From 4dddcb4f0300f79d8fbfc462ff8d6b360e99989e Mon Sep 17 00:00:00 2001 From: Ryan Date: Sun, 20 Jun 2021 12:03:11 +1000 Subject: Telophase cleanup (#13225) --- keyboards/telophase/config.h | 53 +++++++---- keyboards/telophase/keymaps/default/keymap.c | 134 +++++++++------------------ keyboards/telophase/matrix.c | 127 +++---------------------- keyboards/telophase/readme.md | 13 +-- keyboards/telophase/rules.mk | 39 ++++---- keyboards/telophase/telophase.c | 44 ++++++--- keyboards/telophase/telophase.h | 77 +++++++-------- 7 files changed, 177 insertions(+), 310 deletions(-) (limited to 'keyboards/telophase') diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h index c67dd939bf..51718da9d4 100644 --- a/keyboards/telophase/config.h +++ b/keyboards/telophase/config.h @@ -1,5 +1,5 @@ /* -Copyright 2012 Jun Wako +Copyright 2021 This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -15,31 +15,44 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" /* USB Device descriptor parameter */ - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0001 -#define MANUFACTURER unknown -#define PRODUCT Telophase +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER unknown +#define PRODUCT Telophase /* key matrix size */ #define MATRIX_ROWS 4 #define MATRIX_COLS 12 -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ -//#define BACKLIGHT_LEVELS 3 - #define ONESHOT_TIMEOUT 500 +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + /* * Feature disable options * These options are also useful to firmware size reduction. @@ -55,10 +68,12 @@ along with this program. If not, see . //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +// UART settings for communication with the RF microcontroller #define SERIAL_UART_BAUD 1000000 #define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) #define SERIAL_UART_INIT_CUSTOM \ @@ -66,5 +81,3 @@ along with this program. If not, see . UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ /* 8-bit data */ \ UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - -#endif diff --git a/keyboards/telophase/keymaps/default/keymap.c b/keyboards/telophase/keymaps/default/keymap.c index 9cc6c1bb00..163f754d43 100644 --- a/keyboards/telophase/keymaps/default/keymap.c +++ b/keyboards/telophase/keymaps/default/keymap.c @@ -1,99 +1,55 @@ -// this is the style you want to emulate. -// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +/* +Copyright 2021 -#include QMK_KEYBOARD_H +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -enum telophase_layers -{ - _QWERTY, - _LOWER, - _RAISE, - _ADJUST, -}; +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H -enum telophase_keycodes -{ - LOWER = SAFE_RANGE, - RAISE, - ADJUST +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST }; #define LONGPRESS_DELAY 150 #define LAYER_TOGGLE_DELAY 300 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_QWERTY] = { /*QWERTY*/ - {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, - {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, - {KC_LCTL, KC_LGUI, KC_LALT, ADJUST, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT } -}, - - -[_LOWER] = { /*Lower*/ - {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, - {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE }, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______ }, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY } -}, - - - -[_RAISE] = { /*Raise*/ - {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, - {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS }, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______ }, - {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY } - -}, - - -[_ADJUST] = { /*Adjust*/ - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, - {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ } - -}, -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - } else { - layer_off(_LOWER); - } - return false; - break; - - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - } else { - layer_off(_RAISE); - } - return false; - break; - - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - - } - return true; -} - -void matrix_scan_user(void) { - return; + [_QWERTY] = LAYOUT_ortho_4x12( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_LCTL, KC_LGUI, KC_LALT, MO(_ADJUST), MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ), + [_LOWER] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + [_RAISE] = LAYOUT_ortho_4x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + [_ADJUST] = LAYOUT_ortho_4x12( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c index bc7a125e07..a153dd4bf1 100644 --- a/keyboards/telophase/matrix.c +++ b/keyboards/telophase/matrix.c @@ -15,86 +15,18 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include -#include -#if defined(__AVR__) -#include -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" + +#include "quantum.h" #include "matrix.h" -#include "timer.h" #include "protocol/serial.h" -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - - matrix_init_quantum(); +void matrix_init_custom(void) { serial_init(); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix SERIAL_UART_DATA = 's'; @@ -107,9 +39,9 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!SERIAL_UART_RXD_PRESENT) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } @@ -118,47 +50,16 @@ uint8_t matrix_scan(void) //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[11] == 0xE0) - { + if (uart_data[11] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<. +*/ + #include "telophase.h" void led_init(void) { - DDRD |= (1<<1); - PORTD |= (1<<1); - DDRF |= (1<<4) | (1<<5); - PORTF |= (1<<4) | (1<<5); + setPinOutput(D1); + setPinOutput(F4); + setPinOutput(F5); + writePinHigh(D1); + writePinHigh(F4); + writePinHigh(F5); } - void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init(); + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init(); } #ifdef SWAP_HANDS_ENABLE __attribute__ ((weak)) const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { -{{12, 0}, {11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, -{{12, 1}, {11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, -{{12, 2}, {11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, -{{12, 3}, {11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, + {{12, 0}, {11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{12, 1}, {11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{12, 2}, {11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{12, 3}, {11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}} }; #endif diff --git a/keyboards/telophase/telophase.h b/keyboards/telophase/telophase.h index 458ea35da7..8ca6744176 100644 --- a/keyboards/telophase/telophase.h +++ b/keyboards/telophase/telophase.h @@ -1,14 +1,30 @@ -#ifndef TELOPHASE_H -#define TELOPHASE_H +/* +Copyright 2021 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once #include "quantum.h" -#define red_led_off PORTF |= (1<<5) -#define red_led_on PORTF &= ~(1<<5) -#define blu_led_off PORTF |= (1<<4) -#define blu_led_on PORTF &= ~(1<<4) -#define grn_led_off PORTD |= (1<<1) -#define grn_led_on PORTD &= ~(1<<1) +#define red_led_off writePinHigh(F5) +#define red_led_on writePinLow(F5) +#define blu_led_off writePinHigh(F4) +#define blu_led_on writePinLow(F4) +#define grn_led_off writePinHigh(D1) +#define grn_led_on writePinLow(D1) #define set_led_off red_led_off; grn_led_off; blu_led_off #define set_led_red red_led_on; grn_led_off; blu_led_off @@ -19,46 +35,19 @@ #define set_led_cyan red_led_off; grn_led_on; blu_led_on #define set_led_white red_led_on; grn_led_on; blu_led_on -/* -#define LED_B 5 -#define LED_R 6 -#define LED_G 7 - -#define all_leds_off PORTF &= ~(1<