/* * Copyright 2017 skully <skullydazed@gmail.com> * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ #define VENDOR_ID 0xC1ED #define PRODUCT_ID 0x2350 #define DEVICE_VER 0x0001 #define MANUFACTURER Clueboard #define PRODUCT Clueboard 60% #define DESCRIPTION Clueboard 60% /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up here: * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf */ #define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 /* key matrix size */ #define MATRIX_ROWS 5 #define MATRIX_COLS 15 /* * Keyboard Matrix Assignments * * COLS: Pins used for columns, left to right * ROWS: Pins used for rows, top to bottom * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ #define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 } #define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C15, C14, C13, B5, B6 } #define UNUSED_PINS { A0, A1, A9, B7, B8, B9, B10, B11, B12, B13 } #define DIODE_DIRECTION COL2ROW /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 6 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ //#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ //#define LOCKING_RESYNC_ENABLE /* * Force NKRO * * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the * makefile for this to work.) * * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) * until the next keyboard reset. * * NKRO may prevent your keystrokes from being detected in the BIOS, but it is * fully operational during normal computer usage. * * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by * bootmagic, NKRO mode will always be enabled until it is toggled again during a * power-up. * */ //#define FORCE_NKRO /* * Feature disable options * These options are also useful to firmware size reduction. */ /* disable debug print */ //#define NO_DEBUG /* disable print */ //#define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION /* * MIDI options */ /* Prevent use of disabled MIDI features in the keymap */ //#define MIDI_ENABLE_STRICT 1 /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ //#define MIDI_BASIC /* enable advanced MIDI features: - MIDI notes can be added to the keymap - Octave shift and transpose - Virtual sustain, portamento, and modulation wheel - etc. */ //#define MIDI_ADVANCED /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 #define LED_CAPS_LOCK_PIN B7 /* Backlight configuration */ #define BACKLIGHT_LEVELS 1