From 57f5cd3ca7903a8736f79d3d08a7dc6dc75793b3 Mon Sep 17 00:00:00 2001 From: Kenneth Aloysius Date: Tue, 21 May 2019 05:43:29 +0700 Subject: [Keyboard] YD60MQ support (#5911) * Keep ASCII art consistent with keymap * Possible fix for xyverz ortho keymap: define RGBLED_NUM * Update DZ60 keymap; TODO store old keymap under different directory? * Change RGUI to RALT because 7u spacebar is too long * Save old bottom row keymap * Update Iris keymap: replace backslash with grv * Add ortho_4x12 layout * Added Delete key to Iris keymap * Move delete key * Oh look a new keyboard * ortho4x12: get an adjust layer back * Remove jj40 keymap, add custom power draw #define * Set WhiteFox to advertise only 100mA of power draw * Update WhiteFox keymap * Update WF keymap (2) * Remove lets_split keymap, update community krusli keymap * Add #define for BACKLIGHT_LEVELS (unused) * Update Whitefox keymap * Add YD60 from auto-generated kbfirmware files * Bring files up to speed with new standards * Fix: KEYMAP -> LAYOUT * Fix keymap differences (DZ60 -> YD60) * Update keymap * Update README * Fix RShift position * Specify that the port is for the YD60MQ variant * Update keyboards/iris/keymaps/krusli/keymap.c Co-Authored-By: fauxpark * Fix Iris and Let's Split keymaps * Remove unused keymap file * Use #include QMK_KEYBOARD_H * Add atmel-dfu selection to yd60 * Rename dir to YD60MQ, update definitions * Use new convenience macros/functions for led_set_user * Use #pragma once * Change all ?= to = in rules.mk * Use pragma once for yd60mq.h * Take out DZ60 and Iris changes * Remove now-removed Iris folder * Revert adding ortho_4x12 * Revert on xyverz ortho_4x12 keymap * Undo deleting JJ40 keymap files * Don't revert beyond upstream jj40 state * Extra files from earlier commit is to be deleted * Remove WhiteFox keymap not in upstream yet * Re-add my Let's Split keymap * Revert keymap changes * Cleanup: indentation * Update keyboards/yd60mq/rules.mk Co-Authored-By: fauxpark * Update keyboards/yd60mq/rules.mk Co-Authored-By: fauxpark * Cleanup & move kb backlighting code to yd60mq.c * Update README, rename to lowercase * Update README: rename to lowercase * Update README with links and picture of PCB * Remove PREVENT_STUCK_MODIFIERS Co-Authored-By: Drashna Jaelre --- keyboards/yd60mq/rules.mk | 61 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 keyboards/yd60mq/rules.mk (limited to 'keyboards/yd60mq/rules.mk') diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk new file mode 100644 index 0000000000..2a89630116 --- /dev/null +++ b/keyboards/yd60mq/rules.mk @@ -0,0 +1,61 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes -- cgit v1.2.3