From 3a2ae6a213acf7b20fab711a311ed5ca44b79b19 Mon Sep 17 00:00:00 2001 From: rai-suta Date: Mon, 26 Jun 2017 00:37:46 +0900 Subject: Add a keymap for testing JIS_KEYCODE. --- keyboards/planck/keymaps/rai-suta/Makefile | 28 ++++++++ keyboards/planck/keymaps/rai-suta/config.h | 8 +++ keyboards/planck/keymaps/rai-suta/keymap.c | 107 ++++++++++++++++++++++++++++ keyboards/planck/keymaps/rai-suta/readme.md | 3 + 4 files changed, 146 insertions(+) create mode 100644 keyboards/planck/keymaps/rai-suta/Makefile create mode 100644 keyboards/planck/keymaps/rai-suta/config.h create mode 100644 keyboards/planck/keymaps/rai-suta/keymap.c create mode 100644 keyboards/planck/keymaps/rai-suta/readme.md (limited to 'keyboards') diff --git a/keyboards/planck/keymaps/rai-suta/Makefile b/keyboards/planck/keymaps/rai-suta/Makefile new file mode 100644 index 0000000000..4263440ec1 --- /dev/null +++ b/keyboards/planck/keymaps/rai-suta/Makefile @@ -0,0 +1,28 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +# Option defines +OPT_DEFS += -DJIS_KEYCODE + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/rai-suta/config.h b/keyboards/planck/keymaps/rai-suta/config.h new file mode 100644 index 0000000000..b36aa3db92 --- /dev/null +++ b/keyboards/planck/keymaps/rai-suta/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define TAPPING_TERM ( 200 ) + +#endif diff --git a/keyboards/planck/keymaps/rai-suta/keymap.c b/keyboards/planck/keymaps/rai-suta/keymap.c new file mode 100644 index 0000000000..13fc3677e6 --- /dev/null +++ b/keyboards/planck/keymaps/rai-suta/keymap.c @@ -0,0 +1,107 @@ +// This keymap assumes that the keyboard is recognized as JIS keyboard from the OS. + +#include "planck.h" +#include "version.h" + +// Keycode defines +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define C(kc) LCTL(kc) +// JIS keyboard +#define JK_CIRC KC_EQL // ^ +#define JK_AT KC_LBRC // @ +#define JK_LBRC KC_RBRC // [ +#define JK_CLN KC_QUOT // : +#define JK_RBRC KC_BSLS // ] +#define JK_BSLS KC_RO // Backslash(\) +#define JK_DQT S(KC_2) // " +#define JK_AMPR S(KC_6) // & +#define JK_SQT S(KC_7) // ' +#define JK_LPRN S(KC_8) // ( +#define JK_RPRN S(KC_9) // ) +#define JK_S0 S(KC_0) // Tilde(~) at IBM 5576-A01 spec +#define JK_EQ S(KC_MINS) // = +#define JK_TLD S(JK_CIRC) // ~ +#define JK_PIPE S(KC_JYEN) // | +#define JK_GRV S(JK_AT) // ` +#define JK_LCBR S(JK_LBRC) // { +#define JK_PLUS S(KC_SCLN) // + +#define JK_ASTR S(JK_CLN) // * +#define JK_RCBR S(JK_RBRC) // } +#define JK_QUES S(KC_SLSH) // ? +#define JK_UNDS S(JK_BSLS) // _ + +enum user_macro { + UM_MHEN, + UM_HENK, + UM_DEBUG, +}; +#define M_MHEN MACROTAP(UM_MHEN) +#define M_HENK MACROTAP(UM_HENK) +#define M_DEBUG M(UM_DEBUG) + +enum keymap_layer { + KL_QWERTY, + KL_LOWER, + KL_RAISE, +}; +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [KL_QWERTY] = { + { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JK_CLN}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT}, + {KC_ZKHK, KC_KANA, KC_LGUI, KC_LALT, M_MHEN, KC_SPC, KC_SPC, M_HENK, KC_RALT, KC_RGUI, KC_APP, KC_ENT} + }, + + [KL_LOWER] = { + {KC_GESC, KC_EXLM, JK_DQT, KC_HASH, KC_DLR, KC_PERC, JK_AMPR, JK_SQT, JK_LPRN, JK_RPRN, JK_S0, KC_DEL}, + {_______, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_DEL, KC_BSPC, JK_EQ, JK_TLD, JK_GRV, JK_LCBR, JK_PIPE}, + {_______, C(KC_Z), C(KC_X), C(KC_C), C(KC_V), C(KC_Y), XXXXXXX, KC_ENT, KC_LABK, KC_RABK, JK_RCBR, JK_UNDS}, + { RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} + }, + + [KL_RAISE] = { + {KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, + {_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, JK_CIRC, JK_AT, JK_LBRC, KC_JYEN}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_COMM, KC_DOT, JK_RBRC, JK_BSLS}, + {M_DEBUG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} + }, + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + dprintf( "record.\n" + " event.pressed = %u\n" + " tap.count = %u\n" + " tap.interrupted = %u\n" + , record->event.pressed + , record->tap.count + , record->tap.interrupted ); + dprintf( "id = %u\n", id ); + dprintf( "opt = %u\n", opt ); + + switch(id) { + + case UM_MHEN: { + return MACRO_TAP_HOLD_LAYER( record, MACRO(TYPE(KC_MHEN), END), KL_LOWER ); + } break; + + case UM_HENK: { + return MACRO_TAP_HOLD_LAYER( record, MACRO(TYPE(KC_HENK), END), KL_RAISE ); + } break; + + case UM_DEBUG: { + if (record->event.pressed) { + debug_enable = !debug_enable; + if (debug_enable) { + dprint("\nDEBUG: enabled.\n"); + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + } + } break; + + } + return MACRO_NONE; +}; diff --git a/keyboards/planck/keymaps/rai-suta/readme.md b/keyboards/planck/keymaps/rai-suta/readme.md new file mode 100644 index 0000000000..cb73c172aa --- /dev/null +++ b/keyboards/planck/keymaps/rai-suta/readme.md @@ -0,0 +1,3 @@ +# rai-suta's Planck Layout + +This keymap assumes that the keyboard is recognized as JIS keyboard from the OS. -- cgit v1.2.3 From 43579a80a7bba63ddf2b3eceb4d05a51727a7cbb Mon Sep 17 00:00:00 2001 From: Art Ortenburger Date: Sun, 25 Jun 2017 22:30:07 -0300 Subject: add support for Orthodox keyboard (#1436) * Added orthodox * Modified readme * Modified readme * Modified readme * Updated makefile * Fixed keymap issues * Modified serial communications to allow for over 8 columns * Fixed sizeof command * Fixed some typing issues * Testing issue #1191 (n-column split i2c slave) Based on initial OrthoDox (serial) config by @reddragond and others, this attempts to add TWI (I2C) support. Relevant: - per @ahtn recommendation, using memcpy for moving slave matrix into slave sending buffer - slave buffer has been enlarged using sizeof(matrix_row_t) - note: i2c.h now includes matrix.h - note: matrix.c includes * Added i2c keymap - right col still not working * orthodox: re-added i2c keymap, based on serial * orthodox / issue #1191: trying 9-bit serial - orthodox serial protocol now sends 9 bits per row, instead of 16. Technically it's using MATRIX_COLS, so it might work generically. - ROW_MASK is #defined in serial.c to truncate the checksums to prevent overflows causing false errors. This macro should be renamed if it's kept. * Revert "Fixed sizeof command" This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9. Changes had been made to the lets_split serial driver for testing which mirrored the multi-byte-row changes made to support the orthodox. As the lets_split does not require these changes, and new improvements had been added to the orthodox port only, this commit reverts them. Because the new code could potentially reduce latency over the serial transport, it may be desirable to re-add in the future, by backporting the current working orthodox code. * orthodox: default serial keymap improvements - formatting has been improved - a few keys have been shifted, mainly in Raise and Lower layers, to be more like the default Planck layout - Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play Still To Do: - duplicate for TWI - Alt modifier - GUI modifier * orthodox: failed attempt at 16b/row TWI - duplicated updated serial keymap for "i2c" - removed string.h/memcpy, instead - hardcoded copying of six bytes per update - still doesn't work; master reports interconnect errors on txled * orthodox: adjusted default keymap - this is applied to both 'serial' and 'i2c' keymaps - Alt and GUI have been added, as they were missing - comma and period persist across more layers; Home/PgUp and End/PgDn have been moved slightly to accommodate * orthodox: revert TWI support to minimum to debug - disabled ssd1306 and hardware locking in build configuration - increased TWI buffer from 0x10 to 0x20 bytes - decreased TWI clock from 400000 to 100000 - removed hardcoded TWI multi-byte sending/receiving An 'i2c' build of this was found to work on a rev1 Orthodox, although slave-side col9 was understandably not working. When testing-time permits, features will be gradually re-enabled towards getting the full matrix supported over TWI. * orthodox: TWI (i2c) is working, kludge for col9 The TWI interconnect ("i2c" in directories and build config) is now working for the Orthodox, including the slave half's column #9. This is intended as an interim solution, as it's a kludge, not a fix. Rather than a working multi-byte implementation, the two col9 keys' bits are packed-into and unpacked-from the two unused bits in row1. Furthermore, the TWI clock constant has been reduced to 100000 from 400000, as testing revealed the higher value just didn't work. Testing also found that (with this kludge) increasing the TWI buffer was not necessary. This commit leaves many commented-out lines in matrix.c from previous testing, which will be removed in a future commit once the interconnects' multi-byte problems have been debugged more thoroughly. * orthodox: updated readme.md The readme for the Orthodox now includes a description of the keyboard, allusions to its author and availability, a linked photo, and links to the evolving build guide and the current keymap on KLE. This update has been prepared with /u/Deductivemonkee's assistance. --- keyboards/orthodox/Makefile | 5 + keyboards/orthodox/common/glcdfont.c | 276 +++++++++++++++++ keyboards/orthodox/config.h | 32 ++ keyboards/orthodox/i2c.c | 162 ++++++++++ keyboards/orthodox/i2c.h | 50 +++ keyboards/orthodox/keymaps/i2c/config.h | 34 +++ keyboards/orthodox/keymaps/i2c/keymap.c | 132 ++++++++ keyboards/orthodox/keymaps/serial/config.h | 34 +++ keyboards/orthodox/keymaps/serial/keymap.c | 132 ++++++++ keyboards/orthodox/matrix.c | 351 +++++++++++++++++++++ keyboards/orthodox/orthodox.c | 1 + keyboards/orthodox/orthodox.h | 30 ++ keyboards/orthodox/pro_micro.h | 362 ++++++++++++++++++++++ keyboards/orthodox/readme.md | 165 ++++++++++ keyboards/orthodox/rev1/Makefile | 3 + keyboards/orthodox/rev1/config.h | 99 ++++++ keyboards/orthodox/rev1/rev1.c | 32 ++ keyboards/orthodox/rev1/rev1.h | 25 ++ keyboards/orthodox/rev1/rules.mk | 5 + keyboards/orthodox/rules.mk | 87 ++++++ keyboards/orthodox/serial.c | 230 ++++++++++++++ keyboards/orthodox/serial.h | 27 ++ keyboards/orthodox/split_util.c | 84 ++++++ keyboards/orthodox/split_util.h | 24 ++ keyboards/orthodox/ssd1306.c | 470 +++++++++++++++++++++++++++++ keyboards/orthodox/ssd1306.h | 17 ++ 26 files changed, 2869 insertions(+) create mode 100644 keyboards/orthodox/Makefile create mode 100644 keyboards/orthodox/common/glcdfont.c create mode 100644 keyboards/orthodox/config.h create mode 100644 keyboards/orthodox/i2c.c create mode 100644 keyboards/orthodox/i2c.h create mode 100644 keyboards/orthodox/keymaps/i2c/config.h create mode 100644 keyboards/orthodox/keymaps/i2c/keymap.c create mode 100644 keyboards/orthodox/keymaps/serial/config.h create mode 100644 keyboards/orthodox/keymaps/serial/keymap.c create mode 100644 keyboards/orthodox/matrix.c create mode 100644 keyboards/orthodox/orthodox.c create mode 100644 keyboards/orthodox/orthodox.h create mode 100644 keyboards/orthodox/pro_micro.h create mode 100644 keyboards/orthodox/readme.md create mode 100644 