/* * Copyright 2018 Jack Humbert <jack.humb@gmail.com> * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once /* USB Device descriptor parameter */ #define PRODUCT_ID 0xA4F9 #define DEVICE_VER 0x0006 #undef MATRIX_ROWS #undef MATRIX_COLS /* key matrix size */ #define MATRIX_ROWS 8 #define MATRIX_COLS 6 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ /* Note: These are not used for arm boards. They're here purely as documentation. */ #undef MATRIX_ROW_PINS #undef MATRIX_COL_PINS #define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 } #define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 } #define UNUSED_PINS #define ENCODERS_PAD_A { B12 } #define ENCODERS_PAD_B { B13 } #define DIP_SWITCH_PINS { B14, A15, A0, B9 } #define MUSIC_MAP #undef AUDIO_VOICES #undef AUDIO_PIN #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 #define AUDIO_PIN_ALT_AS_NEGATIVE /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ // #define DEBOUNCE 6 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT /* * WS2812 Underglow Matrix options */ #define RGB_DI_PIN A1 #define RGBLED_NUM 9 #define DRIVER_LED_TOTAL RGBLED_NUM #define WS2812_PWM_DRIVER PWMD2 #define WS2812_PWM_CHANNEL 2 #define WS2812_PWM_PAL_MODE 1 #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 #define WS2812_DMA_CHANNEL 2 #define RGB_DISABLE_WHEN_USB_SUSPENDED