From ee9a7aba396160929604aca54a23ad5534d59940 Mon Sep 17 00:00:00 2001 From: mtdjr Date: Thu, 31 May 2018 11:30:05 -0400 Subject: add not-so-minidox handwire keyboard (#3061) * add not-so-minidox handwire keyboard * corrected keymap * multiple adjustments to not_so_minidox keyboard * remove I2C master left define * update default layer set function * move solenoid code into userspace * minor adjustments to config.h * update keymaps to utilize userspace * move features and config to userspace, correct build issue * correct solenoid pin * adjust defaults for solenoid pin and enable * default solenoid to on for not_so_minidox * disable RGBLIGHT_SLEEP for xd75 * tweaking solenoid enable/disable in userspace and keymaps --- keyboards/handwired/not_so_minidox/config.h | 84 ++++++ keyboards/handwired/not_so_minidox/i2c.c | 162 +++++++++++ keyboards/handwired/not_so_minidox/i2c.h | 49 ++++ .../not_so_minidox/keymaps/default/keymap.c | 121 ++++++++ .../not_so_minidox/keymaps/mtdjr/config.h | 11 + .../not_so_minidox/keymaps/mtdjr/keymap.c | 56 ++++ .../not_so_minidox/keymaps/mtdjr/rules.mk | 1 + keyboards/handwired/not_so_minidox/matrix.c | 307 +++++++++++++++++++++ .../handwired/not_so_minidox/not_so_minidox.c | 1 + .../handwired/not_so_minidox/not_so_minidox.h | 42 +++ keyboards/handwired/not_so_minidox/readme.md | 71 +++++ keyboards/handwired/not_so_minidox/rules.mk | 71 +++++ keyboards/handwired/not_so_minidox/serial.c | 228 +++++++++++++++ keyboards/handwired/not_so_minidox/serial.h | 26 ++ keyboards/handwired/not_so_minidox/split_util.c | 84 ++++++ keyboards/handwired/not_so_minidox/split_util.h | 20 ++ keyboards/iris/keymaps/mtdjr/config.h | 5 +- keyboards/iris/keymaps/mtdjr/keymap.c | 278 ++----------------- keyboards/iris/keymaps/mtdjr/rules.mk | 1 - keyboards/lets_split/keymaps/mtdjr/config.h | 4 +- keyboards/lets_split/keymaps/mtdjr/keymap.c | 263 +++++------------- keyboards/lets_split/keymaps/mtdjr/rules.mk | 1 - keyboards/tada68/keymaps/mtdjr/keymap.c | 57 +--- keyboards/xd75/keymaps/mtdjr/config.h | 3 +- keyboards/xd75/keymaps/mtdjr/keymap.c | 108 +------- 25 files changed, 1457 insertions(+), 597 deletions(-) create mode 100644 keyboards/handwired/not_so_minidox/config.h create mode 100644 keyboards/handwired/not_so_minidox/i2c.c create mode 100644 keyboards/handwired/not_so_minidox/i2c.h create mode 100644 keyboards/handwired/not_so_minidox/keymaps/default/keymap.c create mode 100644 keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h create mode 100644 keyboards/handwired/not_so_minidox/keymaps/mtdjr/keymap.c create mode 100644 keyboards/handwired/not_so_minidox/keymaps/mtdjr/rules.mk create mode 100644 keyboards/handwired/not_so_minidox/matrix.c create mode 100644 keyboards/handwired/not_so_minidox/not_so_minidox.c create mode 100644 keyboards/handwired/not_so_minidox/not_so_minidox.h create mode 100644 keyboards/handwired/not_so_minidox/readme.md create mode 100644 keyboards/handwired/not_so_minidox/rules.mk create mode 100644 keyboards/handwired/not_so_minidox/serial.c create mode 100644 keyboards/handwired/not_so_minidox/serial.h create mode 100644 keyboards/handwired/not_so_minidox/split_util.c create mode 100644 keyboards/handwired/not_so_minidox/split_util.h (limited to 'keyboards') diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h new file mode 100644 index 0000000000..3c0af7bf76 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/config.h @@ -0,0 +1,84 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER mtdjr +#define PRODUCT Not So MiniDox +#define DESCRIPTION A larger version of the MiniDox + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// wiring of each half +#define MATRIX_ROW_PINS { D7, E6, B4, B5 } +#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, D4 } + +#define USE_SERIAL + +//#define EE_HANDS + +#define MASTER_LEFT +//#define MASTER_RIGHT + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + + +#endif diff --git a/keyboards/handwired/not_so_minidox/i2c.c b/keyboards/handwired/not_so_minidox/i2c.c new file mode 100644 index 0000000000..084c890c40 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 400000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c new file mode 100644 index 0000000000..8ea36198a1 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c @@ -0,0 +1,121 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define KC_LOWR LOWER +#define KC_RASE RAISE +#define KC_RST RESET +#define KC_CAD LCTL(LALT(KC_DEL)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( +// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC, +// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, +// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_ENT, +// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------' + KC_LGUI,KC_LOWR, KC_SPC, KC_SPC,KC_RASE,KC_RALT + // `-------+-------+-------` `-------+-------+-------` + ), + + [_LOWER] = LAYOUT( +// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, +// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,KC_LCBR,KC_RCBR,KC_BSLS, +// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, +// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------' + _______,_______,_______, _______,_______,_______ + // `-------+-------+-------` `-------+-------+-------` + ), + + [_RAISE] = LAYOUT( + // ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + KC_GRV,KC_EXLM, KC_AT,KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN, KC_DEL, + // |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,KC_MINS, KC_EQL, _______, KC_UP,_______,KC_LBRC,KC_RBRC,KC_PIPE, + // |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______, + // '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------' + _______,_______,_______, _______,_______,_______ + // `-------+-------+-------` `-------+-------+-------` + ), + [_ADJUST] = LAYOUT( +// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + _______,_______,_______,_______, KC_RST,_______, _______,_______,_______,_______,_______, KC_CAD, +// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, +// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------| + _______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, +// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------' + _______,_______,_______, _______,_______,_______ + // `-------+-------+-------` `-------+-------+-------` + ) +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_ADJUST); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h new file mode 100644 index 0000000000..fa6151e108 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h @@ -0,0 +1,11 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include QMK_KEYBOARD_CONFIG_H + +#define SOLENOID_ENABLE +#define SOLENOID_PIN F6 +#undef SOLENOID_ACTIVE +#define SOLENOID_ACTIVE true + +#endif diff --git a/keyboards/handwired/not_so_minidox/keymaps/mtdjr/keymap.c b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/keymap.c new file mode 100644 index 0000000000..01c64d8701 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/keymap.c @@ -0,0 +1,56 @@ +#include QMK_KEYBOARD_H +#include "mtdjr.h" + +extern keymap_config_t keymap_config; + +#define KC_LOCK TD(TD_ALTLOCK) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_kc( + // ,----+-----+-----+-----+-----+-----, ,----+-----+-----+-----+-----+-----, + TAB, Q, W, E, R, T, Y, U, I, O, P, BSPC, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT, + // |----+-----+-----+-----+-----+-----|-, ,-|----+-----+-----+-----+-----+-----| + LGUI, LOWR, SPC, SPC, RASE, LOCK + // `----+-----+-----` `----+-----+-----` + ), + + [_LOWER] = LAYOUT_kc( + // ,----+-----+-----+-----+-----+-----, ,----+-----+-----+-----+-----+-----, + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, DEL, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + , , , , , , , , , LCBR, RCBR, BSLS, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + , , , XCPY, XINS, , , , , , , , + // |----+-----+-----+-----+-----+-----|-, ,-|----+-----+-----+-----+-----+-----| + , , , , , + // `----+-----+-----` `----+-----+-----` + ), + + [_RAISE] = LAYOUT_kc( + // ,----+-----+-----+-----+-----+-----, ,----+-----+-----+-----+-----+-----, + GRV, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, DEL, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + , , , , MINS, EQL, , , UP, LBRC, RBRC, PIPE, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + , , , , , , , LEFT, DOWN, RGHT, , , + // |----+-----+-----+-----+-----+-----|-, ,-|----+-----+-----+-----+-----+-----| + , , , , , + // `----+-----+-----` `----+-----+-----` + ), + [_ADJUST] = LAYOUT_kc( + // ,----+-----+-----+-----+-----+-----, ,----+-----+-----+-----+-----+-----, + STOG, xxxx, xxxx, xxxx, RST, xxxx, ROOT, PPLY, PSEF, xxxx, xxxx, CAD, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + SDM, SDP, SBOF, SBON, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, + // |----+-----+-----+-----+-----+-----| |----+-----+-----+-----+-----+-----| + xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, xxxx, + // |----+-----+-----+-----+-----+-----|-, ,-|----+-----+-----+-----+-----+-----| + xxxx, , xxxx, xxxx, , xxxx + // `----+-----+-----` `----+-----+-----` + ) +}; diff --git a/keyboards/handwired/not_so_minidox/keymaps/mtdjr/rules.mk b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/rules.mk new file mode 100644 index 0000000000..e5ddcae8d9 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/keymaps/mtdjr/rules.mk @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = yes diff --git a/keyboards/handwired/not_so_minidox/matrix.c b/keyboards/handwired/not_so_minidox/matrix.c new file mode 100644 index 0000000000..27a38dca02 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/matrix.c @@ -0,0 +1,307 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/handwired/not_so_minidox/not_so_minidox.c b/keyboards/handwired/not_so_minidox/not_so_minidox.c new file mode 100644 index 0000000000..898c9eaca8 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/not_so_minidox.c @@ -0,0 +1 @@ +#include "not_so_minidox.h" \ No newline at end of file diff --git a/keyboards/handwired/not_so_minidox/not_so_minidox.h b/keyboards/handwired/not_so_minidox/not_so_minidox.h new file mode 100644 index 0000000000..05e7bc4914 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/not_so_minidox.h @@ -0,0 +1,42 @@ +#ifndef NOSOTMINIDOX_H +#define NOSOTMINIDOX_H + + +#include "quantum.h" + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R05, R04, R03, R02, R01, R00, \ + L10, L11, L12, L13, L14, L15, R15, R14, R13, R12, R11, R10, \ + L20, L21, L22, L23, L24, L25, R25, R24, R23, R22, R21, R20, \ + LT1, LT2, LT3, RT3, RT2, RT1 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { KC_NO, KC_NO, KC_NO, LT1, LT2, LT3 }, \ + { R00, R01, R02, R03, R04, R05 }, \ + { R10, R11, R12, R13, R14, R15 }, \ + { R20, R21, R22, R23, R24, R25 }, \ + { KC_NO, KC_NO, KC_NO, RT1, RT2, RT3 }, \ + } + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_kc( \ + L00, L01, L02, L03, L04, L05, R05, R04, R03, R02, R01, R00, \ + L10, L11, L12, L13, L14, L15, R15, R14, R13, R12, R11, R10, \ + L20, L21, L22, L23, L24, L25, R25, R24, R23, R22, R21, R20, \ + LT1, LT2, LT3, RT3, RT2, RT1 \ + ) \ + { \ + { KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05 }, \ + { KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15 }, \ + { KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25 }, \ + { KC_NO, KC_NO, KC_NO, KC_##LT1, KC_##LT2, KC_##LT3 }, \ + { KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05 }, \ + { KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15 }, \ + { KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25 }, \ + { KC_NO, KC_NO, KC_NO, KC_##RT1, KC_##RT2, KC_##RT3 }, \ + } + +#endif diff --git a/keyboards/handwired/not_so_minidox/readme.md b/keyboards/handwired/not_so_minidox/readme.md new file mode 100644 index 0000000000..fbfa7b7be0 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/readme.md @@ -0,0 +1,71 @@ +not_so_minidox +===== + +![not_so_minidox]() + +A slightly larger version of the MiniDox + +Keyboard Maintainer: mtdjr +Hardware Supported: None yet/ProMicro + +Make example for this keyboard (after setting up your build environment): + + make not_so_minidox/rev1:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +Flashing +------- +Note: Most of this is copied from the Let's Split readme, because it is awesome + +From the root directory run `make PROJECT:KEYMAP:avrdude` for automatic serial port resolution and flashing. +Example: `make not_so_minidox/rev1:default:avrdude` + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk new file mode 100644 index 0000000000..fe4cc014e7 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -0,0 +1,71 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +USE_I2C ?= no +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes diff --git a/keyboards/handwired/not_so_minidox/serial.c b/keyboards/handwired/not_so_minidox/serial.c new file mode 100644 index 0000000000..74bcbb6bf6 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/serial.c @@ -0,0 +1,228 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include "serial.h" + +#ifndef USE_I2C + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/handwired/not_so_minidox/serial.h b/keyboards/handwired/not_so_minidox/serial.h new file mode 100644 index 0000000000..15fe4db7b4 --- /dev/null +++ b/keyboards/handwired/not_so_minidox/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/handwired/not_so_minidox/split_util.c b/keyboards/handwired/not_so_minidox/split_util.c new file mode 100644 index 0000000000..39639c3b4b --- /dev/null +++ b/keyboards/handwired/not_so_minidox/split_util.c @@ -0,0 +1,84 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#ifdef SSD1306OLED + matrix_master_OLED_init (); +#endif +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< +#include "eeconfig.h" + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/iris/keymaps/mtdjr/config.h b/keyboards/iris/keymaps/mtdjr/config.h index 0e8938775f..28109d3ab4 100644 --- a/keyboards/iris/keymaps/mtdjr/config.h +++ b/keyboards/iris/keymaps/mtdjr/config.h @@ -20,6 +20,9 @@ along with this