/* Copyright 2012 Jun Wako <wakojun@gmail.com> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0x4848 // HH = happy hacking #define PRODUCT_ID 0x0002 // HHKB JP #define DEVICE_VER 0x0104 #define MANUFACTURER q.m.k #define PRODUCT HHKB mod #define DESCRIPTION q.m.k keyboard firmware for HHKB /* key matrix size */ #define MATRIX_ROWS 16 #define MATRIX_COLS 8 #define TAPPING_TERM 200 /* number of backlight levels */ #define BACKLIGHT_LEVELS 3 /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE #ifdef HHKB_RN42_ENABLE // rn42 support -- acquired from the tmk repo. This is almost certainly not // integrated with qmk in the correct way. #define SUART_OUT_PORT PORTD #define SUART_OUT_BIT 0 #define SUART_IN_PIN PIND #define SUART_IN_BIT 1 #ifdef __AVR_ATmega32U4__ #define SERIAL_UART_BAUD 115200 #define SERIAL_UART_DATA UDR1 #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5)) #define SERIAL_UART_RXD_VECT USART1_RX_vect #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) #define SERIAL_UART_INIT() do { \ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \ UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \ UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \ DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \ sei(); \ } while(0) #define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0) #define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0) #else #error "USART configuration is needed." #endif /* power control of key switch board */ #define HHKB_POWER_SAVING #endif /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION