From 154d35ac146422bef938ed9756f6e0012baa83a2 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Sat, 6 Aug 2022 23:23:35 +1000 Subject: Remove `UNUSED_PINS` (#17931) --- keyboards/ploopyco/mouse/config.h | 2 +- keyboards/ploopyco/mouse/mouse.c | 4 ++-- keyboards/ploopyco/trackball/rev1/config.h | 2 +- keyboards/ploopyco/trackball/rev1_005/config.h | 2 +- keyboards/ploopyco/trackball/trackball.c | 4 ++-- keyboards/ploopyco/trackball_mini/rev1_001/config.h | 2 +- keyboards/ploopyco/trackball_mini/rev1_002/config.h | 2 +- keyboards/ploopyco/trackball_mini/trackball_mini.c | 4 ++-- keyboards/ploopyco/trackball_nano/rev1_001/config.h | 2 +- keyboards/ploopyco/trackball_nano/trackball_nano.c | 4 ++-- 10 files changed, 14 insertions(+), 14 deletions(-) (limited to 'keyboards/ploopyco') diff --git a/keyboards/ploopyco/mouse/config.h b/keyboards/ploopyco/mouse/config.h index e74e9dee83..6a6713557b 100644 --- a/keyboards/ploopyco/mouse/config.h +++ b/keyboards/ploopyco/mouse/config.h @@ -41,7 +41,7 @@ // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default -#define UNUSED_PINS \ +#define UNUSABLE_PINS \ { B4, D6, F1, F5, F6, F7 } /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/ploopyco/mouse/mouse.c b/keyboards/ploopyco/mouse/mouse.c index 25ebd1ee2d..7caba1e1bb 100644 --- a/keyboards/ploopyco/mouse/mouse.c +++ b/keyboards/ploopyco/mouse/mouse.c @@ -199,8 +199,8 @@ void keyboard_pre_init_kb(void) { * pathways to ground. If you're messing with this, know this: driving ANY * of these pins high will cause a short. On the MCU. Ka-blooey. */ -#ifdef UNUSED_PINS - const pin_t unused_pins[] = UNUSED_PINS; +#ifdef UNUSABLE_PINS + const pin_t unused_pins[] = UNUSABLE_PINS; for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) { setPinOutput(unused_pins[i]); diff --git a/keyboards/ploopyco/trackball/rev1/config.h b/keyboards/ploopyco/trackball/rev1/config.h index 2908f09602..3db085baf2 100644 --- a/keyboards/ploopyco/trackball/rev1/config.h +++ b/keyboards/ploopyco/trackball/rev1/config.h @@ -35,7 +35,7 @@ // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default -#define UNUSED_PINS \ +#define UNUSABLE_PINS \ { D1, D3, B4, B6, B7, D6, C7, F6, F5, F3, F7 } // If board has a debug LED, you can enable it by defining this diff --git a/keyboards/ploopyco/trackball/rev1_005/config.h b/keyboards/ploopyco/trackball/rev1_005/config.h index 83e70181de..321e3004d1 100644 --- a/keyboards/ploopyco/trackball/rev1_005/config.h +++ b/keyboards/ploopyco/trackball/rev1_005/config.h @@ -35,7 +35,7 @@ // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default -#define UNUSED_PINS \ +#define UNUSABLE_PINS \ { D1, D3, B4, B7, D6, C7, F6, F5, F3, F7 } // If board has a debug LED, you can enable it by defining this diff --git a/keyboards/ploopyco/trackball/trackball.c b/keyboards/ploopyco/trackball/trackball.c index bda21b5c88..7a576a586d 100644 --- a/keyboards/ploopyco/trackball/trackball.c +++ b/keyboards/ploopyco/trackball/trackball.c @@ -204,8 +204,8 @@ void keyboard_pre_init_kb(void) { * pathways to ground. If you're messing with this, know this: driving