From 6d7c6d4fd6a4af8e0355b5d10c68db3274c1a7f8 Mon Sep 17 00:00:00 2001 From: fauxpark Date: Tue, 29 Oct 2019 06:08:00 +1100 Subject: Cleanup rules.mk for 32U4 keyboards, R-S (#7182) --- keyboards/redscarf_iiplus/verb/rules.mk | 51 ++----------------------------- keyboards/redscarf_iiplus/verc/rules.mk | 53 ++------------------------------- 2 files changed, 5 insertions(+), 99 deletions(-) (limited to 'keyboards/redscarf_iiplus') diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk index 6ee7fe4383..169e69d39f 100755 --- a/keyboards/redscarf_iiplus/verb/rules.mk +++ b/keyboards/redscarf_iiplus/verb/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk index 5a7706b487..e62b78dc65 100755 --- a/keyboards/redscarf_iiplus/verc/rules.mk +++ b/keyboards/redscarf_iiplus/verc/rules.mk @@ -1,63 +1,16 @@ # MCU name MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Bootloader selection # Teensy halfkay # Pro Micro caterina # Atmel DFU atmel-dfu # LUFA DFU lufa-dfu # QMK DFU qmk-dfu -# atmega32a bootloadHID +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = qmk-dfu - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - # Build Options # change yes to no to disable # @@ -82,4 +35,4 @@ HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) CUSTOM_MATRIX = yes SRC += matrix.c -LAYOUTS = 65_ansi \ No newline at end of file +LAYOUTS = 65_ansi -- cgit v1.2.3 From d50d6f678f49de7e3626827052876283b84c927f Mon Sep 17 00:00:00 2001 From: alittlepeace Date: Thu, 14 Nov 2019 02:04:57 -0600 Subject: Adding verd layout to RSII (#7296) * verd verd * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keymap.c * Update keymap.c * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update rules.mk * Update rules.mk * Delete tests.txt * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update config.h * Update verd.h * Update keymap.c * Update keymap.c * Update readme.md * Update matrix.c * Update readme.md * Update verd.h * Update verd.c * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/config.h Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/config.h Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keymap.c * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keymap.c * Update verd.h * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keymap.c * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.h Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.h Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.c Co-Authored-By: fauxpark * Update keymap.c * Update verd.c * Update config.h * Update verd.h added regular non split 0 * Update keymap.c * Update keyboards/redscarf_iiplus/verd/rules.mk Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update rules.mk * Update rules.mk * Update rules.mk * Update keymap.c * Update keymap.c * Update keymap.c * Update rules.mk * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keymap.c * Update keymap.c * Update keyboards/redscarf_iiplus/verd/readme.md Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/matrix.c Co-Authored-By: fauxpark * Update info.json * Update info.json * Update info.json * Update keyboards/redscarf_iiplus/verd/verd.h Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/verd.h Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark * Update keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c Co-Authored-By: fauxpark --- keyboards/redscarf_iiplus/verd/config.h | 251 +++++++++++++ keyboards/redscarf_iiplus/verd/info.json | 190 ++++++++++ .../verd/keymaps/alittlepeace/keymap.c | 81 +++++ .../redscarf_iiplus/verd/keymaps/default/keymap.c | 37 ++ .../redscarf_iiplus/verd/keymaps/default/readme.md | 1 + keyboards/redscarf_iiplus/verd/matrix.c | 391 +++++++++++++++++++++ keyboards/redscarf_iiplus/verd/readme.md | 24 ++ keyboards/redscarf_iiplus/verd/rules.mk | 36 ++ keyboards/redscarf_iiplus/verd/verd.c | 42 +++ keyboards/redscarf_iiplus/verd/verd.h | 55 +++ 10 files changed, 1108 insertions(+) create mode 100644 keyboards/redscarf_iiplus/verd/config.h create mode 100644 keyboards/redscarf_iiplus/verd/info.json create mode 100644 keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c