/* Copyright 2020 ademey "MsMustard" * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* key matrix size */ // SWAP FOR PRO MICRO // #define MATRIX_ROWS 8 #define MATRIX_ROWS 9 #define MATRIX_COLS 6 /* key matrix pins */ // SWAP FOR PRO MICRO // #define MATRIX_ROW_PINS { D2, D7, E6, B4, B5, B6, B2, B3 } #define MATRIX_ROW_PINS { D2, D7, E6, B4, B5, B6, B2, B3, F0 } #define MATRIX_COL_PINS { D3, F4, F5, F6, F7, B1 } #define DIODE_DIRECTION COL2ROW /* ROTARY ENCODERS */ /* 4 encoder positions are supported. With multiple encoder support when using the extra pins of Elite-C controller. Use the following configuration guides for your encoder layout. */ /* PRO MICRO CONFIGURATIONS */ /* If using a Pro Micro, only 1 encoder may be used, and only in the top or bottom position. Top and bottom encoders share the same net, so there is only one configuration. */ /* TOP or BOTTOM */ // #define ENCODERS_PAD_A { C6 } // #define ENCODERS_PAD_B { D4 } /* ELITE-C ONLY CONFIGURATIONS */ /* TOP 3 Default configuration */ #define ENCODERS_PAD_A { C6 , B7, C7 } #define ENCODERS_PAD_B { D4 , D5, F1 } /* BOTTOM 3 */ // #define ENCODERS_PAD_A { B7, C7, C6 } // #define ENCODERS_PAD_B { D5, F1, D4 } /* BOTTOM 2 */ // #define ENCODERS_PAD_A { C7, C6 } // #define ENCODERS_PAD_B { F1, D4 } #define ENCODER_RESOLUTION 2 #define BACKLIGHT_LEVELS 5 #ifdef LED_MATRIX_ENABLE #define LED_DRIVER_ADDR_1 0x74 #define LED_DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 105 #define LED_MATRIX_ROWS 15 #define LED_MATRIX_COLS 7 #define LED_MATRIX_MAXIMUM_BRIGHTNESS 20 #define LED_DISABLE_WHEN_USB_SUSPENDED // LED Matrix Animation modes. Explicitly enabled // For full list of effects, see: // https://docs.qmk.fm/#/feature_led_matrix?id=led-matrix-effects // # define ENABLE_LED_MATRIX_ALPHAS_MODS // # define ENABLE_LED_MATRIX_BREATHING // # define ENABLE_LED_MATRIX_BAND // # define ENABLE_LED_MATRIX_BAND_PINWHEEL // # define ENABLE_LED_MATRIX_BAND_SPIRAL // # define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT // # define ENABLE_LED_MATRIX_CYCLE_UP_DOWN // # define ENABLE_LED_MATRIX_CYCLE_OUT_IN // # define ENABLE_LED_MATRIX_DUAL_BEACON // # if defined(LED_MATRIX_KEYREACTIVE_ENABLED) // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS // # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS // # define ENABLE_LED_MATRIX_SPLASH // # define ENABLE_LED_MATRIX_MULTISPLASH // # endif // # define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT // # define ENABLE_LED_MATRIX_WAVE_UP_DOWN #endif /* Terrazzo animations */ // #define DISABLE_TERRAZZO_EFFECT_STRIPES // #define DISABLE_TERRAZZO_EFFECT_DINO // #define DISABLE_TERRAZZO_EFFECT_OUTRUN #define DISABLE_TERRAZZO_EFFECT_PAC_DUDE #define DISABLE_TERRAZZO_EFFECT_HEART // #define DISABLE_TERRAZZO_EFFECT_WPM_CHART #define DISABLE_TERRAZZO_EFFECT_DOT