keyboards/orthodox/rev1/Makefile create mode 100644 keyboards/orthodox/rev1/config.h create mode 100644 keyboards/orthodox/rev1/rev1.c create mode 100644 keyboards/orthodox/rev1/rev1.h create mode 100644 keyboards/orthodox/rev1/rules.mk create mode 100644 keyboards/orthodox/rules.mk create mode 100644 keyboards/orthodox/serial.c create mode 100644 keyboards/orthodox/serial.h create mode 100644 keyboards/orthodox/split_util.c create mode 100644 keyboards/orthodox/split_util.h create mode 100644 keyboards/orthodox/ssd1306.c create mode 100644 keyboards/orthodox/ssd1306.h (limited to 'keyboards') diff --git a/keyboards/orthodox/Makefile b/keyboards/orthodox/Makefile new file mode 100644 index 0000000000..f5c87d4d65 --- /dev/null +++ b/keyboards/orthodox/Makefile @@ -0,0 +1,5 @@ +SUBPROJECT_DEFAULT = rev2 + +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif diff --git a/keyboards/orthodox/common/glcdfont.c b/keyboards/orthodox/common/glcdfont.c new file mode 100644 index 0000000000..6f88bd23a7 --- /dev/null +++ b/keyboards/orthodox/common/glcdfont.c @@ -0,0 +1,276 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#ifndef FONT5X7_H +#define FONT5X7_H + +#ifdef __AVR__ + #include + #include +#elif defined(ESP8266) + #include +#else + #define PROGMEM +#endif + +// Standard ASCII 5x7 font + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, + 0x00, 0x18, 0x3C, 0x18, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, + 0x00, 0x18, 0x24, 0x18, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, + 0x30, 0x48, 0x3A, 0x06, 0x0E, + 0x26, 0x29, 0x79, 0x29, 0x26, + 0x40, 0x7F, 0x05, 0x05, 0x07, + 0x40, 0x7F, 0x05, 0x25, 0x3F, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, + 0x14, 0x22, 0x7F, 0x22, 0x14, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, + 0x06, 0x09, 0x7F, 0x01, 0x7F, + 0x00, 0x66, 0x89, 0x95, 0x6A, + 0x60, 0x60, 0x60, 0x60, 0x60, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, + 0x08, 0x04, 0x7E, 0x04, 0x08, + 0x10, 0x20, 0x7E, 0x20, 0x10, + 0x08, 0x08, 0x2A, 0x1C, 0x08, + 0x08, 0x1C, 0x2A, 0x08, 0x08, + 0x1E, 0x10, 0x10, 0x10, 0x10, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, + 0x30, 0x38, 0x3E, 0x38, 0x30, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, + 0x23, 0x13, 0x08, 0x64, 0x62, + 0x36, 0x49, 0x56, 0x20, 0x50, + 0x00, 0x08, 0x07, 0x03, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, + 0x08, 0x08, 0x3E, 0x08, 0x08, + 0x00, 0x80, 0x70, 0x30, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00, 0x60, 0x60, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, + 0x3E, 0x51, 0x49, 0x45, 0x3E, + 0x00, 0x42, 0x7F, 0x40, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, + 0x21, 0x41, 0x49, 0x4D, 0x33, + 0x18, 0x14, 0x12, 0x7F, 0x10, + 0x27, 0x45, 0x45, 0x45, 0x39, + 0x3C, 0x4A, 0x49, 0x49, 0x31, + 0x41, 0x21, 0x11, 0x09, 0x07, + 0x36, 0x49, 0x49, 0x49, 0x36, + 0x46, 0x49, 0x49, 0x29, 0x1E, + 0x00, 0x00, 0x14, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x00, 0x41, 0x22, 0x14, 0x08, + 0x02, 0x01, 0x59, 0x09, 0x06, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, + 0x7C, 0x12, 0x11, 0x12, 0x7C, + 0x7F, 0x49, 0x49, 0x49, 0x36, + 0x3E, 0x41, 0x41, 0x41, 0x22, + 0x7F, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x49, 0x49, 0x49, 0x41, + 0x7F, 0x09, 0x09, 0x09, 0x01, + 0x3E, 0x41, 0x41, 0x51, 0x73, + 0x7F, 0x08, 0x08, 0x08, 0x7F, + 0x00, 0x41, 0x7F, 0x41, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, + 0x7F, 0x08, 0x14, 0x22, 0x41, + 0x7F, 0x40, 0x40, 0x40, 0x40, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, + 0x7F, 0x04, 0x08, 0x10, 0x7F, + 0x3E, 0x41, 0x41, 0x41, 0x3E, + 0x7F, 0x09, 0x09, 0x09, 0x06, + 0x3E, 0x41, 0x51, 0x21, 0x5E, + 0x7F, 0x09, 0x19, 0x29, 0x46, + 0x26, 0x49, 0x49, 0x49, 0x32, + 0x03, 0x01, 0x7F, 0x01, 0x03, + 0x3F, 0x40, 0x40, 0x40, 0x3F, + 0x1F, 0x20, 0x40, 0x20, 0x1F, + 0x3F, 0x40, 0x38, 0x40, 0x3F, + 0x63, 0x14, 0x08, 0x14, 0x63, + 0x03, 0x04, 0x78, 0x04, 0x03, + 0x61, 0x59, 0x49, 0x4D, 0x43, + 0x00, 0x7F, 0x41, 0x41, 0x41, + 0x02, 0x04, 0x08, 0x10, 0x20, + 0x00, 0x41, 0x41, 0x41, 0x7F, + 0x04, 0x02, 0x01, 0x02, 0x04, + 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x03, 0x07, 0x08, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, + 0x7F, 0x28, 0x44, 0x44, 0x38, + 0x38, 0x44, 0x44, 0x44, 0x28, + 0x38, 0x44, 0x44, 0x28, 0x7F, + 0x38, 0x54, 0x54, 0x54, 0x18, + 0x00, 0x08, 0x7E, 0x09, 0x02, + 0x18, 0xA4, 0xA4, 0x9C, 0x78, + 0x7F, 0x08, 0x04, 0x04, 0x78, + 0x00, 0x44, 0x7D, 0x40, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, + 0x7C, 0x08, 0x04, 0x04, 0x78, + 0x38, 0x44, 0x44, 0x44, 0x38, + 0xFC, 0x18, 0x24, 0x24, 0x18, + 0x18, 0x24, 0x24, 0x18, 0xFC, + 0x7C, 0x08, 0x04, 0x04, 0x08, + 0x48, 0x54, 0x54, 0x54, 0x24, + 0x04, 0x04, 0x3F, 0x44, 0x24, + 0x3C, 0x40, 0x40, 0x20, 0x7C, + 0x1C, 0x20, 0x40, 0x20, 0x1C, + 0x3C, 0x40, 0x30, 0x40, 0x3C, + 0x44, 0x28, 0x10, 0x28, 0x44, + 0x4C, 0x90, 0x90, 0x90, 0x7C, + 0x44, 0x64, 0x54, 0x4C, 0x44, + 0x00, 0x08, 0x36, 0x41, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, + 0x3C, 0x26, 0x23, 0x26, 0x3C, + 0x1E, 0xA1, 0xA1, 0x61, 0x12, + 0x3A, 0x40, 0x40, 0x20, 0x7A, + 0x38, 0x54, 0x54, 0x55, 0x59, + 0x21, 0x55, 0x55, 0x79, 0x41, + 0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut + 0x21, 0x55, 0x54, 0x78, 0x40, + 0x20, 0x54, 0x55, 0x79, 0x40, + 0x0C, 0x1E, 0x52, 0x72, 0x12, + 0x39, 0x55, 0x55, 0x55, 0x59, + 0x39, 0x54, 0x54, 0x54, 0x59, + 0x39, 0x55, 0x54, 0x54, 0x58, + 0x00, 0x00, 0x45, 0x7C, 0x41, + 0x00, 0x02, 0x45, 0x7D, 0x42, + 0x00, 0x01, 0x45, 0x7C, 0x40, + 0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut + 0xF0, 0x28, 0x25, 0x28, 0xF0, + 0x7C, 0x54, 0x55, 0x45, 0x00, + 0x20, 0x54, 0x54, 0x7C, 0x54, + 0x7C, 0x0A, 0x09, 0x7F, 0x49, + 0x32, 0x49, 0x49, 0x49, 0x32, + 0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut + 0x32, 0x4A, 0x48, 0x48, 0x30, + 0x3A, 0x41, 0x41, 0x21, 0x7A, + 0x3A, 0x42, 0x40, 0x20, 0x78, + 0x00, 0x9D, 0xA0, 0xA0, 0x7D, + 0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut + 0x3D, 0x40, 0x40, 0x40, 0x3D, + 0x3C, 0x24, 0xFF, 0x24, 0x24, + 0x48, 0x7E, 0x49, 0x43, 0x66, + 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, + 0xFF, 0x09, 0x29, 0xF6, 0x20, + 0xC0, 0x88, 0x7E, 0x09, 0x03, + 0x20, 0x54, 0x54, 0x79, 0x41, + 0x00, 0x00, 0x44, 0x7D, 0x41, + 0x30, 0x48, 0x48, 0x4A, 0x32, + 0x38, 0x40, 0x40, 0x22, 0x7A, + 0x00, 0x7A, 0x0A, 0x0A, 0x72, + 0x7D, 0x0D, 0x19, 0x31, 0x7D, + 0x26, 0x29, 0x29, 0x2F, 0x28, + 0x26, 0x29, 0x29, 0x29, 0x26, + 0x30, 0x48, 0x4D, 0x40, 0x20, + 0x38, 0x08, 0x08, 0x08, 0x08, + 0x08, 0x08, 0x08, 0x08, 0x38, + 0x2F, 0x10, 0xC8, 0xAC, 0xBA, + 0x2F, 0x10, 0x28, 0x34, 0xFA, + 0x00, 0x00, 0x7B, 0x00, 0x00, + 0x08, 0x14, 0x2A, 0x14, 0x22, + 0x22, 0x14, 0x2A, 0x14, 0x08, + 0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code + 0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block + 0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block + 0x00, 0x00, 0x00, 0xFF, 0x00, + 0x10, 0x10, 0x10, 0xFF, 0x00, + 0x14, 0x14, 0x14, 0xFF, 0x00, + 0x10, 0x10, 0xFF, 0x00, 0xFF, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x14, 0x14, 0x14, 0xFC, 0x00, + 0x14, 0x14, 0xF7, 0x00, 0xFF, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x14, 0x14, 0xF4, 0x04, 0xFC, + 0x14, 0x14, 0x17, 0x10, 0x1F, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0x1F, 0x00, + 0x10, 0x10, 0x10, 0xF0, 0x00, + 0x00, 0x00, 0x00, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0x1F, 0x10, + 0x10, 0x10, 0x10, 0xF0, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x10, + 0x10, 0x10, 0x10, 0x10, 0x10, + 0x10, 0x10, 0x10, 0xFF, 0x10, + 0x00, 0x00, 0x00, 0xFF, 0x14, + 0x00, 0x00, 0xFF, 0x00, 0xFF, + 0x00, 0x00, 0x1F, 0x10, 0x17, + 0x00, 0x00, 0xFC, 0x04, 0xF4, + 0x14, 0x14, 0x17, 0x10, 0x17, + 0x14, 0x14, 0xF4, 0x04, 0xF4, + 0x00, 0x00, 0xFF, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x14, 0x14, + 0x14, 0x14, 0xF7, 0x00, 0xF7, + 0x14, 0x14, 0x14, 0x17, 0x14, + 0x10, 0x10, 0x1F, 0x10, 0x1F, + 0x14, 0x14, 0x14, 0xF4, 0x14, + 0x10, 0x10, 0xF0, 0x10, 0xF0, + 0x00, 0x00, 0x1F, 0x10, 0x1F, + 0x00, 0x00, 0x00, 0x1F, 0x14, + 0x00, 0x00, 0x00, 0xFC, 0x14, + 0x00, 0x00, 0xF0, 0x10, 0xF0, + 0x10, 0x10, 0xFF, 0x10, 0xFF, + 0x14, 0x14, 0x14, 0xFF, 0x14, + 0x10, 0x10, 0x10, 0x1F, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0x10, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x38, 0x44, 0x44, 0x38, 0x44, + 0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta + 0x7E, 0x02, 0x02, 0x06, 0x06, + 0x02, 0x7E, 0x02, 0x7E, 0x02, + 0x63, 0x55, 0x49, 0x41, 0x63, + 0x38, 0x44, 0x44, 0x3C, 0x04, + 0x40, 0x7E, 0x20, 0x1E, 0x20, + 0x06, 0x02, 0x7E, 0x02, 0x02, + 0x99, 0xA5, 0xE7, 0xA5, 0x99, + 0x1C, 0x2A, 0x49, 0x2A, 0x1C, + 0x4C, 0x72, 0x01, 0x72, 0x4C, + 0x30, 0x4A, 0x4D, 0x4D, 0x30, + 0x30, 0x48, 0x78, 0x48, 0x30, + 0xBC, 0x62, 0x5A, 0x46, 0x3D, + 0x3E, 0x49, 0x49, 0x49, 0x00, + 0x7E, 0x01, 0x01, 0x01, 0x7E, + 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, + 0x44, 0x44, 0x5F, 0x44, 0x44, + 0x40, 0x51, 0x4A, 0x44, 0x40, + 0x40, 0x44, 0x4A, 0x51, 0x40, + 0x00, 0x00, 0xFF, 0x01, 0x03, + 0xE0, 0x80, 0xFF, 0x00, 0x00, + 0x08, 0x08, 0x6B, 0x6B, 0x08, + 0x36, 0x12, 0x36, 0x24, 0x36, + 0x06, 0x0F, 0x09, 0x0F, 0x06, + 0x00, 0x00, 0x18, 0x18, 0x00, + 0x00, 0x00, 0x10, 0x10, 0x00, + 0x30, 0x40, 0xFF, 0x01, 0x01, + 0x00, 0x1F, 0x01, 0x01, 0x1E, + 0x00, 0x19, 0x1D, 0x17, 0x12, + 0x00, 0x3C, 0x3C, 0x3C, 0x3C, + 0x00, 0x00, 0x00, 0x00, 0x00 // #255 NBSP +}; +#endif // FONT5X7_H diff --git a/keyboards/orthodox/config.h b/keyboards/orthodox/config.h new file mode 100644 index 0000000000..008fb09789 --- /dev/null +++ b/keyboards/orthodox/config.h @@ -0,0 +1,32 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +#ifdef SUBPROJECT_rev1 + #include "rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif +#endif diff --git a/keyboards/orthodox/i2c.c b/keyboards/orthodox/i2c.c new file mode 100644 index 0000000000..084c890c40 --- /dev/null +++ b/keyboards/orthodox/i2c.c @@ -0,0 +1,162 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +#ifdef USE_I2C + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< +#include "matrix.h" + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000UL + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + + +static inline unsigned char i2c_start_read(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_READ); +} + +static inline unsigned char i2c_start_write(unsigned char addr) { + return i2c_master_start((addr << 1) | I2C_WRITE); +} + +// from SSD1306 scrips +extern unsigned char i2c_rep_start(unsigned char addr); +extern void i2c_start_wait(unsigned char addr); +extern unsigned char i2c_readAck(void); +extern unsigned char i2c_readNak(void); +extern unsigned char i2c_read(unsigned char ack); + +#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); + +#endif diff --git a/keyboards/orthodox/keymaps/i2c/config.h b/keyboards/orthodox/keymaps/i2c/config.h new file mode 100644 index 0000000000..5425297199 --- /dev/null +++ b/keyboards/orthodox/keymaps/i2c/config.h @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#define USE_I2C + +//#define MASTER_LEFT +//#define _MASTER_RIGHT +#define EE_HANDS + + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/orthodox/keymaps/i2c/keymap.c b/keyboards/orthodox/keymaps/i2c/keymap.c new file mode 100644 index 0000000000..ed24a3a1f0 --- /dev/null +++ b/keyboards/orthodox/keymaps/i2c/keymap.c @@ -0,0 +1,132 @@ +#include "orthodox.