program. If not, see . #include "config_common.h" +#define SOLENOID_ENABLE +#define SOLENOID_PIN C6 + /* Use I2C or Serial, not both */ #define USE_SERIAL @@ -28,7 +31,7 @@ along with this program. If not, see . /* Select hand configuration */ #define MASTER_LEFT -#define TAPPING_TERM 250 + // #define MASTER_RIGHT // #define EE_HANDS diff --git a/keyboards/iris/keymaps/mtdjr/keymap.c b/keyboards/iris/keymaps/mtdjr/keymap.c index ba95d16b23..d6e3ec05e8 100644 --- a/keyboards/iris/keymaps/mtdjr/keymap.c +++ b/keyboards/iris/keymaps/mtdjr/keymap.c @@ -1,145 +1,8 @@ -#include "iris.h" -#include "action_layer.h" -#include "eeconfig.h" -#include "action_macro.h" -#include -#include "pincontrol.h" +#include QMK_KEYBOARD_H +#include "mtdjr.h" extern keymap_config_t keymap_config; -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _SUPER 3 -#define _ADJUST 16 -#define SOLENOID_DEFAULT_DWELL 12 -#define SOLENOID_MAX_DWELL 100 -#define SOLENOID_MIN_DWELL 4 -#define SOLENOID_PIN C6 - - -bool solenoid_enabled = false; -bool solenoid_on = false; -bool solenoid_buzz = false; -bool solenoid_buzzing = false; -uint16_t solenoid_start = 0; -uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL; - - -void solenoid_buzz_on(void) { - solenoid_buzz = true; -} - -void solenoid_buzz_off(void) { - solenoid_buzz = false; -} - -void solenoid_dwell_minus(void) { - if (solenoid_dwell > 0) solenoid_dwell--; -} - -void solenoid_dwell_plus(void) { - if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++; -} - -void solenoid_toggle(void) { - solenoid_enabled = !solenoid_enabled; -} - -void solenoid_stop(void) { - digitalWrite(SOLENOID_PIN, PinLevelLow); - solenoid_on = false; - solenoid_buzzing = false; -} - -void solenoid_fire(void) { - if (!solenoid_enabled) return; - - if (!solenoid_buzz && solenoid_on) return; - if (solenoid_buzz && solenoid_buzzing) return; - - solenoid_on = true; - solenoid_buzzing = true; - solenoid_start = timer_read(); - digitalWrite(SOLENOID_PIN, PinLevelHigh); -} - -void solenoid_check(void) { - uint16_t elapsed = 0; - - if (!solenoid_on) return; - - elapsed = timer_elapsed(solenoid_start); - - //Check if it's time to finish this solenoid click cycle - if (elapsed > solenoid_dwell) { - solenoid_stop(); - return; - } - - //Check whether to buzz the solenoid on and off - if (solenoid_buzz) { - if (elapsed / SOLENOID_MIN_DWELL % 2 == 0){ - if (!solenoid_buzzing) { - solenoid_buzzing = true; - digitalWrite(SOLENOID_PIN, PinLevelHigh); - } - } - else { - if (solenoid_buzzing) { - solenoid_buzzing = false; - digitalWrite(SOLENOID_PIN, PinLevelLow); - } - } - } -} - -void solenoid_setup(void) { - pinMode(SOLENOID_PIN, PinDirectionOutput); -} - -void matrix_init_user(void) { - solenoid_setup(); -} - -void matrix_scan_user(void) { - solenoid_check(); -} - - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - SUPER, - ADJUST, - SOL_TOG, - SOLENOID_DWELL_MINUS, - SOLENOID_DWELL_PLUS, - SOLENOID_BUZZ_ON, - SOLENOID_BUZZ_OFF, - TD_ESC = 0, -}; - -#define KC_ KC_TRNS -#define _______ KC_TRNS - -#define KC_LOWR LOWER -#define KC_RASE RAISE -#define KC_SUPR SUPER -#define KC_RST RESET -#define KC_BL_S BL_STEP -#define KC_EXC TD(TD_ESC) -#define SOLTOG SOLENOID_TOG - -// Macro Declarations -#define UM_ROOT M(0) -#define UM_PPLY M(1) -#define UM_PSEF M(2) -#define KC_XCPY M(3) -#define KC_XINS M(4) -#define UM_CAD M(5) - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT_kc( @@ -152,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----| EQL, Z , X , C , V , B ,LGUI, LALT, N , M ,COMM,DOT ,SLSH,MINS, //`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----' - LCTL,RASE,SPC , SPC ,LOWR,SUPR + LCTL,RASE,SPC , SPC ,LOWR,xxxx // `----+----+----' `----+----+----' ), @@ -178,130 +41,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //|----+----+----+----+----+----| |----+----+----+----+----+----| , F9 ,F10 ,F11 ,F12 , , , , , , , , //|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----| - , , ,XCPY,XINS, , , , , , , , ,PLUS, + , , ,XCPY,XINS, , , , , , , , , , //`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----' , , , , , // `----+----+----' `----+----+----' ), - [_SUPER] = LAYOUT( - //,--------+--------+--------+--------+--------+--------. ,--------+--------+--------+--------+--------+--------. - SOL_TOG, UM_ROOT, UM_PPLY, UM_PSEF, _______, _______, _______, _______, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, KC_LBRC, _______, _______, _______, _______, - //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, UM_CAD , - //|--------+--------+--------+--------+--------+--------+--------. ,--------|--------+--------+--------+--------+--------+--------| - _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, - //`--------+--------+--------+----+---+--------+--------+--------/ \--------+--------+--------+---+----+--------+--------+--------' - _______, _______, _______, _______, _______, _______ - // `--------+--------+--------' `--------+--------+--------' -) - -}; - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for grave accent, twice for ESC - [TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_GRV, KC_ESC) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - if (record->event.pressed) { - solenoid_fire(); - } - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case SUPER: - if (record->event.pressed) { - layer_on(_SUPER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_SUPER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case SOLTOG: - if (record->event.pressed) { - solenoid_toggle(); - } - break; - case SOLENOID_DWELL_MINUS: - if (record->event.pressed) { - solenoid_dwell_minus(); - } - break; - case SOLENOID_DWELL_PLUS: - if (record->event.pressed) { - solenoid_dwell_plus(); - } - break; - case SOLENOID_BUZZ_ON: - if (record->event.pressed) { - solenoid_buzz_on(); - } - break; - case SOLENOID_BUZZ_OFF: - if (record->event.pressed) { - solenoid_buzz_off(); - } - break; - } - return true; -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - SEND_STRING("sudo su -\n"); - return false; break; - case 1: - SEND_STRING("puppet apply /etc/puppetlabs/code/environments/production/manifests/site.pp\n"); - return false; break; - case 2: - SEND_STRING("ps -ef | grep "); - return false; break; - case 3: - return MACRO(D(LCTL), T(INS), U(LCTL), END); - break; - case 4: - return MACRO(D(LSFT), T(INS), U(LSFT), END); - break; - case 5: - return MACRO(D(LCTL), D(RALT), T(DEL), END); - break; - } - } - return MACRO_NONE; + [_ADJUST] = LAYOUT_kc( + //,----+----+----+----+----+----. ,----+----+----+----+----+----. + STOG,ROOT,PPLY,PSEF,xxxx,xxxx, xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, xxxx,xxxx,xxxx,xxxx,xxxx,BSLS, + //|----+----+----+----+----+----| |----+----+----+----+----+----| + xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, + //|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----| + xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, + //`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----' + xxxx, ,xxxx, xxxx, , + // `----+----+----' `----+----+----' + ) }; diff --git a/keyboards/iris/keymaps/mtdjr/rules.mk b/keyboards/iris/keymaps/mtdjr/rules.mk index 7c19013e5b..c5e16f1369 100644 --- a/keyboards/iris/keymaps/mtdjr/rules.mk +++ b/keyboards/iris/keymaps/mtdjr/rules.mk @@ -1,6 +1,5 @@ RGBLIGHT_ENABLE = no BACKLIGHT_ENABLE = no -TAP_DANCE_ENABLE = no ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/lets_split/keymaps/mtdjr/config.h b/keyboards/lets_split/keymaps/mtdjr/config.h index 761e9e175d..2b5a193654 100644 --- a/keyboards/lets_split/keymaps/mtdjr/config.h +++ b/keyboards/lets_split/keymaps/mtdjr/config.h @@ -23,11 +23,13 @@ along with this program. If not, see . #include "../../config.h" +#define SOLENOID_ENABLE +#define SOLENOID_PIN F4 + /* Use I2C or Serial, not both */ // #define USE_SERIAL #define USE_I2C - #define TAPPING_TERM 250 /* Select hand configuration */ // #define MASTER_LEFT diff --git a/keyboards/lets_split/keymaps/mtdjr/keymap.c b/keyboards/lets_split/keymaps/mtdjr/keymap.c index 4846772edf..72476c7001 100644 --- a/keyboards/lets_split/keymaps/mtdjr/keymap.c +++ b/keyboards/lets_split/keymaps/mtdjr/keymap.c @@ -1,194 +1,81 @@ -#include "lets_split.h" -#include "action_layer.h" -#include "eeconfig.h" -#include "action_macro.h" +#include QMK_KEYBOARD_H +#include "mtdjr.h" extern keymap_config_t keymap_config; -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 -#define _ADJUST 16 - -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, - TD_ESC = 0 -}; - -// Fillers to make layering more clear -#define _______ KC_TRNS -#define XXXXXXX KC_NO - - -// Macro Declarations -#define UM_ROOT M(0) -#define UM_PPLY M(1) -#define UM_COPY M(2) -#define UM_INSR M(3) -#define UM_PSEF M(4) - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,-----------------------------------------. ,-----------------------------------------. - * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |Esc/~ | A | S | D | F | G | | H | J | K | L | ; | '/" | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Up | Down |Right | - * `-----------------------------------------' '-----------------------------------------' - */ -[_QWERTY] = LAYOUT( \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - TD(TD_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT \ -), - - /* Lower - * ,-----------------------------------------. ,-----------------------------------------. - * | ~ | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | | [ | ] | { | } | | | 4 | 5 | 6 | * | \ | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |Shift | | | copy |insert| | | | 1 | 2 | 3 | + | - | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space | |Space |Raise | 0 | . | = | _ | - * `-----------------------------------------' '-----------------------------------------' - */ -[_LOWER] = LAYOUT( \ - KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ - XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, XXXXXXX, KC_4, KC_5, KC_6, KC_ASTR, KC_BSLS, \ - _______, XXXXXXX, XXXXXXX, UM_COPY, UM_INSR, XXXXXXX, XXXXXXX, KC_1, KC_2, KC_3, KC_PLUS, KC_MINS, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_EQL, KC_UNDS \ -), - - -/* Raise - * ,-----------------------------------------. ,-----------------------------------------. - * | ` | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | | | | | | | | | | | \ | | | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |Shift | | | | | | | | | | | | | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Next | Vol- | Vol+ | Play | - * `-----------------------------------------' '-----------------------------------------' - */ -[_RAISE] = LAYOUT( \ - KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_PIPE,\ - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ -), - - /* Adjust (Lower + Raise) - * ,-----------------------------------------. ,-----------------------------------------. - * | | Reset| | | | | | ROOT | PPLY | PSEF | | | Del | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | | |Aud on|Audoff| | | F1 | F2 | F3 | F4 | F5 | F6 | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | UNDO | CUT | COPY |PASTE | | | F7 | F8 | F9 | F10 | F11 | F12 | - * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | | | | | | | | | | Home | | | End | - * `-----------------------------------------' '-----------------------------------------' - */ -[_ADJUST] = LAYOUT( \ - _______, UM_ROOT, UM_PPLY, UM_PSEF, _______, _______, RESET, _______, _______, _______, _______, KC_DEL, \ - _______, _______, _______, AU_ON, AU_OFF, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, \ - _______, KC_UNDO, KC_CUT, UM_COPY, UM_INSR, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, _______, _______, KC_END \ -) - - -}; - -#ifdef AUDIO_ENABLE -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -#endif - -void persistent_default_layer_set(uint16_t default_layer) { - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for nothing, twice for ESC - [TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_NO, KC_ESC) -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif - persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - } - return true; -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - SEND_STRING("sudo su -\n"); - return false; break; - case 1: - SEND_STRING("puppet apply /etc/puppetlabs/code/environments/production/manifests/site.pp\n"); - return false; break; - case 2: - return MACRO(D(LCTL), T(INS), U(LCTL), END); - break; - case 3: - return MACRO(D(LSFT), T(INS), U(LSFT), END); - break; - case 4: - SEND_STRING("ps -ef | grep "); - return false; break; - } - } - return MACRO_NONE; -}; + /* Qwerty + * ,-----------------------------------------. ,-----------------------------------------. + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Esc/~ | A | S | D | F | G | | H | J | K | L | ; | '/" | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Left | Up | Down |Right | + * `-----------------------------------------' '-----------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_EXC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT \ + ), + + /* Lower + * ,-----------------------------------------. ,-----------------------------------------. + * | ~ | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | [ | ] | { | } | | | 4 | 5 | 6 | * | \ | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Shift | | | copy |insert| | | | 1 | 2 | 3 | + | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | |Space |Raise | 0 | . | = | _ | + * `-----------------------------------------' '-----------------------------------------' + */ + [_LOWER] = LAYOUT( \ + KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ + XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, XXXXXXX, KC_4, KC_5, KC_6, KC_ASTR, KC_BSLS, \ + _______, XXXXXXX, XXXXXXX, KC_XCPY, KC_XINS, XXXXXXX, XXXXXXX, KC_1, KC_2, KC_3, KC_PLUS, KC_MINS, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_DOT, KC_EQL, KC_UNDS \ + ), + + + /* Raise + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | \ | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Shift | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space | |Space |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' '-----------------------------------------' + */ + [_RAISE] = LAYOUT( \ + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_PIPE,\ + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ + ), + + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,-----------------------------------------. + * | | Reset| | | | | | ROOT | PPLY | PSEF | | | Del | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |Aud on|Audoff| | | F1 | F2 | F3 | F4 | F5 | F6 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | UNDO | CUT | COPY |PASTE | | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | Home | | | End | + * `-----------------------------------------' '-----------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + KC_STOG, KC_ROOT, KC_PPLY, KC_PSEF, _______, _______, RESET, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, \ + _______, KC_UNDO, KC_CUT, KC_XCPY, KC_XINS, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, _______, _______, KC_END \ + ) +}; \ No newline at end of file diff --git a/keyboards/lets_split/keymaps/mtdjr/rules.mk b/keyboards/lets_split/keymaps/mtdjr/rules.mk index f0ed9e8dcc..457a3d01d4 100644 --- a/keyboards/lets_split/keymaps/mtdjr/rules.mk +++ b/keyboards/lets_split/keymaps/mtdjr/rules.mk @@ -1,4 +1,3 @@ -TAP_DANCE_ENABLE = yes ifndef QUANTUM_DIR include ../../../../Makefile endif diff --git a/keyboards/tada68/keymaps/mtdjr/keymap.c b/keyboards/tada68/keymaps/mtdjr/keymap.c index 1b1f6ad4f1..d24bbf956f 100644 --- a/keyboards/tada68/keymaps/mtdjr/keymap.c +++ b/keyboards/tada68/keymaps/mtdjr/keymap.c @@ -1,22 +1,5 @@ -#include "tada68.h" -#include "action_macro.h" - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _FL 1 - -// Macro Declarations -#define UM_ROOT M(0) -#define UM_PPLY M(1) -#define UM_PSEF M(2) -#define UM_XCPY M(3) -#define UM_XINS M(4) -#define UM_CAD M(5) - -#define _______ KC_TRNS +#include QMK_KEYBOARD_H +#include "mtdjr.h" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: (Base Layer) Default Layer @@ -32,12 +15,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Ctrl|Alt |Gui | Space |Alt| FN|Ctrl|Lef|Dow|Rig | * `----------------------------------------------------------------' */ -[_BL] = KEYMAP_ANSI( +[_QWERTY] = KEYMAP_ANSI( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS, KC_DEL, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,KC_UP, KC_PGDN, \ - KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RALT,MO(_FL), KC_RCTRL, KC_LEFT,KC_DOWN, KC_RGHT), + KC_LCTL,KC_LALT,KC_LGUI, KC_SPC, KC_RALT,KC_LOWR, KC_RCTRL, KC_LEFT,KC_DOWN, KC_RGHT), /* Keymap _FL: Function Layer * ,----------------------------------------------------------------. @@ -52,36 +35,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | |MsL|MsD|MsR | * `----------------------------------------------------------------' */ -[_FL] = KEYMAP_ANSI( +[_LOWER] = KEYMAP_ANSI( _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10, KC_F11, KC_F12, KC_DEL, KC_GRV, \ - _______,UM_ROOT,UM_PPLY,UM_PSEF,_______,_______,_______,_______,_______,_______,KC_PSCR,_______,_______,_______, KC_HOME, \ + _______,KC_ROOT,KC_PPLY,KC_PSEF,_______,_______,_______,_______,_______,_______,KC_PSCR,_______,_______,_______, KC_HOME, \ _______,BL_DEC ,BL_TOGG,BL_INC,BL_BRTG,_______,_______,_______,_______,_______,_______,_______, _______, KC_END, \ - _______,_______ ,_______,UM_XCPY,UM_XINS,_______,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,KC_BTN1,KC_MS_U,KC_BTN2, \ + _______,_______ ,_______,KC_XCPY,KC_XINS,_______,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,KC_BTN1,KC_MS_U,KC_BTN2, \ _______,_______,_______, _______, _______,_______,_______,KC_MS_L,KC_MS_D,KC_MS_R), }; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch(id) { - case 0: - SEND_STRING("sudo su -\n"); - return false; break; - case 1: - SEND_STRING("puppet apply /etc/puppetlabs/code/environments/production/manifests/site.pp\n"); - return false; break; - case 2: - SEND_STRING("ps -ef | grep "); - return false; break; - case 3: - return MACRO(D(LCTL), T(INS), U(LCTL), END); - break; - case 4: - return MACRO(D(LSFT), T(INS), U(LSFT), END); - break; - case 5: - return MACRO(D(LCTL), D(RALT), T(DEL), END); - break; - } - } - return MACRO_NONE; -}; diff --git a/keyboards/xd75/keymaps/mtdjr/config.h b/keyboards/xd75/keymaps/mtdjr/config.h index aadcaa3875..7e2227c874 100644 --- a/keyboards/xd75/keymaps/mtdjr/config.h +++ b/keyboards/xd75/keymaps/mtdjr/config.h @@ -20,7 +20,8 @@ #include "../../config.h" // place overrides here -#define RGBLIGHT_SLEEP +#undef MANUFACTURER +#undef DESCRIPTION #define MANUFACTURER mtdjr #define PRODUCT XD75 #define DESCRIPTION XD75Re