From 3744a2b641628c8e1646ce743c07934314357c51 Mon Sep 17 00:00:00 2001 From: Jumail Mundekkat Date: Fri, 28 Dec 2018 03:40:33 +1100 Subject: Added Skog TKL support (#4727) * Added Skog TKL support * Updated manufacturer/product name --- keyboards/skog/README.md | 61 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 keyboards/skog/README.md (limited to 'keyboards/skog/README.md') diff --git a/keyboards/skog/README.md b/keyboards/skog/README.md new file mode 100644 index 0000000000..51a792b6bd --- /dev/null +++ b/keyboards/skog/README.md @@ -0,0 +1,61 @@ +Skog TKL by Percent +========================== + +Keyboard Maintainer: QMK Community +Hardware Supported: Skog PCB +Hardware Availability: https://geekhack.org/index.php?topic=87953.0 + +Make example for this keyboard (after setting up your build environment): + + make skog:default + +## Setting the board to bootloader mode + +If you're lucky, the programming script does this automagically for you. If +however this doesn't work for you, you need to enter the bootloader mode manually +by plugging the keyboard in while holding the bootloader key. If you did this +correctly the LEDs will blink and you'll be able to flash your firmware. + +The bootloader key is in the top-right (Pause). + +## Flashing + +ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + +Windows: +1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +2. Place your keyboard into reset. +3. Press the `Find Device` button and ensure that your keyboard is found. +4. Press the `Open .hex File` button and locate the `.hex` file you created. +5. Press the `Flash Device` button and wait for the process to complete. + +macOS: +1. Install homebrew by typing the following: + ``` + /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + ``` +2. Install `crosspack-avr`. + ``` + brew cask install crosspack-avr + ``` +3. Install the following packages: + ``` + brew install python + brew install pyusb + brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + +4. Place your keyboard into reset. +5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Troubleshooting + +From my experience, it's really hard to brick these boards. But these +tricks have been useful when it got stuck in a weird scenario. + +1. Try plugging the board in while holding the bootloader key. This will force + it to boot only the bootloader without loading the firmware. Once this is + done, just reflash the board with the original firmware. +2. Sometimes USB hubs can act weird, so try connecting the board directly + to your computer or plugging/unplugging the USB hub. -- cgit v1.2.3