From 13bb6b4b7fdd2b3e419d0f89c93fb980b00eeb9b Mon Sep 17 00:00:00 2001
From: Jack Humbert <jack.humb@gmail.com>
Date: Thu, 23 Jun 2016 22:18:20 -0400
Subject: Backlight abstraction and other changes (#439)

* redoes matrix pins, abstracts backlight code for B5,6,7

* slimming down keyboard stuff, backlight breathing implemented

* don't call backlight init when no pin

* cleans up user/kb/quantum calls, keyboard files

* fix pvc atomic

* replaces CHANNEL with correct var in breathing

* removes .hexs, updates readmes, updates template

* cleans-up clueboards, readmes to lowercase

* updates readme
---
 keyboards/preonic/preonic.c | 89 +--------------------------------------------
 1 file changed, 1 insertion(+), 88 deletions(-)

(limited to 'keyboards/preonic/preonic.c')

diff --git a/keyboards/preonic/preonic.c b/keyboards/preonic/preonic.c
index 773451bf0c..889c3fc8fd 100644
--- a/keyboards/preonic/preonic.c
+++ b/keyboards/preonic/preonic.c
@@ -1,97 +1,10 @@
 #include "preonic.h"
 
-__attribute__ ((weak))
-void matrix_init_user(void) {
-
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-
-};
-
-__attribute__ ((weak))
-bool process_action_user(keyrecord_t *record) {
-    return true;
-};
-
 void matrix_init_kb(void) {
-	#ifdef BACKLIGHT_ENABLE
-    	backlight_init_ports();
-	#endif
 
     // Turn status LED on
     DDRE |= (1<<6);
     PORTE |= (1<<6);
 
 	matrix_init_user();
-};
-
-void matrix_scan_kb(void) {
-	matrix_scan_user();
-};
-
-bool process_action_kb(keyrecord_t *record) {
-	return process_action_user(record);
-}
-
-#ifdef BACKLIGHT_ENABLE
-#define CHANNEL OCR1C
-
-void backlight_init_ports()
-{
-
-    // Setup PB7 as output and output low.
-    DDRB |= (1<<7);
-    PORTB &= ~(1<<7);
-
-    // Use full 16-bit resolution.
-    ICR1 = 0xFFFF;
-
-    // I could write a wall of text here to explain... but TL;DW
-    // Go read the ATmega32u4 datasheet.
-    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-
-    // Pin PB7 = OCR1C (Timer 1, Channel C)
-    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
-    // (i.e. start high, go low when counter matches.)
-    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-
-    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
-    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-
-    backlight_init();
-}
-
-void backlight_set(uint8_t level)
-{
-    if ( level == 0 )
-    {
-        // Turn off PWM control on PB7, revert to output low.
-        TCCR1A &= ~(_BV(COM1C1));
-        CHANNEL = 0x0;
-        // Prevent backlight blink on lowest level
-        PORTB &= ~(_BV(PORTB7));
-    }
-    else if ( level == BACKLIGHT_LEVELS )
-    {
-        // Prevent backlight blink on lowest level
-        PORTB &= ~(_BV(PORTB7));
-        // Turn on PWM control of PB7
-        TCCR1A |= _BV(COM1C1);
-        // Set the brightness
-        CHANNEL = 0xFFFF;
-    }
-    else
-    {
-        // Prevent backlight blink on lowest level
-        PORTB &= ~(_BV(PORTB7));
-        // Turn on PWM control of PB7
-        TCCR1A |= _BV(COM1C1);
-        // Set the brightness
-        CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
-    }
-}
-
-#endif
+};
\ No newline at end of file
-- 
cgit v1.2.3