From 2d8dcf08e8981a30f2430a8794ff5013c56cfdd4 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Tue, 12 Oct 2021 11:41:50 +0900 Subject: [Keyboard] Add "Center x Enter" (#14790) Co-authored-by: Drashna Jaelre --- keyboards/takashicompany/center_enter/readme.md | 29 +++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 keyboards/takashicompany/center_enter/readme.md (limited to 'keyboards/takashicompany/center_enter/readme.md') diff --git a/keyboards/takashicompany/center_enter/readme.md b/keyboards/takashicompany/center_enter/readme.md new file mode 100644 index 0000000000..d8db5cc7eb --- /dev/null +++ b/keyboards/takashicompany/center_enter/readme.md @@ -0,0 +1,29 @@ +# Center x Enter + +![image](https://raw.githubusercontent.com/takashicompany/center-enter/master/images/qmk.jpg) + +A 30% keyboard with the enter key placed in the center. +Option to install a rotary encoder is also available. +VIA (Remap) is also supported. + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: Center x Enter PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/center-enter + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/center_enter:default + +Flashing example for this keyboard: + + make takashicompany/center_enter:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available -- cgit v1.2.3