diff --git a/keyboards/xd75/keymaps/mtdjr/keymap.c b/keyboards/xd75/keymaps/mtdjr/keymap.c index 696c82ae4f..28d4b49618 100644 --- a/keyboards/xd75/keymaps/mtdjr/keymap.c +++ b/keyboards/xd75/keymaps/mtdjr/keymap.c @@ -1,68 +1,13 @@ -/* Copyright 2017 Wunder - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "xd75.h" -#include "action_layer.h" +#include QMK_KEYBOARD_H +#include "mtdjr.h" - -enum custom_keycodes { - // TD_ESC = 0, - TD_LOCK = 0, -}; - -// Layers -#define _QWERTY 0 -#define _LOWER 1 -#define _RAISE 2 - - - -// Shortcuts -#define KC_____ KC_NO -#define KC_ KC_TRNS -#define KC_RST RESET -#define KC_RASE MO(_RAISE) -#define KC_LOWR MO(_LOWER) - -// RGB and Backlighting -#define KC_RGB RGB_TOG -#define KC_RHUI RGB_HUI -#define KC_RHUD RGB_HUD -#define KC_RSAI RGB_SAI -#define KC_RSAD RGB_SAD -#define KC_RVAI RGB_VAI -#define KC_RVAD RGB_VAD -#define KC_BLT BL_TOGG -#define KC_BLS BL_STEP -#define KC_BLI BL_INC -#define KC_BLD BL_DEC - -// Tapdance -//#define KC_EXC TD(TD_ESC) -#define KC_LOCK TD(TD_LOCK) - -// Macros -#define KC_ROOT M(0) -#define KC_PPLY M(1) -#define KC_PSEF M(2) +#define KC_LOCK TD(TD_ENDLOCK) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = KC_KEYMAP( // .--------------------------------------------------------------------------. - ESC, 1 , 2 , 3 , 4 , 5 ,PGUP,PSCR,PGDN, 6 , 7 , 8 , 9 , 0 ,BSPC, + EXC, 1 , 2 , 3 , 4 , 5 ,PGUP,xxxx,PGDN, 6 , 7 , 8 , 9 , 0 ,BSPC, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| TAB, Q , W , E , R , T , INS,BSLS, DEL, Y , U , I , O , P ,QUOT, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| @@ -70,44 +15,39 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| LSFT, Z , X , C , V , B ,LBRC,MINS,RBRC, N , M ,COMM, DOT,SLSH,RSFT, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - LOWR,LCTL,LALT,LGUI,____, SPC,RASE, GRV,LOWR, SPC,____,LEFT,DOWN,UP ,RGHT + LOWR,LCTL,LALT,LGUI,xxxx, SPC, SPC,RASE,SPC, SPC,xxxx,LEFT,DOWN,UP ,RGHT // '----+----+----+----+----+----+----+----+----+----+----+----+----+----+----' ), [_LOWER] = KC_KEYMAP( // .--------------------------------------------------------------------------. - ____, F1, F2, F3, F4, F5, F6,____, F7, F8, F9, F10, F11, F12,____, + xxxx, F1, F2, F3, F4, F5, F6,xxxx, F7, F8, F9, F10, F11, F12, DEL, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - ____,ROOT,PPLY,PSEF,____,____,____,____,____,____,____,____,____,____,____, + xxxx,ROOT,PPLY,PSEF,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - ____,____,____,____,____,____,____,____,____,____,____,____,____,____,____, + xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - ____,____,____,____,____,____,____,____,____,____,____,____,____,____,MUTE, + xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,MUTE, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - ,____,____,____,____,____, ,____, ,MPLY,____,MPRV,VOLD,VOLU,MNXT + ,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, ,xxxx,MPLY,xxxx,MPRV,VOLD,VOLU,MNXT // '----+----+----+----+----+----+----+----+----+----+----+----+----+----+----' ), [_RAISE] = KC_KEYMAP( // .--------------------------------------------------------------------------. - ____,____,____,____,____,____,____,____,____,____,____,____,____,____,____, + xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - ____,____,____,____, RST,____,____,____,____,____,____,____,____,____,____, + xxxx,xxxx,xxxx,xxxx, RST,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - CAPS,____,____,____,____,____,____, BLI,____,____,____,____,____,____,____, + CAPS,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, BLI,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - RGB,RHUI,RHUD,RSAI,RSAD,RVAI,RVAD, BLD,____,____,____,____,BTN1,BTN2,____, + RGB,RHUI,RHUD,RSAI,RSAD,RVAI,RVAD, BLD,xxxx,xxxx,xxxx,xxxx,BTN1,BTN2,xxxx, // |----+----+----+----+----+----+----+----+----+----+----+----+----+----+----| - ,____,____,____,____,____, ,____, ,____,____,MS_L,MS_D,MS_U,MS_R + ,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx, ,xxxx,xxxx,xxxx,MS_L,MS_D,MS_U,MS_R // '----+----+----+----+----+----+----+----+----+----+----+----+----+----+----' ) }; -qk_tap_dance_action_t tap_dance_actions[] = { - //Tap once for left ctrl, twice for ESC - //[TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_ESC), - [TD_LOCK] = ACTION_TAP_DANCE_DOUBLE(KC_END, LGUI(KC_L)) -}; void led_set_user(uint8_t usb_led) { if (usb_led & (1<event.pressed) { - switch(id) { - case 0: - SEND_STRING("sudo su -\n"); - return false; break; - case 1: - SEND_STRING("puppet apply /etc/puppetlabs/code/environments/production/manifests/site.pp\n"); - return false; break; - case 2: - SEND_STRING("ps -ef | grep "); - return false; break; - } - } - return MACRO_NONE; -}; -- cgit v1.2.3