From dbdbbbd5c9b1458f682eec661d0a17f91dccb4dc Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 26 Sep 2018 12:17:54 -0700 Subject: Keyboard: Refactor XMMX keyboard to XMMX and Toad (#3955) * pull out toad keyboard and get it compiling * refactor xmmx * use the correct LAYOUT macros * move LED code out to toad.c file * move LED code out to xmmx.c file * adjust for correct number of columns and pins used * remove led set user --- keyboards/toad/config.h | 54 +++++++++++++++++++ keyboards/toad/keymaps/ansi_wk/keymap.c | 15 ++++++ keyboards/toad/keymaps/ansi_wkl/keymap.c | 13 +++++ keyboards/toad/keymaps/default/keymap.c | 13 +++++ keyboards/toad/keymaps/iso_wk/keymap.c | 13 +++++ keyboards/toad/keymaps/iso_wkl/keymap.c | 13 +++++ keyboards/toad/readme.md | 14 +++++ keyboards/toad/rules.mk | 56 ++++++++++++++++++++ keyboards/toad/toad.c | 18 +++++++ keyboards/toad/toad.h | 91 ++++++++++++++++++++++++++++++++ 10 files changed, 300 insertions(+) create mode 100644 keyboards/toad/config.h create mode 100644 keyboards/toad/keymaps/ansi_wk/keymap.c create mode 100644 keyboards/toad/keymaps/ansi_wkl/keymap.c create mode 100644 keyboards/toad/keymaps/default/keymap.c create mode 100644 keyboards/toad/keymaps/iso_wk/keymap.c create mode 100644 keyboards/toad/keymaps/iso_wkl/keymap.c create mode 100644 keyboards/toad/readme.md create mode 100644 keyboards/toad/rules.mk create mode 100644 keyboards/toad/toad.c create mode 100644 keyboards/toad/toad.h (limited to 'keyboards/toad') diff --git a/keyboards/toad/config.h b/keyboards/toad/config.h new file mode 100644 index 0000000000..f1d32c15b6 --- /dev/null +++ b/keyboards/toad/config.h @@ -0,0 +1,54 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6776 +#define DEVICE_VER 0x0001 +#define MANUFACTURER farmakon +#define PRODUCT "TOAD" +#define DESCRIPTION "TOAD" + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 14 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B0, F6, F5, F4, F1, F0 } +#define MATRIX_COL_PINS { B3, B2, B1, E6, B7, C7, C6, D4, D6, D7, B4, D0, D1, F7 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 0 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/toad/keymaps/ansi_wk/keymap.c b/keyboards/toad/keymaps/ansi_wk/keymap.c new file mode 100644 index 0000000000..a4fd348f0e --- /dev/null +++ b/keyboards/toad/keymaps/ansi_wk/keymap.c @@ -0,0 +1,15 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_ansi_wk( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL + ) +}; + + diff --git a/keyboards/toad/keymaps/ansi_wkl/keymap.c b/keyboards/toad/keymaps/ansi_wkl/keymap.c new file mode 100644 index 0000000000..7fb6b3b599 --- /dev/null +++ b/keyboards/toad/keymaps/ansi_wkl/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_ansi_wkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL + ) +}; diff --git a/keyboards/toad/keymaps/default/keymap.c b/keyboards/toad/keymaps/default/keymap.c new file mode 100644 index 0000000000..4c30bdc442 --- /dev/null +++ b/keyboards/toad/keymaps/default/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ) +}; diff --git a/keyboards/toad/keymaps/iso_wk/keymap.c b/keyboards/toad/keymaps/iso_wk/keymap.c new file mode 100644 index 0000000000..2025504321 --- /dev/null +++ b/keyboards/toad/keymaps/iso_wk/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_iso_wk( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL + ) +}; diff --git a/keyboards/toad/keymaps/iso_wkl/keymap.c b/keyboards/toad/keymaps/iso_wkl/keymap.c new file mode 100644 index 0000000000..1659d7b384 --- /dev/null +++ b/keyboards/toad/keymaps/iso_wkl/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT_iso_wkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL + ) +}; diff --git a/keyboards/toad/readme.md b/keyboards/toad/readme.md new file mode 100644 index 0000000000..3f3bff5b5b --- /dev/null +++ b/keyboards/toad/readme.md @@ -0,0 +1,14 @@ +# Toad + +Toad: 70% Mechanical Keyboard PCB. + +Toad schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/70_Keyboard-d4f6baf4792d4ada9c0571fa3713e461) + +For more informations on the Toad please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=91388.0) + +Make examples for these keyboards (after setting up your build environment): + + make toad:default + + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/toad/rules.mk b/keyboards/toad/rules.mk new file mode 100644 index 0000000000..ee87c6e8d4 --- /dev/null +++ b/keyboards/toad/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= no # Commands for debug and configuration +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +AUDIO_ENABLE ?= no +RGBLIGHT_ENABLE ?= no \ No newline at end of file diff --git a/keyboards/toad/toad.c b/keyboards/toad/toad.c new file mode 100644 index 0000000000..bc4db0339e --- /dev/null +++ b/keyboards/toad/toad.c @@ -0,0 +1,18 @@ +#include "toad.h" + +void led_set_user(uint8_t usb_led) { + + //LED1 + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRB |= (1 << 6); PORTB &= ~(1 << 6); + } else { + DDRB &= ~(1 << 6); PORTB &= ~(1 << 6); + } + + //LED2 + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + DDRB |= (1 << 5); PORTB &= ~(1 << 5); + } else { + DDRB &= ~(1 << 5); PORTB &= ~(1 << 5); + } +} diff --git a/keyboards/toad/toad.h b/keyboards/toad/toad.h new file mode 100644 index 0000000000..154068e42a --- /dev/null +++ b/keyboards/toad/toad.h @@ -0,0 +1,91 @@ +#ifndef TOAD +#define TOAD + +#include "quantum.h" + +// 70% keyboard: default - all keys +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ + K500, K501, K502, K507, K510, K511, K512, K513 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413 }, \ + { K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 } \ +} + +// 70% keyboard: ANSI Winkey +#define LAYOUT_ansi_wk( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \ + K500, K501, K502, K507, K510, K511, K512, K513 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \ + { K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \ + { K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 } \ +} + +// 70% keyboard: ANSI Winkeyless +#define LAYOUT_ansi_wkl( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \ + K500, K502, K507, K511, K513 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \ + { K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \ + { K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 } \ +} + +// 70% keyboard: ISO Winkey +#define LAYOUT_iso_wk( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \ + K500, K501, K502, K507, K510, K511, K512, K513 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \ + { K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 } \ +} + +// 70% keyboard: ISO Winkeyless +#define LAYOUT_iso_wkl( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \ + K500, K502, K507, K511, K513 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \ + { K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 } \ +} + +#endif -- cgit v1.2.3