From f6d56675f9f981c5464f0ca7a1fbb0162154e8c5 Mon Sep 17 00:00:00 2001 From: tmk Date: Wed, 13 May 2015 11:13:10 +0900 Subject: Squashed 'tmk_core/' changes from caca2c0..dc0e46e dc0e46e Rename LUFA to LUFA-git 3bfa7fa Remove LUFA-120730 215b764 Merge commit 'afa0f22a9299686fd88f58ce09c5b521ac917e8f' as 'protocol/lufa/LUFA' afa0f22 Squashed 'protocol/lufa/LUFA/' content from commit def7fca c0c42fa Remove submodule of LUFA 30f897d Merge commit '87ced33feb74e79c3281dda36eb6d6d153399b41' as 'protocol/usb_hid/USB_Host_Shield_2.0' 87ced33 Squashed 'protocol/usb_hid/USB_Host_Shield_2.0/' content from commit aab4a69 14f6d49 Remove submodule of USB_Host_Shield_2.0 git-subtree-dir: tmk_core git-subtree-split: dc0e46eaa4367d4e218f8816e3c117895820f07c --- protocol/lufa/LUFA-git | 1 - .../CodeTemplates/DeviceTemplate/Descriptors.c | 180 +++++++++++++++++ .../CodeTemplates/DeviceTemplate/Descriptors.h | 59 ++++++ .../DeviceTemplate/DeviceApplication.c | 106 ++++++++++ .../DeviceTemplate/DeviceApplication.h | 53 +++++ .../LUFA/CodeTemplates/DeviceTemplate/asf.xml | 55 +++++ .../LUFA/CodeTemplates/DriverStubs/Board.h | 82 ++++++++ .../LUFA/CodeTemplates/DriverStubs/Buttons.h | 90 +++++++++ .../LUFA/CodeTemplates/DriverStubs/Dataflash.h | 223 +++++++++++++++++++++ .../LUFA/CodeTemplates/DriverStubs/Joystick.h | 102 ++++++++++ .../LUFA-git/LUFA/CodeTemplates/DriverStubs/LEDs.h | 130 ++++++++++++ .../CodeTemplates/HostTemplate/HostApplication.c | 133 ++++++++++++ .../CodeTemplates/HostTemplate/HostApplication.h | 56 ++++++ .../LUFA/CodeTemplates/HostTemplate/asf.xml | 41 ++++ .../lufa/LUFA-git/LUFA/CodeTemplates/LUFAConfig.h | 167 +++++++++++++++ .../LUFA/CodeTemplates/WindowsINF/LUFA CDC-ACM.inf | 64 ++++++ .../LUFA/CodeTemplates/WindowsINF/LUFA RNDIS.inf | 59 ++++++ .../LUFA-git/LUFA/CodeTemplates/makefile_template | 38 ++++ 18 files changed, 1638 insertions(+), 1 deletion(-) delete mode 160000 protocol/lufa/LUFA-git create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.c create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Board.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Buttons.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Dataflash.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Joystick.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/LEDs.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.c create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/LUFAConfig.h create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA CDC-ACM.inf create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA RNDIS.inf create mode 100644 protocol/lufa/LUFA-git/LUFA/CodeTemplates/makefile_template (limited to 'protocol/lufa/LUFA-git/LUFA/CodeTemplates') diff --git a/protocol/lufa/LUFA-git b/protocol/lufa/LUFA-git deleted file mode 160000 index b6c18b2a7c..0000000000 --- a/protocol/lufa/LUFA-git +++ /dev/null @@ -1 +0,0 @@ -Subproject commit b6c18b2a7c544653efbe12a1d4e8ba65e7d83c35 diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.c b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.c new file mode 100644 index 0000000000..71cebe8911 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.c @@ -0,0 +1,180 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/** Device descriptor structure. This descriptor describes the overall device + * characteristics, including the supported USB version, control endpoint size + * and the number of device configurations. The descriptor is read out by the + * USB host when the enumeration process begins. + */ +const USB_Descriptor_Device_t DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(2,0,0), + .Class = USB_CSCP_NoDeviceClass, + .SubClass = USB_CSCP_NoDeviceSubclass, + .Protocol = USB_CSCP_NoDeviceProtocol, + + .Endpoint0Size = 64, + + .VendorID = 0x0000, + .ProductID = 0x0000, + .ReleaseNumber = VERSION_BCD(0,0,2), + + .ManufacturerStrIndex = 0x01, + .ProductStrIndex = 0x02, + .SerialNumStrIndex = NO_DESCRIPTOR, + + .NumberOfConfigurations = 1 +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 0, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t LanguageString = +{ + .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, + + .UnicodeString = {LANGUAGE_ID_ENG} +}; + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t ManufacturerString = +{ + .Header = {.Size = USB_STRING_LEN(14), .Type = DTYPE_String}, + + .UnicodeString = L"Your Name Here" +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t ProductString = +{ + .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, + + .UnicodeString = L"LUFA USB Device" +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress + #if defined(HAS_MULTIPLE_DESCRIPTOR_ADDRESS_SPACES) + , uint8_t* const DescriptorMemorySpace + #endif + ) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case 0x00: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case 0x01: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case 0x02: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + #if defined(HAS_MULTIPLE_DESCRIPTOR_ADDRESS_SPACES) + *DescriptorMemorySpace = MEMSPACE_RAM; + #endif + + *DescriptorAddress = Address; + return Size; +} + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.h new file mode 100644 index 0000000000..6d8145d0cc --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/Descriptors.h @@ -0,0 +1,59 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + /* Macros: */ + #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))) + #define HAS_MULTIPLE_DESCRIPTOR_ADDRESS_SPACES + #endif + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + } USB_Descriptor_Configuration_t; + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c new file mode 100644 index 0000000000..ddaa9d0893 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.c @@ -0,0 +1,106 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the USB device application. This file contains the + * main tasks of the application and is responsible for the initial + * application hardware configuration. + */ + +#include "DeviceApplication.h" + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + GlobalInterruptEnable(); + + for (;;) + { + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + #if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + USB_Init(USB_MODE_Device, USB_DEVICE_OPT_FULLSPEED | USB_OPT_AUTO_PLL); + #elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; + + /* Hardware Initialization */ + USB_Init(USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH); + #endif +} + +/** Event handler for the library USB Connection event. */ +void EVENT_USB_Device_Connect(void) +{ + +} + +/** Event handler for the library USB Disconnection event. */ +void EVENT_USB_Device_Disconnect(void) +{ + +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + +} diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.h new file mode 100644 index 0000000000..325176c537 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/DeviceApplication.h @@ -0,0 +1,53 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for DeviceApplication.c. + */ + +#ifndef _USB_DEVICE_APPLICATION_H_ +#define _USB_DEVICE_APPLICATION_H_ + + /* Includes: */ + #include + #include + #include + + #include + #include + + #include "Descriptors.h" + + /* Function Prototypes: */ + void SetupHardware(void); + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml new file mode 100644 index 0000000000..fd65db283f --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml @@ -0,0 +1,55 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Template for a LUFA USB device mode application. + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Board.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Board.h new file mode 100644 index 0000000000..5a1e58364f --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Board.h @@ -0,0 +1,82 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Hardware Information Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Board Hardware + * information driver. + */ + +#ifndef __BOARD_USER_H__ +#define __BOARD_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_BOARD_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Board.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates the board has hardware Buttons mounted if defined. */ +// #define BOARD_HAS_BUTTONS + + /** Indicates the board has a hardware Dataflash mounted if defined. */ +// #define BOARD_HAS_DATAFLASH + + /** Indicates the board has a hardware Joystick mounted if defined. */ +// #define BOARD_HAS_JOYSTICK + + /** Indicates the board has hardware LEDs mounted if defined. */ +// #define BOARD_HAS_LEDS + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Buttons.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Buttons.h new file mode 100644 index 0000000000..b3c2f2b422 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Buttons.h @@ -0,0 +1,90 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Button Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Buttons driver, + * for the control of physical board-mounted GPIO pushbuttons. + */ + +#ifndef __BUTTONS_USER_H__ +#define __BUTTONS_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_BUTTONS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Button mask for the first button on the board. */ + #define BUTTONS_BUTTON1 // TODO: Add mask for first board button here + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void Buttons_Init(void) + { + // TODO: Initialize the appropriate port pins as an inputs here, with pull-ups + } + + static inline void Buttons_Disable(void) + { + // TODO: Clear the appropriate port pins as high impedance inputs here + } + + static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Buttons_GetStatus(void) + { + // TODO: Return current button status here, debounced if required + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Dataflash.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Dataflash.h new file mode 100644 index 0000000000..83acb2f12e --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Dataflash.h @@ -0,0 +1,223 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Dataflash Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Dataflash + * driver. +*/ + +#ifndef __DATAFLASH_USER_H__ +#define __DATAFLASH_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_DATAFLASH_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define DATAFLASH_CHIPCS_MASK // TODO: Replace this with a mask of all the /CS pins of all Dataflashes + #define DATAFLASH_CHIPCS_DDR // TODO: Replace with the DDR register name for the board's Dataflash ICs + #define DATAFLASH_CHIPCS_PORT // TODO: Replace with the PORT register name for the board's Dataflash ICs + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Constant indicating the total number of dataflash ICs mounted on the selected board. */ + #define DATAFLASH_TOTALCHIPS 1 // TODO: Replace with the number of Dataflashes on the board, max 2 + + /** Mask for no dataflash chip selected. */ + #define DATAFLASH_NO_CHIP 0 + + /** Mask for the first dataflash chip selected. */ + #define DATAFLASH_CHIP1 // TODO: Replace with mask with the pin attached to the first Dataflash /CS set + + /** Mask for the second dataflash chip selected. */ + #define DATAFLASH_CHIP2 // TODO: Replace with mask with the pin attached to the second Dataflash /CS set + + /** Internal main memory page size for the board's dataflash ICs. */ + #define DATAFLASH_PAGE_SIZE // TODO: Replace with the page size for the Dataflash ICs + + /** Total number of pages inside each of the board's dataflash ICs. */ + #define DATAFLASH_PAGES // TODO: Replace with the total number of pages inside one of the Dataflash ICs + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. + */ + static inline void Dataflash_Init(void) + { + DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK; + } + + /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. + * + * \param[in] Byte Byte of data to send to the dataflash + * + * \return Last response byte from the dataflash + */ + static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) + { + // TODO + } + + /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash. + * + * \param[in] Byte Byte of data to send to the dataflash + */ + static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline void Dataflash_SendByte(const uint8_t Byte) + { + // TODO + } + + /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash. + * + * \return Last response byte from the dataflash + */ + static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Dataflash_ReceiveByte(void) + { + // TODO + } + + /** Determines the currently selected dataflash chip. + * + * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected + * or a DATAFLASH_CHIPn mask (where n is the chip number). + */ + static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Dataflash_GetSelectedChip(void) + { + return (~DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK); + } + + /** Selects the given dataflash chip. + * + * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of a \c DATAFLASH_CHIPn mask (where n is + * the chip number). + */ + static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; + static inline void Dataflash_SelectChip(const uint8_t ChipMask) + { + DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT | DATAFLASH_CHIPCS_MASK) & ~ChipMask); + } + + /** Deselects the current dataflash chip, so that no dataflash is selected. */ + static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE; + static inline void Dataflash_DeselectChip(void) + { + Dataflash_SelectChip(DATAFLASH_NO_CHIP); + } + + /** Selects a dataflash IC from the given page number, which should range from 0 to + * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one + * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside + * the total number of pages contained in the boards dataflash ICs, all dataflash ICs + * are deselected. + * + * \param[in] PageAddress Address of the page to manipulate, ranging from + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + */ + static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) + { + Dataflash_DeselectChip(); + + if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS)) + return; + + #if (DATAFLASH_TOTALCHIPS == 2) + if (PageAddress & 0x01) + Dataflash_SelectChip(DATAFLASH_CHIP2); + else + Dataflash_SelectChip(DATAFLASH_CHIP1); + #else + Dataflash_SelectChip(DATAFLASH_CHIP1); + #endif + } + + /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive + * a new command. + */ + static inline void Dataflash_ToggleSelectedChipCS(void) + { + uint8_t SelectedChipMask = Dataflash_GetSelectedChip(); + + Dataflash_DeselectChip(); + Dataflash_SelectChip(SelectedChipMask); + } + + /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main + * memory page program or main memory to buffer transfer. + */ + static inline void Dataflash_WaitWhileBusy(void) + { + Dataflash_ToggleSelectedChipCS(); + Dataflash_SendByte(DF_CMD_GETSTATUS); + while (!(Dataflash_ReceiveByte() & DF_STATUS_READY)); + Dataflash_ToggleSelectedChipCS(); + } + + /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with + * dataflash commands which require a complete 24-bit address. + * + * \param[in] PageAddress Page address within the selected dataflash IC + * \param[in] BufferByte Address within the dataflash's buffer + */ + static inline void Dataflash_SendAddressBytes(uint16_t PageAddress, + const uint16_t BufferByte) + { + #if (DATAFLASH_TOTALCHIPS == 2) + PageAddress >>= 1; + #endif + + Dataflash_SendByte(PageAddress >> 5); + Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8)); + Dataflash_SendByte(BufferByte); + } + #endif + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Joystick.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Joystick.h new file mode 100644 index 0000000000..07542ab723 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/Joystick.h @@ -0,0 +1,102 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Joystick Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Joystick + * driver, for a digital four-way (plus button) joystick. +*/ + +#ifndef __JOYSTICK_USER_H__ +#define __JOYSTICK_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_JOYSTICK_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for the joystick being pushed in the left direction. */ + #define JOY_LEFT // TODO: Add mask to indicate joystick left position here + + /** Mask for the joystick being pushed in the right direction. */ + #define JOY_RIGHT // TODO: Add mask to indicate joystick right position here + + /** Mask for the joystick being pushed in the upward direction. */ + #define JOY_UP // TODO: Add mask to indicate joystick up position here + + /** Mask for the joystick being pushed in the downward direction. */ + #define JOY_DOWN // TODO: Add mask to indicate joystick down position here + + /** Mask for the joystick being pushed inward. */ + #define JOY_PRESS // TODO: Add mask to indicate joystick pressed position here + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void Joystick_Init(void) + { + // TODO: Initialize joystick port pins as inputs with pull-ups + } + + static inline void Joystick_Disable(void) + { + // TODO: Clear the joystick pins as high impedance inputs here + } + + static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Joystick_GetStatus(void) + { + // TODO: Return current joystick position data which can be obtained by masking against the JOY_* macros + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/LEDs.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/LEDs.h new file mode 100644 index 0000000000..4373972790 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DriverStubs/LEDs.h @@ -0,0 +1,130 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board LED Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA LEDs driver, + * for the LEDs (up to four) mounted on most development boards. +*/ + +#ifndef __LEDS_USER_H__ +#define __LEDS_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 // TODO: Add mask for first board LED here + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 // TODO: Add mask for second board LED here + + /** LED mask for the third LED on the board. */ + #define LEDS_LED3 // TODO: Add mask for third board LED here + + /** LED mask for the fourth LED on the board. */ + #define LEDS_LED4 // TODO: Add mask for fourth board LED here + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4) + + /** LED mask for none of the board LEDs. */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + // TODO: Add code to initialize LED port pins as outputs here + } + + static inline void LEDs_Disable(void) + { + // TODO: Clear the LED port pins as high impedance inputs here + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + // TODO: Add code to turn on LEDs given in the LEDMask mask here, leave others as-is + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + // TODO: Add code to turn off LEDs given in the LEDMask mask here, leave others as-is + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + // TODO: Add code to turn on only LEDs given in the LEDMask mask here, all others off + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) + { + // TODO: Add code to set the Leds in the given LEDMask to the status given in ActiveMask here + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + // TODO: Add code to toggle the Leds in the given LEDMask, ignoring all others + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + // TODO: Add code to return the current LEDs status' here which can be masked against LED_LED* macros + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.c b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.c new file mode 100644 index 0000000000..1ac03788d3 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.c @@ -0,0 +1,133 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the USB host application. This file contains the + * main tasks of the application and is responsible for the initial + * application hardware configuration. + */ + +#include "HostApplication.h" + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + GlobalInterruptEnable(); + + for (;;) + { + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + USB_Init(USB_MODE_Host, USB_DEVICE_OPT_FULLSPEED | USB_OPT_AUTO_PLL); +} + +/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and + * starts the library USB task to begin the enumeration and USB management process. + */ +void EVENT_USB_Host_DeviceAttached(void) +{ + +} + +/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and + * stops the library USB task management process. + */ +void EVENT_USB_Host_DeviceUnattached(void) +{ + +} + +/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully + * enumerated by the host and is now ready to be used by the application. + */ +void EVENT_USB_Host_DeviceEnumerationComplete(void) +{ + uint16_t ConfigDescriptorSize; + uint8_t ConfigDescriptorData[512]; + + if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, + sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) + { + return; + } + + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) + { + return; + } +} + +/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ +void EVENT_USB_Host_HostError(const uint8_t ErrorCode) +{ + USB_Disable(); + for(;;); +} + +/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while + * enumerating an attached USB device. + */ +void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) +{ + +} + +/* Required callback for retrieving descriptors from a LUFA device - unless the USB_HOST_ONLY configuration + * option is set, this is still required even in an application that uses host mode only. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress +#if defined(HAS_MULTIPLE_DESCRIPTOR_ADDRESS_SPACES) + , uint8_t* const DescriptorMemorySpace +#endif +) +{ + return 0; +} diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.h new file mode 100644 index 0000000000..16dbb535ab --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/HostApplication.h @@ -0,0 +1,56 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for HostApplication.c. + */ + +#ifndef _USB_HOST_APPLICATION_H_ +#define _USB_HOST_APPLICATION_H_ + + /* Includes: */ + #include + #include + #include + + #include + + /* Macros: */ + #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \ + !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))) + #define HAS_MULTIPLE_DESCRIPTOR_ADDRESS_SPACES + #endif + + /* Function Prototypes: */ + void SetupHardware(void); + +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml new file mode 100644 index 0000000000..c1996ec711 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml @@ -0,0 +1,41 @@ + + + + + + + + + + + + + + + + Template for a LUFA USB host mode application. + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/LUFAConfig.h b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/LUFAConfig.h new file mode 100644 index 0000000000..ab7fc7520e --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/LUFAConfig.h @@ -0,0 +1,167 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2014. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File (Template) + * + * This is a header file which can be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. To use this configuration + * header, copy this into your project's root directory and supply + * the \c USE_LUFA_CONFIG_HEADER token to the compiler so that it is + * defined in all compiled source files. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef __LUFA_CONFIG_H__ +#define __LUFA_CONFIG_H__ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG +// #define USE_STATIC_OPTIONS {Insert Value Here} +// #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #elif (ARCH == ARCH_XMEGA) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define USE_STATIC_OPTIONS {Insert Value Here} +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define MAX_ENDPOINT_INDEX {Insert Value Here} +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + #elif (ARCH == ARCH_UC3) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG +// #define USE_STATIC_OPTIONS {Insert Value Here} +// #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif + diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA CDC-ACM.inf b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA CDC-ACM.inf new file mode 100644 index 0000000000..212b5bbcb3 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA CDC-ACM.inf @@ -0,0 +1,64 @@ +; Windows LUFA CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation + +[DefaultInstall] +CopyINF="LUFA CDC-ACM.inf" + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +DriverVer=7/1/2012,10.0.0.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64 + +[SourceDisksNames] + +[SourceDisksFiles] + +[DestinationDirs] +DefaultDestDir=12 + +[DriverInstall] +Include=mdmcpq.inf +CopyFiles=FakeModemCopyFileSection +AddReg=DriverInstall.AddReg + +[DriverInstall.Services] +Include=mdmcpq.inf +AddService=usbser, 0x00000002, LowerFilter_Service_Inst + +[DriverInstall.AddReg] +HKR,,EnumPropPages32,,"msports.dll,SerialPortPropPageProvider" + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044 + +[DeviceList.NTx86] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044 + +[DeviceList.NTia64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2044 + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGNAME="http://www.lufa-lib.org" +DESCRIPTION="LUFA CDC-ACM Virtual Serial Port" diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA RNDIS.inf b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA RNDIS.inf new file mode 100644 index 0000000000..73ca50e687 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/WindowsINF/LUFA RNDIS.inf @@ -0,0 +1,59 @@ +; Windows LUFA RNDIS Setup File +; Copyright (c) 2000 Microsoft Corporation + +[DefaultInstall] +CopyINF="LUFA RNDIS.inf" + +[Version] +Signature="$Windows NT$" +Class=Net +ClassGuid={4d36e972-e325-11ce-bfc1-08002be10318} +Provider=%MFGNAME% +DriverVer=7/1/2012,10.0.0.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTx86, NTamd64, NTia64 + +[ControlFlags] +ExcludeFromSelect=* + +[DriverInstall] +Characteristics=0x84 ; NCF_PHYSICAL + NCF_HAS_UI +BusType=15 +include=netrndis.inf +needs=Usb_Rndis.ndi +AddReg=Rndis_AddReg_Vista + +[DriverInstall.Services] +include=netrndis.inf +needs=Usb_Rndis.ndi.Services + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +[DeviceList.NTx86] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +[DeviceList.NTia64] +%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_204C + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGNAME="http://www.lufa-lib.org" +DESCRIPTION="LUFA RNDIS USB Ethernet Adapter" diff --git a/protocol/lufa/LUFA-git/LUFA/CodeTemplates/makefile_template b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/makefile_template new file mode 100644 index 0000000000..efb6aa76f8 --- /dev/null +++ b/protocol/lufa/LUFA-git/LUFA/CodeTemplates/makefile_template @@ -0,0 +1,38 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2014. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = Target +SRC = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_PLATFORM) +LUFA_PATH = ../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig +LD_FLAGS = + +# Default target +all: + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk +include $(LUFA_PATH)/Build/lufa_sources.mk +include $(LUFA_PATH)/Build/lufa_build.mk +include $(LUFA_PATH)/Build/lufa_cppcheck.mk +include $(LUFA_PATH)/Build/lufa_doxygen.mk +include $(LUFA_PATH)/Build/lufa_dfu.mk +include $(LUFA_PATH)/Build/lufa_hid.mk +include $(LUFA_PATH)/Build/lufa_avrdude.mk +include $(LUFA_PATH)/Build/lufa_atprogram.mk -- cgit v1.2.3