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define LS__SPC MT(MOD_LSFT, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LEFT, XXXXXXX, KC_DOWN, KC_UP, XXXXXXX, KC_RIGHT,KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, LOWER, KC_BSPC, KC_ENT, KC_RALT, LS__SPC, RAISE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI \ +), + +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LCTL, XXXXXXX, _______, _______, XXXXXXX, KC_RCTL, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, KC_F12, KC_HOME, KC_COMM, KC_DOT, KC_END, _______ \ +), + +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, XXXXXXX, _______, _______, XXXXXXX, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, KC_F12, KC_PGUP, KC_COMM, KC_DOT, KC_PGDN, _______ \ +), + +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, XXXXXXX, _______, _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/orthodox/keymaps/serial/config.h b/keyboards/orthodox/keymaps/serial/config.h new file mode 100644 index 0000000000..5169452baa --- /dev/null +++ b/keyboards/orthodox/keymaps/serial/config.h @@ -0,0 +1,34 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#define USE_SERIAL + +//#define MASTER_LEFT +//#define _MASTER_RIGHT +#define EE_HANDS + + +#ifdef SUBPROJECT_rev1 + #include "../../rev1/config.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "../../rev2/config.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "../../rev2fliphalf/config.h" +#endif diff --git a/keyboards/orthodox/keymaps/serial/keymap.c b/keyboards/orthodox/keymaps/serial/keymap.c new file mode 100644 index 0000000000..ed24a3a1f0 --- /dev/null +++ b/keyboards/orthodox/keymaps/serial/keymap.c @@ -0,0 +1,132 @@ +#include "orthodox.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +#define LS__SPC MT(MOD_LSFT, KC_SPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LEFT, XXXXXXX, KC_DOWN, KC_UP, XXXXXXX, KC_RIGHT,KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, LOWER, KC_BSPC, KC_ENT, KC_RALT, LS__SPC, RAISE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI \ +), + +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LCTL, XXXXXXX, _______, _______, XXXXXXX, KC_RCTL, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, KC_F12, KC_HOME, KC_COMM, KC_DOT, KC_END, _______ \ +), + +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, XXXXXXX, _______, _______, XXXXXXX, _______, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, _______, _______, _______, _______, KC_F12, KC_PGUP, KC_COMM, KC_DOT, KC_PGDN, _______ \ +), + +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, _______, XXXXXXX, _______, _______, XXXXXXX, _______, AG_SWAP, QWERTY , COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistent_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/orthodox/matrix.c b/keyboards/orthodox/matrix.c new file mode 100644 index 0000000000..3b60cead84 --- /dev/null +++ b/keyboards/orthodox/matrix.c @@ -0,0 +1,351 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#ifdef USE_I2C +// provides memcpy for copying TWI slave buffer +// #include +#endif +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else // USE_SERIAL +# include "serial.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matrix so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +#ifdef USE_I2C + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + /* + // read from TWI byte-by-byte into matrix_row_t memory space + size_t i; + for (i = 0; i < SLAVE_BUFFER_SIZE-1; ++i) { + *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_ACK); + } + // last byte to be read / end of chunk + *((uint8_t*)&matrix[slaveOffset]+i) = i2c_master_read(I2C_NACK); + */ + + // kludge for column #9: unpack bits for keys (2,9) and (3,9) from (1,7) and (1,8) + // i2c_master_read(I2C_ACK); + matrix[slaveOffset+0] = i2c_master_read(I2C_ACK); + // i2c_master_read(I2C_ACK); + matrix[slaveOffset+1] = (matrix_row_t)i2c_master_read(I2C_ACK)\ + | (matrix[slaveOffset+0]&0x40U)<<2; + // i2c_master_read(I2C_ACK); + matrix[slaveOffset+2] = (matrix_row_t)i2c_master_read(I2C_NACK)\ + | (matrix[slaveOffset+0]&0x80U)<<1; + // clear highest two bits on row 1, where the col9 bits were transported + matrix[slaveOffset+0] &= 0x3F; + + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnected, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#else // USE_SERIAL + +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else // USE_SERIAL + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + matrix_scan_quantum(); + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; + +#ifdef USE_I2C + // SLAVE_BUFFER_SIZE is from i2c.h + // (MATRIX_ROWS/2*sizeof(matrix_row_t)) + // memcpy((void*)i2c_slave_buffer, (const void*)&matrix[offset], (ROWS_PER_HAND*sizeof(matrix_row_t))); + + // kludge for column #9: put bits for keys (2,9) and (3,9) into (1,7) and (1,8) + i2c_slave_buffer[0] = (uint8_t)(matrix[offset+0])\ + | (matrix[offset+1]&0x100U)>>2\ + | (matrix[offset+2]&0x100U)>>1; + i2c_slave_buffer[1] = (uint8_t)(matrix[offset+1]); + i2c_slave_buffer[2] = (uint8_t)(matrix[offset+2]); + // note: looks like a possible operator-precedence bug here, in last version? + /* + i2c_slave_buffer[1] = (uint8_t)matrix[offset+0]; + i2c_slave_buffer[2] = (uint8_t)(matrix[offset+1]>>8); + i2c_slave_buffer[3] = (uint8_t)(matrix[offset+1]>>8); + i2c_slave_buffer[4] = (uint8_t)(matrix[offset+2]>>8); + i2c_slave_buffer[5] = (uint8_t)matrix[offset+2]; + */ +#else // USE_SERIAL + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/orthodox/orthodox.c b/keyboards/orthodox/orthodox.c new file mode 100644 index 0000000000..0b366e9449 --- /dev/null +++ b/keyboards/orthodox/orthodox.c @@ -0,0 +1 @@ +#include "orthodox.h" \ No newline at end of file diff --git a/keyboards/orthodox/orthodox.h b/keyboards/orthodox/orthodox.h new file mode 100644 index 0000000000..bb7efb6ad1 --- /dev/null +++ b/keyboards/orthodox/orthodox.h @@ -0,0 +1,30 @@ +#ifndef ORTHODOX_H +#define ORTHODOX_H + +#ifdef SUBPROJECT_rev1 + #include "rev1.h" +#endif +#ifdef SUBPROJECT_rev2 + #include "rev2.h" +#endif +#ifdef SUBPROJECT_rev2fliphalf + #include "rev2fliphalf.h" +#endif + +// Used to create a keymap using only KC_ prefixed keys +#define KC_KEYMAP( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + KEYMAP( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + +#include "quantum.h" + +#endif \ No newline at end of file diff --git a/keyboards/orthodox/pro_micro.h b/keyboards/orthodox/pro_micro.h new file mode 100644 index 0000000000..f9e7ed75d9 --- /dev/null +++ b/keyboards/orthodox/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t ADC0 = 18; +static const uint8_t ADC1 = 19; +static const uint8_t ADC2 = 20; +static const uint8_t ADC3 = 21; +static const uint8_t ADC4 = 22; +static const uint8_t ADC5 = 23; +static const uint8_t ADC6 = 24; // D4 +static const uint8_t ADC7 = 25; // D6 +static const uint8_t ADC8 = 26; // D8 +static const uint8_t ADC9 = 27; // D9 +static const uint8_t ADC10 = 28; // D10 +static const uint8_t ADC11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/orthodox/readme.md b/keyboards/orthodox/readme.md new file mode 100644 index 0000000000..94bb8ebb97 --- /dev/null +++ b/keyboards/orthodox/readme.md @@ -0,0 +1,165 @@ +Orthodox +======== + +*Please note this guide is a work in progress and is based directly on the Let's Split guide.* + +Orthodox is a split ortholinear keyboard with thumb-clusters designed in 2017 by /u/Deductivemonkee, expected to be available in group buys. +Each half has 18 keys in a 3x6 grid and a five key thumb-cluster, of which three use 1.25-unit keycaps. + +![Example prototype build by /u/Deductivemonkee](http://i.imgur.com/R4PPKdog.jpg) + +Its firmware is based on the Let's Split's. +Each side is controlled by an Arduino Pro Micro (or compatible), and they're connected by a TRRS cable using the serial protocol. +Support for the protocol using TWI (i2c®) is a work-in-progress. + + +## Revisions + +- `Rev.1` Prototype GB version, supporting only Pro Micro in the corner footprint, and using PCB top- and bottom-plates. + +Note that the second number after the `Rev.` text is the pcb *order number.* The prototypes will say 1, and the next order of any revision will say 2 and so on. + +## Keymaps + +[The default layout can be unofficially referred to here.](http://www.keyboard-layout-editor.com/#/gists/f120e2703a22a6a69c7be9a65a9d1342) + +The thumb-clusters are an extension of row 2 and row 3 along columns 7, 8, and 9. +Row 2 does not have a physical key in column 8, so when editing keymaps a placeholder constant (`XXXXXXX` or `KC_NO`) must be used in the row2-col8 position. + +## Build Guide + +[Official build guide by /u/Deductivemonkee](http://imgur.com/a/9c0NP) + +For further reading on build- and flashing-procedures for split ortholinear skeleton-case keyboards, please refer to [An Overly Verbose Guide to Building a Let's Split Keyboard](https://github.com/nicinabox/lets-split-guide), much of which can be applied to the Orthodox. + +## First Time Setup + +Download or clone the whole firmware and navigate to the keyboards/orthodox directory. Once your dev env is setup, you'll be able to generate the default .hex using: + +``` +$ make rev1 +``` + +You will see a lot of output and if everything worked correctly you will see the built hex files in your *root qmk_firmware directory* two levels up: + +``` +orthodox_rev1_serial.hex +``` + +If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: + + +``` +$ make rev1-YOUR_KEYMAP_NAME +``` + +If everything worked correctly you will see a file: + +``` +orthodox_rev1_YOUR_KEYMAP_NAME.hex +``` + +For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. + + +Features +-------- + +For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). + +Some features supported by the firmware: + +* Either half can connect to the computer via USB, or both halves can be used + independently. +* You only need 3 wires to connect the two halves. Two for VCC and GND and one + for serial communication. + + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. +* 2 TRRS sockets and 1 TRRS cable + + +Notes on Software Configuration +------------------------------- + +Configuring the firmware is similar to any other QMK project. One thing +to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between +the two halves, i.e. if your split keyboard has 3 rows in each half, then +`MATRIX_ROWS=6`. + + +Flashing +------- +From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing. +Example: `make rev2-serial-avrdude` + + +Choosing which board to plug the USB cable into (choosing Master) +-------- +Because the two boards are identical, the firmware has