From 4cdb86c730528c8ca5ff90f5b9b01c395d31fc0e Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Tue, 14 May 2019 13:58:56 -0500 Subject: [Keyboard] Create RGBKB Folder (#5858) * Move Sol, Zen, & Zygomorph keyboards to RGBKB folder * Updated default keymaps * Fixing more areas due too folder moves * Fixing Zen layer numbers * Fixing zygomorph layer comments * Fixing Colmak comments * Fixing Sol Colmak readme * Macro alignment * Zen rev2 configuration json * Fixing sol ifdef * Fixing Sol info.json --- keyboards/zen/readme.md | 27 --------------------------- 1 file changed, 27 deletions(-) delete mode 100644 keyboards/zen/readme.md (limited to 'keyboards/zen/readme.md') diff --git a/keyboards/zen/readme.md b/keyboards/zen/readme.md deleted file mode 100644 index 7ca7c69fe5..0000000000 --- a/keyboards/zen/readme.md +++ /dev/null @@ -1,27 +0,0 @@ -# Zen Keyboard - -A split ergo keyboard with a few goals in mind: - -- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick *including switches and caps* when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps. -- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing. -- Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright -- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume. -- Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the [QMK Proton-C](https://olkb.com/parts/qmk-proton-c) and the [Keeb.io Elite-C](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4) - -Keyboard Maintainer: [Legonut](https://github.com/Legonut) -Hardware Supported: Zen rev1, Zen rev2 -Hardware Availability: [RGBKB.net](https://www.rgbkb.net/) - -A build guide and more info for this keyboard can be found here: [Zen Build Guide](https://rgbkb.gitbook.io/sol-build-guide/zygomorph-build-guide/untitled). - -Make example for this keyboard (after setting up your build environment): - - make zen/rev2:default - -To build for a Proton-C: - - make zen/rev2:default CTPC=yes - -**Note:** The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes. - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. -- cgit v1.2.3