# MCU name MCU = MK20DX128 # Linker script to use # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ # or <this_dir>/ld/ # - NOTE: a custom ld script is needed for EEPROM on Teensy LC # - LDSCRIPT = # - MKL26Z64 for Teensy LC # - MK20DX128 for Teensy 3.0 # - MK20DX256 for Teensy 3.1 and 3.2 # - MK20DX128BLDR4 for Infinity with Kiibohd bootloader MCU_LDSCRIPT = MK20DX128BLDR4 # Board: it should exist either in <chibios>/os/hal/boards/ # or <this_dir>/boards # - BOARD = # - PJRC_TEENSY_LC for Teensy LC # - PJRC_TEENSY_3 for Teensy 3.0 # - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 # - MCHCK_K20 for Infinity KB BOARD = MCHCK_K20 # Vector table for application # 0x00000000-0x00001000 area is occupied by bootlaoder.*/ # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000 BOOTLOADER = dfu # Build Options # comment out to disable the options. # DFU_ARGS = -d 1c11:b007 DFU_SUFFIX_ARGS = -p b007 -v 1c11 BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover CUSTOM_MATRIX = yes # Custom matrix file # project specific files SRC = matrix.c \ led.c \ led_controller.c LAYOUTS = 60_ansi_split_bs_rshift # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE