#pragma once #include <stdint.h> #include <stdbool.h> #include <avr/io.h> #include <avr/interrupt.h> #include <util/delay.h> // Timer resolution check #if (1000000/TIMER_RAW_FREQ > 20) # error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB." #endif /* * HHKB Matrix I/O * * row: HC4051[A,B,C] selects scan row0-7 * row-ext: [En0,En1] row extention for JP * col: LS145[A,B,C,D] selects scan col0-7 and enable(D) * key: on: 0/off: 1 * prev: hysteresis control: assert(1) when previous key state is on */ #if defined(__AVR_ATmega32U4__) /* * For TMK HHKB alt controller(ATMega32U4) * * row: PB0-2 * col: PB3-5,6 * key: PD7(pull-uped) * prev: PB7 * power: PD4(L:off/H:on) * row-ext: PC6,7 for HHKB JP(active low) */ static inline void KEY_ENABLE(void) { (PORTB &= ~(1<<6)); } static inline void KEY_UNABLE(void) { (PORTB |= (1<<6)); } static inline bool KEY_STATE(void) { return (PIND & (1<<7)); } static inline void KEY_PREV_ON(void) { (PORTB |= (1<<7)); } static inline void KEY_PREV_OFF(void) { (PORTB &= ~(1<<7)); } #ifdef HHKB_POWER_SAVING static inline void KEY_POWER_ON(void) { DDRB = 0xFF; PORTB = 0x40; // change pins output DDRD |= (1<<4); PORTD |= (1<<4); // MOS FET switch on /* Without this wait you will miss or get false key events. */ _delay_ms(5); // wait for powering up } static inline void KEY_POWER_OFF(void) { /* input with pull-up consumes less than without it when pin is open. */ DDRB = 0x00; PORTB = 0xFF; // change pins input with pull-up DDRD |= (1<<4); PORTD &= ~(1<<4); // MOS FET switch off } static inline bool KEY_POWER_STATE(void) { return PORTD & (1<<4); } #else static inline void KEY_POWER_ON(void) {} static inline void KEY_POWER_OFF(void) {} static inline bool KEY_POWER_STATE(void) { return true; } #endif static inline void KEY_INIT(void) { /* row,col,prev: output */ DDRB = 0xFF; PORTB = 0x40; // unable /* key: input with pull-up */ DDRD &= ~0x80; PORTD |= 0x80; KEY_UNABLE(); KEY_PREV_OFF(); KEY_POWER_OFF(); } static inline void KEY_SELECT(uint8_t ROW, uint8_t COL) { PORTB = (PORTB & 0xC0) | (((COL) & 0x07)<<3) | ((ROW) & 0x07); } #elif defined(__AVR_AT90USB1286__) /* * For Teensy++(AT90USB1286) * * HHKB pro HHKB pro2 * row: PB0-2 (6-8) (5-7) * col: PB3-5,6 (9-12) (8-11) * key: PE6(pull-uped) (4) (3) * prev: PE7 (5) (4) * * TODO: convert into 'staitc inline' function */ #define KEY_INIT() do { \ DDRB |= 0x7F; \ DDRE |= (1<<7); \ DDRE &= ~(1<<6); \ PORTE |= (1<<6); \ } while (0) #define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \ (((COL) & 0x07)<<3) | \ ((ROW) & 0x07)) #define KEY_ENABLE() (PORTB &= ~(1<<6)) #define KEY_UNABLE() (PORTB |= (1<<6)) #define KEY_STATE() (PINE & (1<<6)) #define KEY_PREV_ON() (PORTE |= (1<<7)) #define KEY_PREV_OFF() (PORTE &= ~(1<<7)) #define KEY_POWER_ON() #define KEY_POWER_OFF() #define KEY_POWER_STATE() true #else # error "define code for matrix scan" #endif #if 0 // For ATMega328P with V-USB // // #elif defined(__AVR_ATmega328P__) // Ports for V-USB // key: PB0(pull-uped) // prev: PB1 // row: PB2-4 // col: PC0-2,3 // power: PB5(Low:on/Hi-z:off) #define KEY_INIT() do { \ DDRB |= 0x3E; \ DDRB &= ~(1<<0); \ PORTB |= 1<<0; \ DDRC |= 0x0F; \ KEY_UNABLE(); \ KEY_PREV_OFF(); \ } while (0) #define KEY_SELECT(ROW, COL) do { \ PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \ PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \ } while (0) #define KEY_ENABLE() (PORTC &= ~(1<<3)) #define KEY_UNABLE() (PORTC |= (1<<3)) #define KEY_STATE() (PINB & (1<<0)) #define KEY_PREV_ON() (PORTB |= (1<<1)) #define KEY_PREV_OFF() (PORTB &= ~(1<<1)) // Power supply switching #define KEY_POWER_ON() do { \ KEY_INIT(); \ PORTB &= ~(1<<5); \ _delay_ms(1); \ } while (0) #define KEY_POWER_OFF() do { \ DDRB &= ~0x3F; \ PORTB &= ~0x3F; \ DDRC &= ~0x0F; \ PORTC &= ~0x0F; \ } while (0) #endif