logic to differentiate the left and right board. + +It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. + +The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. + +The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. + +### Setting the left hand as master +If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. + +### Setting the right hand as master +If you always plug the usb cable into the right board, add an extra flag to your `config.h` +``` + #define MASTER_RIGHT +``` + +### Setting EE_hands to use either hands as master +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. + +The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep +// or the equivalent in dfu-programmer + +``` +and similarly for right half +``` +avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep +// or the equivalent in dfu-programmer +``` + +NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) + +After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout using bootmagic's default layout option. +Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + +Notes on Using Pro Micro 3.3V +----------------------------- + +Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects +the frequency on the 3.3V board. + +Also, if the slave board is producing weird characters in certain columns, +update the following line in `matrix.c` to the following: + +``` +// _delay_us(30); // without this wait read unstable value. +_delay_us(300); // without this wait read unstable value. +``` diff --git a/keyboards/orthodox/rev1/Makefile b/keyboards/orthodox/rev1/Makefile new file mode 100644 index 0000000000..4e2a6f00fd --- /dev/null +++ b/keyboards/orthodox/rev1/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/orthodox/rev1/config.h b/keyboards/orthodox/rev1/config.h new file mode 100644 index 0000000000..46bb994402 --- /dev/null +++ b/keyboards/orthodox/rev1/config.h @@ -0,0 +1,99 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER deductivemonkee +#define PRODUCT Monkeebs Orthodox Rev.1 +#define DESCRIPTION Oreodox + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 6 +#define MATRIX_COLS 9 + +// wiring of each half + + +//PRO MICRO +#define MATRIX_ROW_PINS { D4, B4, B5 } +#define MATRIX_COL_PINS { D7, F4, F5, F6, F7, B1, B3, B2, B6 } +//#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4, D7 } + +/*/ +//TEENSY +#define MATRIX_ROW_PINS { D0, C6, C7, } +#define MATRIX_COL_PINS { D2, F5, F6, F7, B6, B5, B4, D7, D6 } +/*/ + +#define CATERINA_BOOTLOADER + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +// #define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +// #define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* ws2812 RGB LED */ +//#define RGB_DI_PIN D3 +//#define RGBLIGHT_TIMER +//#define RGBLED_NUM 16 // Number of LEDs +//#define ws2812_PORTREG PORTD +//#define ws2812_DDRREG DDRD + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +// #define NO_DEBUG + +/* disable print */ +// #define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/orthodox/rev1/rev1.c b/keyboards/orthodox/rev1/rev1.c new file mode 100644 index 0000000000..10ece03f08 --- /dev/null +++ b/keyboards/orthodox/rev1/rev1.c @@ -0,0 +1,32 @@ +#include "orthodox.h" + +#ifdef AUDIO_ENABLE + float tone_startup[][2] = SONG(STARTUP_SOUND); + float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void matrix_init_kb(void) { + + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + +void shutdown_user(void) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); + #endif +} diff --git a/keyboards/orthodox/rev1/rev1.h b/keyboards/orthodox/rev1/rev1.h new file mode 100644 index 0000000000..4f163299d1 --- /dev/null +++ b/keyboards/orthodox/rev1/rev1.h @@ -0,0 +1,25 @@ +#ifndef REV1_H +#define REV1_H + +#include "../orthodox.h" + +//void promicro_bootloader_jmp(bool program); +#include "quantum.h" + +//void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, L16, L17, L18, R10, R11, R12, R13, R14, R15, R16, R17, R18, \ + L20, L21, L22, L23, L24, L25, L26, L27, L28, R20, R21, R22, R23, R24, R25, R26, R27, R28 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15, L16, L17, L18}, \ + { L20, L21, L22, L23, L24, L25, L26, L27, L28 }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R18, R17, R16, R15, R14, R13, R12, R11, R10 }, \ + { R28, R27, R26, R25, R24, R23, R22, R21, R20 } \ + } + +#endif \ No newline at end of file diff --git a/keyboards/orthodox/rev1/rules.mk b/keyboards/orthodox/rev1/rules.mk new file mode 100644 index 0000000000..a0825b4ef6 --- /dev/null +++ b/keyboards/orthodox/rev1/rules.mk @@ -0,0 +1,5 @@ +BACKLIGHT_ENABLE = no + +ifndef QUANTUM_DIR + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk new file mode 100644 index 0000000000..0efa785505 --- /dev/null +++ b/keyboards/orthodox/rules.mk @@ -0,0 +1,87 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 ?= yes +USE_I2C ?= yes +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude diff --git a/keyboards/orthodox/serial.c b/keyboards/orthodox/serial.c new file mode 100644 index 0000000000..4936e4249f --- /dev/null +++ b/keyboards/orthodox/serial.c @@ -0,0 +1,230 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include "serial.h" + +#ifdef USE_SERIAL + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +matrix_row_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +matrix_row_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define ROW_MASK (((matrix_row_t)0-1)>>(8*sizeof(matrix_row_t)-MATRIX_COLS)) + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +matrix_row_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +matrix_row_t serial_read_byte(void) { + matrix_row_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < MATRIX_COLS; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(matrix_row_t data) { + matrix_row_t b = MATRIX_COLS; + serial_output(); + while( b-- ) { + if(data & (1UL << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + matrix_row_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += ROW_MASK & serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + matrix_row_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += ROW_MASK & serial_master_buffer[i]; + } + matrix_row_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + matrix_row_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += ROW_MASK & serial_slave_buffer[i]; + } + matrix_row_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + matrix_row_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += ROW_MASK & serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} + +#endif diff --git a/keyboards/orthodox/serial.h b/keyboards/orthodox/serial.h new file mode 100644 index 0000000000..a46a98c947 --- /dev/null +++ b/keyboards/orthodox/serial.h @@ -0,0 +1,27 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include +#include "matrix.h" + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile matrix_row_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile matrix_row_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/orthodox/split_util.c b/keyboards/orthodox/split_util.c new file mode 100644 index 0000000000..39639c3b4b --- /dev/null +++ b/keyboards/orthodox/split_util.c @@ -0,0 +1,84 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" + +#ifdef USE_I2C +# include "i2c.h" +#else +# include "serial.h" +#endif + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c + #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#ifdef SSD1306OLED + matrix_master_OLED_init (); +#endif +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< + +#ifdef EE_HANDS + #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 + #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END +#endif + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +void matrix_master_OLED_init (void); + +#endif diff --git a/keyboards/orthodox/ssd1306.c b/keyboards/orthodox/ssd1306.c new file mode 100644 index 0000000000..5c6dff27f8 --- /dev/null +++ b/keyboards/orthodox/ssd1306.c @@ -0,0 +1,470 @@ +#ifdef SSD1306OLED + +#include "ssd1306.h" +#include "config.h" +#include "i2c.h" +#include +#include "print.h" +#include "lets_split.h" +#include "common/glcdfont.c" +#ifdef ADAFRUIT_BLE_ENABLE +#include "adafruit_ble.h" +#endif +#ifdef PROTOCOL_LUFA +#include "lufa.h" +#endif +#include "sendchar.h" +#include "pincontrol.h" + +//assign the right code to your layers +#define _BASE 0 +#define _LOWER 8 +#define _RAISE 16 +#define _FNLAYER 64 +#define _NUMLAY 128 +#define _NLOWER 136 +#define _NFNLAYER 192 +#define _MOUSECURSOR 256 +#define _ADJUST 65560 + +// Set this to 1 to help diagnose early startup problems +// when testing power-on with ble. Turn it off otherwise, +// as the latency of printing most of the debug info messes +// with the matrix scan, causing keys to drop. +#define DEBUG_TO_SCREEN 0 + +// Controls the SSD1306 128x32 OLED display via i2c + +#define i2cAddress 0x3C + +#define DisplayHeight 32 +#define DisplayWidth 128 + +#define FontHeight 8 +#define FontWidth 6 + +#define MatrixRows (DisplayHeight / FontHeight) +#define MatrixCols (DisplayWidth / FontWidth) + +struct CharacterMatrix { + uint8_t display[MatrixRows][MatrixCols]; + uint8_t *cursor; + bool dirty; +}; + +static struct CharacterMatrix display; +//static uint16_t last_battery_update; +//static uint32_t vbat; +//#define BatteryUpdateInterval 10000 /* milliseconds */ +#define ScreenOffInterval 300000 /* milliseconds */ +#if DEBUG_TO_SCREEN +static uint8_t displaying; +#endif +static uint16_t last_flush; + +enum ssd1306_cmds { + DisplayOff = 0xAE, + DisplayOn = 0xAF, + + SetContrast = 0x81, + DisplayAllOnResume = 0xA4, + + DisplayAllOn = 0xA5, + NormalDisplay = 0xA6, + InvertDisplay = 0xA7, + SetDisplayOffset = 0xD3, + SetComPins = 0xda, + SetVComDetect = 0xdb, + SetDisplayClockDiv = 0xD5, + SetPreCharge = 0xd9, + SetMultiPlex = 0xa8, + SetLowColumn = 0x00, + SetHighColumn = 0x10, + SetStartLine = 0x40, + + SetMemoryMode = 0x20, + ColumnAddr = 0x21, + PageAddr = 0x22, + + ComScanInc = 0xc0, + ComScanDec = 0xc8, + SegRemap = 0xa0, + SetChargePump = 0x8d, + ExternalVcc = 0x01, + SwitchCapVcc = 0x02, + + ActivateScroll = 0x2f, + DeActivateScroll = 0x2e, + SetVerticalScrollArea = 0xa3, + RightHorizontalScroll = 0x26, + LeftHorizontalScroll = 0x27, + VerticalAndRightHorizontalScroll = 0x29, + VerticalAndLeftHorizontalScroll = 0x2a, +}; + + +// Write command sequence. +// Returns true on success. +static inline bool _send_cmd1(uint8_t cmd) { + bool res = false; + + if (i2c_start_write(i2cAddress)) { + xprintf("failed to start write to %d\n", i2cAddress); + goto done; + } + + if (i2c_master_write(0x0 /* command byte follows */)) { + print("failed to write control byte\n"); + + goto done; + } + + if (i2c_master_write(cmd)) { + xprintf("failed to write command %d\n", cmd); + goto done; + } + res = true; +done: + i2c_master_stop(); + return res; +} + +// Write 2-byte command sequence. +// Returns true on success +static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) { + if (!