create mode 100644 keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c create mode 100644 keyboards/redscarf_iiplus/verd/keymaps/default/readme.md create mode 100644 keyboards/redscarf_iiplus/verd/matrix.c create mode 100644 keyboards/redscarf_iiplus/verd/readme.md create mode 100644 keyboards/redscarf_iiplus/verd/rules.mk create mode 100644 keyboards/redscarf_iiplus/verd/verd.c create mode 100644 keyboards/redscarf_iiplus/verd/verd.h (limited to 'keyboards/redscarf_iiplus') diff --git a/keyboards/redscarf_iiplus/verd/config.h b/keyboards/redscarf_iiplus/verd/config.h new file mode 100644 index 0000000000..5c19f2abe5 --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/config.h @@ -0,0 +1,251 @@ +/* +Copyright 2019 Andy Lee +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x7778 +#define DEVICE_VER 0x0001 +#define MANUFACTURER RedScarf +#define PRODUCT RedScarfII+ +#define DESCRIPTION QMK Firmware for the RedScarf II+ + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { } +#define MATRIX_COL_PINS { F4, F1, F0, B3, D0, D1, D4, D5, D6, D7, F7, F6, D2, D3, B6, B5, B4, F5 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/redscarf_iiplus/verd/info.json b/keyboards/redscarf_iiplus/verd/info.json new file mode 100644 index 0000000000..e0ea3f134a --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/info.json @@ -0,0 +1,190 @@ +{ + "keyboard_name": "Red Scarf II+ Ver D", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT_60_ansi_numpad_split0": { + "key_count": 79, + "layout": [ + + {"label":"~", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Num Lock", "x":15, "y":0}, + {"label":"/", "x":16, "y":0}, + {"label":"*", "x":17, "y":0}, + {"label":"-", "x":18, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"7", "x":15, "y":1}, + {"label":"8", "x":16, "y":1}, + {"label":"9", "x":17, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"4", "x":15, "y":2}, + {"label":"5", "x":16, "y":2}, + {"label":"6", "x":17, "y":2}, + {"label":"+", "x":18, "y":1, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + {"label":"1", "x":15, "y":3}, + {"label":"2", "x":16, "y":3}, + {"label":"3", "x":17, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}, + + {"label":"0", "x":15, "y":4}, + {"label":"0", "x":16, "y":4}, + {"label":".", "x":17, "y":4}, + {"label":"Enter", "x":18, "y":3, "h":2} + ] + + }, + "LAYOUT_60_ansi_numpad": { + "key_count": 78, + "layout": [ + + {"label":"~", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Num Lock", "x":15, "y":0}, + {"label":"/", "x":16, "y":0}, + {"label":"*", "x":17, "y":0}, + {"label":"-", "x":18, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"7", "x":15, "y":1}, + {"label":"8", "x":16, "y":1}, + {"label":"9", "x":17, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"4", "x":15, "y":2}, + {"label":"5", "x":16, "y":2}, + {"label":"6", "x":17, "y":2}, + {"label":"+", "x":18, "y":1, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + {"label":"1", "x":15, "y":3}, + {"label":"2", "x":16, "y":3}, + {"label":"3", "x":17, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}, + + {"label":"0", "x":15, "y":4, "w":2}, + {"label":".", "x":17, "y":4}, + {"label":"Enter", "x":18, "y":3, "h":2} + ] + } + + } +} diff --git a/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c b/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c new file mode 100644 index 0000000000..9c4fee8a6f --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c @@ -0,0 +1,81 @@ +/* Copyright 2019 Andy Lee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_P00 = SAFE_RANGE, + +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_numpad_split0( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_HOME, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, KC_END, KC_PGDN, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, C(S(KC_TAB)), KC_UP, LCTL(KC_TAB), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PENT + ), + + [1] = LAYOUT_60_ansi_numpad_split0( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, + _______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_P00, KC_DOT, _______ + ), + + [2] = LAYOUT_60_ansi_numpad_split0( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_P00: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + case TG(1): + if (record->event.pressed) { + tap_code(KC_NUMLOCK); + return true; + } + break; + + } + return true; +} + +void matrix_init_user (void) { + if (!host_keyboard_led_state ().num_lock) { + tap_code(KC_NUMLOCK); + } +} + +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + layer_on(1); + } else { + layer_off(1); + } + return true; +} diff --git a/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c b/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c new file mode 100644 index 0000000000..b0bbeeea07 --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2019 Andy Lee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_numpad( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT_60_ansi_numpad( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + diff --git a/keyboards/redscarf_iiplus/verd/keymaps/default/readme.md b/keyboards/redscarf_iiplus/verd/keymaps/default/readme.md new file mode 100644 index 0000000000..cf396a4255 --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for the Red Scarf II+ ver D. diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c new file mode 100644 index 0000000000..28568653c5 --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/matrix.c @@ -0,0 +1,391 @@ +/* +Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar +Port done by Andy Lee +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include +#include +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "debounce.h" +#include "quantum.h" + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#elif (MATRIX_COLS <= 16) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop16(matrix[i]) +# define ROW_SHIFTER ((uint16_t)1) +#elif (MATRIX_COLS <= 32) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop32(matrix[i]) +# define ROW_SHIFTER ((uint32_t)1) +#endif + +#ifdef MATRIX_MASKED + extern const matrix_row_t matrix_mask[]; +#endif + +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) +// static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values +static matrix_row_t matrix[MATRIX_ROWS]; //debounced values + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) { + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) { + return MATRIX_COLS; +} + +//Deprecated. +bool matrix_is_modified(void) +{ + if (debounce_active()) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1< + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "verd.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(C7); + writePinHigh(C7); + setPinOutput(E6); + writePinHigh(E6); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(C7, !led_state.caps_lock); + writePin(E6, !led_state.num_lock); + } + return true; +} diff --git a/keyboards/redscarf_iiplus/verd/verd.h b/keyboards/redscarf_iiplus/verd/verd.h new file mode 100644 index 0000000000..b96dd0f6b3 --- /dev/null +++ b/keyboards/redscarf_iiplus/verd/verd.h @@ -0,0 +1,55 @@ +/* Copyright 2019 Andy Lee + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_60_ansi_numpad_split0( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, K215, K216, K217, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K314, K315, K316, \ + K400, K401, K402, K409, K410, K411, K412, K413, K414, K415, K416, K417 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K217 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, ____, K213, K214, K215, K216, ____ }, \ + { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, K314, K315, K316, ____ }, \ + { K400, K401, K402, ____, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414, K415, K416, K417 } \ +} + +#define LAYOUT_60_ansi_numpad( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, K215, K216, K217, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K314, K315, K316, \ + K400, K401, K402, K409, K410, K411, K412, K413, K414, K416, K417 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K217 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, ____, K213, K214, K215, K216, ____ }, \ + { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, K314, K315, K316, ____ }, \ + { K400, K401, K402, ____, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414, ____, K416, K417 } \ +} -- cgit v1.2.3 From 1f332968a5c0f6de1f375a4977955925a90084c2 Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Thu, 14 Nov 2019 08:08:07 +0000 Subject: format code according to conventions [skip ci] --- keyboards/redscarf_iiplus/verd/info.json | 380 ++++++++++----------- .../verd/keymaps/alittlepeace/keymap.c | 162 ++++----- .../redscarf_iiplus/verd/keymaps/default/keymap.c | 74 ++-- keyboards/redscarf_iiplus/verd/verd.c | 84 ++--- 4 files changed, 350 insertions(+), 350 deletions(-) (limited to 'keyboards/redscarf_iiplus') diff --git a/keyboards/redscarf_iiplus/verd/info.json b/keyboards/redscarf_iiplus/verd/info.json index e0ea3f134a..65152a341c 100644 --- a/keyboards/redscarf_iiplus/verd/info.json +++ b/keyboards/redscarf_iiplus/verd/info.json @@ -1,190 +1,190 @@ -{ - "keyboard_name": "Red Scarf II+ Ver D", - "url": "", - "maintainer": "qmk", - "width": 19, - "height": 5, - "layouts": { - "LAYOUT_60_ansi_numpad_split0": { - "key_count": 79, - "layout": [ - - {"label":"~", "x":0, "y":0}, - {"label":"!", "x":1, "y":0}, - {"label":"@", "x":2, "y":0}, - {"label":"#", "x":3, "y":0}, - {"label":"$", "x":4, "y":0}, - {"label":"%", "x":5, "y":0}, - {"label":"^", "x":6, "y":0}, - {"label":"&", "x":7, "y":0}, - {"label":"*", "x":8, "y":0}, - {"label":"(", "x":9, "y":0}, - {"label":")", "x":10, "y":0}, - {"label":"_", "x":11, "y":0}, - {"label":"+", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":2}, - {"label":"Num Lock", "x":15, "y":0}, - {"label":"/", "x":16, "y":0}, - {"label":"*", "x":17, "y":0}, - {"label":"-", "x":18, "y":0}, - - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"{", "x":11.5, "y":1}, - {"label":"}", "x":12.5, "y":1}, - {"label":"|", "x":13.5, "y":1, "w":1.5}, - {"label":"7", "x":15, "y":1}, - {"label":"8", "x":16, "y":1}, - {"label":"9", "x":17, "y":1}, - - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":":", "x":10.75, "y":2}, - {"label":"\"", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"4", "x":15, "y":2}, - {"label":"5", "x":16, "y":2}, - {"label":"6", "x":17, "y":2}, - {"label":"+", "x":18, "y":1, "h":2}, - - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":"<", "x":9.25, "y":3}, - {"label":">", "x":10.25, "y":3}, - {"label":"?", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":2.75}, - {"label":"1", "x":15, "y":3}, - {"label":"2", "x":16, "y":3}, - {"label":"3", "x":17, "y":3}, - - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, - {"label":"Win", "x":1.25, "y":4, "w":1.25}, - {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"x":3.75, "y":4, "w":6.25}, - {"label":"Alt", "x":10, "y":4, "w":1.25}, - {"label":"Win", "x":11.25, "y":4, "w":1.25}, - {"label":"Menu", "x":12.5, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}, - - {"label":"0", "x":15, "y":4}, - {"label":"0", "x":16, "y":4}, - {"label":".", "x":17, "y":4}, - {"label":"Enter", "x":18, "y":3, "h":2} - ] - - }, - "LAYOUT_60_ansi_numpad": { - "key_count": 78, - "layout": [ - - {"label":"~", "x":0, "y":0}, - {"label":"!", "x":1, "y":0}, - {"label":"@", "x":2, "y":0}, - {"label":"#", "x":3, "y":0}, - {"label":"$", "x":4, "y":0}, - {"label":"%", "x":5, "y":0}, - {"label":"^", "x":6, "y":0}, - {"label":"&", "x":7, "y":0}, - {"label":"*", "x":8, "y":0}, - {"label":"(", "x":9, "y":0}, - {"label":")", "x":10, "y":0}, - {"label":"_", "x":11, "y":0}, - {"label":"+", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":2}, - {"label":"Num