = 0; \
-} while (0)
-#define PS2_USART_RX_INT_ON() do { \
- UCSR0B = ((1 << RXCIE0) | \
- (1 << RXEN0)); \
-} while (0)
-#define PS2_USART_RX_POLL_ON() do { \
- UCSR0B = (1 << RXEN0); \
-} while (0)
-#define PS2_USART_OFF() do { \
- UCSR0C = 0; \
- UCSR0B &= ~((1 << RXEN0) | \
- (1 << TXEN0)); \
-} while (0)
-#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
-#define PS2_USART_RX_DATA UDR0
-#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
-#define PS2_USART_RX_VECT USART_RX_vect
-#endif
-
-
-#ifdef PS2_USE_INT
-/* INT1
-#define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
-} while (0)
-#define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
-} while (0)
-#define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
-} while (0)
-#define PS2_INT_VECT INT1_vect
-*/
-
-/* PCINT20 */
-#define PS2_INT_INIT() do { \
- PCICR |= (1<<PCIE2); \
-} while (0)
-#define PS2_INT_ON() do { \
- PCMSK2 |= (1<<PCINT20); \
-} while (0)
-#define PS2_INT_OFF() do { \
- PCMSK2 &= ~(1<<PCINT20); \
- PCICR &= ~(1<<PCIE2); \
-} while (0)
-#define PS2_INT_VECT PCINT2_vect
-#endif
-
-#endif
-
#endif
diff --git a/hhkb/doc/HHKB_TP1684.jpg b/hhkb/doc/HHKB_TP1684.jpg
index 0a03164094..0a03164094 100755..100644
--- a/hhkb/doc/HHKB_TP1684.jpg
+++ b/hhkb/doc/HHKB_TP1684.jpg
Binary files differ
diff --git a/hhkb/doc/HHKB_chart1.jpg b/hhkb/doc/HHKB_chart1.jpg
index 1f09bd185c..1f09bd185c 100755..100644
--- a/hhkb/doc/HHKB_chart1.jpg
+++ b/hhkb/doc/HHKB_chart1.jpg
Binary files differ
diff --git a/hhkb/doc/HHKB_chart2.jpg b/hhkb/doc/HHKB_chart2.jpg
index 45f5ada905..45f5ada905 100755..100644
--- a/hhkb/doc/HHKB_chart2.jpg
+++ b/hhkb/doc/HHKB_chart2.jpg
Binary files differ
diff --git a/hhkb/doc/HHKB_connector.jpg b/hhkb/doc/HHKB_connector.jpg
index e8a09e9b28..e8a09e9b28 100755..100644
--- a/hhkb/doc/HHKB_connector.jpg
+++ b/hhkb/doc/HHKB_connector.jpg
Binary files differ
diff --git a/hhkb/doc/HHKB_controller.jpg b/hhkb/doc/HHKB_controller.jpg
index e3dae8e86c..e3dae8e86c 100755..100644
--- a/hhkb/doc/HHKB_controller.jpg
+++ b/hhkb/doc/HHKB_controller.jpg
Binary files differ
diff --git a/hhkb/doc/HHKB_keyswitch.jpg b/hhkb/doc/HHKB_keyswitch.jpg
index 3afc269e7b..3afc269e7b 100755..100644
--- a/hhkb/doc/HHKB_keyswitch.jpg
+++ b/hhkb/doc/HHKB_keyswitch.jpg
Binary files differ
diff --git a/hhkb/doc/connector_contact.jpg b/hhkb/doc/connector_contact.jpg
index 5304bc8d7e..5304bc8d7e 100755..100644
--- a/hhkb/doc/connector_contact.jpg
+++ b/hhkb/doc/connector_contact.jpg
Binary files differ
diff --git a/hhkb/doc/logic_analyzer.jpg b/hhkb/doc/logic_analyzer.jpg
index f1b438ae77..f1b438ae77 100755..100644
--- a/hhkb/doc/logic_analyzer.jpg
+++ b/hhkb/doc/logic_analyzer.jpg
Binary files differ
diff --git a/hhkb/doc/probe_contact.jpg b/hhkb/doc/probe_contact.jpg
index dc79afa0cc..dc79afa0cc 100755..100644
--- a/hhkb/doc/probe_contact.jpg
+++ b/hhkb/doc/probe_contact.jpg
Binary files differ
diff --git a/hhkb/doc/teensy_install.jpg b/hhkb/doc/teensy_install.jpg
index 873d988edb..873d988edb 100755..100644
--- a/hhkb/doc/teensy_install.jpg
+++ b/hhkb/doc/teensy_install.jpg
Binary files differ
diff --git a/hhkb/doc/teensy_wiring.jpg b/hhkb/doc/teensy_wiring.jpg
index 1c4eb67434..1c4eb67434 100755..100644
--- a/hhkb/doc/teensy_wiring.jpg
+++ b/hhkb/doc/teensy_wiring.jpg
Binary files differ
diff --git a/macway/Makefile b/macway/Makefile
index c603ca7b98..6e7fa7fd9f 100644
--- a/macway/Makefile
+++ b/macway/Makefile
@@ -37,13 +37,13 @@ F_CPU = 16000000
#
MOUSEKEY_ENABLE = yes # Mouse keys
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover
#---------------- Programming Options --------------------------
-PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
diff --git a/ps2_usb/Makefile b/ps2_usb/Makefile
index 605962915f..a548b56d4c 100755..100644
--- a/ps2_usb/Makefile
+++ b/ps2_usb/Makefile
@@ -1,5 +1,10 @@
+#
+# Makefile for PJRC Teensy
+#
+
+
# Target file name (without extension).
-TARGET = ps2_usb
+TARGET = ps2_usb_pjrc
# Directory common source filess exist
COMMON_DIR = ..
@@ -37,7 +42,7 @@ F_CPU = 16000000
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
-USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+USB_EXTRA_ENABLE = yes # Audio control and System control
USB_NKRO_ENABLE = yes # USB Nkey Rollover
diff --git a/ps2_usb/Makefile.vusb b/ps2_usb/Makefile.vusb
index 6e49fc44dd..ff86d7998a 100644
--- a/ps2_usb/Makefile.vusb
+++ b/ps2_usb/Makefile.vusb
@@ -1,5 +1,10 @@
+#
+# Makefile for V-USB
+#
+
+
# Target file name (without extension).
-TARGET = ps2_vusb
+TARGET = ps2_usb_vusb
# Directory common source filess exist
COMMON_DIR = ..
@@ -43,7 +48,7 @@ F_CPU = 20000000
# comment out to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
-#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
+USB_EXTRA_ENABLE = yes # Audio control and System control
#USB_NKRO_ENABLE = yes # USB Nkey Rollover