_send_cmd1(cmd)) { + return false; + } + return _send_cmd1(opr); +} + +// Write 3-byte command sequence. +// Returns true on success +static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) { + if (!_send_cmd1(cmd)) { + return false; + } + if (!_send_cmd1(opr1)) { + return false; + } + return _send_cmd1(opr2); +} + +#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;} +#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;} +#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;} + +static void matrix_clear(struct CharacterMatrix *matrix); + +static void clear_display(void) { + matrix_clear(&display); + + // Clear all of the display bits (there can be random noise + // in the RAM on startup) + send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1); + send_cmd3(ColumnAddr, 0, DisplayWidth - 1); + + if (i2c_start_write(i2cAddress)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < DisplayWidth; ++col) { + i2c_master_write(0); + } + } + + display.dirty = false; + +done: + i2c_master_stop(); +} + +#if DEBUG_TO_SCREEN +#undef sendchar +static int8_t capture_sendchar(uint8_t c) { + sendchar(c); + iota_gfx_write_char(c); + + if (!displaying) { + iota_gfx_flush(); + } + return 0; +} +#endif + +bool iota_gfx_init(void) { + bool success = false; + + send_cmd1(DisplayOff); + send_cmd2(SetDisplayClockDiv, 0x80); + send_cmd2(SetMultiPlex, DisplayHeight - 1); + + send_cmd2(SetDisplayOffset, 0); + + + send_cmd1(SetStartLine | 0x0); + send_cmd2(SetChargePump, 0x14 /* Enable */); + send_cmd2(SetMemoryMode, 0 /* horizontal addressing */); + +/// Flips the display orientation 0 degrees + send_cmd1(SegRemap | 0x1); + send_cmd1(ComScanDec); +/* +// the following Flip the display orientation 180 degrees + send_cmd1(SegRemap); + send_cmd1(ComScanInc); +// end flip */ + send_cmd2(SetComPins, 0x2); + send_cmd2(SetContrast, 0x8f); + send_cmd2(SetPreCharge, 0xf1); + send_cmd2(SetVComDetect, 0x40); + send_cmd1(DisplayAllOnResume); + send_cmd1(NormalDisplay); + send_cmd1(DeActivateScroll); + send_cmd1(DisplayOn); + + send_cmd2(SetContrast, 0); // Dim + + clear_display(); + + success = true; + + iota_gfx_flush(); + +#if DEBUG_TO_SCREEN + print_set_sendchar(capture_sendchar); +#endif + +done: + return success; +} + +bool iota_gfx_off(void) { + bool success = false; + + send_cmd1(DisplayOff); + success = true; + +done: + return success; +} + +bool iota_gfx_on(void) { + bool success = false; + + send_cmd1(DisplayOn); + success = true; + +done: + return success; +} + +static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) { + *matrix->cursor = c; + ++matrix->cursor; + + if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) { + // We went off the end; scroll the display upwards by one line + memmove(&matrix->display[0], &matrix->display[1], + MatrixCols * (MatrixRows - 1)); + matrix->cursor = &matrix->display[MatrixRows - 1][0]; + memset(matrix->cursor, ' ', MatrixCols); + } +} + +static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) { + matrix->dirty = true; + + if (c == '\n') { + // Clear to end of line from the cursor and then move to the + // start of the next line + uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols; + + while (cursor_col++ < MatrixCols) { + matrix_write_char_inner(matrix, ' '); + } + return; + } + + matrix_write_char_inner(matrix, c); +} + +void iota_gfx_write_char(uint8_t c) { + matrix_write_char(&display, c); +} + +static void matrix_write(struct CharacterMatrix *matrix, const char *data) { + const char *end = data + strlen(data); + while (data < end) { + matrix_write_char(matrix, *data); + ++data; + } +} + +void iota_gfx_write(const char *data) { + matrix_write(&display, data); +} + +static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) { + while (true) { + uint8_t c = pgm_read_byte(data); + if (c == 0) { + return; + } + matrix_write_char(matrix, c); + ++data; + } +} + +void iota_gfx_write_P(const char *data) { + matrix_write_P(&display, data); +} + +static void matrix_clear(struct CharacterMatrix *matrix) { + memset(matrix->display, ' ', sizeof(matrix->display)); + matrix->cursor = &matrix->display[0][0]; + matrix->dirty = true; +} + +void iota_gfx_clear_screen(void) { + matrix_clear(&display); +} + +static void matrix_render(struct CharacterMatrix *matrix) { + last_flush = timer_read(); + iota_gfx_on(); +#if DEBUG_TO_SCREEN + ++displaying; +#endif + + // Move to the home position + send_cmd3(PageAddr, 0, MatrixRows - 1); + send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1); + + if (i2c_start_write(i2cAddress)) { + goto done; + } + if (i2c_master_write(0x40)) { + // Data mode + goto done; + } + + for (uint8_t row = 0; row < MatrixRows; ++row) { + for (uint8_t col = 0; col < MatrixCols; ++col) { + const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1)); + + for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) { + uint8_t colBits = pgm_read_byte(glyph + glyphCol); + i2c_master_write(colBits); + } + + // 1 column of space between chars (it's not included in the glyph) + i2c_master_write(0); + } + } + + matrix->dirty = false; + +done: + i2c_master_stop(); +#if DEBUG_TO_SCREEN + --displaying; +#endif +} + +void iota_gfx_flush(void) { + matrix_render(&display); +} + +static void matrix_update(struct CharacterMatrix *dest, + const struct CharacterMatrix *source) { + if (memcmp(dest->display, source->display, sizeof(dest->display))) { + memcpy(dest->display, source->display, sizeof(dest->display)); + dest->dirty = true; + } +} + +static void render_status_info(void) { +#if DEBUG_TO_SCREEN + if (debug_enable) { + return; + } +#endif + + struct CharacterMatrix matrix; + + matrix_clear(&matrix); + matrix_write_P(&matrix, PSTR("USB: ")); +#ifdef PROTOCOL_LUFA + switch (USB_DeviceState) { + case DEVICE_STATE_Unattached: + matrix_write_P(&matrix, PSTR("Unattached")); + break; + case DEVICE_STATE_Suspended: + matrix_write_P(&matrix, PSTR("Suspended")); + break; + case DEVICE_STATE_Configured: + matrix_write_P(&matrix, PSTR("Connected")); + break; + case DEVICE_STATE_Powered: + matrix_write_P(&matrix, PSTR("Powered")); + break; + case DEVICE_STATE_Default: + matrix_write_P(&matrix, PSTR("Default")); + break; + case DEVICE_STATE_Addressed: + matrix_write_P(&matrix, PSTR("Addressed")); + break; + default: + matrix_write_P(&matrix, PSTR("Invalid")); + } +#endif + +// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below + + char buf[40]; + snprintf(buf,sizeof(buf), "Undef-%ld", layer_state); + matrix_write_P(&matrix, PSTR("\n\nLayer: ")); + switch (layer_state) { + case _BASE: + matrix_write_P(&matrix, PSTR("Default")); + break; + case _RAISE: + matrix_write_P(&matrix, PSTR("Raise")); + break; + case _LOWER: + matrix_write_P(&matrix, PSTR("Lower")); + break; + case _ADJUST: + matrix_write_P(&matrix, PSTR("ADJUST")); + break; + default: + matrix_write(&matrix, buf); + } + + // Host Keyboard LED Status + char led[40]; + snprintf(led, sizeof(led), "\n%s %s %s", + (host_keyboard_leds() & (1< ScreenOffInterval) { + iota_gfx_off(); + } +} +#endif diff --git a/keyboards/orthodox/ssd1306.h b/keyboards/orthodox/ssd1306.h new file mode 100644 index 0000000000..b0c74f987e --- /dev/null +++ b/keyboards/orthodox/ssd1306.h @@ -0,0 +1,17 @@ +#ifndef SSD1306_H +#define SSD1306_H + +#include +#include + +bool iota_gfx_init(void); +void iota_gfx_task(void); +bool iota_gfx_off(void); +bool iota_gfx_on(void); +void iota_gfx_flush(void); +void iota_gfx_write_char(uint8_t c); +void iota_gfx_write(const char *data); +void iota_gfx_write_P(const char *data); +void iota_gfx_clear_screen(void); + +#endif -- cgit v1.2.3 From 42e6ecc36b65ad0f0d29c6c35c93b95078c11a1a Mon Sep 17 00:00:00 2001 From: Ethan Madden Date: Sun, 25 Jun 2017 18:30:40 -0700 Subject: Whitefox LED control (#1432) * use new grave_esc functionality * Port LED control from Ergodox Infinity to Whitefox --- keyboards/ergodox/infinity/config.h | 5 + keyboards/whitefox/animations.c | 128 ++++++++ keyboards/whitefox/animations.h | 30 ++ keyboards/whitefox/config.h | 14 + .../drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h | 109 +++++++ .../whitefox/drivers/gdisp/IS31FL3731C/driver.mk | 2 + .../drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c | 312 +++++++++++++++++++ .../drivers/gdisp/IS31FL3731C/gdisp_lld_config.h | 36 +++ keyboards/whitefox/gfxconf.h | 329 +++++++++++++++++++++ keyboards/whitefox/halconf.h | 2 +- keyboards/whitefox/keymaps/jetpacktuxedo/Makefile | 5 + keyboards/whitefox/keymaps/jetpacktuxedo/keymap.c | 14 +- keyboards/whitefox/rules.mk | 7 +- keyboards/whitefox/visualizer.c | 60 ++++ 14 files changed, 1044 insertions(+), 9 deletions(-) create mode 100644 keyboards/whitefox/animations.c create mode 100644 keyboards/whitefox/animations.h create mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h create mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk create mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c create mode 100644 keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h create mode 100644 keyboards/whitefox/gfxconf.h create mode 100644 keyboards/whitefox/keymaps/jetpacktuxedo/Makefile create mode 100644 keyboards/whitefox/visualizer.c (limited to 'keyboards') diff --git a/keyboards/ergodox/infinity/config.h b/keyboards/ergodox/infinity/config.h index 95f713819e..25cc8af0fc 100644 --- a/keyboards/ergodox/infinity/config.h +++ b/keyboards/ergodox/infinity/config.h @@ -56,6 +56,11 @@ along with this program. If not, see . #define VISUALIZER_USER_DATA_SIZE 16 +#define LCD_DISPLAY_NUMBER 0 +#define LED_DISPLAY_NUMBER 1 + +#define LED_NUM_ROWS 7 +#define LED_NUM_COLS 7 /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/whitefox/animations.c b/keyboards/whitefox/animations.c new file mode 100644 index 0000000000..ed1d75efb8 --- /dev/null +++ b/keyboards/whitefox/animations.c @@ -0,0 +1,128 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#if defined(VISUALIZER_ENABLE) + +#include "animations.h" +#include "visualizer.h" + +#ifdef BACKLIGHT_ENABLE +#include "led_keyframes.h" +#endif + +#include "visualizer_keyframes.h" + + +#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) + +static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { +#ifdef BACKLIGHT_ENABLE + led_keyframe_enable(animation, state); +#endif + return false; +} + +static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { +#ifdef BACKLIGHT_ENABLE + led_keyframe_disable(animation, state); +#endif + return false; +} + +static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { + bool ret = false; +#ifdef BACKLIGHT_ENABLE + ret |= led_keyframe_fade_in_all(animation, state); +#endif + return ret; +} + +static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { + bool ret = false; +#ifdef BACKLIGHT_ENABLE + ret |= led_keyframe_fade_out_all(animation, state); +#endif + return ret; +} + + +// Don't worry, if the startup animation is long, you can use the keyboard like normal +// during that time +keyframe_animation_t default_startup_animation = { + .num_frames = 2, + .loop = false, + .frame_lengths = {0, gfxMillisecondsToTicks(5000)}, + .frame_functions = { + keyframe_enable, + keyframe_fade_in, + }, +}; + +keyframe_animation_t