/* Copyright 2020 ZSA Technology Labs, Inc <@zsa> * Copyright 2020 Jack Humbert <jack.humb@gmail.com> * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ // clang-format off #define VENDOR_ID 0x3297 #define PRODUCT_ID 0x1969 #define MANUFACTURER ZSA Technology Labs #define PRODUCT Moonlander Mark I #define DEVICE_VER 0x0001 #define WEBUSB_LANDING_PAGE_URL u8"configure.ergodox-ez.com" // clang-format on /* key matrix size */ #define MATRIX_ROWS 12 #define MATRIX_COLS 7 /* PCB default pin-out */ // #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 } // #define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 } // #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 } // #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 } // #define MCP23_LED_R GPB7 // #define MCP23_LED_G GPB6 // #define MCP23_LED_B GPA7 #define EEPROM_I2C_24LC128 // Not needed, is default address: // #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION #define DRIVER_ADDR_1 0b1110100 #define DRIVER_ADDR_2 0b1110111 #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 36 #define DRIVER_2_LED_TOTAL 36 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) #define RGB_MATRIX_CENTER { 125, 26 } #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES #define RGB_DISABLE_WHEN_USB_SUSPENDED #define MUSIC_MAP #define FIRMWARE_VERSION_SIZE 17 #define DYNAMIC_KEYMAP_EEPROM_ADDR (EECONFIG_SIZE + FIRMWARE_VERSION_SIZE) #ifdef EEPROM_I2C # define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 16383 # define DYNAMIC_KEYMAP_LAYER_COUNT 32 #endif #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 #define AUDIO_PIN_ALT_AS_NEGATIVE