From 649b33d7783cf3021928534b7ae127e0a89e8807 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Tue, 21 Jun 2016 22:39:54 -0400 Subject: Renames keyboard folder to keyboards, adds couple of tmk's fixes (#432) * fixes from tmk's repo * rename keyboard to keyboards --- keyboards/sixkeyboard/README.md | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 keyboards/sixkeyboard/README.md (limited to 'keyboards/sixkeyboard/README.md') diff --git a/keyboards/sixkeyboard/README.md b/keyboards/sixkeyboard/README.md new file mode 100644 index 0000000000..7d78a0cae5 --- /dev/null +++ b/keyboards/sixkeyboard/README.md @@ -0,0 +1,18 @@ +# Techkeys SixKeyBoard + +[Get one here!](http://techkeys.us/collections/accessories/products/sixkeyboard) + +The schematic is like this: + +``` + switches leds +,--+--+--. ,--+--+--. +|C7|B7|B5| |C6|B6|B4| ++--+--+--+ +--+--+--+ +|D6|D1|D4| |D5|D2|D3| +`--+--+--' `--+--+--' +``` + +The LED on the bottom is `C4`. All 7 of the leds are turned on when the keyboard boots-up in the `sixkeyboard.c` file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit. + +There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object. \ No newline at end of file -- cgit v1.2.3