default_suspend_animation = { + .num_frames = 2, + .loop = false, + .frame_lengths = {gfxMillisecondsToTicks(1000), 0}, + .frame_functions = { + keyframe_fade_out, + keyframe_disable, + }, +}; +#endif + +#if defined(BACKLIGHT_ENABLE) +#define CROSSFADE_TIME 1000 +#define GRADIENT_TIME 3000 + +keyframe_animation_t led_test_animation = { + .num_frames = 14, + .loop = true, + .frame_lengths = { + gfxMillisecondsToTicks(1000), // fade in + gfxMillisecondsToTicks(1000), // no op (leds on) + gfxMillisecondsToTicks(1000), // fade out + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // mirror leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // normal leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + + }, + .frame_functions = { + led_keyframe_fade_in_all, + keyframe_no_operation, + led_keyframe_fade_out_all, + led_keyframe_crossfade, + led_keyframe_left_to_right_gradient, + led_keyframe_crossfade, + led_keyframe_top_to_bottom_gradient, + led_keyframe_mirror_orientation, + led_keyframe_crossfade, + led_keyframe_left_to_right_gradient, + led_keyframe_crossfade, + led_keyframe_top_to_bottom_gradient, + led_keyframe_normal_orientation, + led_keyframe_crossfade, + }, +}; +#endif + +#endif diff --git a/keyboards/whitefox/animations.h b/keyboards/whitefox/animations.h new file mode 100644 index 0000000000..6d8b9830d9 --- /dev/null +++ b/keyboards/whitefox/animations.h @@ -0,0 +1,30 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ +#define KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ + +#include "visualizer.h" + +// You can use these default animations, but of course you can also write your own custom ones instead +extern keyframe_animation_t default_startup_animation; +extern keyframe_animation_t default_suspend_animation; + +// An animation for testing and demonstrating the led support, should probably not be used for real world +// cases +extern keyframe_animation_t led_test_animation; + +#endif /* KEYBOARDS_ERGODOX_INFINITY_ANIMATIONS_H_ */ diff --git a/keyboards/whitefox/config.h b/keyboards/whitefox/config.h index b7116341ff..08de9b9aa8 100644 --- a/keyboards/whitefox/config.h +++ b/keyboards/whitefox/config.h @@ -35,6 +35,12 @@ along with this program. If not, see . #define MATRIX_ROWS 9 #define MATRIX_COLS 8 +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 + +#define LED_BRIGHTNESS_LO 100 +#define LED_BRIGHTNESS_HI 255 + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST @@ -76,3 +82,11 @@ along with this program. If not, see . //#define NO_ACTION_FUNCTION #endif + +// The visualizer needs gfx thread priorities +#define LED_DISPLAY_NUMBER 0 + +#define LED_NUM_ROWS 5 +#define LED_NUM_COLS 16 + +#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h new file mode 100644 index 0000000000..3dc5327a58 --- /dev/null +++ b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h @@ -0,0 +1,109 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +#define GDISP_SCREEN_WIDTH 16 +#define GDISP_SCREEN_HEIGHT 5 + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0xFF, 0x00, /* C5-1 -> C5-16 */ + 0xFF, 0x00, /* C6-1 -> C6-16 */ + 0xFF, 0x00, /* C7-1 -> C7-16 */ + 0xFF, 0x00, /* C8-1 -> C8-16 */ + 0xFE, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + { LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)}, +// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 + { LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)}, +// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 + { LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)}, +// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 + { LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)}, +// 62 63 64 65 66 67 68 69 70 71 + { LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)}, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk new file mode 100644 index 0000000000..f32d0d8685 --- /dev/null +++ b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/IS31FL3731C +GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c new file mode 100644 index 0000000000..c807cbd1e2 --- /dev/null +++ b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c @@ -0,0 +1,312 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_WHITEFOX +#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_IS31FL3731C.h" + + +// Can't include led_tables from here +extern const uint8_t CIE1931_CURVE[]; + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 9 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 16 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 0 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#define IS31_ADDR_DEFAULT 0x74 + +#define IS31_REG_CONFIG 0x00 +// bits in reg +#define IS31_REG_CONFIG_PICTUREMODE 0x00 +#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 +#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 +// D2:D0 bits are starting frame for autoplay mode + +#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode + +#define IS31_REG_AUTOPLAYCTRL1 0x02 +// D6:D4 number of loops (000=infty) +// D2:D0 number of frames to be used + +#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) + +#define IS31_REG_DISPLAYOPT 0x05 +#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames +#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 +// D2:D0 bits blink period time (*0.27s) + +#define IS31_REG_AUDIOSYNC 0x06 +#define IS31_REG_AUDIOSYNC_ENABLE 0x1 + +#define IS31_REG_FRAMESTATE 0x07 + +#define IS31_REG_BREATHCTRL1 0x08 +// D6:D4 fade out time (26ms*2^i) +// D2:D0 fade in time (26ms*2^i) + +#define IS31_REG_BREATHCTRL2 0x09 +#define IS31_REG_BREATHCTRL2_ENABLE 0x10 +// D2:D0 extinguish time (3.5ms*2^i) + +#define IS31_REG_SHUTDOWN 0x0A +#define IS31_REG_SHUTDOWN_OFF 0x0 +#define IS31_REG_SHUTDOWN_ON 0x1 + +#define IS31_REG_AGCCTRL 0x0B +#define IS31_REG_ADCRATE 0x0C + +#define IS31_COMMANDREGISTER 0xFD +#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define IS31_FUNCTIONREG_SIZE 0xD + +#define IS31_FRAME_SIZE 0xB4 + +#define IS31_PWM_REG 0x24 +#define IS31_PWM_SIZE 0x90 + +#define IS31_LED_MASK_SIZE 0x12 +#define IS31_SCREEN_WIDTH 16 + +#define IS31 + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + uint8_t write_buffer_offset; + uint8_t write_buffer[IS31_FRAME_SIZE]; + uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; + uint8_t page; +}__attribute__((__packed__)) PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +static GFXINLINE void write_page(GDisplay* g, uint8_t page) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = IS31_COMMANDREGISTER; + tx[1] = page; + write_data(g, tx, 2); +} + +static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = reg; + tx[1] = data; + write_page(g, page); + write_data(g, tx, 2); +} + +static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { + PRIV(g)->write_buffer_offset = offset; + write_page(g, page); + write_data(g, (uint8_t*)PRIV(g), length + 1); +} + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + __builtin_memset(PRIV(g), 0, sizeof(PrivData)); + PRIV(g)->page = 0; + + // Initialise the board interface + init_board(g); + gfxSleepMilliseconds(10); + + // zero function page, all registers (assuming full_page is all zeroes) + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + set_hardware_shutdown(g, false); + gfxSleepMilliseconds(10); + // software shutdown + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + // zero function page, all registers + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + gfxSleepMilliseconds(10); + + + // zero all LED registers on all 8 pages, and enable the mask + __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); + for(uint8_t i=0; i<8; i++) { + write_ram(g, i, 0, IS31_FRAME_SIZE); + gfxSleepMilliseconds(1); + } + + // software shutdown disable (i.e. turn stuff on) + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + + // Finish Init + post_init_board(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOff; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + PRIV(g)->page++; + PRIV(g)->page %= 2; + // TODO: some smarter algorithm for this + // We should run only one physical page at a time + // This way we don't need to send so much data, and + // we could use slightly less memory + uint8_t* src = PRIV(g)->frame_buffer; + for (int y=0;yg.Backlight / 100; + PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val]; + ++src; + } + } + write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); + gfxSleepMilliseconds(1); + write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + break; + case powerOn: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_BACKLIGHT: + if (g->g.Backlight == (unsigned)g->p.ptr) + return; + unsigned val = (unsigned)g->p.ptr; + g->g.Backlight = val > 100 ? 100 : val; + g->flags |= GDISP_FLG_NEEDFLUSH; + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h new file mode 100644 index 0000000000..bb28ad775e --- /dev/null +++ b/keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h @@ -0,0 +1,36 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h new file mode 100644 index 0000000000..890317a0f4 --- /dev/null +++ b/keyboards/whitefox/gfxconf.h @@ -0,0 +1,329 @@ +/** + * This file has a different license to the rest of the uGFX system. + * You can copy, modify and distribute this file as you see fit. + * You do not need to publish your source modifications to this file. + * The only thing you are not permitted to do is to relicense it + * under a different license. + */ + +/** + * Copy this file into your project directory and rename it as gfxconf.h + * Edit your copy to turn on the uGFX features you want to use. + * The values below are the defaults. + * + * Only remove the comments from lines where you want to change the + * default value. This allows definitions to be included from + * driver makefiles when required and provides the best future + * compatibility for your project. + * + * Please use spaces instead of tabs in this file. + */ + +#ifndef _GFXCONF_H +#define _GFXCONF_H + + +/////////////////////////////////////////////////////////////////////////// +// GOS - One of these must be defined, preferably in your Makefile // +/////////////////////////////////////////////////////////////////////////// +//#define GFX_USE_OS_CHIBIOS TRUE +//#define GFX_USE_OS_FREERTOS FALSE +// #define GFX_FREERTOS_USE_TRACE FALSE +//#define GFX_USE_OS_WIN32 FALSE +//#define GFX_USE_OS_LINUX FALSE +//#define GFX_USE_OS_OSX FALSE +//#define GFX_USE_OS_ECOS FALSE +//#define GFX_USE_OS_RAWRTOS FALSE +//#define GFX_USE_OS_ARDUINO FALSE +//#define GFX_USE_OS_KEIL FALSE +//#define GFX_USE_OS_CMSIS FALSE +//#define GFX_USE_OS_RAW32 FALSE +// #define INTERRUPTS_OFF() optional_code +// #define INTERRUPTS_ON() optional_code +// These are not defined by default for some reason +#define GOS_NEED_X_THREADS FALSE +#define GOS_NEED_X_HEAP FALSE + +// Options that (should where relevant) apply to all operating systems + #define GFX_NO_INLINE FALSE +// #define GFX_COMPILER GFX_COMPILER_UNKNOWN +// #define GFX_CPU GFX_CPU_UNKNOWN +// #define GFX_OS_HEAP_SIZE 0 +// #define