ANY * of these pins high will cause a short. On the MCU. Ka-blooey. */ -#ifdef UNUSED_PINS - const pin_t unused_pins[] = UNUSED_PINS; +#ifdef UNUSABLE_PINS + const pin_t unused_pins[] = UNUSABLE_PINS; for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) { setPinOutput(unused_pins[i]); diff --git a/keyboards/ploopyco/trackball_mini/rev1_001/config.h b/keyboards/ploopyco/trackball_mini/rev1_001/config.h index 06720b8fdf..d4c9d23bec 100644 --- a/keyboards/ploopyco/trackball_mini/rev1_001/config.h +++ b/keyboards/ploopyco/trackball_mini/rev1_001/config.h @@ -36,5 +36,5 @@ // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default -#define UNUSED_PINS \ +#define UNUSABLE_PINS \ { B5, C7, D0, D1, D3, D5, D6, F1, F3, F5, F6, F7 } diff --git a/keyboards/ploopyco/trackball_mini/rev1_002/config.h b/keyboards/ploopyco/trackball_mini/rev1_002/config.h index 06720b8fdf..d4c9d23bec 100644 --- a/keyboards/ploopyco/trackball_mini/rev1_002/config.h +++ b/keyboards/ploopyco/trackball_mini/rev1_002/config.h @@ -36,5 +36,5 @@ // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default -#define UNUSED_PINS \ +#define UNUSABLE_PINS \ { B5, C7, D0, D1, D3, D5, D6, F1, F3, F5, F6, F7 } diff --git a/keyboards/ploopyco/trackball_mini/trackball_mini.c b/keyboards/ploopyco/trackball_mini/trackball_mini.c index e4b4a47c2b..03cba2200e 100644 --- a/keyboards/ploopyco/trackball_mini/trackball_mini.c +++ b/keyboards/ploopyco/trackball_mini/trackball_mini.c @@ -200,8 +200,8 @@ void keyboard_pre_init_kb(void) { * pathways to ground. If you're messing with this, know this: driving ANY * of these pins high will cause a short. On the MCU. Ka-blooey. */ -#ifdef UNUSED_PINS - const pin_t unused_pins[] = UNUSED_PINS; +#ifdef UNUSABLE_PINS + const pin_t unused_pins[] = UNUSABLE_PINS; for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) { setPinOutput(unused_pins[i]); diff --git a/keyboards/ploopyco/trackball_nano/rev1_001/config.h b/keyboards/ploopyco/trackball_nano/rev1_001/config.h index 6d265d7233..3bde88487a 100644 --- a/keyboards/ploopyco/trackball_nano/rev1_001/config.h +++ b/keyboards/ploopyco/trackball_nano/rev1_001/config.h @@ -33,5 +33,5 @@ // These pins are not broken out, and cannot be used normally. // They are set as output and pulled high, by default -#define UNUSED_PINS \ +#define UNUSABLE_PINS \ { B5, B6, C7, D0, D1, D2, D3, D4, D5, D6, D7, E6, F1, F3, F5, F6, F7 } diff --git a/keyboards/ploopyco/trackball_nano/trackball_nano.c b/keyboards/ploopyco/trackball_nano/trackball_nano.c index 0f2fbe2f72..eb1d8e10b0 100644 --- a/keyboards/ploopyco/trackball_nano/trackball_nano.c +++ b/keyboards/ploopyco/trackball_nano/trackball_nano.c @@ -86,8 +86,8 @@ void keyboard_pre_init_kb(void) { * pathways to ground. If you're messing with this, know this: driving ANY * of these pins high will cause a short. On the MCU. Ka-blooey. */ -#ifdef UNUSED_PINS - const pin_t unused_pins[] = UNUSED_PINS; +#ifdef UNUSABLE_PINS + const pin_t unused_pins[] = UNUSABLE_PINS; for (uint8_t i = 0; i < (sizeof(unused_pins) / sizeof(pin_t)); i++) { setPinOutput(unused_pins[i]); -- cgit v1.2.3