From c289a4cb2044c618257ec1e426ccf9c6db8fbf66 Mon Sep 17 00:00:00 2001 From: Ethan Madden Date: Sun, 25 Aug 2019 08:43:47 -0700 Subject: RGB Inidcator example for new van pcbs (#6544) * RGB Inidcator example for new van pcbs * simplify config.h As per @drashna in CR --- keyboards/thevankeyboards/minivan/config.h | 90 +--------------------- .../minivan/keymaps/jetpacktuxedo/config.h | 7 +- .../minivan/keymaps/jetpacktuxedo/keymap.c | 53 ++++++++++++- .../minivan/keymaps/jetpacktuxedo/rules.mk | 2 +- keyboards/thevankeyboards/minivan/minivan.c | 27 ------- 5 files changed, 57 insertions(+), 122 deletions(-) (limited to 'keyboards/thevankeyboards/minivan') diff --git a/keyboards/thevankeyboards/minivan/config.h b/keyboards/thevankeyboards/minivan/config.h index 22fb377629..7bc8192ed3 100644 --- a/keyboards/thevankeyboards/minivan/config.h +++ b/keyboards/thevankeyboards/minivan/config.h @@ -66,91 +66,9 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION +/* RGB Setup */ +#define RGB_DI_PIN D0 +#define RGBLED_NUM 3 +#define RGBLIGHT_SLEEP #endif diff --git a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h index 5f5872becc..426b76b3b1 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h +++ b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/config.h @@ -1,7 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" +#pragma once #define PERMISSIVE_HOLD -#endif +#define RGBLIGHT_EFFECT_BREATHING diff --git a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c index 4c045ac0a5..f9bb64e05f 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c +++ b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/keymap.c @@ -11,13 +11,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT_arrow_command( /* LAYER 2 */ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, - KC_TRNS, KC_MINS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_QUOT, KC_TRNS, + KC_TRNS, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_QUOT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_PGUP, KC_BSLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END ), [2] = LAYOUT_arrow_command( /* LAYER 1 */ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, - KC_TRNS, KC_UNDS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_TRNS, + KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_DQUO, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_RCBR, KC_PGUP, KC_PIPE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END ), @@ -30,7 +30,54 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [4] = LAYOUT_arrow_command( /* Gaming Layer*/ KC_ESC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_U, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LT(5, KC_SLSH), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [5] = LAYOUT_arrow_command( /* RESET Layer*/ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) }; + +void keyboard_post_init_user(void) { + #ifdef RGBLIGHT_ENABLE + // Set up RGB effects on _only_ the third LED (index 2) + rgblight_set_effect_range(2, 1); + // Set LED effects to breathing mode in a tealish blue color + rgblight_sethsv_noeeprom(185, 255, 255); + rgblight_mode_noeeprom(RGBLIGHT_EFFECT_BREATHING + 2); + + // Init the first two LEDs to a static color + setrgb(0, 0, 0, (LED_TYPE *)&led[0]); + setrgb(0, 0, 0, (LED_TYPE *)&led[1]); + rgblight_set(); + #endif //RGBLIGHT_ENABLE +} + +uint32_t layer_state_set_user(uint32_t state){ + #ifdef RGBLIGHT_ENABLE + uint8_t led0r = 0; uint8_t led0g = 0; uint8_t led0b = 0; + uint8_t led1r = 0; uint8_t led1g = 0; uint8_t led1b = 0; + + if (layer_state_cmp(state, 1)) { + led0r = 255; + } + if (layer_state_cmp(state, 2)) { + led0g = 255; + } + + if (layer_state_cmp(state, 4)) { + led1b = 255; + } + if (layer_state_cmp(state, 5)) { + led1r = 255; + } + + setrgb(led0r, led0g, led0b, (LED_TYPE *)&led[0]); + setrgb(led1r, led1g, led1b, (LED_TYPE *)&led[1]); + rgblight_set(); + #endif //RGBLIGHT_ENABLE + return state; +} diff --git a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk index d7ca73ac58..4a27701076 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk +++ b/keyboards/thevankeyboards/minivan/keymaps/jetpacktuxedo/rules.mk @@ -13,5 +13,5 @@ MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/thevankeyboards/minivan/minivan.c b/keyboards/thevankeyboards/minivan/minivan.c index b260195cec..19996f9208 100644 --- a/keyboards/thevankeyboards/minivan/minivan.c +++ b/keyboards/thevankeyboards/minivan/minivan.c @@ -1,28 +1 @@ #include "minivan.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} -- cgit v1.2.3