GFX_OS_NO_INIT FALSE +// #define GFX_OS_INIT_NO_WARNING FALSE +// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine +// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine +// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine + + +/////////////////////////////////////////////////////////////////////////// +// GDISP // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GDISP TRUE + +//#define GDISP_NEED_AUTOFLUSH FALSE +//#define GDISP_NEED_TIMERFLUSH FALSE +//#define GDISP_NEED_VALIDATION TRUE +//#define GDISP_NEED_CLIP TRUE +#define GDISP_NEED_CIRCLE TRUE +#define GDISP_NEED_ELLIPSE TRUE +#define GDISP_NEED_ARC TRUE +#define GDISP_NEED_ARCSECTORS TRUE +#define GDISP_NEED_CONVEX_POLYGON TRUE +//#define GDISP_NEED_SCROLL FALSE +#define GDISP_NEED_PIXELREAD TRUE +#define GDISP_NEED_CONTROL TRUE +//#define GDISP_NEED_QUERY FALSE +//#define GDISP_NEED_MULTITHREAD FALSE +//#define GDISP_NEED_STREAMING FALSE +#define GDISP_NEED_TEXT TRUE +// #define GDISP_NEED_TEXT_WORDWRAP FALSE +// #define GDISP_NEED_ANTIALIAS FALSE +// #define GDISP_NEED_UTF8 FALSE + #define GDISP_NEED_TEXT_KERNING TRUE +// #define GDISP_INCLUDE_FONT_UI1 FALSE +// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. +// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE + #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE +// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE +// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE + #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE +// #define GDISP_INCLUDE_USER_FONTS FALSE + +//#define GDISP_NEED_IMAGE FALSE +// #define GDISP_NEED_IMAGE_NATIVE FALSE +// #define GDISP_NEED_IMAGE_GIF FALSE +// #define GDISP_NEED_IMAGE_BMP FALSE +// #define GDISP_NEED_IMAGE_BMP_1 FALSE +// #define GDISP_NEED_IMAGE_BMP_4 FALSE +// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_8 FALSE +// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_16 FALSE +// #define GDISP_NEED_IMAGE_BMP_24 FALSE +// #define GDISP_NEED_IMAGE_BMP_32 FALSE +// #define GDISP_NEED_IMAGE_JPG FALSE +// #define GDISP_NEED_IMAGE_PNG FALSE +// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE +#ifdef EMULATOR +#define GDISP_NEED_PIXMAP TRUE +#endif +// #define GDISP_NEED_PIXMAP_IMAGE FALSE + +//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. +//#define GDISP_LINEBUF_SIZE 128 +//#define GDISP_STARTUP_COLOR Black +#define GDISP_NEED_STARTUP_LOGO FALSE + +//#define GDISP_TOTAL_DISPLAYS 2 + +#ifndef EMULATOR +#define GDISP_DRIVER_LIST GDISPVMT_IS31FL3731C_WHITEFOX +#endif + + #ifdef GDISP_DRIVER_LIST + // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability + #define GDISP_HARDWARE_STREAM_WRITE FALSE + #define GDISP_HARDWARE_STREAM_READ FALSE + #define GDISP_HARDWARE_STREAM_POS FALSE + #define GDISP_HARDWARE_DRAWPIXEL TRUE + #define GDISP_HARDWARE_CLEARS FALSE + #define GDISP_HARDWARE_FILLS FALSE + //#define GDISP_HARDWARE_BITFILLS FALSE + #define GDISP_HARDWARE_SCROLL FALSE + #define GDISP_HARDWARE_PIXELREAD TRUE + #define GDISP_HARDWARE_CONTROL TRUE + #define GDISP_HARDWARE_QUERY FALSE + #define GDISP_HARDWARE_CLIP FALSE + + #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 + #endif + +// The custom format is not defined for some reason, so define it as error +// so we don't get compiler warnings +#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR + +#define GDISP_USE_GFXNET FALSE +// #define GDISP_GFXNET_PORT 13001 +// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE +// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE +// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GWIN // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GWIN FALSE + +//#define GWIN_NEED_WINDOWMANAGER FALSE +// #define GWIN_REDRAW_IMMEDIATE FALSE +// #define GWIN_REDRAW_SINGLEOP FALSE +// #define GWIN_NEED_FLASHING FALSE +// #define GWIN_FLASHING_PERIOD 250 + +//#define GWIN_NEED_CONSOLE FALSE +// #define GWIN_CONSOLE_USE_HISTORY FALSE +// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE +// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE +// #define GWIN_CONSOLE_ESCSEQ FALSE +// #define GWIN_CONSOLE_USE_BASESTREAM FALSE +// #define GWIN_CONSOLE_USE_FLOAT FALSE +//#define GWIN_NEED_GRAPH FALSE +//#define GWIN_NEED_GL3D FALSE + +//#define GWIN_NEED_WIDGET FALSE +//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 +// #define GWIN_NEED_LABEL FALSE +// #define GWIN_LABEL_ATTRIBUTE FALSE +// #define GWIN_NEED_BUTTON FALSE +// #define GWIN_BUTTON_LAZY_RELEASE FALSE +// #define GWIN_NEED_SLIDER FALSE +// #define GWIN_SLIDER_NOSNAP FALSE +// #define GWIN_SLIDER_DEAD_BAND 5 +// #define GWIN_SLIDER_TOGGLE_INC 20 +// #define GWIN_NEED_CHECKBOX FALSE +// #define GWIN_NEED_IMAGE FALSE +// #define GWIN_NEED_IMAGE_ANIMATION FALSE +// #define GWIN_NEED_RADIO FALSE +// #define GWIN_NEED_LIST FALSE +// #define GWIN_NEED_LIST_IMAGES FALSE +// #define GWIN_NEED_PROGRESSBAR FALSE +// #define GWIN_PROGRESSBAR_AUTO FALSE +// #define GWIN_NEED_KEYBOARD FALSE +// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 +// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE +// #define GWIN_NEED_TEXTEDIT FALSE +// #define GWIN_FLAT_STYLING FALSE +// #define GWIN_WIDGET_TAGS FALSE + +//#define GWIN_NEED_CONTAINERS FALSE +// #define GWIN_NEED_CONTAINER FALSE +// #define GWIN_NEED_FRAME FALSE +// #define GWIN_NEED_TABSET FALSE +// #define GWIN_TABSET_TABHEIGHT 18 + + +/////////////////////////////////////////////////////////////////////////// +// GEVENT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GEVENT TRUE + +//#define GEVENT_ASSERT_NO_RESOURCE FALSE +//#define GEVENT_MAXIMUM_SIZE 32 +//#define GEVENT_MAX_SOURCE_LISTENERS 32 + + +/////////////////////////////////////////////////////////////////////////// +// GTIMER // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GTIMER FALSE + +//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY +//#define GTIMER_THREAD_WORKAREA_SIZE 2048 + + +/////////////////////////////////////////////////////////////////////////// +// GQUEUE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GQUEUE FALSE + +//#define GQUEUE_NEED_ASYNC FALSE +//#define GQUEUE_NEED_GSYNC FALSE +//#define GQUEUE_NEED_FSYNC FALSE +//#define GQUEUE_NEED_BUFFERS FALSE + +/////////////////////////////////////////////////////////////////////////// +// GINPUT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GINPUT FALSE + +//#define GINPUT_NEED_MOUSE FALSE +// #define GINPUT_TOUCH_STARTRAW FALSE +// #define GINPUT_TOUCH_NOTOUCH FALSE +// #define GINPUT_TOUCH_NOCALIBRATE FALSE +// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE +// #define GINPUT_MOUSE_POLL_PERIOD 25 +// #define GINPUT_MOUSE_CLICK_TIME 300 +// #define GINPUT_TOUCH_CXTCLICK_TIME 700 +// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE +// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE +// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 +//#define GINPUT_NEED_KEYBOARD FALSE +// #define GINPUT_KEYBOARD_POLL_PERIOD 200 +// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 +// #define GKEYBOARD_LAYOUT_OFF FALSE +// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE +//#define GINPUT_NEED_TOGGLE FALSE +//#define GINPUT_NEED_DIAL FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GFILE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GFILE FALSE + +//#define GFILE_NEED_PRINTG FALSE +//#define GFILE_NEED_SCANG FALSE +//#define GFILE_NEED_STRINGS FALSE +//#define GFILE_NEED_FILELISTS FALSE +//#define GFILE_NEED_STDIO FALSE +//#define GFILE_NEED_NOAUTOMOUNT FALSE +//#define GFILE_NEED_NOAUTOSYNC FALSE + +//#define GFILE_NEED_MEMFS FALSE +//#define GFILE_NEED_ROMFS FALSE +//#define GFILE_NEED_RAMFS FALSE +//#define GFILE_NEED_FATFS FALSE +//#define GFILE_NEED_NATIVEFS FALSE +//#define GFILE_NEED_CHBIOSFS FALSE + +//#define GFILE_ALLOW_FLOATS FALSE +//#define GFILE_ALLOW_DEVICESPECIFIC FALSE +//#define GFILE_MAX_GFILES 3 + +/////////////////////////////////////////////////////////////////////////// +// GADC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GADC FALSE + +//#define GADC_MAX_LOWSPEED_DEVICES 4 + + +/////////////////////////////////////////////////////////////////////////// +// GAUDIO // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GAUDIO FALSE +// There seems to be a bug in the ugfx code, the wrong define is used +// So define it in order to avoid warnings +#define GFX_USE_GAUDIN GFX_USE_GAUDIO +// #define GAUDIO_NEED_PLAY FALSE +// #define GAUDIO_NEED_RECORD FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GMISC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GMISC TRUE + +//#define GMISC_NEED_ARRAYOPS FALSE +//#define GMISC_NEED_FASTTRIG FALSE +//#define GMISC_NEED_FIXEDTRIG FALSE +//#define GMISC_NEED_INVSQRT FALSE +// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE +// #define GMISC_INVSQRT_REAL_SLOW FALSE +#define GMISC_NEED_MATRIXFLOAT2D TRUE +#define GMISC_NEED_MATRIXFIXED2D FALSE + +#endif /* _GFXCONF_H */ diff --git a/keyboards/whitefox/halconf.h b/keyboards/whitefox/halconf.h index 46b37a4f46..b380315298 100644 --- a/keyboards/whitefox/halconf.h +++ b/keyboards/whitefox/halconf.h @@ -76,7 +76,7 @@ * @brief Enables the I2C subsystem. */ #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE +#define HAL_USE_I2C TRUE #endif /** diff --git a/keyboards/whitefox/keymaps/jetpacktuxedo/Makefile b/keyboards/whitefox/keymaps/jetpacktuxedo/Makefile new file mode 100644 index 0000000000..8eb483103c --- /dev/null +++ b/keyboards/whitefox/keymaps/jetpacktuxedo/Makefile @@ -0,0 +1,5 @@ +ifndef QUANTUM_DIR + include ../../../Makefile +endif + +BACKLIGHT_ENABLE = yes diff --git a/keyboards/whitefox/keymaps/jetpacktuxedo/keymap.c b/keyboards/whitefox/keymaps/jetpacktuxedo/keymap.c index 09f6ca34df..82de171733 100644 --- a/keyboards/whitefox/keymaps/jetpacktuxedo/keymap.c +++ b/keyboards/whitefox/keymaps/jetpacktuxedo/keymap.c @@ -31,11 +31,11 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `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ayer 1: FN Layer * ,---------------------------------------------------------------. @@ -52,8 +52,8 @@ const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [1] = KEYMAP( \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_TRNS,KC_MUTE,\ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, KC_TRNS,\ - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU,\ + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,BL_TOGG,KC_TRNS,KC_TRNS,BL_INC, KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS, KC_TRNS,\ + KC_TRNS,KC_TRNS,KC_TRNS,BL_DEC, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU,\ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP,KC_VOLD,\ KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_HOME,KC_PGDN,KC_END \ ), diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index 18b690f492..565381e16b 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -1,6 +1,7 @@ # project specific files SRC = matrix.c \ - led.c + led.c \ + animations.c ## chip/board settings # - the next two should match the directories in @@ -66,3 +67,7 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration #SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend NKRO_ENABLE ?