From ddcb1794fa83e62e5e48536f4bc02ada63da411a Mon Sep 17 00:00:00 2001
From: Joel Challis <git@zvecr.com>
Date: Tue, 17 Nov 2020 17:06:30 +0000
Subject: Refactor to use led config - Part 1 (#10905)

* Refactor to use led config

* Refactor to use led config

* Refactor to use led config

* Refactor to use led config

* Refactor to use led config
---
 keyboards/yd68/config.h |  3 +++
 keyboards/yd68/yd68.c   | 57 +++++++++----------------------------------------
 2 files changed, 13 insertions(+), 47 deletions(-)

(limited to 'keyboards/yd68')

diff --git a/keyboards/yd68/config.h b/keyboards/yd68/config.h
index 17461c5dc3..7b4a43bfde 100644
--- a/keyboards/yd68/config.h
+++ b/keyboards/yd68/config.h
@@ -48,6 +48,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN D4
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
diff --git a/keyboards/yd68/yd68.c b/keyboards/yd68/yd68.c
index f34661dd37..22f75f7f81 100644
--- a/keyboards/yd68/yd68.c
+++ b/keyboards/yd68/yd68.c
@@ -15,59 +15,22 @@
  */
 #include "yd68.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	
-	//Capslock LED Output Low
-	DDRD |= (1<<4);
-    PORTD &= ~(1<<4);
-	
+void keyboard_pre_init_kb(void) {
 	//Backlight LEDs Output Low
-	DDRD |= (1<<6);
-    PORTD &= ~(1<<6);
+	setPinOutput(D6);
+	writePinLow(D6);
 	
 	//RGB power output low
-	DDRE |= (1<<2);
-    PORTE &= ~(1<<2);
+	setPinOutput(E2);
+	writePinLow(E2);
 	
 	//Bluetooth power output high
-	DDRB |= (1<<2);
-    PORTB |= (1<<2);
+	setPinOutput(B2);
+	writePinLow(B2);
 	
 	//RGB data output low
-	DDRB |= (1<<3);
-	PORTB &= ~(1<<3);
-	
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	setPinOutput(B3);
+	writePinLow(B3);
 	
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output low
-        DDRD |= (1<<4);
-        PORTD &= ~(1<<4);
-    } else {
-        // output high
-        DDRD |= (1<<4);
-        PORTD |= (1<<4);
-    }
-
-	led_set_user(usb_led);
+	keyboard_pre_init_user();
 }
-- 
cgit v1.2.3