Lock", "x":15, "y":0}, - {"label":"/", "x":16, "y":0}, - {"label":"*", "x":17, "y":0}, - {"label":"-", "x":18, "y":0}, - - {"label":"Tab", "x":0, "y":1, "w":1.5}, - {"label":"Q", "x":1.5, "y":1}, - {"label":"W", "x":2.5, "y":1}, - {"label":"E", "x":3.5, "y":1}, - {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - {"label":"P", "x":10.5, "y":1}, - {"label":"{", "x":11.5, "y":1}, - {"label":"}", "x":12.5, "y":1}, - {"label":"|", "x":13.5, "y":1, "w":1.5}, - {"label":"7", "x":15, "y":1}, - {"label":"8", "x":16, "y":1}, - {"label":"9", "x":17, "y":1}, - - {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, - {"label":"A", "x":1.75, "y":2}, - {"label":"S", "x":2.75, "y":2}, - {"label":"D", "x":3.75, "y":2}, - {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, - {"label":":", "x":10.75, "y":2}, - {"label":"\"", "x":11.75, "y":2}, - {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"4", "x":15, "y":2}, - {"label":"5", "x":16, "y":2}, - {"label":"6", "x":17, "y":2}, - {"label":"+", "x":18, "y":1, "h":2}, - - {"label":"Shift", "x":0, "y":3, "w":2.25}, - {"label":"Z", "x":2.25, "y":3}, - {"label":"X", "x":3.25, "y":3}, - {"label":"C", "x":4.25, "y":3}, - {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":"<", "x":9.25, "y":3}, - {"label":">", "x":10.25, "y":3}, - {"label":"?", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":2.75}, - {"label":"1", "x":15, "y":3}, - {"label":"2", "x":16, "y":3}, - {"label":"3", "x":17, "y":3}, - - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, - {"label":"Win", "x":1.25, "y":4, "w":1.25}, - {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"x":3.75, "y":4, "w":6.25}, - {"label":"Alt", "x":10, "y":4, "w":1.25}, - {"label":"Win", "x":11.25, "y":4, "w":1.25}, - {"label":"Menu", "x":12.5, "y":4, "w":1.25}, - {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}, - - {"label":"0", "x":15, "y":4, "w":2}, - {"label":".", "x":17, "y":4}, - {"label":"Enter", "x":18, "y":3, "h":2} - ] - } - - } -} +{ + "keyboard_name": "Red Scarf II+ Ver D", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT_60_ansi_numpad_split0": { + "key_count": 79, + "layout": [ + + {"label":"~", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Num Lock", "x":15, "y":0}, + {"label":"/", "x":16, "y":0}, + {"label":"*", "x":17, "y":0}, + {"label":"-", "x":18, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"7", "x":15, "y":1}, + {"label":"8", "x":16, "y":1}, + {"label":"9", "x":17, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"4", "x":15, "y":2}, + {"label":"5", "x":16, "y":2}, + {"label":"6", "x":17, "y":2}, + {"label":"+", "x":18, "y":1, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + {"label":"1", "x":15, "y":3}, + {"label":"2", "x":16, "y":3}, + {"label":"3", "x":17, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}, + + {"label":"0", "x":15, "y":4}, + {"label":"0", "x":16, "y":4}, + {"label":".", "x":17, "y":4}, + {"label":"Enter", "x":18, "y":3, "h":2} + ] + + }, + "LAYOUT_60_ansi_numpad": { + "key_count": 78, + "layout": [ + + {"label":"~", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Num Lock", "x":15, "y":0}, + {"label":"/", "x":16, "y":0}, + {"label":"*", "x":17, "y":0}, + {"label":"-", "x":18, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"7", "x":15, "y":1}, + {"label":"8", "x":16, "y":1}, + {"label":"9", "x":17, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"4", "x":15, "y":2}, + {"label":"5", "x":16, "y":2}, + {"label":"6", "x":17, "y":2}, + {"label":"+", "x":18, "y":1, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + {"label":"1", "x":15, "y":3}, + {"label":"2", "x":16, "y":3}, + {"label":"3", "x":17, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}, + + {"label":"0", "x":15, "y":4, "w":2}, + {"label":".", "x":17, "y":4}, + {"label":"Enter", "x":18, "y":3, "h":2} + ] + } + + } +} diff --git a/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c b/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c index 9c4fee8a6f..df26eec6cc 100644 --- a/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c +++ b/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c @@ -1,81 +1,81 @@ -/* Copyright 2019 Andy Lee - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - KC_P00 = SAFE_RANGE, - -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_60_ansi_numpad_split0( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, TG(1), KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_HOME, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, KC_END, KC_PGDN, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, C(S(KC_TAB)), KC_UP, LCTL(KC_TAB), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PENT - ), - - [1] = LAYOUT_60_ansi_numpad_split0( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, - _______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_P00, KC_DOT, _______ - ), - - [2] = LAYOUT_60_ansi_numpad_split0( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), -}; -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case KC_P00: - if (record->event.pressed) { - SEND_STRING("00"); - } - break; - case TG(1): - if (record->event.pressed) { - tap_code(KC_NUMLOCK); - return true; - } - break; - - } - return true; -} - -void matrix_init_user (void) { - if (!host_keyboard_led_state ().num_lock) { - tap_code(KC_NUMLOCK); - } -} - -bool led_update_user(led_t led_state) { - if (led_state.num_lock) { - layer_on(1); - } else { - layer_off(1); - } - return true; -} +/* Copyright 2019 Andy Lee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_P00 = SAFE_RANGE, + +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_numpad_split0( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_HOME, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, KC_END, KC_PGDN, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, C(S(KC_TAB)), KC_UP, LCTL(KC_TAB), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PENT + ), + + [1] = LAYOUT_60_ansi_numpad_split0( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_7, KC_8, KC_9, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_4, KC_5, KC_6, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, + _______, _______, _______, _______, _______, _______, _______, _______, KC_0, KC_P00, KC_DOT, _______ + ), + + [2] = LAYOUT_60_ansi_numpad_split0( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_P00: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + case TG(1): + if (record->event.pressed) { + tap_code(KC_NUMLOCK); + return true; + } + break; + + } + return true; +} + +void matrix_init_user (void) { + if (!host_keyboard_led_state ().num_lock) { + tap_code(KC_NUMLOCK); + } +} + +bool led_update_user(led_t led_state) { + if (led_state.num_lock) { + layer_on(1); + } else { + layer_off(1); + } + return true; +} diff --git a/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c b/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c index b0bbeeea07..7bf7eb7c66 100644 --- a/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c +++ b/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c @@ -1,37 +1,37 @@ -/* Copyright 2019 Andy Lee - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include QMK_KEYBOARD_H - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT_60_ansi_numpad( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_P0, KC_PDOT, KC_PENT - ), - - [1] = LAYOUT_60_ansi_numpad( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), -}; - +/* Copyright 2019 Andy Lee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_numpad( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT_60_ansi_numpad( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + diff --git a/keyboards/redscarf_iiplus/verd/verd.c b/keyboards/redscarf_iiplus/verd/verd.c index 6d2a8c97c9..c16a5a9740 100644 --- a/keyboards/redscarf_iiplus/verd/verd.c +++ b/keyboards/redscarf_iiplus/verd/verd.c @@ -1,42 +1,42 @@ -/* Copyright 2019 Andy Lee - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "verd.h" - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); - led_init_ports(); -} - -void led_init_ports(void) { - setPinOutput(C7); - writePinHigh(C7); - setPinOutput(E6); - writePinHigh(E6); -} - -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - writePin(C7, !led_state.caps_lock); - writePin(E6, !led_state.num_lock); - } - return true; -} +/* Copyright 2019 Andy Lee + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "verd.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(C7); + writePinHigh(C7); + setPinOutput(E6); + writePinHigh(E6); +} + +bool led_update_kb(led_t led_state) { + if (led_update_user(led_state)) { + writePin(C7, !led_state.caps_lock); + writePin(E6, !led_state.num_lock); + } + return true; +} -- cgit v1.2.3