= yes # USB Nkey Rollover CUSTOM_MATRIX ?= yes # Custom matrix file +BACKLIGHT_ENABLE ?= yes +VISUALIZER_ENABLE ?= yes + +include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk diff --git a/keyboards/whitefox/visualizer.c b/keyboards/whitefox/visualizer.c new file mode 100644 index 0000000000..167e0ec4de --- /dev/null +++ b/keyboards/whitefox/visualizer.c @@ -0,0 +1,60 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef KEYBOARDS_WHITEFOX_SIMPLE_VISUALIZER_H_ +#define KEYBOARDS_WHITEFOX_SIMPLE_VISUALIZER_H_ + +#include "visualizer.h" +#include "visualizer_keyframes.h" +#include "led.h" +#include "animations.h" + + +static bool initial_update = true; + +// Feel free to modify the animations below, or even add new ones if needed + +void initialize_user_visualizer(visualizer_state_t* state) { + // The brightness will be dynamically adjustable in the future + // But for now, change it here. + initial_update = true; + start_keyframe_animation(&default_startup_animation); +} + + +void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { + // Add more tests, change the colors and layer texts here + // Usually you want to check the high bits (higher layers first) + // because that's the order layers are processed for keypresses + // You can for check for example: + // state->status.layer + // state->status.default_layer + // state->status.leds (see led.h for available statuses) + + if (initial_update) { initial_update=false; start_keyframe_animation(&led_test_animation); } +} + + +void user_visualizer_suspend(visualizer_state_t* state) { + start_keyframe_animation(&default_suspend_animation); +} + +void user_visualizer_resume(visualizer_state_t* state) { + initial_update = true; + start_keyframe_animation(&default_startup_animation); +} + +#endif /* KEYBOARDS_WHITEFOX_SIMPLE_VISUALIZER_H_ */ -- cgit v1.2.3 From a25dbaad327f834dad6fb572b074bab7be1e1d0f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Lindh=C3=A9?= Date: Tue, 27 Jun 2017 14:58:38 +0200 Subject: Create sv_SE Qwerty layout for ErgoDox MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit *NOTE:* it might still be desirable to set the software layout to sv_SE in your OS. Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration I have tried making this as close of a match I could between the [default ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a standard Swedish Qwerty layout. Notable differences from default: ================================= * There are three special character buttons (acute accent, circumflex/tilde and apostrophe/asterisk) that don't have any buttons to map to naturally. I've put these at other places: * Acute accent (´) can be found in the lower left corner, conveniently placed to reach for making an é. * Apostrophe (') was put in the lower left corner, close to acute accent. * Circumflex (^) and asterisk (*) was placed in the lower right corner. * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left those out. I could only get the buttons to produce a single one of the characters. How can I get it to work properly? * The Alt button on right thumb was exchanged for AltGr (RAlt). * I changed the backslash in the numpad (layer 1) for a minus. Thought it was more sensible. * I didn't find a good place for the "<>|" button, so that one was left out. That is a problem that really needs to be resolved. Pipe can be found on layer one, however. --- keyboards/ergodox/keymaps/swedish/keymap.c | 247 ++++++++++++++++++++++++++++ keyboards/ergodox/keymaps/swedish/readme.md | 36 ++++ 2 files changed, 283 insertions(+) create mode 100644 keyboards/ergodox/keymaps/swedish/keymap.c create mode 100644 keyboards/ergodox/keymaps/swedish/readme.md (limited to 'keyboards') diff --git a/keyboards/ergodox/keymaps/swedish/keymap.c b/keyboards/ergodox/keymaps/swedish/keymap.c new file mode 100644 index 0000000000..c110538e6f --- /dev/null +++ b/keyboards/ergodox/keymaps/swedish/keymap.c @@ -0,0 +1,247 @@ +/* Copyright 2017 Andreas Lindhé + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" +#include "keymap_swedish.h" + +#define BASE 0 // default layer +#define SYMB 1 // symbols +#define MDIA 2 // media keys + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + EPRM, + VRSN, + RGB_SLD +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap 0: Basic layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | ½ | ! | " | # | # | % | LEFT | | RIGHT| & | / | ( | ) | = | ? | + * | § | 1 | 2 @ | 3 £ | 4 $ | 5 | | | | 6 | 7 { | 8 [ | 9 ] | 0 } | + \ | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | Delete | Q | W | E | R | T | L1 | | L1 | Y | U | I | O | P | Å | + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Caps | A | S | D | F | G |------| |------| H | J | K | L |Ö / L2|Ä / Cmd | + * | Lock | | | | | | Hyper| | Meh | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | Left |Z/Ctrl| X | C | V | B | | | | N | M | ; | : |_/Ctrl| RShift | + * | Shift | | | | | | | | | | | , | . |- | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | '/L1 | ` |AltShf| Left | Right| | Up | Down | ^ | * | ~L1 | + * | | ' | | | | | | | | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,---------------. + * | App | LGui | | AltGr|Ctrl/Esc| + * ,------|------|------| |------+--------+------. + * | | | Home | | PgUp | | | + * | Space|Back- |------| |------| Tab |Enter | + * | |space | End | | PgDn | | | + * `--------------------' `----------------------' + */ +// If it accepts an argument (i.e, is a function), it doesn't need KC_. +// Otherwise, it needs KC_* +[BASE] = KEYMAP( // layer 0 : default + // left hand + NO_HALF, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LEFT, + KC_DELT, KC_Q, KC_W, KC_E, KC_R, KC_T, TG(SYMB), + KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, CTL_T(KC_Z), KC_X, KC_C, KC_V, KC_B, ALL_T(KC_NO), + LT(SYMB,NO_APOS), NO_ACUT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, + ALT_T(KC_APP), KC_LGUI, + KC_HOME, + KC_SPC,KC_BSPC,KC_END, + // right hand + KC_RGHT, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, + TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AA, + KC_H, KC_J, KC_K, KC_L, LT(MDIA, NO_OSLH), GUI_T(NO_AE), + MEH_T(KC_NO), KC_N, KC_M, KC_COMM, KC_DOT, CTL_T(NO_MINS), KC_RSFT, + KC_UP, KC_DOWN, NO_CIRC, NO_ASTR, KC_FN1, + NO_ALGR, CTL_T(KC_ESC), + KC_PGUP, + KC_PGDN,KC_TAB, KC_ENT +), + +/* Keymap 1: Symbol Layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | # | $ | ( | ) | ` |------| |------| Down | 4 | 5 | 6 | + | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | % | ^ | [ | ] | ~ | | | | & | 1 | 2 | 3 | \ | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | | | | | . | 0 | = | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * |Animat| | |Toggle|Solid | + * ,------|------|------| |------+------+------. + * |Bright|Bright| | | |Hue- |Hue+ | + * |ness- |ness+ |------| |------| | | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// SYMBOLS +[SYMB] = KEYMAP( + // left hand + VRSN, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS,KC_EXLM,NO_AT, NO_LCBR,NO_RCBR,NO_PIPE,KC_TRNS, + KC_TRNS,KC_HASH,NO_DLR, NO_LPRN,NO_RPRN,NO_GRV, + KC_TRNS,KC_PERC,NO_CIRC,NO_LBRC,NO_RBRC,NO_TILD,KC_TRNS, + EPRM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + RGB_MOD,KC_TRNS, + KC_TRNS, + RGB_VAD,RGB_VAI,KC_TRNS, + // right hand + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, KC_UP, KC_7, KC_8, KC_9, NO_ASTR, KC_F12, + KC_DOWN, KC_4, KC_5, KC_6, NO_PLUS, KC_TRNS, + KC_TRNS, NO_AMPR, KC_1, KC_2, KC_3, NO_MINS, KC_TRNS, + KC_TRNS,KC_DOT, KC_0, NO_EQL, KC_TRNS, + RGB_TOG, RGB_SLD, + KC_TRNS, + KC_TRNS, RGB_HUD, RGB_HUI +), + +/* Keymap 2: Media and mouse keys + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | | | | MsUp | | | | | | | | | | | | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | |MsLeft|MsDown|MsRght| |------| |------| | | | | | Play | + * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| + * | | | | | | | | | | | | Prev | Next | | | + * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' + * | | | | Lclk | Rclk | |VolUp |VolDn | Mute | | | + * `----------------------------------' `----------------------------------' + * ,-------------. ,-------------. + * | | | | | | + * ,------|------|------| |------+------+------. + * | | | | | | |Brwser| + * | | |------| |------| |Back | + * | | | | | | | | + * `--------------------' `--------------------' + */ +// MEDIA AND MOUSE +[MDIA] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + // right hand + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_WBAK +), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + } + return MACRO_NONE; +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case EPRM: + if (record->event.pressed) { + eeconfig_init(); + } + return false; + break; + case VRSN: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + return false; + break; + case RGB_SLD: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_mode(1); + #endif + } + return false; + break; + } + return true; +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + +}; + + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + // TODO: Make this relevant to the ErgoDox EZ. + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + default: + // none + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/swedish/readme.md b/keyboards/ergodox/keymaps/swedish/readme.md new file mode 100644 index 0000000000..b5b859bce6 --- /dev/null +++ b/keyboards/ergodox/keymaps/swedish/readme.md @@ -0,0 +1,36 @@ +# Swedish (sv_SE) Qwerty layout for ErgoDox EZ, based on the Default configuration + +*NOTE:* it might still be desirable to set the software layout to sv_SE in your +OS. + +Remind me and I'll provide a picture of the layout. + +I have tried making this as close of a match I could between the [default +ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a +standard Swedish Qwerty layout. + +## Notable differences from default: + +* There are three special character buttons (acute accent, circumflex/tilde and + apostrophe/asterisk) that don't have any buttons to map to naturally. I've put + these at other places: + + * Acute accent (´) can be found in the lower left corner, conveniently + placed to reach for making an é. + + * Apostrophe (') was put in the lower left corner, close to acute accent. + + * Circumflex (^) and asterisk (*) was placed in the lower right corner. + + * Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left + those out. I could only get the buttons to produce a single one of the + characters. How can I get it to work properly? + +* The Alt button on right thumb was exchanged for AltGr (RAlt). + +* I changed the backslash in the numpad (layer 1) for a minus. Thought it was + more sensible. + +* I didn't find a good place for the "<>|" button, so that one was left out. + That is a problem that really needs to be resolved. Pipe can be found on layer + one, however. -- cgit v1.2.3