/* Copyright 2021 peepeetee This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0x4B50 //KP #define PRODUCT_ID 0xEF83 #define DEVICE_VER 0x0001 #define MANUFACTURER KPRepublic #define PRODUCT BM80HSRGB /* key matrix size */ #define MATRIX_ROWS 6 #define MATRIX_COLS 17 /* * Keyboard Matrix Assignments * * Change this to how you wired your keyboard * COLS: AVR pins used for columns, left to right * ROWS: AVR pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS { B3, B2, B1, B0, C6, C7 } #define MATRIX_COL_PINS { F0, F1, F4, D7, D6, D4, D5, D3, D2, F5, F6, F7, D1, D0, B4, B5, B6 } #define UNUSED_PINS /* COL2ROW, ROW2COL */ #define DIODE_DIRECTION COL2ROW #define LED_CAPS_LOCK_PIN E6 #define LED_PIN_ON_STATE 0 #define RGB_DI_PIN E2 // The number of LEDs connected #define DRIVER_LED_TOTAL 87 #ifdef RGB_DI_PIN #define RGBLED_NUM 87 #define RGB_MATRIX_KEYPRESSES // reacts to keypresses //#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_TIMEOUT 0 // number of milliseconds to wait until rgb automatically turns off //#define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set #define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set #define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set #define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set // #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature) #define ENABLE_RGB_MATRIX_ALPHAS_MODS #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT #define ENABLE_RGB_MATRIX_BREATHING #define ENABLE_RGB_MATRIX_BAND_SAT #define ENABLE_RGB_MATRIX_BAND_VAL #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL #define ENABLE_RGB_MATRIX_CYCLE_ALL #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL #define ENABLE_RGB_MATRIX_DUAL_BEACON #define ENABLE_RGB_MATRIX_RAINBOW_BEACON #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS #define ENABLE_RGB_MATRIX_RAINDROPS #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS #define ENABLE_RGB_MATRIX_HUE_BREATHING #define ENABLE_RGB_MATRIX_HUE_PENDULUM #define ENABLE_RGB_MATRIX_HUE_WAVE #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL #define ENABLE_RGB_MATRIX_PIXEL_RAIN #define ENABLE_RGB_MATRIX_TYPING_HEATMAP #define ENABLE_RGB_MATRIX_DIGITAL_RAIN #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS #define ENABLE_RGB_MATRIX_SPLASH #define ENABLE_RGB_MATRIX_MULTISPLASH #define ENABLE_RGB_MATRIX_SOLID_SPLASH #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended // does not work for some reason, might revisit #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION